Hello guys.
Basically I need some help with partitioning my micro SD card as even when I have formatted the card when I go to create a new partition it always says you need to delete all partitions before creating a new one. However I have so does anyone have an insight on this?
Furthermore I contacted the program developer and they were utterly useless and blamed me so dont ask me to contact them
minitool partition wizard can help you create a new partition and you dont need to delete all partition. maybe you already solve this problem because it has so long time.
I never heard of petitioning sd cards but i used to use my sd as ram for my android
Related
Hello.
I have bought a new SD Card (kingston 16gb Class4).
I had a lot of problems with ext3 make. By Gparted it have errors.
I have readed this topic.
Can I repair my SD Card?
Sry for my english.
How are you connecting the card? Via a card reader or still in the phone? If it's still in the phone make sure you are in recovery and not booted in to android.
I made it by card reader. Formatting and partitioning by recovery - errors.
Have you tried erasing all the partitions and creating them again? What happens if you click the 'Repair' button?
I've always done my partitioning with my card in the phone, connected to my PC while in recovery and used Minitool Partition Wizard for Windows (this software was suggested in a thread I read a while ago) and never had any problems.
There is also the possibility of the card having a hardware problem, so you might need to swap it under warranty.
yes, first i have erased all partitions (deleted)
On repair ext - error, fat32 works fine.
first make an extended partition for your fat32 and inside that a primary fat32.
The unallocated space make it ext3
snowboard said:
first make an extended partition for your fat32 and inside that a primary fat32.
The unallocated space make it ext3
Click to expand...
Click to collapse
shouldn't both partitions be primary (no extended ones)?
erase everything 1st keep it unformatted then create fat32 primary then ext primary (optional linuxs swap) this is what i have done when installed miui rom data2ext
i suggest you dont use that card reader try through the cell....
I have tried a lot of methods - ext still no works.
Sent from my HTC Desire using XDA App
Where did you get the card from?
Stupid question but two of my friends bought cheap (fake) cards from eBay and both had problems with them, either the card kept losing data or they go errors loading from the card due to the poor quality. In which case you need to spend a little more and get a proper card from amazon on a high street retailer.
If not then as suggested use try formatting and partitioning the card through the recovery on your phone, most of the up-to-date recoveries can do this and it's the easiest way to get the card ass needed for a2sd etc. if it still doesn't work then take the card back it's probably faulty.
I bought this card too and even though I had no issues formatting the card I do have speed issues with it. I've been in contact with Kingston and they're looking into it. My writing speed is 1.6Mb/s....
But now a tip for you, I couldn't use Gparted since it's Live CD wont start my monitors. So I downloaded Easeus Partition Master. Very easy to use and it worked perfect.
Start with your Fat32 partition and then your Ext partition.
You can find the program here: http://download.cnet.com/Easeus-Partition-Master-Home-Edition/3000-2248_4-10863346.html
Sent from my HTC Desire using XDA App
Hi Again,
Right so i had a look at what i needed to do to install the Leedroid ROM. I had to partition my card. Which is a 2GB. ut when i go onto GParted it only shows the normal memory not the other 1GB which i had partitioned before. Is it susposed to be hidden or something? ive tried formatting the card. it hasnt worked. Any ideas on why this isnt working?
Thanks in advance
I had the same problem after flashing that rom. May be a coincidence but wouldn' see sd cards. Turned out to be hardware fault and had to get back to stock and return. Try another sd card of reformatting. A couple of my cards became corrupt and needed reformatting. Seems ODD
Please use the Q&A Forum for questions Thanks
Moving to Q&A
How did you partition it initially, and what do you mean by 'normal memory'?
Assuming you created a 1GB FAT and and a 1GB EXT partition, do you mean the EXT partition is missing? It may be that the partition table is corrupt, try running fdisk, post the output.
I was created two partition on SD card 2x2GB and installed Link2SD-1.8.0
Set Link2SD-1.8.0 to use another partition for data, to save space.
After that, I realized, I dont need 2GB for app, I need 800MB.
OK, then I delete Link2SD-1.8.0.
And on PC with MiniTool Partition Wizard Home Edition, delete all partition and create 1st 3gb and 2nd 800mb. I format all partiton as FAT32.
After that Desire wont read my SD card!
I trying create one partion FAT, FAT32, Unformated... and phone dont read my card.
When I go to Recovery and mount USB, Windows read my SD card, but when trying with Desire mount sd card, he saying card cannot mount...
IMPORTANT PART
I trying another card (from nokia N73) and Desire read it.
If I use Desire SD card to N73, nokia says no SD card.
If I return back N73 card to N73, nokia says no SD card!!!?
If I return again to Andoid, then works, but in nokia no longer!
P.S
I dont have card reader...
From what I gathered from your post you made a mistake which causes the problems you described - you made all partitions FAT32... You should only make the first partition primary and FAT32 and the secondary should be EXT(2,3,4 - variant by your preference)... I'm not familiar with that MiniTool Partition Wizard Home Edition you used but I suspect that it won't do everything you need.... I recommend you reformat your sdcard with sdformatter or gparted (preferably because of alignment ability)... Probably after being formatted in gparted to a single primary partition you will get access to the card. If everything goes well then I'd repartition sdcard to link2sd needs in gparted or in the recovery itself (it probably won't make aligned partitions but to hell with that, they'll work )...
If you are not familiar with gparted search through xda since there are several good tutorials about using it... I use it regularly, i install it to a flash drive (through USBInstaller or Yumi or whatever tool you find) and boot to it, although you can burn it to a bootable cd/dvd just as well...
Hope any of this helped...
I used gparted and now is working! Thanx!
Great thing is gparted!
Hello everyone,
Yesterday I've partitioned my MicroSD card to be able to run Leedroid. But now that I want the partition space back to the microSD card and I can't. It seems that I lost 2GB.
- I've tried formatting the SD card while booted in Leedroid, but it just says the card is "corrupted" or some message like that;
- I've also tried using GParted to recover the lost ext partition, but also GParted doesn't show me the ext partition.
- I've tried mounting sd/ext as this seemed to help for a few people aswell.
Can anyone help me how I would be able to recover the lost space on the microSD card?
Thanks a lot!
It formats the SD in FAT, and then you do to him partitions to the card.
The SD is corrupt for extracting the SD of bad form and spending files without withdrawing it in a sure way.
Why don´t make partitions SD card with your Recovery? Is it simpler, aren´t you?
You should recover the whole memoría.
But, the SD would be spoilt.
Grettings.
So as you are saying. I lost those 2GB forEVER? Can't get them back somehow? :S
"Why don´t make partitions SD card with your Recovery"
I did make a partition with clockworkmod recovery if thats what you mean...
Did you do partitions with Recovery? And it will be of 2Gb, insurance....:
Then, if the Rom needs from a partition to start, and this one is of 2GB, you will not recover her until the SD this fromateada in Fat (the whole SD). the Rom, he needs this division for boot, truth?
I think that I am not explaining myself well, or that I do not understand well what you want to say, i´m so sorry!!!
Hello All,
First time poster here and very much a noob so please go easy on me.
I dug out my old htc desire the other day and though i would try out some new roms. I had an old sd card that i seemed to manage to break. i tried to use minitool partition to make a fat32, ext3 and swap partitions all set to primary, for some reason this sd card would not partition. Once i hit apply Mini tool would go though the motions and after a long wait a window titled "successful" pops up "saying apply all the pending changes successfully" however the sd card immediately reverts back to unallocated. I now cant format this card at all, not in minitool partition, sd formatter or windows disk manager. I thought oh it must be an old sd card so bought a new on tried the next day and all worked i had a nicely formatted card with fat32, ext3 and swap partition. So i thought i would try a new rom it seemed to install fine but the phone hung on the white htc screen, so i tried a few times then i get some error about the sd card on the phone. So i take it out put it in a usb reader and try to reformat and now this sdcard is doing exactly the same as the first one. Seems i have a nack for bricking them! Has anyone had this experience with this and do you know how to get the SD cards working again
thanks in advance
matt
Yh never use minitool, it create bad partitions. Use only 4ext recovery or gparted to partition.
http://forum.xda-developers.com/showthread.php?t=2125513