Hello all
I am a noob about flashing custom roms and i want to try the AOKP BUILD 25 for my nexus just to try it.
So my nexus has the following:
Phone: MAGURO GSM
Android OS: yakju 4.0.2 ICL53F
I WANT YOU PEOPLE TO HELP ME IF I GET THESE STEPS CORRECT(so i dont mess up my much loved nexus)
1.Make a backup with CWM(is this what you guys call NANDROID???)
2.Wipe data/factory reset in CWM
3.Put the ROM at the root of sd card on the phone(in pc i connect the nexus and put them right after the galaxu nexus drive where everything is???)
4.Flash AOKP BUILD 25(Do i need to flash previous build before i flash buid 25)
5.Flash Gapps
6. Reboot
My other questions are:
1.Everytime you flash a custom rom,Gapps,custom KERNEL,RADIO, I do these steps one by one or all at the same time????
2.The md5 sums i put them together with the ROM OR GAPPS on the phone or is just for me to check if they are correct
3.If a make a factory/data reset in CWM doesn't that delete my CWM and Titanium apps back ups???
4.Last one is if a flash a custom rom like AOKP 25 after that i cant restore system apps and data???
Thank you all people in advance for your very apreciated help.
Badtazm
badtazm said:
1.Make a backup with CWM(is this what you guys call NANDROID???)
2.Wipe data/factory reset in CWM
3.Put the ROM at the root of sd card on the phone(in pc i connect the nexus and put them right after the galaxu nexus drive where everything is???)
4.Flash AOKP BUILD 25(Do i need to flash previous build before i flash buid 25)
5.Flash Gapps
6. Reboot
Click to expand...
Click to collapse
Correct.
My other questions are:
1.Everytime you flash a custom rom,Gapps,custom KERNEL,RADIO, I do these steps one by one or all at the same time????
Click to expand...
Click to collapse
Depends on what you're flashing. If you're just updating GAPPS or to a new version of the same ROM you don't have to do a full wipe. That'd be a hassle. Only wipe if they recommend it for the update, or you're switching to a completely different ROM.
2.The md5 sums i put them together with the ROM OR GAPPS on the phone or is just for me to check if they are correct
Click to expand...
Click to collapse
That's to check that you had a proper download.
3.If a make a factory/data reset in CWM doesn't that delete my CWM and Titanium apps back ups???
Click to expand...
Click to collapse
Its meant to preserve your data but wipe the system for re-flashing.
4.Last one is if a flash a custom rom like AOKP 25 after that i cant restore system apps and data???
Click to expand...
Click to collapse
You can restore user apps + data. I would stay away from restoring system data as it usually causes more problems than its worth. As a precaution I like to do a nandroid of the clean ROM before batch restoring with TiBU, because restoring lots of apps can mess things up and you don't wanna wipe and reflash because you borked a restore.
martonikaj said:
Correct.
Depends on what you're flashing. If you're just updating GAPPS or to a new version of the same ROM you don't have to do a full wipe. That'd be a hassle. Only wipe if they recommend it for the update, or you're switching to a completely different ROM.
That's to check that you had a proper download.
Its meant to preserve your data but wipe the system for re-flashing.
You can restore user apps + data. I would stay away from restoring system data as it usually causes more problems than its worth. As a precaution I like to do a nandroid of the clean ROM before batch restoring with TiBU, because restoring lots of apps can mess things up and you don't wanna wipe and reflash because you borked a restore.
Click to expand...
Click to collapse
thanks man just two more question..
1.Do i need to flash previous builds before i flash buid 25??
2.And i flash the Milestone 3 after i flash AOKP BUILD 25 AND GAPPS???
badtazm said:
thanks man just two more question..
1.Do i need to flash previous builds before i flash buid 25??
2.And i flash the Milestone 3 after i flash AOKP BUILD 25 AND GAPPS???
Click to expand...
Click to collapse
no and no
25 is the full rom (outside of gapps) and i think more current than milestone 3.
all you'd need to do is flash aokp 25 and then gapps.
Thanks very much guys i m going to try it right now and we ll see if i succeed..
Related
I have a AT&T Samsung Galaxy S3 (SGH-1747) that is running stock with root.
I have rooted my phone using the samsung toolkit located here: http://forum.xda-developers.com/showthread.php?t=1746665
Since that toolkit flashed a CWM Based recovery I have installed ROM Manager and flashed CWM Recovery version 6.0.1.2
My questions are..
- with my current setup.. am I technically running the "Stock" samsung kernel?
- why would you want to flash a different kernel to your phone?
- and is it necessary to flash a different kernel in order to use certain custom roms?
- At first I was leaning towards flashing CM10 nightly but the more I look at it.. I want to flash PARANOIDANDROID 2.22 http://forum.xda-developers.com/showthread.php?t=1818199
Is this rom fully compatible with my AT&T phone? and since i'm running stock with root, do I need to do anything special before flashing this rom? Factory reset? Wipe Data? I've already made a full nandroid backup.
Thank you!
- with my current setup.. am I technically running the "Stock" samsung kernel? I believe so
- why would you want to flash a different kernel to your phone? Different kernels do different things.. some have better batter life.. some let you OC and UC..
- and is it necessary to flash a different kernel in order to use certain custom roms?Well sometimes.. Well technically.. most kernels will work with most of the ROMS out there.. as long as you stay withing your phones threads.. But some ROMs have a kernal with them.. and some ROMS you need to flash your own kernel..
Diamond22 said:
- with my current setup.. am I technically running the "Stock" samsung kernel? I believe so
- why would you want to flash a different kernel to your phone? Different kernels do different things.. some have better batter life.. some let you OC and UC..
- and is it necessary to flash a different kernel in order to use certain custom roms?Well sometimes.. Well technically.. most kernels will work with most of the ROMS out there.. as long as you stay withing your phones threads.. But some ROMs have a kernal with them.. and some ROMS you need to flash your own kernel..
Click to expand...
Click to collapse
Thank you for the reply.
On the rom i'm wanting to flash for my SGH-i747 http://forum.xda-developers.com/showthread.php?t=1818199
The steps for flashing are as follows:
CWM: Install Zip: Rom: Download Here Make sure the file you download is PA-2.22-d2att.zip
CWM: Install Zip: Gapps: Download (These are the new ones)
CWM: Wipe Data/Factory Reset
CWM: Advanced/Wipe Dalvik Cache
Reboot and edit your Apps Dpi & Layout under Settings/Paranoid Settings - DO NOT RESTORE YOUR OLD PROPERTIES FOR NOW
Would i need to wipe data, factory reset, then also wipe dalvik cache BEFORE I install the rom and gapps since i'm running stock with root?
Thank you
i'm also reading that for paranoidandroid you must first flash CM10 then flash paranoid.. is this accurate?
umm.. not sure where you saw that you need to flash a CM rom before flashing the paranoid ROM..
I believe the Paranoid rom is based off CM
The instruction on the link you have, in my opinion, is wrong..
The way that i flash my roms is...
Wipe data/factory reset..
Wipe Cache
Wipe Dalvik
Format/Data
Fomat/System ( i think deletes backups) only do in emergency.aka optional step
Flash ROM
Flash Gapps.
THATS IT
Some people will wipe cache afer flashing a rom..
But if you wipe data/factory reset i believe deletes the ROM...
Diamond22 said:
umm.. not sure where you saw that you need to flash a CM rom before flashing the paranoid ROM..
I believe the Paranoid rom is based off CM
The instruction on the link you have, in my opinion, is wrong..
The way that i flash my roms is...
Wipe data/factory reset..
Wipe Cache
Wipe Dalvik
Format/Data
Fomat/System ( i think deletes backups) only do in emergency.aka optional step
Flash ROM
Flash Gapps.
THATS IT
Some people will wipe cache afer flashing a rom..
But if you wipe data/factory reset i believe deletes the ROM...
Click to expand...
Click to collapse
If you are already running CM10 then you don't need to wipe Cache. Just dalvik and data. Im pretty sure thats what was confusing, since this is based off of CM10.
DarthDerron said:
If you are already running CM10 then you don't need to wipe Cache. Just dalvik and data. Im pretty sure thats what was confusing, since this is based off of CM10.
Click to expand...
Click to collapse
yeah, I just keep reading and reading.. probably making this out to be more difficult than it really is just don't want to end up with a brick or anything.
I'm already on stock + root + latest CWM so I just need to put the files on my phone and flash but I believe these are the steps i need to take:
1- Download ROM and Gapps to internal sd card
2- Boot phone into recovery
3- WIPE Cache/Delvik/Data factory reset> Mounts and Storage- format system
4- Flash ROM and Gapps
Right now I am running jb build 5, and I want to update it to jb milestone 1.
My question is simple, can you dirty flash it? I know that people who ask about dirty flash should be "killed", but I'm new to this Android and flashing ROM.
h7779 said:
Right now I am running jb build 5, and I want to update it to jb milestone 1.
My question is simple, can you dirty flash it? I know that people who ask about dirty flash should be "killed", but I'm new to this Android and flashing ROM.
Click to expand...
Click to collapse
U can dirty flash it. But if it bricks your phone don't get mad. If I was you I would wipe wipe and wipe some more ...
But like you said, your new to android. Do what you think is right for your phone.
Good luck
Sent from my SGH-T959 using Tapatalk 2
People who ask about dirty flash should be killed.
If it bricks your phone, don't get mad?
Click to expand...
Click to collapse
Seriously?
Dirty flash it. People who clean flash every nightly like wasting their time. I've outlined my feelings on this issue more than once. Wipe Dalvik and be done with it.
I have always dirty flashed AOKP between builds on my previous phone with only wiping cache/dalvik cache. Only time I full wipe is when there are significant changes or Android version jump. Never had any problems. Here's my recommendation for dirty flashing:
If you have Google Wallet installed on /system partition, reset it first.
1. Boot into recovery
2. Wipe cache and dalvik cache
3. Run a nandroid backup. Always do this.
4. Copy the nandroid backup to your PC or somewhere safe
5. Flash the new build
6. Flash gapps
7. Flash custom kernel (optional)
8. Reboot and profit
Dirty flash or full wipe flash, there always are possibilities for problems. Sometimes you could have a bad flash, just reflash or restore the nandroid and reflash.
S-Beamed from my GS3 via xda premium
[email protected] said:
I have always dirty flashed AOKP between builds on my previous phone with only wiping cache/dalvik cache. Only time I full wipe is when there are significant changes or Android version jump. Never had any problems. Here's my recommendation for dirty flashing:
If you have Google Wallet installed on /system partition, reset it first.
1. Boot into recovery
2. Wipe cache and dalvik cache
3. Run a nandroid backup. Always do this.
4. Copy the nandroid backup to your PC or somewhere safe
5. Flash the new build
6. Flash gapps
7. Flash custom kernel (optional)
8. Reboot and profit
Dirty flash or full wipe flash, there always are possibilities for problems. Sometimes you could have a bad flash, just reflash or restore the nandroid and reflash.
S-Beamed from my GS3 via xda premium
Click to expand...
Click to collapse
Thanks for all of the responses, I'll just dirty flash it. Also I have brick my phone twice now and was able to unbrick it, so I'm not really worry about bricking it again.
How do you flash back to a previous nightly? What are the steps I know I have to make sure I have the nightly I want to flash to on my SD card, but before I can do that what caches do I need to wipe?
Current: D2att cyangogen nightly12/28/12
to --> nightly12/27/12
khep24 said:
How do you flash back to a previous nightly? What are the steps I know I have to make sure I have the nightly I want to flash to on my SD card, but before I can do that what caches do I need to wipe?
Current: D2att cyangogen nightly12/28/12
to --> nightly12/27/12
Click to expand...
Click to collapse
Wipe cache and dalvik. If you have any problems that weren't there before a full wipe might be needed.
Also for future reference you should use a more descriptive title when posting questions.
Not sure what you mean by flash to a previously nightly, I am guessing you would like to restore your phone to a previous backup?
If so you need to use something like ROM manager and grant superuser permissions to it. From there you can create backups and restore points from your custom ROM`s. You can either restore from inside the phone or from CWM recovery mode.
Personally for me everytime I flash a new ROM on my phone I hop into CWM recovery and do a factory wipe and reset, wipe cache, and then go to advanced and wipe dalvik.
If I have been messing around with the same Custom ROM, changing widgets, apps etc, I back up using ROM Manager and just restore back to something if I don`t like the changes I have made.
Hope that helps.
jefferson9 said:
Wipe cache and dalvik. If you have any problems that weren't there before a full wipe might be needed.
Also for future reference you should use a more descriptive title when posting questions.
Click to expand...
Click to collapse
Thank you very much, and will do I'm pretty new to this I'm just trying to figure out all the correct steps so I won't brick.
I've been flashing the nightly cyaongenmod 10.1 builds on my i747m using cwm.
Is there a way to prevent losing all the settings and apps that I have? For example, if I don't clear data/cache will this cause bad things to happen?
Or is there another way to do this?
nmunro said:
I've been flashing the nightly cyaongenmod 10.1 builds on my i747m using cwm.
Is there a way to prevent losing all the settings and apps that I have? For example, if I don't clear data/cache will this cause bad things to happen?
Or is there another way to do this?
Click to expand...
Click to collapse
Get titanium backup and do a full backup of your apps/data. When you restore, dont restore any system app but you can restore the rest.
And to avoid problems, always clear cache/dalvik.
nmunro said:
I've been flashing the nightly cyaongenmod 10.1 builds on my i747m using cwm.
Is there a way to prevent losing all the settings and apps that I have? For example, if I don't clear data/cache will this cause bad things to happen?
Or is there another way to do this?
Click to expand...
Click to collapse
All you need to do is download the new nightly that you wanna flash, boot into recovery, flash the nightly. If you have any other files that you wanna flash like a kernel, flash them after the nightly. Clear cache & dalvik cache & reboot. You won't lose any apps or settings doing it this way. This is how I update every day. Now if you wanna do a clean install every single time you update, that's another story. The way I just explained to you will work just fine. There is no need in wiping EVERYTHING for every update.
Sent from my Galaxy S3
RobbieL811 said:
All you need to do is download the new nightly that you wanna flash, boot into recovery, flash the nightly. If you have any other files that you wanna flash like a kernel, flash them after the nightly. Clear cache & dalvik cache & reboot. You won't lose any apps or settings doing it this way. This is how I update every day. Now if you wanna do a clean install every single time you update, that's another story. The way I just explained to you will work just fine. There is no need in wiping EVERYTHING for every update.
Sent from my Galaxy S3
Click to expand...
Click to collapse
It's not only about wiping everything (Clean flash), having a backup is always good and *needed* imo. Never know when something will go wrong, could be as simple as a corrupted download.
So just to confirm, if I download the latest nightly, boot into cwm, clear cache and dalvik, but don't delete user data, then flash ROM and gapps, it will have all my settings and apps already setup?
nmunro said:
So just to confirm, if I download the latest nightly, boot into cwm, clear cache and dalvik, but don't delete user data, then flash ROM and gapps, it will have all my settings and apps already setup?
Click to expand...
Click to collapse
Yes.
Should still concider Tibu. Friendly suggestion.
nmunro said:
So just to confirm, if I download the latest nightly, boot into cwm, clear cache and dalvik, but don't delete user data, then flash ROM and gapps, it will have all my settings and apps already setup?
Click to expand...
Click to collapse
Yes.
Sent from my Galaxy S3
---------- Post added at 11:22 AM ---------- Previous post was at 11:21 AM ----------
BWolf56 said:
It's not only about wiping everything (Clean flash), having a backup is always good and *needed* imo. Never know when something will go wrong, could be as simple as a corrupted download.
Click to expand...
Click to collapse
Thanks. I didn't think about mentioning that. It's kind of a given to me to keep a good nandroid. Some people may not know though. Thanks for adding that.
Sent from my Galaxy S3
I have a touchwiz nandroid and a cm10 nandroid on my SD card and my computer.
Will I have to flash gapps again or will that already be there?
nmunro said:
I have a touchwiz nandroid and a cm10 nandroid on my SD card and my computer.
Will I have to flash gapps again or will that already be there?
Click to expand...
Click to collapse
Gotta flash the Gapps everytime you flash a ROM. (Their respective one)
nmunro said:
I have a touchwiz nandroid and a cm10 nandroid on my SD card and my computer.
Will I have to flash gapps again or will that already be there?
Click to expand...
Click to collapse
You will only have to flash Gapps the first time. If you update like I told you, you will not have to flash them.
Sent from my Galaxy S3
Changing from stable to nightly
Hi,
I'm currently running on a cm 10.1.3 stable (note 2 N7100). I would like to install cm-11-20141027-NIGHTLY-n7100. Do i have to do a complete wipe or just flash the downloaded file from recovery.
cm upgrade manually w/o losing data
RobbieL811 said:
All you need to do is download the new nightly that you wanna flash, boot into recovery, flash the nightly. If you have any other files that you wanna flash like a kernel, flash them after the nightly. Clear cache & dalvik cache & reboot. You won't lose any apps or settings doing it this way. This is how I update every day. Now if you wanna do a clean install every single time you update, that's another story. The way I just explained to you will work just fine. There is no need in wiping EVERYTHING for every update.
Sent from my Galaxy S3
Click to expand...
Click to collapse
Does it apply to stable updates and upgrades also and not only for nightly?
Can I use the same method for updating CM11s to CM12 whenever they release...?
Titanium Backup
Will the Titanium Backup * root be the correct one, or the Titanium Pro?
Hello, i'm a fresh man on my P936.
I got some trouble on flashing roms except of stock rom (full rom).
In my case, I can:
1. Access to CWM
2. Flash stock rom, stock-modificatied rom or full rom successfully
However, I failed in
1. flashing other roms likes PAC-man rom, ChaOS and etc third party rom. After I flashing those rom, and reboot my phone. The screen did not show anything, dark screen with LCD background light.:crying:
I have follow those inspections and tried many times.
Does any users have those experience before? And how can I solve it?
Thanks a lot:angel:
before you flash a non stock rom you need to wipe data, cache, dalvik, wipe battery stats (optional)
also do a nandroid backup before you wipe incase the new rom doesn't work for whatever reason, i had a problem flashing pacrom though too btw, it might just be the rom. you can try an older version or something too
If you're coming from another ROM It is recommended that you first do backup then FULL wipe then flash ROM
kidcalcium said:
If you're coming from another ROM It is recommended that you first do backup then FULL wipe then flash ROM
Click to expand...
Click to collapse
that's what he said ^^
OGPunc said:
that's what he said ^^
Click to expand...
Click to collapse
I did it, but fail to install PAC ram.
I tried
1. FULL Wipe -> install .zip reboot
2. FULL Wipe -> install .zip reboot -> FULL Wipe
but all the results are fail
ki1233 said:
I did it, but fail to install PAC ram.
I tried
1. FULL Wipe -> install .zip reboot
2. FULL Wipe -> install .zip reboot -> FULL Wipe
but all the results are fail
Click to expand...
Click to collapse
Which PAC are you flashing? Some recent nightless do not boot.
Try CM10.1RC5
mpsantiago said:
Which PAC are you flashing? Some recent nightless do not boot.
Try CM10.1RC5
Click to expand...
Click to collapse
The RC ver is OK, but the latest version (17-6-2013) cannot boost.
ki1233 said:
The RC ver is OK, but the latest version (17-6-2013) cannot boost.
Click to expand...
Click to collapse
Yeah its a bug. Try flashing Wind 2.3 immediately after flashing CM (or PAC) and gapps, with no reboots between.
mpsantiago said:
Yeah its a bug. Try flashing Wind 2.3 immediately after flashing CM (or PAC) and gapps, with no reboots between.
Click to expand...
Click to collapse
:victory:
thanks a lot
Thanks, this helped me too.