Hi just wanted to know I I can just flash a rooted glide kernel like the i896 in Canada to root or do I have to flash a whole rom thanks. Its my wife's phone and she doesn't want me too mess with it but I will
I only want to remove att crap
Thanks
Sent from my Samsung Captivate I897
tonyzz said:
Hi just wanted to know I I can just flash a rooted glide kernel like the i896 in Canada to root or do I have to flash a whole rom thanks. Its my wife's phone and she doesn't want me too mess with it but I will
I only want to remove att crap
Thanks
Sent from my Samsung Captivate I897
Click to expand...
Click to collapse
here are the threads you can look at....some of the kernel (root) are not fully tested for we lack testers and please report back if you rooted successfully.
utkanos' stock root kernel
ardatdat's 1.2ghz OC kernel, root plus init.d support. Please note that you must have CWM Recovery to flash ardatdat's kernel
sakindia123's 1.3ghz Kernel with UV
unless otherwise mentioned, those kernels are flashed using Odin..
Give them thanks......and it would be appreciated if you report. Some testers like me already flashed a pre-rooted ROM before these root kernels. Although it works, we need to test it on fresh and un-rooted devices.
Thanks will try later when she is jot using her phone and report back
Sent from my Samsung Captivate I897
tonyzz said:
Thanks will try later when she is jot using her phone and report back
Sent from my Samsung Captivate I897
Click to expand...
Click to collapse
I successfully got root with a stock ROM by flashing ardatdat's kernel via CWM.
http://forum.xda-developers.com/showthread.php?t=1468626
vil33 said:
I successfully got root with a stock ROM by flashing ardatdat's kernel via CWM.
http://forum.xda-developers.com/showthread.php?t=1468626
Click to expand...
Click to collapse
Thanks but how do I get CWM on the phone to flash it with CWM with my cappy I had to flash a rooted kernel then cwm or using from manager to install it. If you have a link to installing CWM on non rooted kernel please let me know
Thanks
I use Ubuntu as my os so I have to use heimdall which works great on my captivate
Sent from my Samsung Captivate I897
tonyzz said:
Thanks but how do I get CWM on the phone to flash it with CWM with my cappy I had to flash a rooted kernel then cwm or using from manager to install it. If you have a link to installing CWM on non rooted kernel please let me know
Thanks
I use Ubuntu as my os so I have to use heimdall which works great on my captivate
Sent from my Samsung Captivate I897
Click to expand...
Click to collapse
should be on my first post on this thread....
Thanks read too fast didn't see cwm link
Sent from my Samsung Captivate I897
If I want to try one of the rooted kernels, but then I decide to go back to non-rooted stock, what would I do? Should I do a nandroid backup? Does a restore from a nandroid backup let you restore just the kernel? Will that go back to being non-rooted?
gattman said:
If I want to try one of the rooted kernels, but then I decide to go back to non-rooted stock, what would I do? Should I do a nandroid backup? Does a restore from a nandroid backup let you restore just the kernel? Will that go back to being non-rooted?
Click to expand...
Click to collapse
Yes if you do a backup before you root , you should go back to stock if you restore or you can flash the stock kernel via CWM.
Related
Could some kind person possibly back up and upload their stock rooted Rogers ROM and the CIQ-free rogers kernel in a CWM flashable format? I'm having some issues with a custom ROM, and I don't actually own a Windows PC to use ODIN to flash back to the the rooted rogers rom in the 'How to root your captivate glide' thread, so I'd really like to be able to use CWM to get back to stock to see if the issue is my phone, my kernel, or the rom.
Edit: I tried Heimdall, but it just constantly 'Fails to initialise protocol!' on me, so that's a no go.
purple.epod said:
Could some kind person possibly back up and upload their stock rooted Rogers ROM and the CIQ-free rogers kernel in a CWM flashable format? I'm having some issues with a custom ROM, and I don't actually own a Windows PC to use ODIN to flash back to the the rooted rogers rom in the 'How to root your captivate glide' thread, so I'd really like to be able to use CWM to get back to stock to see if the issue is my phone, my kernel, or the rom.
Edit: I tried Heimdall, but it just constantly 'Fails to initialise protocol!' on me, so that's a no go.
Click to expand...
Click to collapse
i second this request, im fortunate to have odin to flash the rooted stock rom CarpeNoctum provided but a CWM-Recovery version so we can do this on the fly
Hey fellas just moved to this section from the Inc s since I sold that phone and what a nice phone it was.So I got the Samsung glide and thanks to all the people here I rooted and installed the cwm and now I am ready to get my hands on a nice custom rom.
So now I am gonna backup my Rogers Samsung glide and upload it somewhere for the peeps above who where requesting it.
So keep an eye om this post for the download links.
Ok so I backed up my stock rooted rom and there is more than on file in there so someone tell me if I should upload all of them or just certain ones.
And also where is better to upload files by the way cause I have not done it in a while.
Cheers!
Edit:
Here is a link to my backed up stock rooted Rogers 2.3.5 rom.
http://ge.tt/9baDP9D?c
Hi all,
I backed up my stock rom with cwm before installing CM9. In galaxy nexus and sII forums people get back successfully to stock rom. I don't know is it also works good with Arc lt15i. If it is what should i do to get my stock ROM back?
Thank you.
Hi,
Your best way to is flash an ftf and then go into cwm and restore your latest backup of your stock ROM. You can pick up just where you left off
Jon565G said:
Hi,
Your best way to is flash an ftf and then go into cwm and restore your latest backup of your stock ROM. You can pick up just where you left off
Click to expand...
Click to collapse
So CWM cannot install stock rom. I have to flash a ftf.
namcojoulder said:
So CWM cannot install stock rom. I have to flash a ftf.
Click to expand...
Click to collapse
As far as I know yes.
Cwm will backup and restore.
You can use cwm to install mods, Roms etc if they are flashable zips,ie not ftf files.
Sent from my LT18i using xda premium
Hey everyone.
Wondering if anyone can shed some light..
I am currently rooted and using CWM for my recovery and AOKP for my ROM...
i found a thread here that has all the STOCK roms and kernals for Samsung S3.
My question is simple really..
When i flash back to the STOCK ROM and STOCK KERNAL.. would i lose my ROOT? and would i also lose Clockwork recovery?
Thanks
Diamond22 said:
Hey everyone.
Wondering if anyone can shed some light..
I am currently rooted and using CWM for my recovery and AOKP for my ROM...
i found a thread here that has all the STOCK roms and kernals for Samsung S3.
My question is simple really..
When i flash back to the STOCK ROM and STOCK KERNAL.. would i lose my ROOT? and would i also lose Clockwork recovery?
Thanks
Click to expand...
Click to collapse
If you just use mskip's toolkit from the dev section, you can flash back to a stock rom and if you want/need to, you can also flash root and recovery from his tool as well after flashing back to stock.
evodon84 said:
If you just use mskip's toolkit from the dev section, you can flash back to a stock rom and if you want/need to, you can also flash root and recovery from his tool as well after flashing back to stock.
Click to expand...
Click to collapse
Long answer for "Yes" and "Yes"
Sent from my SAMSUNG-SGH-I747 using xda premium
Any link to the thread with the stock ROMs? I am no good at searching for this stuff.
I'll post the link when I am at home for the stock ROMs..
These replies kinda confused me lol...
I don't want to use a toolkit..
I just want to flash the .zip ROM and kernel via CWM..if I do that do I loose my root and CWM?
Or do I need this mskip toolkit to accomplish this? Meaning get rid of root and CWM..
Thanks..sorry..just confuses by the responses..
I'll post the link when I am at home for the stock ROMs..
These replies kinda confused me lol...
I don't want to use a toolkit..
I just want to flash the .zip ROM and kernel via CWM..if I do that do I loose my root and CWM?
Or do I need this mskip toolkit to accomplish this? Meaning get rid of root and CWM..
Thanks..sorry..just confuses by the responses..
Looking for a safe root method without having to use CWM Recovery. I want to be able to keep stock recovery and be rooted just in case we get 4.2.2 anytime soon.
Azzair113 said:
Looking for a safe root method without having to use CWM Recovery. I want to be able to keep stock recovery and be rooted just in case we get 4.2.2 anytime soon.
Click to expand...
Click to collapse
Not possible, but you can flash stock recovery back after you've rooted successfully, you can find the root procedure and the stock recovery in the faq which can be found in my Sig. Also, when/if 4.2.2 dies come out, I can guarantee that a stock rooted build will be available before most get the actual ota anyways and you'll need a custom recovery for that, so just root and if the update comes out, flash the stock rooted build with cwm or twrp...
Sent from my ANTHRAX sniffing GS3
flastnoles11 said:
Not possible, but you can flash stock recovery back after you've rooted successfully, you can find the root procedure and the stock recovery in the faq which can be found in my Sig. Also, when/if 4.2.2 dies come out, I can giant that a stock rooted build wool be available before most get the actual ota anyways and you'll need a custom recovery for that, so just root and if the update comes out, flash the stock rooted build with cwm or twrp...
Sent from my ANTHRAX sniffing GS3
Click to expand...
Click to collapse
ok thanks will do...
flastnoles11 said:
Not possible, but you can flash stock recovery back after you've rooted successfully, you can find the root procedure and the stock recovery in the faq which can be found in my Sig. Also, when/if 4.2.2 dies come out, I can giant that a stock rooted build wool be available before most get the actual ota anyways and you'll need a custom recovery for that, so just root and if the update comes out, flash the stock rooted build with cwm or twrp...
Sent from my ANTHRAX sniffing GS3
Click to expand...
Click to collapse
If I flash the stock recovery in the cwmr will i need to factory reset or anything before i boot back up.
Azzair113 said:
If I flash the stock recovery in the cwmr will i need to factory reset or anything before i boot back up.
Click to expand...
Click to collapse
Nope
CNexus said:
Nope
Click to expand...
Click to collapse
Thanks for the help doing it right now...
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.