Develop Bugs

OTA with unlocked bootloader

hi everyone, i have an E6833 running on 32.4.A.0.160
i received my phone today it was at maintenance service, so i came back and installed twrp on it (no root)
after restarting i got an update message 32.4.A.1.54 from system
the quistion is: can i install this update with an unlocked bootloader and custom recovery installed?
if no can i uninstall the twrp and install the update?+(how?)
if no again, what should i do?
thx

your best bet is to make a full backup.
Move the backup to your pc.
Download the update using Flashtool 0.9.23.2
install firmware after downloading ( exclude all .TA files in the lower window)
If you are going from stock rom to this update its possible to flash without wiping user data to keep your apps / data intact.
Fast boot a Recovery like TWRP
then reboot to recovery and flash a custom kernel. like PDesires YandereCore.
reboot and enjoy.
This is basically what I did for the current update on my E6853
Hit thanks if I've helped you.

Patrick Morgan said:
your best bet is to make a full backup.
Move the backup to your pc.
Download the update using Flashtool 0.9.23.2
install firmware after downloading ( exclude all .TA files in the lower window)
If you are going from stock rom to this update its possible to flash without wiping user data to keep your apps / data intact.
Fast boot a Recovery like TWRP
then reboot to recovery and flash a custom kernel. like PDesires YandereCore.
reboot and enjoy.
This is basically what I did for the current update on my E6853
Hit thanks if I've helped you.
Click to expand...
Click to collapse
thank you very much dude really appreciate it, the problem is that i downloaded the firmware from xperiafirm and when i went to falshtool to convert them with Filset, flashtool doesn't detect anything from the downloaded file, i have flashtool installed with all the drivers and updated,

b7GaMer said:
thank you very much dude really appreciate it, the problem is that i downloaded the firmware from xperiafirm and when i went to falshtool to convert them with Filset, flashtool doesn't detect anything from the downloaded file, i have flashtool installed with all the drivers and updated,
Click to expand...
Click to collapse
its possible flash tool is not set to look in the correct folder.
Make sure you select Flash (not fastboot)
then make sure the location is C:\Users\*your profile name*\.flashTool\firmwares
after Flashtool downloads a firmware it auto extracts the firmware files.
so you only need to select the device (after its been set to Flash mode (Flash tool will direct you)
use the arrows next device tree, and go to the bottom arrow til you get your firmware.
I've made note of the Exclude TA files to tick all of these. to remove the TA files from your flash.
Make sure too. that you are using a USB 2 port. USB 3 ports have been giving errors with the current drivers on some systems
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Patrick Morgan said:
its possible flash tool is not set to look in the correct folder.
Make sure you select Flash (not fastboot)
then make sure the location is C:\Users\*your profile name*\.flashTool\firmwares
after Flashtool downloads a firmware it auto extracts the firmware files.
so you only need to select the device (after its been set to Flash mode (Flash tool will direct you)
use the arrows next device tree, and go to the bottom arrow til you get your firmware.
I've made note of the Exclude TA files to tick all of these. to remove the TA files from your flash.
Make sure too. that you are using a USB 2 port. USB 3 ports have been giving errors with the current drivers on some systems
Click to expand...
Click to collapse
i think the installing directories are fine, but i'll check them back again, thx again ♡

LG G4 Stuck in fastboot mode

Please i have been having a problem with my lg g4 i tried flashing a rom and i mistakenly hit the phone and it disconnected while still in the process of flashing and now when i try to boot my phone it goes to fastboot mode, i cant access download mode or recovery no matter what i do it goes to fastboot mode so i read on xda that you can flash the laf partition and you would be able to get in download mode so you can flash the stock rom but when i try to flash the partition laf in fastboot "fastboot flash laf laf.bin" i keep getting error s
erasing 'laf'...
FAILED (remote: cannot erase this partition in unlocked state)
finished. total time: 0.024s
and when i lock the bootloader in fastboot mode and try again i still get an error
erasing 'laf'...
FAILED (remote: device is locked. Cannot erase)
finished. total time: 0.023s
please what do i do? i really need your help sir

Mortal Killer said:
Please i have been having a problem with my lg g4 i tried flashing a rom and i mistakenly hit the phone and it disconnected while still in the process of flashing and now when i try to boot my phone it goes to fastboot mode, i cant access download mode or recovery no matter what i do it goes to fastboot mode so i read on xda that you can flash the laf partition and you would be able to get in download mode so you can flash the stock rom but when i try to flash the partition laf in fastboot "fastboot flash laf laf.bin" i keep getting error s
erasing 'laf'...
FAILED (remote: cannot erase this partition in unlocked state)
finished. total time: 0.024s
and when i lock the bootloader in fastboot mode and try again i still get an error
erasing 'laf'...
FAILED (remote: device is locked. Cannot erase)
finished. total time: 0.023s
please what do i do? i really need your help sir
Click to expand...
Click to collapse
unlock your device again I guess you have the T-Mobile version h811? After you have unlocked again try to flash the boot and system partitions while in fastboot.
for is this you need to extract a kdz file with SALT first. check my signature for a link
Sent from my LG-H815 using XDA Labs

Please dont make multiple posts and thread for the same query.
You can always approach some members / seniors through Private Messaging
Kindly take note.

SREEPRAJAY said:
Please dont make multiple posts and thread for the same query.
You can always approach some members / seniors through Private Messaging
Kindly take note.
Click to expand...
Click to collapse
im sorry i do not know how things work here yet. i posted it once i didn't know it went through so i posted it again my bad. how do i delete one?

steadfasterX said:
unlock your device again I guess you have the T-Mobile version h811? After you have unlocked again try to flash the boot and system partitions while in fastboot.
for is this you need to extract a kdz file with SALT first. check my signature for a link
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
no i am using the LG-H815. i extracted the kdz but i have multiple System.bin files and when i merge it and then try to flash it i get the error "invalid sparse file format at header magi"

Mortal Killer said:
no i am using the LG-H815. i extracted the kdz but i have multiple System.bin files and when i merge it and then try to flash it i get the error "invalid sparse file format at header magi"
Click to expand...
Click to collapse
so i was finally able to flash the system file and boot file but the phone is still going into fastboot mode when i try to power it on same thing if i try to get in download mode. and when i try to flash the laf.bin file i get an error "FAILED (remote: cannot flash this partition in unlocked state)" please what do i do?

Mortal Killer said:
so i was finally able to flash the system file and boot file but the phone is still going into fastboot mode when i try to power it on same thing if i try to get in download mode. and when i try to flash the laf.bin file i get an error "FAILED (remote: cannot flash this partition in unlocked state)" please what do i do?
Click to expand...
Click to collapse
you can't Flash several partitions once you have upgraded to Nougat .
You haven't followed my recommendation to use SALT for extracting KDZ file that's why you have multiple system image files.
It's your decision if you follow recommendations or not but I'm out now
Sent from my LG-H815 using XDA Labs

steadfasterX said:
you can't Flash several partitions once you have upgraded to Nougat .
You haven't followed my recommendation to use SALT for extracting KDZ file that's why you have multiple system image files.
It's your decision if you follow recommendations or not but I'm out now
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
your program SALT cannot extract TOT files. the android 7 i was on was a custom rom so wasn't a kdz file its a TOT file

Mortal Killer said:
your program SALT cannot extract TOT files. the android 7 i was on was a custom rom so wasn't a kdz file its a TOT file
Click to expand...
Click to collapse
YOU MUST USE SALT!!!
Any other programm isn´t working. Cause every file generated from SALT ist fastboot flashable....
Then Search for a KDZ File for your Model and extract this. For bOOT partition it is not needed to take a N file.
System partition i do not know either.
Try again...and use SALT. otherwise nobody can help you without losing your data

uweork said:
YOU MUST USE SALT!!!
Any other programm isn´t working. Cause every file generated from SALT ist fastboot flashable....
Then Search for a KDZ File for your Model and extract this. For bOOT partition it is not needed to take a N file.
System partition i do not know either.
Try again...and use SALT. otherwise nobody can help you without losing your data
Click to expand...
Click to collapse
thanks losing my data is not a problem i am willing to lose it if i can just get the phone working again. and i have flashed the boot partition just now i downloaded a kdz and extracted the boot partition like you said. but the phone is still stuck in fastboot mode

Mortal Killer said:
thanks losing my data is not a problem i am willing to lose it if i can just get the phone working again. and i have flashed the boot partition just now i downloaded a kdz and extracted the boot partition like you said. but the phone is still stuck in fastboot mode
Click to expand...
Click to collapse
when you start your Phone this is the way it goes:
Bootloaderstack (MM or N?) -> aboot (fastboot) -> boot (kernel + ramdisk) -> system (ROM)
Which Kdz have u used? MM,LP or N?
in Fastboot you could Flash TWRP in Recovery partition. If ypur Boot partition is fixed u could get to TWRP and set up an new ROM.

uweork said:
when you start your Phone this is the way it goes:
Bootloaderstack (MM or N?) -> aboot (fastboot) -> boot (kernel + ramdisk) -> system (ROM)
Which Kdz have u used? MM,LP or N?
in Fastboot you could Flash TWRP in Recovery partition. If ypur Boot partition is fixed u could get to TWRP and set up an new ROM.
Click to expand...
Click to collapse
I USED MM KDZ but I also have LP

Mortal Killer said:
I USED MM KDZ but I also have LP
Click to expand...
Click to collapse
TWRP image flashed?

uweork said:
TWRP image flashed?
Click to expand...
Click to collapse
yes i do but my phone cant go into recovery if i try it goes to bootloader. its like i dont have download mode or recovery mode on my phone just fastboot mode

Mortal Killer said:
I USED MM KDZ but I also have LP
Click to expand...
Click to collapse
Try Nougat, maybe you can overwrite the others...

RuedasLocas said:
Try Nougat, maybe you can overwrite the others...
Click to expand...
Click to collapse
its not working

Mortal Killer said:
its not working
Click to expand...
Click to collapse
Your bootloaderstack is N so you must fastboot bootloaderstack MM and Boot partition. Then recovery (TWRP) and it should go into twrp.

uweork said:
Your bootloaderstack is N so you must fastboot bootloaderstack MM and Boot partition. Then recovery (TWRP) and it should go into twrp.
Click to expand...
Click to collapse
am sorry please how to i do that? how do i fastboot bootloaderstack MM and Boot Partition?

Read point 20a in FAQ carefully.
And only fastboot if you understoud everthing
https://forum.xda-developers.com/g4/general/unlock-unlock-lg-g4-device-usu-t3760451

1479/5000
Good night. Although very nervous, I will try to summarize as much as possible.
I do not understand English, I'm using a translator;
About 2 weeks ago, I bought an LG-H815P (used - came in the box, with the same IMEI number and voucher) Stockrom with root, as I could not upgrade because of root, I decided to install a modified rom. Then my problems started: the device had the message [secure boot error / error code: 1002]. So I decided to install a new stockrom, I downloaded the LG site, tried it first with [LGMobile Support Tool], it did not work I did with [LG Bridge] as the program itself sent. By an unfortunate distraction I believe I have installed the wrong version Stockrom. My device simply erased, did not give a sign of life. After following some tutorials on the internet I was able to recover it with [QFIL], I installed all the drives of the tutorial I followed, at the end of the process instead of going into download mode, it enters [fastboot mode] and does not leave it. I tried several times the procedure [volume up + plug the USB] for a second the image download mode appears, but soon it goes to screen [fastboot mode] and does not leave it, never. I read something about the SALT of steadfasterX (I think because of the tiredness and insistence I could not understand) I do not know if SALT is a program or a procedure, the language also disturbs me. I'll try to post the image that appears on the phone so they understand. I apologize for the long text. And from now on thanks to the will. Please help me, I need the device working, I'm very tired of moving all these days without stopping in it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 07:02 AM ---------- Previous post was at 06:51 AM ----------
https://drive.google.com/open?id=1aJxRCwfxrhrAlmC9Qmz1EYIaFSGc2H5e
https://drive.google.com/open?id=1bmk0BfBLbF2ufQEkhh4RnzEFXB6LJN88

How To Guide Nokia G20 boot.img flashing!

Please be aware that this could damage your phone & I'm not responsible for this. So only do this if you really feel comfortable with it & you know about the risks!
This file is only for Nokia G20 TA-1365 and should not be used for any other device.
Download this file to manually Flash partition or partitions using fastboot Command.
For more detailed tutotial on how to flash this file you can read this tutorial here by senior member fipsib at XDA!
Let's say you want to flash boot.img partition so in CMD you will enter.
"fastboot flash boot boot.img" without quotes.
I have extracted OTA stock rom for my Nokia G20 and have all the files in the screenshot below. If you want all the files shown in the screenshot below I have uploaded them to Google Drive for faster and safer downloads rather than using any other file sharing service.
I have compressed all the files in a zip format and here is the Google Drive link for all the files shown below. Please request the access to the file so that I can grant access to you. I have done this to prevent Google setting an limit to download and avoid any unnecessary downloads.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Do you have to unlock bootloader to flash boot.img if you have to can you tell how????

Don't know said:
Do you have to unlock bootloader to flash boot.img if you have to can you tell how????
Click to expand...
Click to collapse
Thankyou buddy but actually this post is a guide.

mvikrant97 said:
Please be aware that this could damage your phone & I'm not responsible for this. So only do this if you really feel comfortable with it & you know about the risks!
This file is only for Nokia G20 TA-1365 and should not be used for any other device.
Download this file to manually Flash partition or partitions using fastboot Command.
For more detailed tutotial on how to flash this file you can read this tutorial here by senior member fipsib at XDA!
Let's say you want to flash boot.img partition so in CMD you will enter.
"fastboot flash boot boot.img" without quotes.
I have extracted OTA stock rom for my Nokia G20 and have all the files in the screenshot below. If you want all the files shown in the screenshot below I have uploaded them to Google Drive for faster and safer downloads rather than using any other file sharing service.
I have compressed all the files in a zip format and here is the Google Drive link for all the files shown below. Please request the access to the file so that I can grant access to you. I have done this to prevent Google setting an limit to download and avoid any unnecessary downloads.
View attachment 5450449
Click to expand...
Click to collapse
Please share download link.I need to unbrick my Nokia G20 that was bricked.I have no firmware

Download this OTA ROM and flash using Apply update from SD CARD in recovery menu.
Use external SD card.
I don't know whether this will work.
ROM link

Don't know said:
Do you have to unlock bootloader to flash boot.img if you have to can you tell how????
Click to expand...
Click to collapse
Yes need to unlock bootloader.

mvikrant97 said:
Download this OTA ROM and flash using Apply update from SD CARD in recovery menu.
Use external SD card.
I don't know whether this will work.
ROM link
Click to expand...
Click to collapse
Hi thanks for the link. But my phone is bricked, can't enter recovery or fastboot mode. So the only solution here is a read firmware or scatter file.

mvikrant97 said:
Please be aware that this could damage your phone & I'm not responsible for this. So only do this if you really feel comfortable with it & you know about the risks!
This file is only for Nokia G20 TA-1365 and should not be used for any other device.
Download this file to manually Flash partition or partitions using fastboot Command.
For more detailed tutotial on how to flash this file you can read this tutorial here by senior member fipsib at XDA!
Let's say you want to flash boot.img partition so in CMD you will enter.
"fastboot flash boot boot.img" without quotes.
I have extracted OTA stock rom for my Nokia G20 and have all the files in the screenshot below. If you want all the files shown in the screenshot below I have uploaded them to Google Drive for faster and safer downloads rather than using any other file sharing service.
I have compressed all the files in a zip format and here is the Google Drive link for all the files shown below. Please request the access to the file so that I can grant access to you. I have done this to prevent Google setting an limit to download and avoid any unnecessary downloads.
View attachment 5450449
Click to expand...
Click to collapse
Kindly grant access to [email protected] need to unbrick my device

I would like to ask how do I extract the boot.img file from the phone? I can access the internals through the adb shell. I would love to learn the strategies used to extract the firmware from android devices that do not make them available. Thanks!!

karangejo said:
I would like to ask how do I extract the boot.img file from the phone? I can access the internals through the adb shell. I would love to learn the strategies used to extract the firmware from android devices that do not make them available. Thanks!!
Click to expand...
Click to collapse
Simply... You can't without root.
To get root (permanent root) you must unlock your bootloader........
Please, read this post to understand what i'm talking about https://forum.xda-developers.com/t/nokia-g21-development.4424031/
I think that today there's no way to unlock G10/G20/G21 bootloader. Then, no root or custom recovery can be build.
Maybe, @mvikrant97 can share with us some info (PM).

I unlocked my g20 TA-1343 by taking a hundred tiny screws out , shorting the test point, and using MTK Client 1.6
hyperlink of the link i pastedhttps://github.com/bkerler/mtkclient
I only took it apart because the other option was send it back to HMD
But I don't know how to flash the bin files with magisk or whatever as they're not valid images. but the thing is basically root if i felt like learning.

jdberkzk said:
I unlocked my g20 TA-1343 by taking a hundred tiny screws out , shorting the test point, and using MTK Client 1.6
hyperlink of the link i pastedhttps://github.com/bkerler/mtkclient
I only took it apart because the other option was send it back to HMD
But I don't know how to flash the bin files with magisk or whatever as they're not valid images. but the thing is basically root if i felt like learning.
Click to expand...
Click to collapse
Do you mean the bootloader unlock?

mvikrant97 said:
Do you mean the bootloader unlock?
Click to expand...
Click to collapse
Yes I unlocked the bootloader with mtk client but i have the G20 ta-1343 and. I didn't have a stom rom for it.. and I bricked it trying to root it and corrupt the gpt it looks like, now I cant get it to load in mtk client anymore. I haven't errased the rest of the phone but it is in a/b format so i dont know if i should flash it? I was stuck in boot loop

jdberkzk said:
Yes I unlocked the bootloader with mtk client but i have the G20 ta-1343 and. I didn't have a stom rom for it.. and I bricked it trying to root it and corrupt the gpt it looks like, now I cant get it to load in mtk client anymore. I haven't errased the rest of the phone but it is in a/b format so i dont know if i should flash it? I was stuck in boot loop
Click to expand...
Click to collapse
mvikrant97 said:
Do you mean the bootloader unlock?
Click to expand...
Click to collapse
I got bootloader unlocked but when i flashed magisk i got stuck on the android one screen and then now it's back to the no OS boot loop and
Error on reading data: MMC error (0xc0040030)
in mtkclient. i cant get to fastboot anymore.

I du
mvikrant97 said:
Do you mean the bootloader unlock
Click to expand...
Click to collapse
I dumped everything from my phone to my computer except userdata super otp and flashinfo i think.
the bins would flash the same as images except I can't get them to flash. should I try another firmware or?

Question HELP - Realmeflash.exe "cannot find central directory"

Hello everyone !
I am French and my English is very bad so I will use Google translation to communicate with you!
This is what is happening.
Without doing it on purpose, I flashed the original boot with the unofficial TWRP one!
Since then, I can no longer use my phone and I no longer enter the RUI3 interface.
I used Realmeflash.exe to reinstall the firmware and it gives me an error message "cannot find central directory".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you know how to solve this problem?
Thank you for your help !

I had the same problem you gotta get the MCT OFP extractor tool and QFIL, you extract everything with the MCT tool and then use QFIL to flash but the super.img is broken up into multiple files which I Have no clue how to merge so I'm stuck for now but if I get it working I'll be sure to tell you

kamubendi said:
I had the same problem you gotta get the MCT OFP extractor tool and QFIL, you extract everything with the MCT tool and then use QFIL to flash but the super.img is broken up into multiple files which I Have no clue how to merge so I'm stuck for now but if I get it working I'll be sure to tell you
Click to expand...
Click to collapse
Thank you very much friend

@kamubendi
I posted the problem on this page too !
https://c.realme.com/in/post-details/1525231625514856448
If it can help for the future

I share the extraction of the firmware : RMX3363GDPR_12_C.06_2022042721590000
https://drive.google.com/drive/folders/1QpeyOBuavwC3gq25jfKnNaXqmVBMAwt-?usp=sharing

use this flash tool. put the ofp file in same folder run exe & select region start flash https://github.com/italorecife/OppoRealme-OFP-Flash

urstrulynaveen said:
use this flash tool. put the ofp file in same folder run exe & select region start flash https://github.com/italorecife/OppoRealme-OFP-Flash
Click to expand...
Click to collapse
I already tried !
According to Google the .exe is infected with a virus, but I used it anyway, because I know it can be a false positive.
During use, the flash does a lot of "Success" but also "Failed", because of data protection on certain files!
Arrived at "service.img", the flash stops and nothing advances!

I recently unbricked my GT ME using this flash tool only. Realme flash tool doesn't support AB partition & dynamic partition table. It is the only working tool to flash through fastboot. After flashing completion change slot
fastboot getvar current-slot
fastboot --set-active=a or b
fastboot reboot

urstrulynaveen said:
I recently unbricked my GT ME using this flash tool only. Realme flash tool doesn't support AB partition & dynamic partition table. It is the only working tool to flash through fastboot. After flashing completion change slot
fastboot getvar current-slot
fastboot --set-active=a or b
fastboot reboot
Click to expand...
Click to collapse
I choose slot A to do the flashing and then I have to activate slot B ?

Yup after flashing success

urstrulynaveen said:
Yup after flashing success
Click to expand...
Click to collapse
Hi, I got my phone back from this scam repairman!
He damaged my phone even more than I left him!
Could you send me a screenshot of your c:\adb\dir please!
I no longer have recovery mode and the repairman told me a lot of things that I supposedly did during the flashing to get rid of his bull****!!
Thank you.

@urstrulynaveen Otherwise I tried what you told me and I got this!

ToutanVrac said:
@urstrulynaveen Otherwise I tried what you told me and I got this!
View attachment 5618219
Click to expand...
Click to collapse
Ur already in slot a change it to b. Firmware may flashed in slot b

urstrulynaveen said:
Ur already in slot a change it to b. Firmware may flashed in slot b
Click to expand...
Click to collapse
I already did, I have this command line that appears instead !
When I launch the program for slot A, it's very random when it blocks !
On the image, it's xb1_config_a which bug !
And when I close the window, it gives me success before it disappears !
In general, I have 50% success and 50% failed !
The furthest file that gave me the bug is the "super" file !
Apparently it is cut into 5 parts with the OFP extractor.

ToutanVrac said:
I already did, I have this command line that appears instead !
View attachment 5618873
When I launch the program for slot A, it's very random when it blocks !
On the image, it's xb1_config_a which bug !
And when I close the window, it gives me success before it disappears !
View attachment 5618879
In general, I have 50% success and 50% failed !
The furthest file that gave me the bug is the "super" file !
Apparently it is cut into 5 parts with the OFP extractor.
Click to expand...
Click to collapse
Every partition flashes in both slots except super partition. Super partition only flashes in inactive slot, that's why u need to change the slot. Super partition flashing takes around 25 to 30 minutes you need to be patient. & After flashing check slot and change it

urstrulynaveen
Thank you very much for helping me, it motivates me not to give up !
Did you receive a lot of failed during flashing ?

@urstrulynaveen
Problem solved...everything works! !
I'm in the interface and everything seems fine at the moment.
The flashing problem was what you said for the "super" file, but the main problem was above all the fact that I wasn't using a USB port on the motherboard !
Were you able to root the phone ?

ToutanVrac said:
@urstrulynaveen
Problem solved...everything works! !
I'm in the interface and everything seems fine at the moment.
The flashing problem was what you said for the "super" file, but the main problem was above all the fact that I wasn't using a USB port on the motherboard !
Were you able to root the phone ?
Click to expand...
Click to collapse
Can you explain to me how to do it with pictures and writing and I will be very thankful to you

nighetspy said:
Can you explain to me how to do it with pictures and writing and I will be very thankful to you
Click to expand...
Click to collapse
It's very easy !
1. You download the latest firmware
2. You put your phone in fastboot mode
3. You connect your phone with the original cable to an available port on your motherboard
4. You open the "OppoRealme-OFP-Flash_1.0.exe"
5. You choose the "most logical" options
The files will install one by one and you may get a lot of errors!
Leave it, the program will continue and at some point there will be a "super" file which will take a long time to install (30 minutes), you wait and then you will see your phone restart as if it were brand new !

ToutanVrac said:
It's very easy !
1. You download the latest firmware
2. You put your phone in fastboot mode
3. You connect your phone with the original cable to an available port on your motherboard
4. You open the "OppoRealme-OFP-Flash_1.0.exe"
5. You choose the "most logical" options
The files will install one by one and you may get a lot of errors!
Leave it, the program will continue and at some point there will be a "super" file which will take a long time to install (30 minutes), you wait and then you will see your phone restart as if it were brand new !
Click to expand...
Click to collapse
Finally, after two weeks of trouble, the problem was solved, thank you very much

Question root Xiaomi 11T Official ??

I want an official way to root the device and change the official ROM

strayh_ said:
I want an official way to root the device and change the official ROM
Click to expand...
Click to collapse
Welcome to XDA,
I want the same!
Maybe some dev around!

Root is available: Follow this thread
Unofficial twrp 3.6.0 for Xiaomi 11T (Agate)
Twrp 3.6.0 Root Xiaomi 11T (Agate): unofficial build of twrp 3.6.0 have Now been available for the Xiaomi 11T user Who own Xiaomi 11T can Root it by following the below Instructions. to Install twrp Recovery on Xiaomi 11T first You need to...
forum.xda-developers.com

Kiwironic said:
Root is available: Follow this thread
Unofficial twrp 3.6.0 for Xiaomi 11T (Agate)
Twrp 3.6.0 Root Xiaomi 11T (Agate): unofficial build of twrp 3.6.0 have Now been available for the Xiaomi 11T user Who own Xiaomi 11T can Root it by following the below Instructions. to Install twrp Recovery on Xiaomi 11T first You need to...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried that a year ago but because of skill issue I wasn't able to fix my device when it bricked so we went to the carrier we bought it at and we said that it happened during an OTA update

If you need help rooting it or unbricking, let me know

Kiwironic said:
If you need help rooting it or unbricking, let me know
Click to expand...
Click to collapse
I have MIUI 14 mi pilot build no twrp supports this fw
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You don't need TWRP for root, just get unlocked bootloader and get the boot.img file from your rom and use the Magisk app to patch it then flash it with fastboot
Code:
Fastboot.exe flash boot magicbootimg.img

Same device and same rom, rooted already

Kiwironic said:
Same device and same rom, rooted already
Click to expand...
Click to collapse
Nice

Kiwironic said:
Same device and same rom, rooted already
Click to expand...
Click to collapse
Brother i used payload dumper but i can't see boot.img do i need fastboot Rom?

Stephanizgo said:
Brother i used payload dumper but i can't see boot.img do i need fastboot Rom?
Click to expand...
Click to collapse
Download the Full ROM (Fastboot) which is bigger and you can find the "boot.img" easier.
https://xiaomifirmwareupdater.com/miui/

I have downloaded the ROM from https://c.mi.com
Official Xiaomi Rom download site but the fastboot logo changed and I no longer have the bunny on fastboot

Send me a screen shot of your about screen and I will send you a modified boot.img but you can do it yourself from the link I sent you. if you look at their download links they are all from mi servers.

https://bigota.d.miui.com/V14.0.3.0.TKWMIXM/agate_global_images_V14.0.3.0.TKWMIXM_20230105.0000.00_13.0_global_576aee87ab.tgz

Stephanizgo said:
View attachment 5865685
Click to expand...
Click to collapse
Hello sir , please Can you make a full video tutorial on how to root the device ?

0xHelium said:
Hello sir , please Can you make a full video tutorial on how to root the device ?
Click to expand...
Click to collapse
First you need to unlock the bootloader

Then follow these steps:
1 - Download the Fastboot ROM file for your device
2 - Extract the boot.img file from the ROM file, then copy it to your device's storage
3- Download the Majesk app and install it, then flash the boot.img file from inside the Majesk, you will have a new file named Majesk_patch.img in your downloads folder, copy it to your computer
4 - Then download the ADB platform and open it and open the command prompt from within the folder "Make sure to copy the file that you flashed into Magisk from copying it into the folder"
5 - Put your phone into fastboot mode by pressing the power key and volume down, then connect it to the computer, and type the following command at the command prompt:
fastboot flash boot boot.img " Here is the file that I copied inside the adb folder after changing its name to boot.img"
Then type the following command to restart the phone:
fastboot reboot
Congratulations, your phone has been successfully rooted
*I apologize if my writing is bad because I use Google Translate because I am not good at English*

0xHelium said:
Hello sir , please Can you make a full video tutorial on how to root the device ?
Click to expand...
Click to collapse
Once my brother returns my S10 I will probably

strayh_ said:
Then follow these steps:
1 - Download the Fastboot ROM file for your device
2 - Extract the boot.img file from the ROM file, then copy it to your device's storage
3- Download the Majesk app and install it, then flash the boot.img file from inside the Majesk, you will have a new file named Majesk_patch.img in your downloads folder, copy it to your computer
4 - Then download the ADB platform and open it and open the command prompt from within the folder "Make sure to copy the file that you flashed into Magisk from copying it into the folder"
5 - Put your phone into fastboot mode by pressing the power key and volume down, then connect it to the computer, and type the following command at the command prompt:
fastboot flash boot boot.img " Here is the file that I copied inside the adb folder after changing its name to boot.img"
Then type the following command to restart the phone:
fastboot reboot
Congratulations, your phone has been successfully rooted
*I apologize if my writing is bad because I use Google Translate because I am not good at English*
Click to expand...
Click to collapse
thanks, i combined this with an old thread and my phone is rooted