Hii...Ive a Big problem with this.....My SGY is under warranty....custom bin counter is 1,but my frnd told me that it voids warranty.....how to reset this????
Is it possible using Hard reset???
Anybody help me??
unresolved yet
there is no proven technique, which is commonly known, allowing to reset the flash counter. it resides in a hidden partition. even the USB jig won't help ya.
Related
It seems that my camera and soft reset are not working..and I do not hv much time to leave my handset in the service center as they take a lomg time.I need help for
Hard reset with a osftware
Bootloader mode with a software.
I tried "Clear Storage" from Universal but it doesn't work.I also tried the EnterBootloader.exe...it also doesn't work.
Can any one pls help
have you tried upgrading your rom?maybe that could fix your problem. just remember to backup all your data 1st!
Ill try again then .. Can I somehow reset or reflash the BA from bootloader? 'Cause I can't hard reset the ppc and i cant boot it. It freezes at boot screen and when i hard reset it freezes at the white screen..
HEELP!
Spixe
You cannot do Hard Reset without... Hard resetting the device.
You can flash new ROM and make no Hard Reset, but it doesn't guarantee you will be able to boot BA, as registry stays untouched and may still prevent BA from booting. Moreover, if you use different ROM, additional problems may push the problem further.
Flashing in bootloader is... standard method of flashing. You can use SD card method or USB. You cannot flash the deivce when it is booted in windows, so I see no problem there.
What puzzles me is "white screen" on hard reset: if indeed this is an HR (how do you initiate it?) even after flashing different ROM, this might be just hardware error and all you can do is to say bye bye to your BA.
jakubd said:
You cannot do Hard Reset without... Hard resetting the device.
You can flash new ROM and make no Hard Reset, but it doesn't guarantee you will be able to boot BA, as registry stays untouched and may still prevent BA from booting. Moreover, if you use different ROM, additional problems may push the problem further.
Flashing in bootloader is... standard method of flashing. You can use SD card method or USB. You cannot flash the deivce when it is booted in windows, so I see no problem there.
What puzzles me is "white screen" on hard reset: if indeed this is an HR (how do you initiate it?) even after flashing different ROM, this might be just hardware error and all you can do is to say bye bye to your BA.
Click to expand...
Click to collapse
After ive selected the settings in debugger screen that resets and then pushed the mail button, the white screen shows up. And it stays.
Ive tried to flash it, but in the guide it said that i should hard reset. It wouldnt boot after the flash, so i thought that it was a "must" the HR (Hard Reset i assume). How do i flash it in another way? I follewed the Wiki guide.
Spixe (and sorry for my english. Not perfect - I know )
i hope i`m in not in the wrong forum i just wanna know if there is anyone who knows how to unbrick the daxian t32 the probleme is after a hard reset the phone doesn`t boot i mean it satys in the blue screen and doesn`t move to the windows mobile green screen....if anyone familliar with this plz help thnx .....
I'm currently having the same problem with mine,and I can't seem to find a way around it...I'm going to have to take advantage of the warrenty and send it back to the manufacture.
Hard Reset to unbrick
Press the reset hole and press the two side buttons above.
Keep those two buttons pressed until the system perform a hard reset.
Doing so again as it left the factory.
More sorry my english is not very good.
When you use a USB Jig to reset the flash counter, will it trip the anti-flash counter?
i actually don't think the jig works to flash our device's counter. I remember i read that somewhere, not sure where.. it was a month or two ago. The only use we have for it now is to get into download and hopefully saving our phones from softbricks.. but the flash counter remains the same.
Teo032 said:
i actually don't think the jig works to flash our device's counter. I remember i read that somewhere, not sure where.. it was a month or two ago. The only use we have for it now is to get into download and hopefully saving our phones from softbricks.. but the flash counter remains the same.
Click to expand...
Click to collapse
If you're not sure then why offer advice ? I can confirm the jig works for both download and counter reset. AllGamer has confirmed this also in the same thread as me.
I've done my fair share of searching and I couldn't come up with much so I strongly believe I have a unique problem. I hope someone can point me in the right direction
Im have a rooted GS3 747 running Paranoid Android. A couple days ago the phone wouldn't charge. I tried different cables and batteries and after some testing with other GS3's I realized that my phone's charging port was broken. As a result I couldn't even connect my phone to the computer to unroot it with odin. I want to unroot so I can send in the phone for repair under warranty. So I downloaded mobile odin pro and proceeded to unroot my phone. I copied the original rogers rom to the external sd, followed the instructions and started the process. Everything looked like it was going fine until I got stuck on the samsung screen. Did some more research and learned that I had to do a factory data restart by booting into recovery mode. Did that. By now I'm feeling pretty good about all this. I followed the instructions all the way and I'm thinking that I'm gonna get a stock phone shortly. Wrong! The phone was still stuck on the samsung screen.
Now since I cant connect my phone to the PC cuz the charging port is broken I dont know what to do. I would have just flashed Clockwork Mod like I did when I first rooted and started all over but I cant.
If no one has a solution then Im just thinking of sending it in as is. Maybe they wont be able to see that the phone is rooted since they wont be able to connect it their PC without swapping out the motherboard to fix the problem.
I should add that I went to a repair store to try and fix it and they told me that the only way would be swap out your mobo.
machdown said:
I've done my fair share of searching and I couldn't come up with much so I strongly believe I have a unique problem. I hope someone can point me in the right direction
Im have a rooted GS3 747 running Paranoid Android. A couple days ago the phone wouldn't charge. I tried different cables and batteries and after some testing with other GS3's I realized that my phone's charging port was broken. As a result I couldn't even connect my phone to the computer to unroot it with odin. I want to unroot so I can send in the phone for repair under warranty. So I downloaded mobile odin pro and proceeded to unroot my phone. I copied the original rogers rom to the external sd, followed the instructions and started the process. Everything looked like it was going fine until I got stuck on the samsung screen. Did some more research and learned that I had to do a factory data restart by booting into recovery mode. Did that. By now I'm feeling pretty good about all this. I followed the instructions all the way and I'm thinking that I'm gonna get a stock phone shortly. Wrong! The phone was still stuck on the samsung screen.
Now since I cant connect my phone to the PC cuz the charging port is broken I dont know what to do. I would have just flashed Clockwork Mod like I did when I first rooted and started all over but I cant.
If no one has a solution then Im just thinking of sending it in as is. Maybe they wont be able to see that the phone is rooted since they wont be able to connect it their PC without swapping out the motherboard to fix the problem.
I should add that I went to a repair store to try and fix it and they told me that the only way would be swap out your mobo.
Click to expand...
Click to collapse
You will want to be sure that your flash counter says 0. This can be found by entering download mode (vol down, home, power) and you will see "custom binary count". that is how they will tell that you have rooted. Have you entered recovery and done a factory reset to get past the boot screen? If you can full wipe/ factory reset and get back into Android, I recommend you use "triangle away" app to clear your flash counter.
BCSC said:
You will want to be sure that your flash counter says 0. This can be found by entering download mode (vol down, home, power) and you will see "custom binary count". that is how they will tell that you have rooted. Have you entered recovery and done a factory reset to get past the boot screen? If you can full wipe/ factory reset and get back into Android, I recommend you use "triangle away" app to clear your flash counter.
Click to expand...
Click to collapse
I entered download mode and dont see flash counter anywhere. I got the warning screen were you have the option to restart or download.
Ya I entered recovery and did a factory reset but nothing. Really cant do anything with charging port broken.
I sent it in anyways for repairs. Hopefully they just replace it
I'm having the same problem with my Gs3 with CM10 4.2.2 running. Thought this would help.
Sent from my SPH-L710 using xda app-developers app