Any one, who has download that firmware. Please tell me, what type of that firmware? Multiple files or Single file?
I want to flashing with odin, but odin just support multiple files.
Thanks..
multi file
Its Multiple File And Flash With Odin.......
Download All Rom (Stock rom)
__________________________________________
Don'T Forget To Say Thank,If You Like My Post.
orieoke said:
Any one, who has download that firmware. Please tell me, what type of that firmware? Multiple files or Single file?
I want to flashing with odin, but odin just support multiple files.
Thanks..
Click to expand...
Click to collapse
Multi files (splitted by me, tested:OK)
http://forum.xda-developers.com/showthread.php?t=1465800
S5360_DXLA1_OLBLA1_DXLA1
Related
How to flash / update this set,mates?Where to load this S5360XXKL3_S5360OXFKL3_S5360XXKL3_HOME.tar.md5 file?There's so many threads about it and no answer!!?
please close this threat,there are so many like this.
Gsm UK said:
How to flash / update this set,mates?Where to load this S5360XXKL3_S5360OXFKL3_S5360XXKL3_HOME.tar.md5 file?There's so many threads about it and no answer!!?
Click to expand...
Click to collapse
Go search
http://forum.xda-developers.com/showthread.php?t=1465800&page=5
for ur firmware
the whole xda has this question about 98 times or even more that odin cannot flash single packages...of firmware use the above link to download ur firmware and use it with odin
NOTE:dont use any pit file while flashing
Gsm UK said:
How to flash / update this set,mates?Where to load this S5360XXKL3_S5360OXFKL3_S5360XXKL3_HOME.tar.md5 file?There's so many threads about it and no answer!!?
Click to expand...
Click to collapse
Since its a single file, load it to PDA, better yet slice it using splitfus..
BTW there is a thread by doky with pre sliced ROMS, or you can request from his thread
>>ASK IN FAQ<<
>>USE SEARCH BAR<<
Hi
Please I'd like to know if it's possible to create a Complete ROM (3 files - Modem, PDA and CSC) from an One Package ROM (only one .TAR file).
And is that really useful? After this process, can we only flash the CSC file with Odin (Desktop)?
Thanks for your help. (always appreciated help)
Yes you can extract single ROM file and later create tar file for each component
Alternatively you can use mobile odin to flash indivudual components.
Thanks dr.ketan.
Extracting a tar file we obtain several img files (system.img, hidden.img, boot.img, recovery.img...) (from my own experience with an official rom of a French telephone company).
How could I know which img files is for the Odin's fields PDA, Phone, CSC...?
Alternatively you can use mobile odin to flash indivudual components.
Click to expand...
Click to collapse
Atm I don't have Mobile Odin. Do u mean that we can flash .img file thanks to this app?
And do u know if this kind of Full Package flash is better than a One Package one? The result could be different?
Thanks again for your explanation.
System. Is PDA, modem is phone, boot is kernel, recovery is recovery this is different component of ROM file
Single file flashing flash all required component on one go, while individual useful when you want to flash only single component.
PC odin can flash tar file but not. img file, you have to convert it to tar
While mobile odin can flash tar as well img file too.
Sent from my GT-N7100 using xda premium
All what I need to understand
Thanks again.
Ready to flash firmware, just one last thing
Hello, I have a gt-n7100 which I bought in china and I am looking in to flashing the firmware into the UK version as this chinese version has bloatware and i cant access google play or install many apps even if i get them from other markets. The guys here are all a great help but im stuck on one bit of info.
As I have read the threads, I see that the chinese note 2 cannot be flashed with other firmware using Odin PC, because it has a different bootloader ..(is my understanding correct?) So the solution would be to root it and use Odin Mobile instead. But i cant get mobile odin pro because i can never access the google play because it is blocked by this firmware. (ZCALJ6) So I have to use mobile odin LITE, which the tutorial says I have to manually download and install seperate files such as flash kernels. Thats fine, I located the files needed but i dont know when to install it and run it ? Before I install odin or after? or after I have flashed the new firmware or before? And when I install it what should i do next?....because i couldnt find where it says anything about that process, just goes on to explain that mobile odin PRO does it all for you automatically and picks it up from there.
Seriously in need of help, this chinese firmware does to note 2 what kryptonite does to superman.
Hello, somehere can help me to change the baseband of s6810E (by a s6810L) to make to capture 3g signal in my country.
List of things I've tried
Install via ODIN a s6810L ...
nand write start fail
Click to expand...
Click to collapse
Extract BcmCP.img and create Modem.tar ...
receive response from bootloader fail
Click to expand...
Click to collapse
Combine s6810L and s6810E firmware and create tar.md5 ...
md5 cheksum fail
Click to expand...
Click to collapse
The phone only accept a s6810E firmwares via odin
The phone already has a cwm install
Thanks
GinoXLL said:
Hello, somehere can help me to change the baseband of s6810E (by a s6810L) to make to capture 3g signal in my country.
List of things I've tried
Install via ODIN a s6810L ...
Extract BcmCP.img and create Modem.tar ...
Combine s6810L and s6810E firmware and create tar.md5 ...
The phone only accept a s6810E firmwares via odin
The phone already has a cwm install
Thanks
Click to expand...
Click to collapse
maybe you can try make tar and md5 extension with pea zip
faizauthar12 said:
maybe you can try make tar and md5 extension with pea zip
Click to expand...
Click to collapse
Thanks for your help, but I still can flash via odin a different original system.
I think another option would be to copy a model L efs partition and put it on my phone, since the only difference between these 2 models are the 3G bands.
But the efs partition is one that contains the information of the modem?
or file or folder I need to copy it from another phone settings for bands?
Did you manage it ?
I tried to do exactly like you.
Tried to repackage Latin modem for my S6810...
But could never flash a Latin Modem on this phone.
Did you manage to do it ?
So I downloaded the stock 7.0 firmware from a link here on XDA. Upon opening the .rar file i was presented with multiple files and I am not sure which one I am supposed to flash. Here is a pic of all the files I have. Just click on the link below. Can someone tell me which one I am supposed to use to flash my phone back to stock android.
https://ibb.co/kFc5Ed
ok so I select the files for AP CP BL and Home_CSC like it said o do to make sure I get the binary. But it keeps failing when it starts to write new Firmware. I just need to get to stock firmware on this phone. Can someon Please help me figure out how to do this.
Hello people, I am new putting together posts, so I apologize if this should not go like this. Install a custom rom and now I would like to go back to how it was before. I am not sure what I have to look at, or The firmware that I have to download. Thank you very much and greetings.
Flash by odin
LucasUruguay said:
Hello people, I am new putting together posts, so I apologize if this should not go like this. Install a custom rom and now I would like to go back to how it was before. I am not sure what I have to look at, or The firmware that I have to download. Thank you very much and greetings.
Click to expand...
Click to collapse
Go find your latest firmware and download it, extract, open odin, put extracted files to BL AP SC CSC then strat flash
Ed15121998 said:
Go find your latest firmware and download it, extract, open odin, put extracted files to BL AP SC CSC then strat flash
Click to expand...
Click to collapse
perfect. I'm looking for any Android 10 firmware and that's it, right? and then use Odin
ha789di said:
Flash by odin
Click to expand...
Click to collapse
Yes, I know I have to flash for Odin. the issue is that I'm not sure which firmware I have to download haha
You have to download the stock firmware, I use samfirm.js you can use other tools though, when you donwload it, you should see 5 MD5 files, you need only 4 of them, the AP, BL, CP and CSC files. Flash them according to their name using odin.
LucasUruguay said:
Yes, I know I have to flash for Odin. the issue is that I'm not sure which firmware I have to download haha
Click to expand...
Click to collapse
[GUIDE] How to downgrade to Android 9
Make backups! Go to Settings - About Phone - Software information, and under 'Service provider SW ver.' you will see something like : '..._SM_A505FN_OXM_LUX_QQ..... etc...' The important thing is a: the model number, in my case A505FN and b...
forum.xda-developers.com