Automount USB - Samsung Epic 4G Touch

I'm unrooted btw & I just installed the Automount USB app off the Market. Works perfect when connecting my phone to my pc via usb, but wanted to know how to safely disconnect it. If I try to disconnect from the notification menu it auto mounts again.
Will simply disconnecting the USB cable cause any issues?

I honestly wouldn't think it would be bad for the phone, I usually just unplug it and haven't had a problem. Hope that helps
Sent from my SPH-D710 using XDA App

Related

[SOLVED]Computer see's device for a few seconds, then disconnects.

Interesting problem I have had on and off. When I plug my phone into my desktop, it will connect normally, then a few seconds later it acts like I unplugged it. It's not the rom as it does it in recovery as well(both with usb-ms activated and without). I have HTC Sync installed. Rebooting either the computer and/or phone doesn't fix it, it just goes away after awhile and starts working again. I've experienced the problem FAR less when connecting it to my laptop, it will typically work there and not on my desktop when the problem crops up.
it's like this problem but it's not constantly http://forum.xda-developers.com/showthread.php?t=711616
-Edit- the device also doesn't show it's charging even when it 'disconnects'
I have the same problem. just keeps discontenting over and over it sees it for a few seconds then disconnects reconnects then off again.
sasigns said:
I have the same problem. just keeps discontenting over and over it sees it for a few seconds then disconnects reconnects then off again.
Click to expand...
Click to collapse
Mine doesn't reconnect, it 'disconnects' and stays that way(as if i unplugged it) until i actually do unplug it and reconnect it.
-edit- 1,000th post, YAY
I was having the same problem on my MacBook until I realized the MacBook must be plugged into power. Once plugged in everything was good. I wonder if the Evo demands more power through USB then other devices.
Yeah, sounds like a power issue to me. If you're using a USB port on a hub or on a keyboard, try one on the PC itself. Also, it could be a slow USB port or a bad cable if you are continuing to have issues. Try another computer if you can, and if you still have the problem try a different cable. Still have the issue, reflash (if you're running a custom rom) or contact Sprint for service.
Same issue here, but on a desktop PC (Dell Studio XPS) using the front-mounted USB port (not a hub). Keeps disconnecting/reconnecting, but often takes 10-15 minutes between cycles. Using stock ROM (for now, at least). Will try other ports & another PC and will report back.
Already tried different ports, only motherboard ports
Rom doesn't matter as the problem exists in both android and recovery
Don't have a different cable, however the same cable will work fine on my laptop then not work on my desktop
mrono said:
Already tried different ports, only motherboard ports
Rom doesn't matter as the problem exists in both android and recovery
Don't have a different cable, however the same cable will work fine on my laptop then not work on my desktop
Click to expand...
Click to collapse
If it works on a laptop, but not the desktop, then it appears to be an issue with your desktop. Any other USB devices doing it?
I would check your motherboards manufacturer and make sure you've got the right USB drivers, a bios update might be in order as well.
But before all that, I've got an idea. First and foremost, try this:
Go to device manage (either from control panel, right-clicking my computer and going to properties, or searching for devmgmt.msc in the start menu search.)
Navigate down to Universal Serial Bus controllers, double click on USB Root Hub (you probably have 1 for every USB Port, so you may have to do them all.)
Click on the Power Management tab, and uncheck the "Allow the computer to turn off this device to save power." check box and see if that solves your problem.
i had this issue on my hero. it was corrected for me after i did a wipe of data and cache. i restored from titanium afterwards. YMMV
good luck
one thing you might try is disabling sense and using the android launcher. then reset the phone. once it boots up try and connect it to your pc. This was how I got mine to connect. when I was using the sense launcher it somehow blocked that options screen and the default I selected wouldn't stick. once I got the connection to my pc working this way I was able to re-enable sense and it's worked perfectly ever since.
I do not take credit for this fix, someone else on here told me to try this n it worked perfectly.
tarheelsmj12001 said:
one thing you might try is disabling sense and using the android launcher. then reset the phone. once it boots up try and connect it to your pc. This was how I got mine to connect. when I was using the sense launcher it somehow blocked that options screen and the default I selected wouldn't stick. once I got the connection to my pc working this way I was able to re-enable sense and it's worked perfectly ever since.
I do not take credit for this fix, someone else on here told me to try this n it worked perfectly.
Click to expand...
Click to collapse
it was nothing with the rom, since it was doing the same thing in recovery.
it turned out to be the short little usb extender cable that was going a foot and ahalf from behind my pc to the side so i could plug it in easier.
Sirchuk said:
...Navigate down to Universal Serial Bus controllers, double click on USB Root Hub (you probably have 1 for every USB Port, so you may have to do them all.)
Click on the Power Management tab, and uncheck the "Allow the computer to turn off this device to save power." check box and see if that solves your problem.
Click to expand...
Click to collapse
I can confirm this works on my HTC Desire - had been racking up my brains for the past couple of days now with no solution! Thanks a lot. This is on PC with Win7 Ultimate.

[Q] Connecting to computer =(

When i connect my G2 phone to the computer it use to have a notification to tell me it was connected to a computer and let me turn on usb storage mode. When i plug it in to my computer it does nothing just sits there charging like it was plugged in to a wall charger no option to go to usb drive mode. I am using CryogenMod 6.1.1 any ideas?
I tried 2 different cables and computers...
You might not have the proper drivers installed on your computer.
Sent from my HTC Vision using XDA App
joemm said:
You might not have the proper drivers installed on your computer.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I don't think its a driver issue because it comes up as a removable disk no matter what computer i am on. It seems like it's on the phones side there is no notification like there used to be. This all started today. was working perfectly before. I have not clue what could of done this I haven't made any drastic changes on my phone or anything.
I don't know what happen i restored it back to another restore point i had it started working again! i don't know how or what happen.
enp82003 said:
When i connect my G2 phone to the computer it use to have a notification to tell me it was connected to a computer and let me turn on usb storage mode. When i plug it in to my computer it does nothing just sits there charging like it was plugged in to a wall charger no option to go to usb drive mode. I am using CryogenMod 6.1.1 any ideas?
I tried 2 different cables and computers...
Click to expand...
Click to collapse
You've probably got usb debugging enabled. Disconnect your phone from the computer, disable usb debugging and then connect it again.
EdKeys said:
You've probably got usb debugging enabled. Disconnect your phone from the computer, disable usb debugging and then connect it again.
Click to expand...
Click to collapse
The phone was always on debugging mode, and I still always got the USB connected notification. I think it was an Ap I downloaded that messed with the startup programs. I am not completely sure it is that but was the only major change in my phone since this started happening. So IDK glad its resolved through the restore and backup.

Touchscreen while usb connected...

My Touchscreen Don't work correctly while i connect it with The Computer ...
Any idea?
Sent from my MB525 using XDA App
Happens to me as well. No idea why either.
It happened to me when I connected my Defy to the Apple's Greenpoint charger.
So I think maybe there're some problems with your USB port or your data cable.
With some SBFs i dont't have this Problem!
This is magical
I had this problem when I started using the phone. After wiping it vanished.
it happens to me with some chargers but not with others. With original and with other LG no problem, but with another i have that problem too.
I have this issue too with samsung charger. I guess this is feature
I guess the problem from the usb cable it self because i have this problem before when i connect the phone with the original usb, the touch screen works properly but when i used cheap chinees cable then the touch screen become crazy
use advanced task manager it its probably helping in such matters , just end all and restart if any launcher u have already.

i think my phone is defected cant transfer files on my computer

I rooted my phone and have it with the latest calkulin rom.. the problem is wen i connected to my computer my phone still thinks its charging. and i have no option to turn on the usb mass storage.?? so i dont know if my phone is defected or is it a rom. issue..yet i already tried 2 roms flashing them fresh.. but nothing seems to fix the problem...does any one have any idea what causes this???
settings>wireless and network>usb utilities
With the phone unplugged from the usb click the connect button then connect the usb. You should recognize the standard usb screen at this point.
Some cables (notably most LG branded... But there are others) just don't work... Damned if I know why.
Sent from my SPH-D710 using XDA App
I would flash it back to stock if you already played with different cables and fixed your settings. Getting it exchanged should be easy if your still having the problem on stock.

connect to pc?

hey guys it seems that my Telus galaxy s 2 X does not connect anymore to pc??
when i plug it in it charges only?but nothing appears on my pc??
try a different usb cable mine did that i was using a different usb and then it stoped working so now i just use the one that came with the phone and it works
Sent from my SGH-T989
i tried..odd..
i think it stated when i activated power saving mode..
im testing now,..
ok so i shut off power saving mode rebooted my device and bingo..odd ah...
I restart my computer when that happens. For me I believe the issue is caused by plugging multiple phones into my pc to load files. This assumption is because I never had this trouble until I started loading apps on my girlfriends bionic as well as my hercules. I am using the cable that came with my g2. My hercules didn't come with cables.
Another fix is WiFi File Explorer. What I like about this fix is that it saves wear and tear on the micro usb jack.
true i will try that.thx

Categories

Resources