Hey XDA,
I installed Codename Android on my phone about 2 weeks ago. There are two real issues with this ROM:
1. Lack of CWM Recovery - can't flash anything.
2. My GPS NEVER locks. EVER.
I don't care so much about #1, because I like the look, feel, and performance of this ROM. However, #2 is devastating. I use my GPS all the time. I can still get some function out of it (it gets my location within several hundred feet) by using the turn by turn directions and trying to follow them, but it's not the same as seeing EXACTLY where I am and EXACTLY where and when I need to turn.
What I'm trying to say is that I've gotten lost twice already!!
I've heard of a few solutions -
1. All of the "GPS Status" tricks. This hasn't worked for me.
2. Using a program to set my GPS region (North America) and then another program to get a GPS Fix on my signal. After 15 minutes of waiting, no fix was gained and I uninstalled both.
3. Go back to a GB ROM, turn on GPS, get a GPS lock, then leave on GPS and re-install ICS ROM. I can't do this because as I mentioned earlier, this Codename Android ROM does not have a CWM recovery mode and I can't make a nandroid backup.
Does anyone know of a real solution to this problem?
Can't you just Odin or mobile Odin back to a gb rom, then use option 3 in your OP? If you're concerned that you have no Nandroid backup option for your app data this way, I think you can still use TB for everything, since your backup and eventual restoral with both be done while running ICS at the beginning and end of the process.
Well I guess I'd be willing to try it, though I have yet to do a TB with ICS so can't confirm it works 100%.
I'd be much more comfortable doing it if someone else has done the same. Anyone out there?
I've never been able to get a GPS lock with any rom other than stock. I've tried all sorts of tricks using scripts and whatever you can think of and never get a lock. The best I ever get is like a 2100 meter radius.
webbiam said:
Hey XDA,
I installed Codename Android on my phone about 2 weeks ago. There are two real issues with this ROM:
1. Lack of CWM Recovery - can't flash anything.
2. My GPS NEVER locks. EVER.
I don't care so much about #1, because I like the look, feel, and performance of this ROM. However, #2 is devastating. I use my GPS all the time. I can still get some function out of it (it gets my location within several hundred feet) by using the turn by turn directions and trying to follow them, but it's not the same as seeing EXACTLY where I am and EXACTLY where and when I need to turn.
What I'm trying to say is that I've gotten lost twice already!!
I've heard of a few solutions -
1. All of the "GPS Status" tricks. This hasn't worked for me.
2. Using a program to set my GPS region (North America) and then another program to get a GPS Fix on my signal. After 15 minutes of waiting, no fix was gained and I uninstalled both.
3. Go back to a GB ROM, turn on GPS, get a GPS lock, then leave on GPS and re-install ICS ROM. I can't do this because as I mentioned earlier, this Codename Android ROM does not have a CWM recovery mode and I can't make a nandroid backup.
Does anyone know of a real solution to this problem?
Click to expand...
Click to collapse
this is actually pretty easy to fix now seeing as code name comes with cwm now... this is what I've done many times... get Mobile odin and flash an old el26 kernel with cwm on it. When rebooting starts hold volume up and power button then in cwm make a backup of your current rom real quick. After that wipe all data and everything so you're clean and flash ANY gb rom and get a GPS lock that is very accurate! Once you have that lock leave GPS on and boot into recovery again... now restore your codename rom and reboot ( even though it still has the el26 kernel). Once it starts rebooting hold the buttons for recovery once again until it appears. Now wipe everything except data (calkulins modified wipe all (no data)). Flash your codename rom again over your last recovery and that wlll give you the new codename kernel (which does have cwm now). Now reboot and you will be back at the same rom u were except your GPS WILL WORK perfectly! Hope you try this buddy!! Goodluck!!!
Sent from my SPH-D710 using xda premium
clipsedrag said:
this is actually pretty easy to fix now seeing as code name comes with cwm now... this is what I've done many times... get Mobile odin and flash an old el26 kernel with cwm on it. When rebooting starts hold volume up and power button then in cwm make a backup of your current rom real quick. After that wipe all data and everything so you're clean and flash ANY gb rom and get a GPS lock that is very accurate! Once you have that lock leave GPS on and boot into recovery again... now restore your codename rom and reboot ( even though it still has the el26 kernel). Once it starts rebooting hold the buttons for recovery once again until it appears. Now wipe everything except data (calkulins modified wipe all (no data)). Flash your codename rom again over your last recovery and that wlll give you the new codename kernel (which does have cwm now). Now reboot and you will be back at the same rom u were except your GPS WILL WORK perfectly! Hope you try this buddy!! Goodluck!!!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
what codename rom did you flash??
i just flashed the latest one and it does not have cwm on it...
Cmon... use Odin or Mobile Odin to flash a stock CWM recovery. Boot to recovery. Nandroid. Flash GB ROM. Get GPS lock. Reboot to recovery immediately, flash stock CWM recovery, wipe and restore backup.
It takes 10-15 minutes.
This sounds like a quick fix...I'll try it when I have the time.
I'm also curious about clipsedrag's comment. Where did you get a Codename ROM with a recovery baked in? I'd love to upgrade.
Related
Hey everyone,
So this is my last ditch effort to attempt to save my device. I would really prefer not to perform another warranty exchange given that I am not under insurance, but I'm afraid I have no choice.
My phone was rooted and I was using Darkside without issues, as I had been for the past two weeks. I am always careful when I flash roms and I made sure to follow every possible protocol. That's the background information.
My battery life was running at approximately 6 percent yesterday and I sent a text message as normal, and it was stuck at sending. I tried turning wireless data off from the toggles in the pull-down and it was unresponsive. When I went to Wireless Network in the settings option, my phone rebooted. Once it started up again, my service would not come back, and the phone would continually bootloop once it got past the traditional "media scanner running", etc. My window of opportunity to do anything was really slim.
I charged my phone to see if it made a difference, but it didn't. Tried with my SIM card removed and it still bootlooped. I was able to get to CWM from the advanced power menu before it rebooted again and I fixed permissions and cleared cache and dalvik. Now the phone wouldn't even get past the boot animation before rebooting.
I put the phone into download mode and reverted back to stock using Odin. The phone now got past the boot animation in stock mode, but was unable to find service and after about 10 seconds fell into the same bootloop pattern. I tried removing the SD card but that didn't help either. Using Odin again, I reflashed recovery, followed by root and tried reinstalling a rom through CWM (I have only used regular CWM, not the touch version) with a superwipe to ensure a clean flash. Once again, it wouldn't make it past the boot animation before bootlooping. I reverted back to stock using Odin, and this is where I stand.
I have tried all traditional methods to salvage the phone and, for the life of me, I cannot understand what happened. The only thing I notice is that regardless of how long the phone stays on before rebooting, it is never able to find service. It's like the radio or modem broke and the phone has no other choice but to restart forever. But reflashing the stock UVKL1 should also reflash the proper modem and radio, right?
Has this ever happened to anyone? Any suggestions (aside from the typical reverting to stock) as to how I might be able to stop it? I searched but haven't been able to find a situation quite like this one. Thanks in advance for your help.
Really sorry to hear about your problem. Assuming the 2.3.6 stock image you flashed via Odin is the one provided by Przekret and that that didn't work, then I'd try one or both of these two longshots to try to clear possible corruption problems in either the kernel or modem spaces:
For each of the following wipe cache and Dalvik cache in CWM before flashing and again wipe Dalvik afterwards and also fix permissions:
1) Format system (do this 3x) under mounts & storage in CWM. Flash the standalone Darkside kernel X v1 final immediately after flashing, e.g., the current Darkside rom. (You'll need to wipe data, too, if not coming from a Darkside rom. Do not do any Superwipe - neither the standalone version nor using a flag.)
2) Flash the KID modem (do this 3x). Both Odin- and CWM-flashable versions are available. (You can always flash back to KL1 if the problem is fixed.)
Hope this is clear. It's late! These are both things that have helped get my phone out of troubles, though not as bad as yours. Good luck!
Sent from my SGH-T989 using XDA App
Also if u used the one from przekret then I'm almost positive that Odin package flashes the new radio too. If memory serves me right. Op let us know what happened
Thanks for your help. Unfortunately, nothing has worked. I'm on the phone with T-Mobile, I see no other solution but to get it exchanged under warranty and it's not getting here until March 15th, according to the representative. I suppose I'll just use a replacement phone in the meantime. It's just really weird and frustrating... I could understand a bad flash or something similar, but I followed every step accurately as I always have and everything was working just fine until it randomly decided to die without warning.
Well since you're getting another one anyways I would continue trying to fix this one, just in case you come up with a solution and for another worst case scenario for your new phone.
Powered by the SGSII....
I think your efs folder got corrupted. Its scary to see this happening so often. Many other users have also reported corrupted efs ....
Sent from my SGH-T989 using XDA
shehrammajid said:
I think your efs folder got corrupted. Its scary to see this happening so often. Many other users have also reported corrupted efs ....
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
Forgive me for asking, but what is the EFS folder?
I'm currently using 9-20120907-EXPERIMENTAL-d710-beta1 on my Samsung Epic 4G Touch, and no matter what I try, I cannot get the GPS to work. In Google maps it can find my general location, but will not lock on. I have tried countless apps, videos, threads, and ROMS, if anyone can help me I will be abundantly grateful. I have also tried manually flashing the GPS drivers (found from the [FIX][AOSP][MIUI] All GPS fixes! link) and none of them worked for me, I kept getting a "Status 0" error.
I have flashed and restored more times than I can count, anyone with experience in this issue?
EDIT:
FIXED! Check post 6 for fix
can you get a lock on stock?
matt99881 said:
I'm currently using 9-20120907-EXPERIMENTAL-d710-beta1 on my Samsung Epic 4G Touch, and no matter what I try, I cannot get the GPS to work. In Google maps it can find my general location, but will not lock on. I have tried countless apps, videos, threads, and ROMS, if anyone can help me I will be abundantly grateful. I have also tried manually flashing the GPS drivers (found from the [FIX][AOSP][MIUI] All GPS fixes! link) and none of them worked for me, I kept getting a "Status 0" error.
I have flashed and restored more times than I can count, anyone with experience in this issue?
Click to expand...
Click to collapse
I'm running the same setup as you, and mine is working fine. I have only been rooted for two weeks, but during my reading, I remember others having this issue. One thing that was suggested is that in between the mobile Odin and cwm steps use something like GPS Status to lock on your GPS before you install zips. You might want to do a search to get the exact steps, I have done so much reading the past few weeks, I can't remember where I saw it. Good luck!
Had the se issue had to make a backup. The flash back to stock el26 get a GPS lock then flash back should work after that
Sent from my SPH-D710 using xda app-developers app
calisro said:
can you get a lock on stock?
Click to expand...
Click to collapse
Yes, I get a lock immediately.
byrdcfmma said:
I'm running the same setup as you, and mine is working fine. I have only been rooted for two weeks, but during my reading, I remember others having this issue. One thing that was suggested is that in between the mobile Odin and cwm steps use something like GPS Status to lock on your GPS before you install zips. You might want to do a search to get the exact steps, I have done so much reading the past few weeks, I can't remember where I saw it. Good luck!
Click to expand...
Click to collapse
I can only get a lock before flashing CM9, after flashing CM9 I did download the GPS Status & Toolbox app, however even with that I could not get a lock. Perhaps I was not doing something correctly? Again any input would be great.
cas8180 said:
Had the se issue had to make a backup. The flash back to stock el26 get a GPS lock then flash back should work after that
Click to expand...
Click to collapse
So you're saying that if I restore, flash the EL26, open up Maps and get a GPS lock, then flash the CM9 ROM I should be good? I'll definitely have to try that when I get home.
matt99881 said:
So you're saying that if I restore, flash the EL26, open up Maps and get a GPS lock, then flash the CM9 ROM I should be good? I'll definitely have to try that when I get home.
Click to expand...
Click to collapse
You don't need to fully restore. Do this:
1. Setup multiboot rom. Use EL26 as it still works with the different kernels still. This link:
http://e4gtcm.blogspot.com/2012/05/temporary-stock-e4gt-from-emmc.html
You basically going to setup the files, flash the directboot-cwm from mobile odin or regular odin. Then when that reboots into cwm, flash the boot_el26.zip file...
2. In the stock temporary rom you just booted, go outside and get a lock. once you have a lock, press and hold the volume+ and power button till the phone reboots while it has a lock.
3. the phone will reboot back to the directboot-cwm. Reflash your cm9 rom/gapps and clear dalvik/cache.
4. reboot. once it starts, try to get a lock again.
calisro said:
You don't need to fully restore. Do this:
1. Setup multiboot rom. Use EL26 as it still works with the different kernels still. This link:
You basically going to setup the files, flash the directboot-cwm from mobile odin or regular odin. Then when that reboots into cwm, flash the boot_el26.zip file...
2. In the stock temporary rom you just booted, go outside and get a lock. once you have a lock, press and hold the volume+ and power button till the phone reboots while it has a lock.
3. the phone will reboot back to the directboot-cwm. Reflash your cm9 rom/gapps and clear dalvik/cache.
4. reboot. once it starts, try to get a lock again.
Click to expand...
Click to collapse
You, sir, are a god. I wish I could spam that "Thanks" button. Again, you are a lifesaver!
just temp flash to el29 using the emmc fix... get gps lock and then reboot. youll boot back into cwm. re flash your cm zip and you should have gps lock
Hello everyone,
been creeping the forums for the past week...new to the android world but i find the idea of customizing your phone in your own unique way was a good enough reason to leave blackberry after using it for 7years. Anyways....onto my real problem here.
(I appolgize in advance if i mess up the terminology. hopefully you can understand me)
I use a phone on wind mobile (SGH-T999V) and from what i know it's been a safe assumption that if the T999 works then the t999v will most likely work.
I was on AOKP build 5 prior to flashing to the CM M2 ROM...used odin to install CWM_Touch 6.0.1.2.tar then did the steps in
http://forum.xda-developers.com/showthread.php?t=1946701
Edit : I forgot to mention...I can get the screen to go into recovery mode...however, when i press up on the volume key my phone will turn itself off.
and i plugged the phone in again and it decided to be read by my computer.
to install the ROM which worked successfully... however this is where I think i messed up or maybe it has nothing to do with it at all... But my MMS messages did not work so i tried to just play around with some settings and i searched the forums and tried the things that were posted but to no avail. One of the things i did try was to uncheck the privilege unknown applications button and to turn off developers option so USB debugging should be off...or it may have been on...not too sure.
Anyways, so i remembered that I haven't finished the last 2 steps from the "how to flash a rom" in the midst of reinstalling my programs using titanium backup. So i reboot into recovery mode(and this is where i messed up i think) and i wiped my factory data again so after noticing that i did that i went back and restarted the phone and filled in all the information on the welcome screen again. and went back into recovery.
did "wipe cache partition" 3 times AND dalvik cache once then proceeded to install from my sd card the "lk_aosp_jb_tmo-v1.6". After installing i rebooted the device again and i get to see the Samsung Galaxy S3 screen and my screen will go completely black. However, I know it's still on as the battery charging indicator is on and my two buttons around the home button are lit up constantly....out of curiosity i decided to call myself using a land line and the phone is still working (I hope this is good news and that i'm not bricked but teased in a sense i can't fix the screen).
I tried to plug my phone in and it didn't detect it so i reinstalled the drivers and it did detect the phone. I laoded the Samsung Galaxy S3 Toolkit V.2.3.0 in hopes of trying to recover via option 6 "backup and restore your phone" and was hoping to revive it by restoring the nandroid backup however when i typed in my folder the toolkit crashed on me...and now it can't detect my phone as when i try to install the drivers again - the MDA driver seems to fail everytime.
Sorry for the long message...I wanted to be detailed in a sense I don't have to keep giving people more details... your help would be appreciated...Thanks everyone!!
Where'd you get the lk_aosp_jb_tmo_1.6 file from? Never read about it. All you need to do is wipe completely from recovery (data, system, cache...) and install cyanogen and then gapps, reboot.
Sent from my SGH-T999 using xda premium
You can also just odin back to stock and start over from fresh. If you can still get into cwm then just do what he just stated above.
Sent from my SGH-T999 using xda app-developers app
Where'd you get the lk_aosp_jb_tmo_1.6 file from? Never read about it. All you need to do is wipe completely from recovery (data, system, cache...) and install cyanogen and then gapps, reboot.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1845836
It was 1.6 as of yesterday when i downloaded it but it looks like it's 1.7 now. That was my original plan however when i boot into recovery i literally have roughly 1second to pick an option before my screen goes blank again. I tried to boot it a few times into recovery trying to "beat" the blank screen but that hasn't worked.
You can also just odin back to stock and start over from fresh. If you can still get into cwm then just do what he just stated above.
Click to expand...
Click to collapse
Yeah the problem is I can't get back into the cwm as my screen goes blank
I tried to find a link for the stock kernel but the 2-3 that i found all have 404.
Something tells me i just ran into bad luck with the kernel flash. or does it have to do with me doing a wipe/data reset again and perhaps not selecting the debugging options/trusting unknown apps checkbox before running it through again? I'm not sure...just grasping at straws here to why my phone is doing that.
Anyone else have more ideas?? Anything will help...Thanks again!!
Looking like an Odin is your option here. To flash a ROM/kernel, wipe data,system,cache... flash ROM then gapps(optional for which ever ROM you are on) and then kernel. Make sure you're flashing the proper kernel.
Sent from my SGH-T999 using xda premium
mt3g said:
Looking like an Odin is your option here. To flash a ROM/kernel, wipe data,system,cache... flash ROM then gapps(optional for which ever ROM you are on) and then kernel. Make sure you're flashing the proper kernel.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Okay - I'll try it tonight when i get home from work. Here's where my lack of knowledge/noob status comes into play. Thanks for the help.
Do i get into Odin via trying to start my phone in download mode? (I tried to hold the power button/down/home) but that's when i get that glimmer of hope before my screen turns blank again when it asks if i want to continue or reboot my phone.
Or do i try to get it running through Samsung Galaxy S3 Toolkit V.2.3 ?? (If that's the case can you tell me which option i should use to get to the appropriate screen? or should i just launch the odin executable file? (however I'm not sure how that would get anything accomplished if my phone doesn't enter download mode...or maybe it's in download mode when i press up on the volume key but the screen is actually blank? Or maybe i don't understand the process 100%)
But lets say hypothetically speaking I manage to get Odin working. Which proper kernel should i be using? I tried looking for the stock kernel but all the links i found 404'ed. Does anyone have one that works? I'm just kind of trying to get my phone working in general...even if it means going back to stock everything. Pointers Anyone?
Thanks!!
Edit: Forgot to mention the fact that I may not be in debugging mode as i tried to turn that off to see if that had anything to do with my inability to send out MMS msg's as i mentioned in my first post... so that might stop me from using Odin no?
Update
Ok well just an update in case it happens to someone else - I pretty much left the phone alone and didn't touch it for 16hrs. Came home from work and it decided to boot up recovery mode so i just wiped data/cache quicker than a little kid wanting to open Christmas presents on Christmas day when they wake up... Needless to say I didn't bother testing the lk 1.6 kernel so i'm not sure if it works with CM10 running a SGH-T999V (Wind Mobile) phone. I'm trying to think of what may have happened and I'm thinking MAYBE it's because i was charging my phone from 20% all the way to about 95 then decided to plug it into my computer ...so maybe an overheat issue?
Anyways. Thanks for everyone's attempt to help. Much appreciated!
Hey guys,
So I desperately need some help here. I rooted my phone using the ODIN method, which worked fine. I put 2 ROMS on the internal memory in order to see which I liked best. I was only able to install one before my phone started heading downhill.
Basically after installing LiquidSmooth (the "stable" one) my phone started wigging out: not letting me access the external SD card (it didn't even see that I had one, and I popped it to reset it), not letting me even open a web browser, saying I had no connection via 3G (which is strange because it's a 4G phone, and it stated so before I installed LiquidSmooth) and just generally not letting me do anything.
Logically I figured I'd just replace the ROM with another, so I tried to install the "Pac-Man" d2tmo ROM... but LiquidSmooth was the only one starting up, no matter what I did (soft reboot, factory restore from keypad, UP vol + power + home, and even from inside the phone settings.) Nothing worked. I even tried to recover a backup I had made before I installed LiquidSmooth, but the menu just kept saying no data present (which is especially odd, since I even put the backup on my desktop, but I just can't get the phone to run it)
I figured, okay well maybe I'll just have to restore from the vol + pow + home screen. Bigger mistake. Now my phone won't boot at all, and I'm at a loss for words. I've rooted other phones with no issue before (I even had to recode a bit of a "one-click" program to root my ol' Galaxy S Vibrant) and now I just don't know what to do.
Here's what I need to know: If I can recover to factory (and if so, what other ROMs are good... I was mislead by everyone saying LiquidSmooth was great *grrr*), and if not, what exactly are my options to get this thing running at all.
Oh, and I was running Jellybean 4.1.1 and it got bumped to 4.2.2 when I installed LiquidSmooth, if that helps at all.
Thanks so much for any and all help.
OneIdiotInATree said:
Hey guys,
So I desperately need some help here. I rooted my phone using the ODIN method, which worked fine. I put 2 ROMS on the internal memory in order to see which I liked best. I was only able to install one before my phone started heading downhill.
Basically after installing LiquidSmooth (the "stable" one) my phone started wigging out: not letting me access the external SD card (it didn't even see that I had one, and I popped it to reset it), not letting me even open a web browser, saying I had no connection via 3G (which is strange because it's a 4G phone, and it stated so before I installed LiquidSmooth) and just generally not letting me do anything.
Logically I figured I'd just replace the ROM with another, so I tried to install the "Pac-Man" d2tmo ROM... but LiquidSmooth was the only one starting up, no matter what I did (soft reboot, factory restore from keypad, UP vol + power + home, and even from inside the phone settings.) Nothing worked. I even tried to recover a backup I had made before I installed LiquidSmooth, but the menu just kept saying no data present (which is especially odd, since I even put the backup on my desktop, but I just can't get the phone to run it)
I figured, okay well maybe I'll just have to restore from the vol + pow + home screen. Bigger mistake. Now my phone won't boot at all, and I'm at a loss for words. I've rooted other phones with no issue before (I even had to recode a bit of a "one-click" program to root my ol' Galaxy S Vibrant) and now I just don't know what to do.
Here's what I need to know: If I can recover to factory (and if so, what other ROMs are good... I was mislead by everyone saying LiquidSmooth was great *grrr*), and if not, what exactly are my options to get this thing running at all.
Oh, and I was running Jellybean 4.1.1 and it got bumped to 4.2.2 when I installed LiquidSmooth, if that helps at all.
Thanks so much for any and all help.
Click to expand...
Click to collapse
Did you flash the latest recovery? Did you wipe data when flashing to a 4.2.2 aosp ROM from 4.1.1 tw? You'll need to do that before and not dirty flashing. Have you done a battery pull? And then tried to enter recovery?
Sent from my SGH-T999 using xda app-developers app
monkeypaws said:
Did you flash the latest recovery? Did you wipe data when flashing to a 4.2.2 aosp ROM from 4.1.1 tw? You'll need to do that before and not dirty flashing. Have you done a battery pull? And then tried to enter recovery?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
It auto-wiped to upgrade to 4.2.2, so if there is a way to downgrade it to get it to work, I'd love to know. At the moment all I can access is the Clockwork Mod boot list from the vol+pow+home route. Did a battery pull and entered recovery. Still nothing. If I try to boot without going through the vol+pow+home method, it just vibrates and then nothing.
Update recovery.
Wipe everything except sd cards.
Install rom.
Install Gapps.
Factory reset.
Done.
Aerowinder said:
Update recovery.
Wipe everything except sd cards.
Install rom.
Install Gapps.
Factory reset.
Done.
Click to expand...
Click to collapse
I formatted everything from that vol+pow+home menu.
Gapps? Is that something I should install from SD?
Sorry, I'm just a bit overwhelmed by something I thought would be easy...
OneIdiotInATree said:
I formatted everything from that vol+pow+home menu.
Gapps? Is that something I should install from SD?
Sorry, I'm just a bit overwhelmed by something I thought would be easy...
Click to expand...
Click to collapse
Gapps are Google apps that are required to flash after flashing an aosp ROM. They are usually included as a separate download in the first post of the wrong you are downloading. Make sure you download the right gapps. There shod be a setti ng in cwm to turn on USB connection when connected to comp. So you can load the gapps to your SD card. Then re wipe phone through recovery, reflash the rom , the in the same menu reflash gapps. Then reboot. It should then load properly . Otherwise. If you can access download mode, restore stock rom with Odin, reroot and try again from step one.
Sent from my SGH-T999 using xda app-developers app
If you fix your phone try using twrp instead of cwm thats what i had to do and DL the 2013 version of gapps. I have the latest pacman ROM and the only thing i had to do after install was clear data and cache for the rom control via apps-all-rom control. Well hope this helps.
Sent from my SGH-T999 using xda app-developers app
SamsungGui said:
If you fix your phone try using twrp instead of cwm thats what i had to do and DL the 2013 version of gapps. I have the latest pacman ROM and the only thing i had to do after install was clear data and cache for the rom control via apps-all-rom control. Well hope this helps.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Alright, I just installed both LiquidSmooth again followed by GApps, factory reset the phone, and restarted. Now the phone will not start up (even the vibration) or allow a shift into cwm. Why did this happen? Is there a way to reverse this since now I've lost the ability to even access the cwm?
At this point, I just want to restore to the original loadout, but I've been unable to do that too.
By the way, I do appreciate all the advice on this problem. I'm frazzled beyond belief and have a very expensive paperweight currently.
OneIdiotInATree said:
Alright, I just installed both LiquidSmooth again followed by GApps, factory reset the phone, and restarted. Now the phone will not start up (even the vibration) or allow a shift into cwm. Why did this happen? Is there a way to reverse this since now I've lost the ability to even access the cwm?
At this point, I just want to restore to the original loadout, but I've been unable to do that too.
By the way, I do appreciate all the advice on this problem. I'm frazzled beyond belief and have a very expensive paperweight currently.
Click to expand...
Click to collapse
Make sure you have the ROM of choice and compatible Google apps on your SD card.
Now do the following
1. Pull battery out of phone
2. Put battery into phone
3. Boot into recovery (volume +, home button, power button)
4. Wipe cache
5. Wipe dalvik cache
6. Wipe data/factory reset
7. Install ROM
8. Install gapps (Google apps)
9. Wipe cache
10. Wipe dalvik cache
11. Reboot phone
Once booted up and logged into Google account, go to play store, search for goo manager, download goo manager, open goo manager and press the menu button and install the open recovery script....now you'll have twrp (team win recovery project).
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|
707BeastMode707 said:
Make sure you have the ROM of choice and compatible Google apps on your SD card.
Now do the following
1. Pull battery out of phone
2. Put battery into phone
3. Boot into recovery (volume +, home button, power button)
4. Wipe cache
5. Wipe dalvik cache
6. Wipe data/factory reset
7. Install ROM
8. Install gapps (Google apps)
9. Wipe cache
10. Wipe dalvik cache
11. Reboot phone
Once booted up and logged into Google account, go to play store, search for goo manager, download goo manager, open goo manager and press the menu button and install the open recovery script....now you'll have twrp (team win recovery project).
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|
Click to expand...
Click to collapse
I finished most of these steps, but when I rebooted my phone after installing both LiquidSmooth and Gapps, it refused to start. Now I can neither turn it on or go back into recovery mode. The phone is just dead now. What would cause this? I've taken the battery (and everything else for that matter) out again and again, charged it for the last hour, and nothing has changed.
Okay follow this to get to stock and make sure it can at least do that. http://forum.xda-developers.com/showthread.php?t=2136921
Sent from my SGH-T999 using xda app-developers app
OneIdiotInATree said:
I finished most of these steps, but when I rebooted my phone after installing both LiquidSmooth and Gapps, it refused to start. Now I can neither turn it on or go back into recovery mode. The phone is just dead now. What would cause this? I've taken the battery (and everything else for that matter) out again and again, charged it for the last hour, and nothing has changed.
Click to expand...
Click to collapse
Are you sure you have a T-Mobile phone?
monkeypaws said:
Okay follow this to get to stock and make sure it can at least do that. http://forum.xda-developers.com/showthread.php?t=2136921
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the set of instructions, but I am unable to either start it (power button), put it in cwm (pwr+up+home) or download mode as mentioned (pwr+down+home). I don't get a vibration; I don't get anything. Is this totally bricked now? Since the device isn't on, I can't do anything with Odin or the SD card.
What country do you live in, and how did you acquire your phone? Looks like you maybe have the intl version.
I would say try to get into download mode with the physical bottons if that dint work try a jig u can get on ebay like 5 bucks they are always handy.if u can get in to dl mode odin a root66.tar then install recovery.if that dobt worj u prib install liquid rom but fir diff device abd hard brixk u f that case hope u have insurance ti replace they will never know u rooted ir have it jtaged
Its bricked, jtag repair only way .
Stop flashing in my opinion theres a huge issue with the t999 rom compatility and someone mentioned of tw roms being labeled as aosp.roms,I would root but stay away from flashing.until someone figures this out .Theres way to many brick topics lately i find to be oddly connected to the same causes .
Some will say bs but trust me theres something going on..even the most experienced flashers are bricking the t999 its to me the most easiest brickable device i ever delt with.
lojak29 said:
Its bricked, jtag repair only way .
Stop flashing in my opinion theres a huge issue with the t999 rom compatility and someone mentioned of tw roms being labeled as aosp.roms,I would root but stay away from flashing.until someone figures this out .Theres way to many brick topics lately i find to be oddly connected to the same causes .
Some will say bs but trust me theres something going on..even the most experienced flashers are bricking the t999 its to me the most easiest brickable device i ever delt with.
Click to expand...
Click to collapse
it honestly sounds like he has he international version not the US variant. so i think thats the mistake not the phone
lojak29 said:
Its bricked, jtag repair only way .
Stop flashing in my opinion theres a huge issue with the t999 rom compatility and someone mentioned of tw roms being labeled as aosp.roms,I would root but stay away from flashing.until someone figures this out .Theres way to many brick topics lately i find to be oddly connected to the same causes .
Some will say bs but trust me theres something going on..even the most experienced flashers are bricking the t999 its to me the most easiest brickable device i ever delt with.
Click to expand...
Click to collapse
99% of the bricking is user error...the reason for the increase in "bricked" topics is cause by the amount of users of the T999...its the most heavily used phone by a wide margin now.
Ive far from an expert but have been flashing since the G1 days and have experience with many phones...in my opinion the t999 is darn near unbrickable unless you didnt follow the directions or use a reputable developer when selecting a rom...
To the OP:
What is the actual model of your phone ? you came with an issue and have not really posted much about the specifics of your phone...
sounds like your phone is not partitioned correctly which probably happened by not following the correct directions
there is so much more info needed to diagnose your issue its silly...
Ive been using wicked roms from day one on the t999 and I dont remember seeing anyone hardbrick a phone yet and there are thousands of users using wicked roms...
---------- Post added at 10:58 AM ---------- Previous post was at 10:16 AM ----------
Also...was your phone charged when you last tried to flash something? long ago my phone died while flashing ( lessoned learned) ...
pull the battery for awhile...put it back in and try to charge it...
then try to odin back to stock after its charged...
Even if AOSP and TW ROMs were labelled wrong... what difference would it make ? Sure, it could be misleading and all but it's hardly going to brick a phone just give you something you might not have exactly wanted (if that's even actually happening).
I also wonder if this phone is actually an International version instead of the T-Mobile one.
OP, it looks like you need JTAG repair now. If you don't honestly know what exact model you have talk to the JTAG repair service people about it - since they can most likely JTAG either they can just tell you which phone you have once they've fixed it.
Pennycake said:
Even if AOSP and TW ROMs were labelled wrong... what difference would it make ? Sure, it could be misleading and all but it's hardly going to brick a phone just give you something you might not have exactly wanted (if that's even actually happening).
I also wonder if this phone is actually an International version instead of the T-Mobile one.
OP, it looks like you need JTAG repair now. If you don't honestly know what exact model you have talk to the JTAG repair service people about it - since they can most likely JTAG either they can just tell you which phone you have once they've fixed it.
Click to expand...
Click to collapse
OP just has to remove the battery cover and battery and bam! There's a label with Sammy's logo along with device model and other info about the phone.
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|
Hi
Guys i need your help. Pleas can someone tell me for now what mods is much better for I927R (Also withe very stability and with much less bugs) ?!
I found Liquid Smooth but it have some problem so i need your guide about other mods.
Thank you
ICS Roms are the best and most stable... Stock ICS from AT&T UCLJ3 or any roms based off of it ... Dman's daily driver, Ice Pop Rom by RawRaw, LiteRom by TheGreaterGood...
Unfortunately none of those are being maintained but I had been running Dman's for the last couple months, great battery life when paired w/ JuiceDefender (20+hours of heavy use when I'm not sleeping).
Now the newest CM10.1 by Spyke seems pretty solid ... Just a couple of issues.
ICS is the only one you'll get bug free, though. Stock is hard to compete with when we're pairing up roms without a true Devdeloper.
On this subject, I've just reverted back to using IcePop ROM after (unhappily) downgrading from Spyke's latest 10.1 ROM - just mainly because of the Bluetooth headset issue, which I really need working for work purposes.
I'm just wondering if there are any ICS builds that have GPS working correctly? I tried flashing the Rogers modem (since my phone was originally a Rogers import, flashed to AT&T ICS, then played with ICS from there) and first time I ran GPS status it took 771 seconds... I'm going to keep trying just in case that was the first time only, but 12 minutes is still a very long time for an initial fix .
Also - I've found that I'm getting more and more bootloop problems even with clean installs - so wiping cache, data, dalvic, etc. Is there some way to do a *thorough* wipe without bricking the phone? I can back all my data up no worries, but next time I move to JB (in the optimism that the BT issues will be fixed soon, judging by the positive progress being made by Spyke ) I would like to do a clean build from scratch and not have to gamble being able to start the phone up again
David - I always go into mount options of CWM and format /system prior to a new flash .. I'm not sure if flashing with Odin will get rid of any previous settings, its something to attempt though.
I, also, had reverted to using JB Because GPS wouldn't work ... There's a thread in here (search for it) that shows the solution to the GPS fix, its editing sirgps.conf and gps.conf ... I was getting a fix on GPS in under 30 seconds.... GPS was a huge let down in the stock ICS rom, Even when using TheGreaterGoods LiteRom w/ GPS fix I found after a couple of days my gps didn't hold....
Thanks for the reply.
I was considering formatting /system this morning when I was getting stuck in a boot loop from trying to get M3 running, but decided it was a risk I'd have to check up on first . Next time I do a build from scratch (I'm going to resist until the BT stuff is working - fingers crossed!) I'll do that.
I remember having a look at the gps.conf fix but don't recall anything about sirgps.conf - so I will look it up, thanks!
As an aside, I've been checking the GPS fix a couple of times since my last post and it is coming up in under 30 seconds each time... I'm wondering if my attempt to flash the Rogers modem did in fact fix the issue... I'd do a reboot but I'm too scared I won't get the phone up again XD
EDIT:
Found the fix, I did a few of the changes (rather than all of them), and it's now picking up 8 satellites instead of 3-5, and getting a stronger signal from each... and all I did was point it to the AU ntp server, and tell it I'm not on the ATT network . I'll save the suggested settings to a text file on my SD card so next time I'm out and about and if it plays up I'll have access to the details.
yohan4ws said:
David - I always go into mount options of CWM and format /system prior to a new flash .. I'm not sure if flashing with Odin will get rid of any previous settings, its something to attempt though.
Click to expand...
Click to collapse
Had to restart my phone tonight and got caught in a boot loop again... after trying a few things I flashed Lite Kernel (I'm still using ICS again at the moment) and that seems to have solved the boot loop issues. I'm thinking that with all the ROM flashing I've been doing the fact that I actually had the phone running without flashing an ICS specific kernel (after running JB) was screwing things up.
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
davidpartay said:
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
Click to expand...
Click to collapse
That has to be very concerning to you, I've never had an issue booting any ROM. And very strange flashing the Kernel separately would resolve your booting issues...
Did you try to flash any of the stock roms w/ Odin ? I have read that we can only flash back to stock Gingerbread from JellyBean if we flash a GB or ICS CWM ROM and then go back with Odin otherwise there will be boot issues.
If I were in your position I would try and do a full revert back to the earliest version of gingerbread I could find on samfirmware and then use Kies to udpate - THEN I would retry flashing to a newer JB or ICS Rom.
Pretty time consuming but that is the price we pay to mod
davidpartay said:
Had to restart my phone tonight and got caught in a boot loop again... after trying a few things I flashed Lite Kernel (I'm still using ICS again at the moment) and that seems to have solved the boot loop issues. I'm thinking that with all the ROM flashing I've been doing the fact that I actually had the phone running without flashing an ICS specific kernel (after running JB) was screwing things up.
Interestingly though, I tried installing Spyke's M3 ROM from a complete user wipe, system format, everything gone - and I still got a boot loop so next time I try it I'll grab a copy of LiteKernel and do that separately.
Click to expand...
Click to collapse
My phone has an issue, simple I couldnt reboot it, I must power off and wait a little. You can try it when you flash something, just remove battery and usb cable, and wait 2 minutes, before you turn on.
yohan4ws said:
Did you try to flash any of the stock roms w/ Odin ? I have read that we can only flash back to stock Gingerbread from JellyBean if we flash a GB or ICS CWM ROM and then go back with Odin otherwise there will be boot issues.
Click to expand...
Click to collapse
Not yet. I'll have to check which ones I have - I'm certain I have the AT&T ICS rom from November but then I'd have to go digging through my email for the unlock code again, so I'm trying to avoid doing that at this point . If i can find the stock GB Rogers rom at some point I might flash that one back on before I do any more upgrades. The phone is up and running at this point though, so I'm not too fussed. I've also noticed that it's a little quicker than before so I think the version of LiteKernel I installed was a good idea anyway.
bubor said:
My phone has an issue, simple I couldnt reboot it, I must power off and wait a little. You can try it when you flash something, just remove battery and usb cable, and wait 2 minutes, before you turn on.
Click to expand...
Click to collapse
I've tried pulling the battery a few times, but probably no longer than 30 seconds. Next time I'll give it a couple of minutes. I tend to do this late at night when I'm not expecting any calls (except fire brigade but I have a pager for that too) so time without a phone is no issue to me
Yesssss
After much irritation at continually getting stuck in boot loops again, I've 'Oneclicked' the phone twice, got fed up with the AT&T ICS ROM within about 5 minutes, gave up on IcePop because of buggy GAPPS...
And thought, bugger it. Format /system. Factory reset. Clear cache + Dalvik. Installed in this order:
Jellybean 4.2 ROM from 0217
Spyke's M3 update
PAC rom
GAPPS dated 0427
"Kick-ass Kernel"
and it BOOTED FIRST GO
I am pleased
Does JB need already to be installed before putting the M3 revisions on? Maybe that's where I've been going wrong all along, because my attempts at running both the standard M3 and PAC ROM (even immediately after OneClicking) resulted in boot loops or eternal boot loading.
Uhh... what do you mean by "One Clicking" ??
I know there's a "superoneclick" that will flash and root the rom all at once, but I never personally found it to work for our glides.
Using CWM and installing the ROM through the CWM boot menu is severaly key presses so ... not too sure what you're referring to.
Also, I've always downloaded to a hardwired computer then copied over USB to my phone and flashed ... sometimes the download will have errors if I grab it from my phone.
I'm assuming it's a variant of SuperOneClick... The title is 'Odin3Excution v1.85' and then underneath it says 'I927UCLG9_OneClick'.
And it worked just fine, I did have a stock rom that I tried to flash with Odin but it kept giving me errors, the OneClick method worked.
davidpartay said:
I'm assuming it's a variant of SuperOneClick... The title is 'Odin3Excution v1.85' and then underneath it says 'I927UCLG9_OneClick'.
And it worked just fine, I did have a stock rom that I tried to flash with Odin but it kept giving me errors, the OneClick method worked.
Click to expand...
Click to collapse
Interesting... for future reference, www.samfirmware.com has the stock firmwares, then there's the superUser file floating around the forums that allows you to root by flashing it. Passed that, remove bloat.
Glad you got it working! Welcome to JB