Related
im trying to get an internet connection through my wifi connection. i have done search's and lots of people seem to be asking the same question but nobody has the answer.
at the moment i can access my c: using an application called Resco explorer. but i can not connect to the internet. im not sure what setting i should have on the wifi manger and on my pc. im also using AOL as my isp.
PLS PLS help :lol:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
looks like a no then
I got mine working but setting my wireless network adapter to connect to "Work".
Under Settings>Connections>Tasks>Manage existing connections>Proxy Settings> check the "This network connects to the internet" box
then
Under Settings>Connections>Advanced>Select Networks> "Programs that automatically connect to the internet should connect using:" to "My Work Network" (and the same with one for private network)
Also in your active sync settings, make sure your connection settings allow network (Ethernet) and RAS connections.
From previous research around this, i'm pretty sure you can only use the internet pass through under "WORK" settings only.
*thought i'd better register and contribute as i've gained a fair bit from this forum.
no good anyother ideas. i have searched through hundreds of threads and still no go
help pls
Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings.
i have done this on both my wifi network and my isp network.
still not working
Have you checked if you're getting an IP address from your Wireless Router's DHCP server? Also DNS settings and Gateway address should be there.
You can check this easily by using vxUtil (free )
these are my settings:
tiacxwln1 - tiacxwln compatible wireless
Ip address 192.168.0.2
subnet mask 255.255.255.0
default gateway 192.168.0.1
primary DNS 192.168.0.1
secondary dns
primary wins
seconfdary wins
DHCPs server 192.168.0.1
under serial usb
IP address 192.168.55.101
subnet mask 255.255.255.0
default gateway 192.168.55.100
primary DNS 127.0.0.1
Getting this error when I tried to allow my broadband connection to share with my wifi connection. If I unplug the wifi connection and try and share with another network I don’t get any errors.
Internet connection sharing (ics) cannot be enabled due to IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1 please ensure that no other client on the network is configured to use 192.168.0.1
hmmm ... ever had the same problem. all devices are able to connect to the same router except mine sx66.
then i change the router's channel to '1' .. tada .. now everyone is connected. it might sounds silly, but it worked for me.
try changing your ap wireless channel.
Re: does NE1 have the answer to wifi not connecting to the n
robboy said:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
Click to expand...
Click to collapse
i found the problem with activesync 3.8 and 4.0 somehow, so i reverted back to 3.7, now wifi can sync.
afaik, connecting to internet has nothing to do with activesync. its a direct connection to wifi router. use work location and check the proxy settings if u hv any? (at home i use connect to internet without proxy, at work i use connect to internet with proxy).
Also, for Activsync with wifi, make sure that the WINS server address is that of yr PC u want to sync with.
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
at my school, in order to use the wifi connection, you have to log in with your username and password(not like wireless password wep,wpa etc ). I can find and connect to the wifi but it will not work when i try surfing the web as i cannot seem to be able to enter in my username and password.
does anyone know of how to help me?
jopherr said:
at my school, in order to use the wifi connection, you have to log in with your username and password(not like wireless password wep,wpa etc ). I can find and connect to the wifi but it will not work when i try surfing the web as i cannot seem to be able to enter in my username and password.
does anyone know of how to help me?
Click to expand...
Click to collapse
that is probably your proxy server asking for user/password to let you out...
oh whoops i didnt state my problem.
i do not know where to be able to enter in this information to be able to access the internet.
certificates?
other things?
im not sure.
how do i enter in for certificate?
well, what do you have to do if you were to connect to your school's wifi with a laptop?
At my university, once you connect to the wifi and try to access a page it re-directs you to a page where you must login with your school assigned username and password. Once logged in I can surf just fine. I only use it in lecture halls that have no reception.
fone_fanatic said:
well, what do you have to do if you were to connect to your school's wifi with a laptop?
At my university, once you connect to the wifi and try to access a page it re-directs you to a page where you must login with your school assigned username and password. Once logged in I can surf just fine. I only use it in lecture halls that have no reception.
Click to expand...
Click to collapse
oh im not really sure i havent tried.
on tuesday i shall try it and come back
jopherr said:
at my school, in order to use the wifi connection, you have to log in with your username and password(not like wireless password wep,wpa etc ). I can find and connect to the wifi but it will not work when i try surfing the web as i cannot seem to be able to enter in my username and password.
does anyone know of how to help me?
Click to expand...
Click to collapse
Your school's proxy likely authenticates through Active Directory - which isn't, as far as I know, used in Windows Mobile (at least in any practical fashion). In an enterprise wireless environment, even a laptop may have to be plugged in via CAT5 cable first to obtain the proper certificate (something that isn't quite compatible with a mobile phone) - after that, it can authenticate on the wireless network. For this reason, some enterprise wireless networks offer a guest account with limited, more controlled acccess to the school's local network but it may, at the very least, give you access to the internet.
Sorry this isn't of much help, but it at least clarifies why you may not be able to access the internet. I did see this same question come up on the Experts Exchange website but they charge you to see the answer.
okay so i tried to connect to the wireless network on my laptop. it "connects" fine and dandy. What I mean is that the "connected" icon shows up. But the message that prompts me to enter in my username and password pops up after i open my web browser (firefox/chrome etc)
on my friends iphone. same thing. the popup shows up after you open up safari mobile.
is there really no way around this?
Are you using Opera or IE?
Opera in turbo mode will not let you authenticate.
Joe USer said:
Are you using Opera or IE?
Opera in turbo mode will not let you authenticate.
Click to expand...
Click to collapse
let me try it tommorow without turbo mode.
jopherr said:
let me try it tommorow without turbo mode.
Click to expand...
Click to collapse
Or just try it in Pocket Internet Explorer, Log in, then switch over to Opera.
fone_fanatic said:
Or just try it in Pocket Internet Explorer, Log in, then switch over to Opera.
Click to expand...
Click to collapse
ok i tried it today when i ran pie, there was no popup or prompt for me to sign in. neither was it there when i used opera w/o turbo.
anyother suggestions?
I have created a new Windows Mobile application to wake up hosts in a network or over the Internet. Your networkcard and/or PC must support AMD's Wake-On-Lan (WOL), most networkcards and PC's do support this nowadays.
Features
Use Win32 Sense SDK.
Sources files available!
Stores hostname, MAC address and port number using registry.
Wakes up a host in a local area network (LAN) or in a remote area network (WAN)
Support for all screen resolutions
Requirements
A Windows Mobile 6 Smartphone or PocketPC device with access to WAN (wifi/3G/GPRS...)
Computers in your network that support Wake-On-Lan
Change log
V1.3
Uses the latest Manila's SDK V1.3 which improve speed and landscape compatibility
Correct a bug when using WIFI
Add some informations (IP of device & resolved host)
"
Hi,
anything like it exist already.
http://forum.xda-developers.com/showthread.php?t=695524
with friendly greet
starbase64
Thank you, I hadn't seen this program before... However, there are some differences as the use of the win32 SDK and the availability of sources.
I hope someone will find the sources usefull
I really need this.. and have no idea what to do. unfortunately, i can't forward a port for a broadcast address in my LinkSys WRT160N.
anyone knows how to set this up?
Set up LinkSys
Hi,
Try to setup your router without the broadcast, sometimes it works... For example, if your PC's IP is 192.168.0.10 and your extern LinkSys's IP is 80.32.3.4, try to set up your router like this :
UDP forwarding:
in port: 12345 for example (you can use any number below 65535)
out IP: 192.168.0.10
out port: 9 (or 7 depands of your hardware)
Then in my app, the host IP will be 80.32.3.4 and the port 12345...
I hope it will be OK...
which app works best?? because there is 2 of these circling around these forums.. and i'm going to use the best one... which is more user friendly? and has the least amount of router input work?? either that... or will the op be so kind and kinda hold my hand and walk me through it via PM?? i will gladly sport your appication
The other application can save the configuration of multiple computers while mine only records one...
Also, mine is not based on dotNET so is slightly faster...
@nir36:
You could also try to use a smaller subnet/range. My router won't allow to forward a port to 192.168.0.255, but I changed the subnet mask to 255.255.255.224 and so the range is from 192.168.0.1 to 192.168.0.30 with 192.168.0.31 being the broadcast address for that range and which I can forward the needed port to.
You can use a subnet calculator if you need more or different IP addresses (do a search for subnet masks on google)
@ProjektFuze:
Least router input work ?? You have to setup your router/computer the same, the program just takes the public IP address, MAC address and port and sends a packet which is the same for both.
I would say WOL everywhere is more complete but this app here is more straightforward if you need it for only one computer...
Thanks for sharing!
Hi, great App and it suits my need perfectly! Almost...
I cant get it to work over GPRS/3G, only on Wifi!
Is that how it should work or do i have wrong settings somewhere, cant find any settings!
Thanks
/Andreas
Pain123 said:
Hi, great App and it suits my need perfectly! Almost...
I cant get it to work over GPRS/3G, only on Wifi!
Is that how it should work or do i have wrong settings somewhere, cant find any settings!
Thanks
/Andreas
Click to expand...
Click to collapse
It should work with 3G... It's probably a router problem !
When using 3g, the IP you set in my app must be a public IP (not 192.168.X.X) and if you have a router, you should tell him to route the packet to your local IP...
If you don't understand (English is not my native language), tell me more about your problem.
Hi!
It is not a router problem, my HD2 cannot even connect to internet in the program, and by an app in android it works perfectly so it is not in my router or computer... Can it by some issue with my rom?
Artemis 31,5
WM 6.5 23576.5.5.0
Manila 2.5.20183025.0
Radio 2.10.50.26
/Andreas
Strange...
When you are allready connected to internet, is the button enabled ?
I have a friend which have an HD2, I will try with his device and post here tomorow... Maybe another application prevents the connection...
I've tested my app on the HD2, and no problems...
My app should show your IP when connection is found. Try to:
-unconnect from 3G and launch wakeonwan. My app will normally trying to connect using 3G. Is this step OK?
-Connect your phone and launch wakeonwan. My app will normally trying to find your IP. Is this step OK?
No, neither works! It only say "Cant connect to internet"! It´s only on Wifi it connects... :-S
Ok, I will try to change the connection process and update it...
To understand the problem, what is the real message printed ?
Can't establish connection to web...
Can't find web connections...
Can't retrieve available connections...
Can't find your IP address...
An other question: is the app searching for a connection or the message is directly printed?
Thank's
Ok, can you try this version ?
remplace the old .exe with this version in /program files/WakeOnWan/
It´s the first one, Can't establish connection to web.
And i will try out the file you posted...
Pain123 said:
It´s the first one, Can't establish connection to web.
And i will try out the file you posted...
Click to expand...
Click to collapse
OK, I'm waiting for feedback
Exclamation VPN problem
hi all. I'm living in a country where nearly all sites (even facebook, youtube, twitter, friendfeed ...) have been filtered and we can not access them without vpn.
I use vpn on my pc and there is no problem using it but I can't have it on my ppc.
I setup everything in detail but when I try to connect I get the username/pass error which says:
VPN server problem. Verify your username and password, and try again. If the problem continues, turn the device off and try again
I've asked my vpn provider for mobile compatible IP and he has given me so, which he says works fine for iphone users. but I still have problem connecting to.
Click to expand...
Click to collapse
here are the info of the vpn I use:
server ip : us.parsns.co.cc
pars.services: VPN Type : L2TP
pars.services: key ya secret : r3102030a10
user: parsservice
pass: test
Click to expand...
Click to collapse
can anybody help please?
The name pings as 173.236.83.117, have you tried putting this in instead of the full name? also have you put the name/ip adress in your exceptions list? I believe you will need to!