Develop Bugs

My Brief Subjective Seidio Innocase RUGGED Review

I received my Seidio Innocase Rugged Case and Holster for my EVO 4G. It consists of a Innocase II Surface, a soft plastic shell that wraps around the Innocase II Surface. The third and final piece is an exoskeleton that fits around the soft plastic shell. There is also a nicely built holster that has a nice locking button.
Fit- The fit is excellent, everything slips on tight but not too tight. Be careful not to pull off your screen protector when putting this case on your EVO.
Materials- The materials seem like they are tough and durable. The problem is that the soft plastic is very thin in the areas where the exoskeleton fits on it.
Durability- This solid feeling case should outlast my EVO in my opinion.
Protection- I doubt that this case provides more protection than the Active cases. I would like a thicker soft layer like the Active cases have. However, this rugged case does come with a sturdy clip and protection of ports and camera lens. The Surface case that the rugged fits around is also a plus for anyone that has need for a sleeker looking case at times.
Overall, I think I would be happier with an Otterbox type design, I think they are tougher. But the Rugged and Active are both available now. I would recommend the Innocase Active over the Rugged if you have no need for an included clip, camera lens protection and want to save some cash.
*The rugged case comes with a screen protector, which some have liked, I personally prefer something tougher.
This is my very subjective opinion, I'm sure I missed a few things. Please share your opinions as well!

firemedic1343 said:
I received my Seidio Innocase Rugged Case and Holster for my EVO 4G. It consists of a Innocase II Surface, a soft plastic shell that wraps around the Innocase II Surface. The third and final piece is an exoskeleton that fits around the soft plastic shell. There is also a nicely built holster that has a nice locking button.
Fit- The fit is excellent, everything slips on tight but not too tight. Be careful not to pull off your screen protector when putting this case on your EVO.
Materials- The materials seem like they are tough and durable. The problem is that the soft plastic is very thin in the areas where the exoskeleton fits on it.
Durability- This solid feeling case should outlast my EVO in my opinion.
Protection- I doubt that this case provides more protection than the Active cases. I would like a thicker soft layer like the Active cases have. However, this rugged case does come with a sturdy clip and protection of ports and camera lens. The Surface case that the rugged fits around is also a plus for anyone that has need for a sleeker looking case at times.
Overall, I think I would be happier with an Otterbox type design, I think they are tougher. But the Rugged and Active are both available now. I would recommend the Innocase Active over the Rugged if you have no need for an included clip, camera lens protection and want to save some cash.
*The rugged case comes with a screen protector, which some have liked, I personally prefer something tougher.
This is my very subjective opinion, I'm sure I missed a few things. Please share your opinions as well!
Click to expand...
Click to collapse
good review. I agree with you, just wish that amazon would stock the active so I could get one already!

ive got a rugged on the way for a few reasons:
-its two cases in one
-its got protection for the cam and ports
-it comes with a holser (i dont believe the active does)

dmc971989 said:
ive got a rugged on the way for a few reasons:
-its two cases in one
-its got protection for the cam and ports
-it comes with a holser (i dont believe the active does)
Click to expand...
Click to collapse
There is a set on the website that has an included holster. However, the price is $50 and it does not give you 2 cases or cam/port protection. If you need a holster the rugged is the best value right now.

firemedic1343 said:
There is a set on the website that has an included holster. However, the price is $50 and it does not give you 2 cases or cam/port protection. If you need a holster the rugged is the best value right now.
Click to expand...
Click to collapse
i got my rugged today and i must say im a fan...
its pretty much an innocase II with a soft ruber case around it and then another plastic shell to surround the soft rubber case
i would also like to mention that the holster has a locking feature, my regular innocase II holster did not have that
p.s. the port covers are very nice, but some of the covers (the head phone jack cover) worries me... i feel like its going to tear off of the case

I wish Amazon would hurry up and receive their stock.
Someone needs to put up a video & picture review of this case

redrazr7791 said:
I wish Amazon would hurry up and receive their stock.
Someone needs to put up a video & picture review of this case
Click to expand...
Click to collapse
why would anyone dislike your sig?

dmc971989 said:
i got my rugged today and i must say im a fan...
its pretty much an innocase II with a soft ruber case around it and then another plastic shell to surround the soft rubber case
i would also like to mention that the holster has a locking feature, my regular innocase II holster did not have that
p.s. the port covers are very nice, but some of the covers (the head phone jack cover) worries me... i feel like its going to tear off of the case
Click to expand...
Click to collapse
I like the idea of the locking holster, but my locking mechanism seems to unlock frequently with use.
I agree with you on the tearing issue, I'm just waiting for it to tear. The rubber is thinner than I'd like and with the amount of times you need to charge the phone, I'm anticipating a tear...

Innocase Rugged Review
I also just received my rugged case and thought I would share my thoughts on it.
As my brother often says, "It is amazing how the phone manufacturers spend so much time and effort to make the phones sleek and shiny and as soon as we get them we cover them up to protect them, hiding all the built in beauty."
The "killer" feature of this case/holster combination is the protection it offers. It doesn't make your phone look extra cool, easier to use, or anything of that sort. Other than protection you can now also carry your phone on your belt with the included holster.
You will find that after you put on the rugged case you will have to use the holster. This rugged double case makes your phone nearly twice as thick. It still fits in the pocket of my jeans, but it is very apparent that my phone is there.
I purchased the version that also includes the Innocase II Surface holster as well. In comparing the two holsters, you can quickly see that they are like night and day. The rugged holster will support belts that are almost twice as thick as the non rugged holster. The plastic on the rugged holster also looks to be slightly thicker through out. The rugged also includes a locking mechanism to prevent you from bumping into something and having your clip release your phone to the floor. I do find that the locking mechanism is a little tough to put into the lock position, but very easy to push to unlock.
The phone must have its face in on the holster. You will not be able to just clip the holster into your car and have your phone face out. It will not be usable as a poor man's car dock using just some twist ties or paper clips and an A/C vent. With the rugged part off, you can use the phone face out in the rugged holster. (I haven't tried seeing if that combination will allow access to the power ports to charge.
The screen protector went on easily and the included cloth fully cleaned all of the finger prints and grime off of my phone. It seems that the screen protector could have been slightly (very slightly) wider to fully fit the front of the phone. After putting on the Innocase II on the phone, I was unable to see the area that wasn't covered with the protector.
All of the buttons on the phone are easily hit even though they are covered with silicone. This includes the power button as well as the volume up and down buttons. You can hit them just as easily as when they were not covered.
The USB and HDMI port cover reminds me a bit about the usb port cover on my wife's Palm Pixi. You can get it off, but it would help to have longer finger nails. I was glad when my USB port cover previously broke off of my Palm Pre and made it always available.
The camera cover seems like a very nice feature. Almost no camera would exclude something to cover the lens when not in use. Yet almost no phones try to cover it up at all. Since the EVO also has the lens stick out the back of the phone this can be a real worry. I definately like the idea of having a cover, but it does have a few draw backs. First it is a pain ot open. It took me a bit to get it, but I found that the two finger solution seems to work. Use one finger to press down on the little piece of rubber and then another to pull it out. It is too bad it doesn't work much more like the kickstand where you can press on one side and it pops open. It does latch into the hard plastic exoskeleton, but it can take a bit to get it to stay. The camera cover also covers the speaker on that back, so you might need to uncover it when talking on the speaker phone. Overall I like the camera cover.
The headphone cover seems to be the easiet cover to open. It left plenty of room when open for me to put in my headset. In saying this, my headset has a vary narrow plug, so your milleage may vary.
The case does not seem to effect my signal coverage at all. I can hold my phone in the left or right hand and still get 5 bars of signal. I can also get a gps lock with this case on my phone.
I tested throwing my phone down onto hard ceramic tile in my kitchen and was unable to see any damage to my phone or the case. (just kidding)

davebu said:
why would anyone dislike your sig?
Click to expand...
Click to collapse
You'd be surprised...

i would also like to add that the evo in just the Innocase II will fit in the holster "face out"... and lock in just fine
soooo:
full rugged case - holster works with screen facing in
just innocase II - holster works with screen facing out

Went out with my friends yesterday, showed one of them the rugged case, he looked at it and goes: "throw it" I was confident in the case but not the screen, so i decided to drop it on its back from about 4 ft in the air. Hit the dirt parking lot, everyone that wasn't paying attention to the conversation gasped as they thought i had accidently dropped my shiny new toy.
I picked it up, inspected it, there weren't even any marks on the exoskeleton part. Dusted off the silicone and snapped it back in my holster, everything was fine.
Overall, fairly impressed by the protection it affords.

lacrossev said:
Went out with my friends yesterday, showed one of them the rugged case, he looked at it and goes: "throw it" I was confident in the case but not the screen, so i decided to drop it on its back from about 4 ft in the air. Hit the dirt parking lot, everyone that wasn't paying attention to the conversation gasped as they thought i had accidently dropped my shiny new toy.
I picked it up, inspected it, there weren't even any marks on the exoskeleton part. Dusted off the silicone and snapped it back in my holster, everything was fine.
Overall, fairly impressed by the protection it affords.
Click to expand...
Click to collapse
Next time man up and throw it.

[Q] Innocase for Droid 2 - "Now shipping"

According to Seidio's online store their Innocase is now shipping. Innocase is well reviewed for other phones. Anyone have comments on their new Droid 2 version?

Otterbox is coming out with one soon, its posted on the website. I'm excited for that. I honestly prefer Otterbox over Innocase.

kwheel596 said:
Otterbox is coming out with one soon, its posted on the website. I'm excited for that. I honestly prefer Otterbox over Innocase.
Click to expand...
Click to collapse
Was gonna buy the seidio, till I saw the otterbox case... now I don't know which to get

Innocase on the way
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.

oldcyberdude said:
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
Click to expand...
Click to collapse
yeah, I tried one of the verizon OEM cases, and it definitly hindered the opening of the keyboard, and the top row. Enough so that I have serious doubts about whether any case will not have this problem.
Also I've had the misfortune to already drop my phone (albeit short drop), and whatever the material that surrounds the screen is EXTREMELY brittle, and shattered off a fair number of chunks.
That being said, I think I'll probably just wait on a case until perhaps my phone starts "having lots of problems" a week or so before the warranty is up and I have to get a replacement one.

oldcyberdude said:
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
Click to expand...
Click to collapse
Let us know if it fits the OEM multimedia cradle please (if you have one).. I'm dying for a good case that fits the cradle and doesn't hinder the keyboard like most of the hard shell ones i've tried (including the VZW and some cheapo ebay one)....

Lithoss said:
Let us know if it fits the OEM multimedia cradle please (if you have one).. I'm dying for a good case that fits the cradle and doesn't hinder the keyboard like most of the hard shell ones i've tried (including the VZW and some cheapo ebay one)....
Click to expand...
Click to collapse
It does not fit the cradle--between me and my 2 coworkers we have been thou 6 or so different cases and this is def the best one so far. No interference with the keyboard slide either, if the case was any thinner it would fall apart.

Nightrage said:
It does not fit the cradle--between me and my 2 coworkers we have been thou 6 or so different cases and this is def the best one so far. No interference with the keyboard slide either, if the case was any thinner it would fall apart.
Click to expand...
Click to collapse
Hmmm. That stinks it doesnt fit. Sounds like a very good case though.
I may have to take my dremel to the cradle

Assessment of the Seidio Innocase
I bought my Innocase via Seidio on-line store. The process was easy and shipped the same day via FedEx. I purchased the combo of the case and holster. However, Henry Ford must have been the design consultant for the D2 case. Unlike cases for the iPhone, you can have any color as long as it’s black. My wife reports that this is so BORING!
The case is made of a polycarbonate that is coated with a thin non-slip rubber-like material to improve gripping the phone. The case is only about 1/16 inch thick. The Innocase comes in 2 pieces that attach to the lower (sliding) and upper (display) portions of the phone with very small tabs that grip the edges. Though very small, these tabs secure the case well. Installation is a snap . I can report that the Innocase does not interfere with sliding mechanism in any way. Cutouts are provided for all phone items such as power connector, headphone jack, microphone, speaker, volume control, camera, power switch etc. The case does remove easily for access to the battery/ microSd.
Regarding operation of the slide out keyboard; I have found no difficulties. The D2 (without case) has less than 1/8 inch space above the top row of keys. The Innocase uses a minimum amount of this space. I found that even with my fat thumbs I had no difficulty (i.e. no missed or erroneous key presses) using the upper row of keys. In fact if I slipped my thumb up against the edge of the case I was positioned right over the top row keys.
Seidio has 2 holsters available; non-cased devices and Innocase devices. I have the Innocase holster. The holster is well built and provides a secure belt attachment. The belt clip swivels allowing vertical, 45-degree or horizontal carrying of the phone. To secure the phone you slip it in on the bottom and snap the clip on the top. The top clip is offset so it does not interfere with headset & power switch if you clip in with the screen facing in. The inward facing screen is recommended to reduce screen scratch risks. The holster is felt lined to protect the screen.
In summary I am very happy with the Innocase and belt holster. They are well designed and constructed. I recommend them for anyone with a Droid 2.
I do not own a cradle. I notice Seidio has a cradle for the Droid that works with Innocase. I would call them and see if the same cradle will work with the D2 & Innocase.

Thanks for the reviews. Sounds like the best case out there for sure.
Would you mind posting some pictures when you get a chance please? The pics on the seidio site are pretty weak. thanks!

Case and holster photos
Not much to look at
Case back shows cutouts for camera, speaker and USB power. Dull black exterior finish. Case front (not shown) is even less to look at, just a big cut for the screen.
Case tab picture shows a close up of the small tab that clicks onto the phone to secure the case. 4 places on both back and front halves. The shining finish evident in this photo is the interior of the case.
Holster picture shows the support for the bottom of the phone (on left of photo). The clip on the right secures the top of the phone and allows easy removal. On the bottom of the photo is the belt clip.
Hope these help.

I bought the Seidio surface case after finding the el-cheapo snap-on case I bought from an Amazon marketplace seller to be too bulky. The Seidio is no less bulky and was not even as well designed as the cheapo one (which afforded better access to the bottom row of soft buttons). I returned it to Seidio (out my $5 shipping, which was more than the entire cost of the cheapo one), and think it's unconscionable that they charge $30 for these two bits of plastic.
BTW, I have since tried one of the soft gel style cases for the A955 that they sell on ebay -- the kind with the "track slider" that keeps the two gell halves together (sort of like a ziplock plactic channel). This contraption was a completely useless mess, which fortunately only set me back $3 including shipping.
Ultimately, I think the D2 is a relatively thick device that really cannot accomodate a case without becoming way too thick. Thankfully, I've come to realize that it doesn't need a case - it already has Gorilla class and a rubberized back. Why bother with more? Mine's been dropped a few times with no signs of the drop at all except to the chrome paint around the edges, which flakes off easily.

Do you have a pic with it on the phone?

[Review] PDair Horizontal Pouch for HTC One X

I got my PDair horizontal pouch for my HOX. Love it!
First of all, in my opinion, carrying phone in a pouch on your belt is the best place for it - it's safe, accessible, and there's no need for ugly cases.
Pics are below. Here are some points:
Perfect quality - no defects at all, these guys know how to manufacture quality stuff. I could easily lie that this case costs $80+ if I wanted to =)
100% Natural leather
Coushioned both outside and inside, real pleasant to touch
PERFECT fit for HOX - case was designed from scratch I guess, since it fits so damn well.
Sides have stretchy inserts for ease of access
Inside is made with wrinkled leather - soft and won't leave any residue on the phone.
All corners are covered (!), almost no chance of nicking a corner of your HOX over a table or something
Magnet clip, easily attaches and detaches.
Bottom cut-out, to make it easy to remove the phone quickly
Belt clip is VERY solid. It's full metal wrapped in leather, attached with metal stud. Attached very firmly.
Sown with white thread, looks very cool.
Inexpensive - $29 USD (no tax, free shipping) on their website. Took 2 weeks to deliver though.
Comes in a gift box, wrapped in tissue paper, like a freaking birthday gift. Yeah, seriously.
I highly recommend it. Ditch your plastic cases, just get this - your phone will be safe, and.. naked!
Pics:

Cellet Bergamo Case

Here is the case I just got that fits well.
Cellet Bergamo Leather Case Holster
I already had an old holster from a previous phone that worked fine but I wanted just a pouch with no belt clip to slip in my pocket. This one has the the removable clip and the back is then completely flat which was perfect for me. I was using a $3 ebay slip in pouch for 4 months which is extremely thin but I wanted something just a tad thicker for the occasional drop.
I have had this only a few days but it is a snug fit which I like but it will loosen up a little based on past experience. One other note if you do get this and like the belt clip feature this one does not swivel but I think they sell replacements for this brand that might have other option.
I keep my phone naked and I do not think you could fit the phone in this case with a skin or anything else on it.

Anyone tried PDair pouch?

I Can not decide what case to choose, SENA one, but it's to thin and I hate the leather pattern, or go for good ol' PDair,
they have than one http://www.pdair.com/index.php/leat...nexus-gt-i9250-vertical-pouch-type-black.html with multiple stitching color to chose from.
I asked them what the inner side part is made of, and they told me
"Thanks for your enquiry. ALL our Genuine PDair Leather Case is made of Premium Korea Cowhide leather and inner part is pvc. The inner part is a little hard to support the case but won’t get scratchiness on the phone."
Now PVC can also mean vinyl, maybe they mean it's hard to bend but soft to touch? anyway post your answers, still think to go with PDair as the shipping is free, SENA wat's 30$ to ship to Israel and it's ridiculously pricier, LOL not that I'm one to complain, as I ordered some acessories from EXPANSYS UK (extended battery w/cover, and desktop multimedia dock for my GNEX, but they was cheaper back then in comparison to eBay):silly:

I have the same PDair version, but with a belt clip. It protects the screen just fine, in fact that is what I bought it for. It's not slim, but its the only thing I put in that pocket. For the times i'm not wearing business clothes (often) I clip the clip on the edge of my pocket, so the pouch sits inside my pocket, and the clip keeps it towards the top of the pocket. It also keeps the phones screen safe when i'm not keeping it in my pocket and throw it on a table or counter somewhere. It'll protect it from a lot of drops, but nowhere's near as effective of otterbox style cases.

BBruin66 said:
I have the same PDair version, but with a belt clip. It protects the screen just fine, in fact that is what I bought it for. It's not slim, but its the only thing I put in that pocket. For the times i'm not wearing business clothes (often) I clip the clip on the edge of my pocket, so the pouch sits inside my pocket, and the clip keeps it towards the top of the pocket. It also keeps the phones screen safe when i'm not keeping it in my pocket and throw it on a table or counter somewhere. It'll protect it from a lot of drops, but nowhere's near as effective of otterbox style cases.
Click to expand...
Click to collapse
Can you show me some photos? also do you maybe use extended battery? the thing is, that I want to make a pair, buy same type of case for both my Galaxy Nexus and my Nexus 7, I currently use SGP Crumena for the GNEX.
if you compare SENA, SGP and PDair, the last one is different, it not protect all the sides as the other.
on other hand the SENA vs PDair for N7 is that they do protect all sides