Hey guys im having a bit of an issue when trying to flash the official FCO6 Stock rom through odin. I have v1.85 and 1.87 and both show the same thing. I have the victory pit file and the SPH-D700-FC09-8GB-REL.TAR.MD5 file both on my desktop but when my phone is plugged in and ready to go, and I click PDA on odin and go to desktop, it isn't their. The victory file shows up and I place that In it's correct place but the md5 does not. No matter where I put it? anyone have any suggestions so I can odin my phone?
try erasing the .md5 part at the end
Try the phone slot instead.
Sent from my GT-P7510 using Tapatalk 2
Hey guys I have this exact same problem right now. My phone is in a bootloop so I am trying to odin back to stock but the FC09 file will not show up. I have tried removing the .md5 as well but that does not work either. I have tried deleting and re-downloading 3 times. I know the file is there 100% and I know I am looking in the right folder 100%.
edit: this is odin 1.87 and I have tried the phone slot with the same results.
edit #2: I am sure someone else will run into this problem someday since two of us have. Apparently this is the only file you will ever unzip. I have it so ground into my head to never unzip anything I didn't think of that
danipoak said:
Hey guys I have this exact same problem right now. My phone is in a bootloop so I am trying to odin back to stock but the FC09 file will not show up. I have tried removing the .md5 as well but that does not work either. I have tried deleting and re-downloading 3 times. I know the file is there 100% and I know I am looking in the right folder 100%.
edit: this is odin 1.87 and I have tried the phone slot with the same results.
edit #2: I am sure someone else will run into this problem someday since two of us have. Apparently this is the only file you will ever unzip. I have it so ground into my head to never unzip anything I didn't think of that
Click to expand...
Click to collapse
Try the updated version of Odin. http://db.tt/OIEtTUxn
Hi all,
So I got the txt message from AT&T about upgrade available.
So I opened Keis and let it update. (I have a whole seperate issue with Kies; it will only read my Glide about 10% of the time).
Once I FINALLY got it to connect to my phone, I began the update process. FAIL
fail, fail, fail, 4 hours of fail.
i've tried every recommendation from every post i';ve come across, including uninstalling keis, running reg cleaner, rebooting, reinstalling.
i've trie 3 diff version of the samsung usb driver program, whatever u search for on this forum and google, i've tried it.
The best I have gotten is for Kies to actually recognize my phone and begin the update process, a few times, I saw no progress bar on the phone and the Kies window stayed on 0%.
The first time I actually sw a progress bar on my phone, it moved about 1/8th of an inch and stopped. I left if overnight, and when I got up this morning, it was the same.
So again today, on a different computer, I created a new user profile and tried some more; nada.
So I'm so desperate for ICS on this phone, I tried using that one click release of the leaked ICS, same thing. several times of not recognizing the phone, then finally
the progress bar on the phone moved a little bit, so I left it for over an hour and it didn't move.
At least this time, I could see that it was hung on the bootloader part.
I've tried this on two diff Win7 x64 machines and an XP pro machine; all the same results.
interesting part:
Once last night, I kept my temp folder open while Kies was doing it's thing, and I grabbed this file:
https://docs.google.com/open?id=0B_Sgf7j8WktibEJ4NXVva08zYmM
(i couldn't find any free file share sites that would let me upload a file this big.)
This is the actual ROM (or whatever you would call it)
Kies downloaded a file and named it whatever.tmp, as soon as I saw it, I copied it and extracted the contents with uniextract - that is where I got this .tar file from.
So what can I do with this file to install ICS on my phone?
I did try renaming it update.zip and copying it to my sdcard, I tried to "install update from sdcard", but I get an error about it not being signed.
For anyone who doesn't want to download a 600+MB file, this is what's inside it:
boot.img
cache.img
factoryfs.img
hidden.img
modem.bin
recovery.img
Not too sure if this belongs in development. It's a question, but the file is development purposes . Anyway you can use boot.img and a system dump of the official ICS to make a flashable zip, or theme some system apps, etc. The possibilites are endless
ericpeacock79 said:
Hi all,
So I got the txt message from AT&T about upgrade available.
So I opened Keis and let it update. (I have a whole seperate issue with Kies; it will only read my Glide about 10% of the time).
Once I FINALLY got it to connect to my phone, I began the update process. FAIL
fail, fail, fail, 4 hours of fail.
i've tried every recommendation from every post i';ve come across, including uninstalling keis, running reg cleaner, rebooting, reinstalling.
i've trie 3 diff version of the samsung usb driver program, whatever u search for on this forum and google, i've tried it.
The best I have gotten is for Kies to actually recognize my phone and begin the update process, a few times, I saw no progress bar on the phone and the Kies window stayed on 0%.
The first time I actually sw a progress bar on my phone, it moved about 1/8th of an inch and stopped. I left if overnight, and when I got up this morning, it was the same.
So again today, on a different computer, I created a new user profile and tried some more; nada.
So I'm so desperate for ICS on this phone, I tried using that one click release of the leaked ICS, same thing. several times of not recognizing the phone, then finally
the progress bar on the phone moved a little bit, so I left it for over an hour and it didn't move.
At least this time, I could see that it was hung on the bootloader part.
I've tried this on two diff Win7 x64 machines and an XP pro machine; all the same results.
interesting part:
Once last night, I kept my temp folder open while Kies was doing it's thing, and I grabbed this file:
https://docs.google.com/open?id=0B_Sgf7j8WktibEJ4NXVva08zYmM
(i couldn't find any free file share sites that would let me upload a file this big.)
This is the actual ROM (or whatever you would call it)
Kies downloaded a file and named it whatever.tmp, as soon as I saw it, I copied it and extracted the contents with uniextract - that is where I got this .tar file from.
So what can I do with this file to install ICS on my phone?
I did try renaming it update.zip and copying it to my sdcard, I tried to "install update from sdcard", but I get an error about it not being signed.
For anyone who doesn't want to download a 600+MB file, this is what's inside it:
boot.img
cache.img
factoryfs.img
hidden.img
modem.bin
recovery.img
Click to expand...
Click to collapse
You should be able to flash that with ODIN
Fact, this is the same file I downloaded from http://www.hotfile.com/dl/170800037/7fd1f5e/I927UCLH2_I927ATTLH2_ATT.zip.html
Worked flashing with ODIN on a unlocked Rogers I927R
enewman17 said:
You should be able to flash that with ODIN
Fact, this is the same file I downloaded from http://www.hotfile.com/dl/170800037/7fd1f5e/I927UCLH2_I927ATTLH2_ATT.zip.html
Worked flashing with ODIN on a unlocked Rogers I927R
Click to expand...
Click to collapse
groovy!!
so... what do i do in odin?
i've got it downloaded, but which option, etc do i need to select?
ericpeacock79 said:
groovy!!
so... what do i do in odin?
i've got it downloaded, but which option, etc do i need to select?
Click to expand...
Click to collapse
Power Phone into DOWNLOAD MODE, Pressing POWER and VOLUME UP till it boots
Using ODIN 1.85
wait for phone to appear
Uncheck F. Reset Time (only AUTO REBOOT should be checked)
Check the box next to PDA
using the PDA button select the .tar file
Press start, sit back and drink a beer
Then apply CWM I prefer 5.0.27 "EXACTLY THE SAME WAY AS YOU INSTALLED THE ROM WITH ODIN" http://forum.xda-developers.com/showthread.php?t=1458153 (it's not touch, but it keeps backups in img form rather than the .blob like CWM6. just make's it easier to handle backups.
In CWM "If you want root", apply http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
In CWM apply the LH2 Keyboard backlight fix http://forum.xda-developers.com/showthread.php?t=1848433
Its running pretty smooth so far, no major issues to report: but I had the camera giving me issues till I cleared data form the app. still gave a few stutters then the whole phone started running well after a few reboots and some settling time.
enewman17 said:
Power Phone into DOWNLOAD MODE, Pressing POWER and VOLUME UP till it boots
Using ODIN 1.85
wait for phone to appear
Uncheck F. Reset Time (only AUTO REBOOT should be checked)
Check the box next to PDA
using the PDA button select the .tar file
Press start, sit back and drink a beer
Then apply CWM I prefer 5.0.27 "EXACTLY THE SAME WAY AS YOU INSTALLED THE ROM WITH ODIN" http://dl.dropbox.com/u/9459955/recovery/testing/SGHI927R/v2/CWMR5x_i927_recovery.tar.md5 (it's not touch, but it keeps backups in img form rather than the .blob like CWM6. just make's it easier to handle backups.
In CWM "If you want root", apply http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
In CWM apply the LH2 Keyboard backlight fix http://forum.xda-developers.com/showthread.php?t=1848433
Its running pretty smooth so far, no major issues to report: but I had the camera giving me issues till I cleared data form the app. still gave a few stutters then the whole phone started running well after a few reboots and some settling time.
Click to expand...
Click to collapse
Thanks for you replies. I appreciate it very much.
(here's something weird, when viewing post in thread, it stops after the word beer. I didn't see the other stuff until I clicked reply :-/ )
unfortunately, it's doing the same thing as before... ODIN is stuck on boot.img for about ten minutes now
any thoughts.... anyone?
I want ICS on this phone SO bad.
( would it be related to the fact that I substituted beer for southern comfort? )
A few posts up I posted a link to a download of the new update that is what I used It worked perfectly. Extract from the zip and you'll have a .tar.md5 file which just makes ODIN Check the md5 sum before flashing
Sent from my SGH-I927 ICS using xda premium
ericpeacock79 said:
Thanks for you replies. I appreciate it very much.
(here's something weird, when viewing post in thread, it stops after the word beer. I didn't see the other stuff until I clicked reply :-/ )
unfortunately, it's doing the same thing as before... ODIN is stuck on boot.img for about ten minutes now
any thoughts.... anyone?
I want ICS on this phone SO bad.
( would it be related to the fact that I substituted beer for southern comfort? )
Click to expand...
Click to collapse
I checked your files md5 sum to the .tar file I used, and they are the same cbd0c11c1aa578f6bcdb06099b5d3102 so you should be good to go flashing the .tar file you captured during the keis install. Maybe try flashing CWM first boot into it and format everything then try installing the rom via ODIN. Try a new cable and/or make sure the phone is plugged into a usb plug in the rear of the computer.
enewman17 said:
A few posts up I posted a link to a download of the new update that is what I used It worked perfectly. Extract from the zip and you'll have a .tar.md5 file which just makes ODIN Check the md5 sum before flashing
Sent from my SGH-I927 ICS using xda premium
Click to expand...
Click to collapse
same thing with that one... stuck on boot.img in Odin, progress bar on phone moved about 1/8th of an inch.
i left it overnight again, i just now got up and see it's not moved....
that makes me a sad panda....
i guess next, i'll try to do this on ubuntu, using heimdall....
arrrgh.
ericpeacock79 said:
same thing with that one... stuck on boot.img in Odin, progress bar on phone moved about 1/8th of an inch.
i left it overnight again, i just now got up and see it's not moved....
that makes me a sad panda....
i guess next, i'll try to do this on ubuntu, using heimdall....
arrrgh.
Click to expand...
Click to collapse
That is a real bummer, I'm sorry it didn't work for you. It should only take a few minutes, I don't have any other ideas other than maybe try flashing the UCLG9 leak then re-trying to flash your tar file. The leak contains a new bootloader, I had flashed that a few weeks prior to the new update.
Also did you try flashing CWM with Odin just to see if it would flash seems like it's probably a computer problem rather then your phone.
Sent from my SGH-I927 using xda premium
Hello,
Sorry to 'thread-jack' but hopefully a minor annoyance.
Can someone post just the 'modem.bin' file from the I927UCLH2 update?
FYI, in hopes of enabling 3G/HSPA voice calling on Galaxy Tab 10.1..
Using European Tegra 2 based phone modem (from I9103), 2G voice calling works.
Trying to avoid downloading the entire .tar for one file =p
To clarify - European Tab 10.1 users are fine; AT&T and Rogers Tab 10.1 users can currently use 2G only.
T-Mobile - apparently 'their' phone counterpart uses a combo of 2 modem-related files?
But I digress... (don't think I can embed links yet) thread is in Tab 10.1 Dev forum.
Thank you!
enewman17 said:
That is a real bummer, I'm sorry it didn't work for you. It should only take a few minutes, I don't have any other ideas other than maybe try flashing the UCLG9 leak then re-trying to flash your tar file. The leak contains a new bootloader, I had flashed that a few weeks prior to the new update.
Also did you try flashing CWM with Odin just to see if it would flash seems like it's probably a computer problem rather then your phone.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
i did try flashing the CWM and it did the same thing stalling after about one second into it, same with UCLG9 leak one-click executable. (at least using that told me it was stuck on trying to flash the boot image)
I'm about to build a fresh win7 x86 VM with nothing but .net and VC++ runtime installed, to rule out both my living room and home office comps as the problem.
if it still don't work, the i'll build a fresh ubuntu VM and try it with heindall
Thank you, enewman17, for all your help. it is really appreciated. :good:
if it still don't work, i will call Samsung and demand a replacement phone.
spamam1:
modem.bin - 12,289KB
I used rom from 1st post and it's working flawless but is there any way to "super-duper" wipe this phone? after update I still have all my data, programs and even unlocked simlock. I will probably send it on warranty so I would like to have stock rom
edit: i think ICS is much slower than GB
timon12 said:
I used rom from 1st post and it's working flawless but is there any way to "super-duper" wipe this phone? after update I still have all my data, programs and even unlocked simlock. I will probably send it on warranty so I would like to have stock rom
edit: i think ICS is much slower than GB
Click to expand...
Click to collapse
Settings --> Back up and reset ---> Factory data Reset.....As it states this erases all data on the phone.
I'm getting it to boot up after cwmr but it hangs on the installing applications screen. Left it for an hour and still the same
are you kidding me?!?!
ARE YOU FREAKING KIDDING ME?!?!?!?!
ok, so here's what finally worked:
using a different USB cable that i found laying around.
for all of samsung's rhetoric about "only use the oem data cable" "never use anything but the oem data cable" "blah blah oem usb cable blah blah"
after trying this on like 6 different computers all with same results, i just found a usb cable laying around at work and decided to try it, just for the heck of it - IT DIDNT TAKE 5 MINUTES TO FLASH!
I AM NOW ICE CREAM SANDWICH!
seriously, FOUR days of banging my head on the wall, and it was the freaking OEM data cable that was the problem.
:silly::silly::silly::silly:
ericpeacock79 said:
are you kidding me?!?!
ARE YOU FREAKING KIDDING ME?!?!?!?!
ok, so here's what finally worked:
using a different USB cable that i found laying around.
for all of samsung's rhetoric about "only use the oem data cable" "never use anything but the oem data cable" "blah blah oem usb cable blah blah"
after trying this on like 6 different computers all with same results, i just found a usb cable laying around at work and decided to try it, just for the heck of it - IT DIDNT TAKE 5 MINUTES TO FLASH!
I AM NOW ICE CREAM SANDWICH!
seriously, FOUR days of banging my head on the wall, and it was the freaking OEM data cable that was the problem.
:silly::silly::silly::silly:
Click to expand...
Click to collapse
It's always something.... Haha
Glad it's working now.
Sent from my SGH-I927 using xda premium
ericpeacock79 said:
ok, so here's what finally worked:
using a different USB cable that i found laying around.
Click to expand...
Click to collapse
Same flash problem here, same exact solution. Flimsy micro-USB cable was the culprit. ODIN would get partially through and almost always fail during SetupConnection or Initialzation or NAND Write Start. Wasted about 12 hours testing a dozen possible causes. Changed to the thicker OEM cord and BAM!
Thanks!!
Funnny what a cable could do lol
Ok, so I attempted to download a couple of roms from this site, used Odin to install TWRP recovery. Problem is every rom I attempt to download is hosted from an incredibly slow site, so it takes 3 hours to download a single rom. I would like to return to stock, BONE STOCK. I remember with my Sprint Epic 4G I was able to download a tar/pit file that had the original modem and rom in 2 files: a PIT file, and a TAR File. Using Odin to flash this would return my phone to factory/bone stock configuration getting rid of all recovery/root/ect. I would like to know if there is such a file for the T-Mobile Samsung Galaxy S-2.
Anyone know?
My phone has been useless for the last 9 hours and every rom ive downloaded has not worked at all. (No Signal, No gapps, Not booting/black screen hang, ect)
I know I can download a similar app from HTC that will restore an HTC phone to stock settings, what about Samsung?
Also, does anyone know where I can download the latest ClockworkMod RECOVERY from so I can try to flash roms with that? I was thinking this TWRP recovery is the issue.
Thanks!
Have you read the stickies?
[HOWTO] ROOT, Install ClockworkMod Touch Recovery & get into Download Mode for newbie. It also has instructions for using Odin to get back to stock.
For the latest CWM...have you searched in the dev thread? Used Google/Bing?
blackangst said:
Have you read the stickies?
[HOWTO] ROOT, Install ClockworkMod Touch Recovery & get into Download Mode for newbie. It also has instructions for using Odin to get back to stock.
For the latest CWM...have you searched in the dev thread? Used Google/Bing?
Click to expand...
Click to collapse
I have read the stickies, in particular the one you attached. I also searched google (and bing, its still default on this pc) for the latest version of CWR, links I found are dead. Still didnt see anything in regards to what I asked specifically. Is there a way to restore, VIA ODIN, a STOCK ROM (PIT and TAR Files) similar to what was available with the older samsung Galaxy? I just downloaded the Jedi ROM and it actually booted with a signal, so Im giving it the "10 minutes" before I touch it. (Bummer everyone uses this wierd Dev Hosting site to host the files, download speeds of 37KB/sec are crazy slow with a 400+MB File).
I Thought about using Kies to restore to stock, not sure if thats even possible with a phone that has no rom installed since Ive never used Kies before. Guess I'll find out how well this rom works.
jasew503 said:
I have read the stickies, in particular the one you attached. I also searched google (and bing, its still default on this pc) for the latest version of CWR, links I found are dead. Still didnt see anything in regards to what I asked specifically. Is there a way to restore, VIA ODIN, a STOCK ROM (PIT and TAR Files) similar to what was available with the older samsung Galaxy? I just downloaded the Jedi ROM and it actually booted with a signal, so Im giving it the "10 minutes" before I touch it. (Bummer everyone uses this wierd Dev Hosting site to host the files, download speeds of 37KB/sec are crazy slow with a 400+MB File).
I Thought about using Kies to restore to stock, not sure if thats even possible with a phone that has no rom installed since Ive never used Kies before. Guess I'll find out how well this rom works.
Click to expand...
Click to collapse
Im not trying to be a **** but you couldnt have searched. If you followed the link for an Odin file in the page I linked earlier, it would have led you to THIS page which has a working download link for stock Odin (Gingerbread).
If you would have Googled exactly what you want, the 2nd result would give you the ICS download.
And Google also returns the main page for CWM
Hope that helps.
blackangst said:
Im not trying to be a **** but you couldnt have searched. If you followed the link for an Odin file in the page I linked earlier, it would have led you to THIS page which has a working download link for stock Odin (Gingerbread).
If you would have Googled exactly what you want, the 2nd result would give you the ICS download.
And Google also returns the main page for CWM
Hope that helps.
Click to expand...
Click to collapse
I dont think your trying to be a **** at all so its all good, id tell anyone the same thing, I did do several searches searches, but sifting through 900+ pages in one of hundreds of threads is a little daunting...
Also the link I believe your referring to (http://www.technoxide.com/2012/11/galaxy-s2-jelly-bean-4.1.2-I9100XXLSJ-update.html) <<No 2 in google results for a Samsung i9100 SGS2, I downloaded that one, installed it, had a black screen after the samsung logo and the phone started getting very hot after I let it sit for 15 mins or so. Tried rebooting several times, same thing.. The model number for mine is a SGH-T989, are they the same? I tried that link and followed its instructions anyways, and like I said, no go...
Thanks tho man I do appreciate it, all is well with the Jedi Rom, seems to be working awesome without the bloat.. (Just took 3.5 hrs to download from that janky hosting site its on.)
jasew503 said:
I dont think your trying to be a **** at all so its all good, id tell anyone the same thing, I did do several searches searches, but sifting through 900+ pages in one of hundreds of threads is a little daunting...
Also the link I believe your referring to (http://www.technoxide.com/2012/11/galaxy-s2-jelly-bean-4.1.2-I9100XXLSJ-update.html) <<No 2 in google results for a Samsung i9100 SGS2, I downloaded that one, installed it, had a black screen after the samsung logo and the phone started getting very hot after I let it sit for 15 mins or so. Tried rebooting several times, same thing.. The model number for mine is a SGH-T989, are they the same? I tried that link and followed its instructions anyways, and like I said, no go...
Thanks tho man I do appreciate it, all is well with the Jedi Rom, seems to be working awesome without the bloat.. (Just took 3.5 hrs to download from that janky hosting site its on.)
Click to expand...
Click to collapse
Erm...the 2nd result was THIS thread, and partway down the page is THIS link listed as "T-Mobile SGH-T989_UVLI4 (Stock Odin ROM)" on the page.
Glad Jedi is working for you.
edit: oh. You dont have a T989 looks like you have an I9100? Might poke around the I9100 forum to find your Odin image.
Hello all *waves*
This is my very first post although I have used this site countless times. I'm just going to jump right to it because I seriously need some help!
I am trying to fix my SGH-M919 (Tmobile S4) that just suddenly stopped working one day. I have tried EVERYTHING! Kies, custom roms, Odin but my phone still will not load past the Samsung logo. It will boot into recovery (TWRP) and Download mode. I know that using Kies is the quick fix but (LUCKY ME...not) my phone is one of the few phones tmobile/Samsung sent out with no S/N on the sticker under the battery. Since I cant get into my phone I cant get the S/N and I do not have the box anymore.
I have tried using the many sgh-m919 Stock Rom files online, including this site, but nothing is working. When I spend hours downloading them and begin to use them in odin, Odin doesn't load the file for me to flash.
I know I am using Odin correctly because I have done it successfully countless times in the past. I have also tried EVERY download file out there, but I can't find a good one that I can flash in Odin. I have also tried all of the guides on this site several times so please don't redirect me to them, because I have seriously and correctly tried them all. If you have any suggestion please let me know. I can't afford the 161.00 Samsung is requiring or the 175 warranty fee tmobile is charging. PLEASE HELP.
And if some has a good copy of the Stock Rom for SGH-M919 that they would be willing to email me I would FOREVER be greatful!
also my sdcard and battery are not the issue.... tried that too
Thanks,
Nikki
Were there any symptoms or anything you may have done out of the ordinary that might or might not have caused the problem? By saying that odin will not load files, is there an error message or what exactly do you mean by that? And what version odin are you using?
serio22 said:
Were there any symptoms or anything you may have done out of the ordinary that might or might not have caused the problem? By saying that odin will not load files, is there an error message or what exactly do you mean by that? And what version odin are you using?
Click to expand...
Click to collapse
I don't know if its something I have done wrong or not. I followed all of the instructions to the letter. I think (but am not sure) that I don't have a usable copy of the Stock Firmware.
I am using v3.10 but I have tried them all.
When I click on AP in Odin, then click on the file I am sent back to Odin, but the file (and filename) doesn't appear in the AP box like normal.
The stock firmware files take a while for odin to validate md5 check I think. Select your firmware file in Odin's selector, then wait a few mins for bit to process before giving up. This time lag surprised me first time I flashed stock firmware. Big file means longer wait!
Sent from my SGH-M919 using Tapatalk
Frankenscript said:
The stock firmware files take a while for odin to validate md5 check I think. Select your firmware file in Odin's selector, then wait a few mins for bit to process before giving up. This time lag surprised me first time I flashed stock firmware. Big file means longer wait!
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
The longest I have waited has been an hour, do you think that I should still wait longer?
Try different version of odin. Even if the file was bad, it would say something
Try a different pc.
Pp.
Sorry if I'm posting in the wrong forum here, but I wasn't sure where to start.
I got an ATT Note 8 unlocked running Nougat that would not come up on the Verizon network using my working SIM card. I had read that there were known issues with this and that an upgrade to oreo would fix things. Googling around I found an upgrade zip file from N950USQS2BQK2 to N950USQU2CQL1. I used the recovery method to upgrade from that file and at first things seems to be fine. I started having lots of issues with apps dying, eg Contacts, Phone and Bixby and started to wonder if perhaps the OS could be further upgraded. I hunted around and installed the samfirm tool and downloaded the file
SM-N950U_1_20181126150901_ouxwmh265r_fac.zip and extracted out all the parts. Using Odin (13.1) I tried to install this file but it got hung installing
system.img.ext4. Realizing that it would likely cause problems I powered off the phone after a couple of hours with no progress. As expected the phone was pretty pissed off when I tried to boot it up. It was stuck in trying to upload a crash file and took a lot of fiddling around to convince it to go back to download mode, thanks to one of the posts from this site I was able to make it work.
I've tried the same file again and it is stuck again at the same place. So the question is should I be using a different file? If at all possible I'd just like to run the standard Verizon load, in hunting around it seems for the latest Oreo I should use N950USQS5CRK1. but I can't figure out where to get that file in the format that Odin uses I've looked on the firmware.science website but have only come up with the zip version that would work with the recovery mode. Unfortunately with the state my phone is currently in I don't think I can get to recovery mode. It is in the endless upload mode, hitting the down & power button will shut it down but it comes right back to the upload screen. Any advice would be greatly appreciated. Sorry for the rambling post.
rphaddad said:
Sorry if I'm posting in the wrong forum here, but I wasn't sure where to start.
I got an ATT Note 8 unlocked running Nougat that would not come up on the Verizon network using my working SIM card. I had read that there were known issues with this and that an upgrade to oreo would fix things. Googling around I found an upgrade zip file from N950USQS2BQK2 to N950USQU2CQL1. I used the recovery method to upgrade from that file and at first things seems to be fine. I started having lots of issues with apps dying, eg Contacts, Phone and Bixby and started to wonder if perhaps the OS could be further upgraded. I hunted around and installed the samfirm tool and downloaded the file
SM-N950U_1_20181126150901_ouxwmh265r_fac.zip and extracted out all the parts. Using Odin (13.1) I tried to install this file but it got hung installing
system.img.ext4. Realizing that it would likely cause problems I powered off the phone after a couple of hours with no progress. As expected the phone was pretty pissed off when I tried to boot it up. It was stuck in trying to upload a crash file and took a lot of fiddling around to convince it to go back to download mode, thanks to one of the posts from this site I was able to make it work.
I've tried the same file again and it is stuck again at the same place. So the question is should I be using a different file? If at all possible I'd just like to run the standard Verizon load, in hunting around it seems for the latest Oreo I should use N950USQS5CRK1. but I can't figure out where to get that file in the format that Odin uses I've looked on the firmware.science website but have only come up with the zip version that would work with the recovery mode. Unfortunately with the state my phone is currently in I don't think I can get to recovery mode. It is in the endless upload mode, hitting the down & power button will shut it down but it comes right back to the upload screen. Any advice would be greatly appreciated. Sorry for the rambling post.
Click to expand...
Click to collapse
Download this odin firmware and FIRST extract it one time and the files for odin will be in the extracted folder and flash. You must flash AP, BL, CP and CSC all at the same time. Fill all the slots in odin.
https://androidfilehost.com/?fid=11410963190603879881
MrMike2182 said:
Download this odin firmware and FIRST extract it one time and the files for odin will be in the extracted folder and flash. You must flash AP, BL, CP and CSC all at the same time. Fill all the slots in odin.
Thanks for this. One question, I had the same issue the last time, there is a CSC and a HOME-CSC file included in the zip archive, which of these should be used with Odin?
thanks again
Click to expand...
Click to collapse
rphaddad said:
MrMike2182 said:
Download this odin firmware and FIRST extract it one time and the files for odin will be in the extracted folder and flash. You must flash AP, BL, CP and CSC all at the same time. Fill all the slots in odin.
Thanks for this. One question, I had the same issue the last time, there is a CSC and a HOME-CSC file included in the zip archive, which of these should be used with Odin?
thanks again
Click to expand...
Click to collapse
Never mind found that in another post.
thx
Click to expand...
Click to collapse
if I wanna odin without losing data I use home instead of CSC correct?
I would suggest also using Samsung Smart Switch before doing it. It gives you the option to back up pretty much your whole phone including just about all your apps, settings and customizations to an SD card. It also saves your custom icon groups too if you do that. The it makes it a breeze to restore after doing an Odin flash. It has helped save me a time or 2.
Eta: After rereading the OP, looks like you may not be able to use this as you need to be able to boot all the way up.
Right, I was not able to boot so smart connect isn't an option, but luckily it's a new phone so no data to transfer. I did run into an issue using Odin with USB C on my laptop to the phone, I think that is how I got into that predicament in the first place with Odin downloads failing to complete. Works fine with USB 2.
Phone is all set now and working fine. Thanks for your help.