Trying to install this: http://forum.xda-developers.com/showthread.php?t=1402341
on my Samsung Galaxy Nexus, which is rooted.
However every time I try to install via CWM Recovery, I get 'installation aborted', what would cause this?
sorry, i don't understand
Thanks for replying.
I've rooted my device and I want to install a custom ROM.
When I try to install it via CWM Recovery, it says the installation was interrupted.
How can I fix this?
Did you try downloading the ROM again and putting new copy on your sdcard? Possibly a corrupt download
kwkbnk said:
Did you try downloading the ROM again and putting new copy on your sdcard? Possibly a corrupt download
Click to expand...
Click to collapse
Thanks, I'll try that.
Just to check,
http://rootzwiki.com/topic/11455-rom-android-open-kang-project-maguro-milestone-2/
'AOKP maguro Milestone 2 '
which is a zip file
Is what I should be trying to install right?
Maybe clear cache or data? (At your own risk as i am not sure)
I used mah awesome Xperia Play R800i w/ CM7 to write this
What is your version of Clockwork Mod?
Did you make a full Wipe of you phone before flashing the new ROM?
Did you check the checksum of the ROM file?
if you use CMW you need safe zip file into sd card.
Check this also.
Is the bootloader unlocked on your phone? Having this in place is better incase your attempts soft brick the phone.
Z0R said:
if you use CMW you need safe zip file into sd card.
Click to expand...
Click to collapse
internal SD card that is.
1st time i installed a rom, tried it from external... LOL
Which Device are you on?
It's easier to help you when we know which device you're talking about
Cythreill said:
Trying to install this: http://forum.xda-developers.com/showthread.php?t=1402341
on my Samsung Galaxy Nexus, which is rooted.
However every time I try to install via CWM Recovery, I get 'installation aborted', what would cause this?
Click to expand...
Click to collapse
Vreestyle said:
Which Device are you on?
It's easier to help you when we know which device you're talking about
Click to expand...
Click to collapse
@OP Search in your device forum and if you don't find an answer then ask there so you're talking to people with the same device. They will be able to help better.
.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
Related
hey guys i bought a Dinc of a buddy of mine which was already rooted and running hydra kernal i just tried to flash the kingxklick #3 kernel and now my phone is just stuck in a boot loop and i cant figure out how to fix this please help
Flash another kernel. If you were smart enough to do a nandroid backup, restore it. Otherwise copy a kernel to the SD card.
I don't believe that you can just flash over a king kernel over the hydra, would have to do a full wipe. Download a rom that you see here to your liking, put it on the SD card, then boot into recovery (hold vol- & power button), and install.
i wasnt smart enough to do a nandroid backup and i dont know how to put a different kernel on my SD while my phone is doing this i cant get into my SD unless my phone is able to attach it right?
You're going to need an SD card reader and transfer that way. And post this in general next time.
ok sorry about that so if i flash a new rom it will fix it is what your saying?
g00s3y said:
I don't believe that you can just flash over a king kernel over the hydra, would have to do a full wipe. Download a rom that you see here to your liking, put it on the SD card, then boot into recovery (hold vol- & power button), and install.
Click to expand...
Click to collapse
Uh...yes you can. I've done it.
You can flash kernels over kernels. No problem.
As a side note, please read stickies before you create threads. This does not belong in this forum. Thanks!
ok sorry about posting a thread in the wrong spot guys but i did solve the issue thanks for the help
RYANANIMOSITY said:
ok sorry about posting a thread in the wrong spot guys but i did solve the issue thanks for the help
Click to expand...
Click to collapse
And created a new account to tell us that you fixed it?
Hi guys. Before you bash me saying I did not search, trust me I did.
Goal:
I am trying to install cyanogenmod 10 M2 following this guide: oh well, I guess I can't post URL's. But the guide is a wiki from cyanogenmod and is called "Galaxy Nexus (GSM): Full Update Guide"
wiki.cyanogenmodDOTCOM/wiki/Galaxy_Nexus_%28GSM%29:_Full_Update_Guide
When I get to the second command which is to enter the CW menu: fastboot boot boot.img
Problem: My phone gets stuck at the Google logo and my PC says that the driver failed to install.
Here's what I have tried doing and what I installed:
Android SDK + Google USB driver are installed
Universal Naked Driver is installed
I tried re downloading all the files and restarting
I tried changing computers
I even tried FORMATTING my computer and installing a fresh copy of Windows 7 64 bit.
My phone is showing bootloader in the device manager like it should. Everything is FINE and working except for that part. All my drivers are correctly installed on my PC. I have been trying to solve this for exactly 5 hours.
So my question is: how do I solve this ?
Thanks in advance
cheers
You don't have to manually flash the boot.img, just flash the ROM through CWM
Redownload the ROM, check md5 hash, flash away.
Restore the nandroid of your previous working state btw.
cyanogenmod's thread, FIRST POST
Instructions:
First time flashing CyanogenMod 10 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Click to expand...
Click to collapse
EddyOS said:
You don't have to manually flash the boot.img, just flash the ROM through CWM
Click to expand...
Click to collapse
OK but I'm trying to get in the CWM menu. That's not working. How do I enter that menu on my phone ?
Also I don't want to root my phone.
Installing CM10 WILL root the phone as it's a custom ROM
Super n00b...
EddyOS said:
Installing CM10 WILL root the phone as it's a custom ROM
Super n00b...
Click to expand...
Click to collapse
lmao
Yep. I am a noob. My first android phone....
So I really need your help guys ..
I just learned that I need to root my phone.
Instructions:
First time flashing CyanogenMod 10 your device, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Click to expand...
Click to collapse
Ok so, I need the "instructions are available here" please Or I guess a guide to root my phone and be able to get in the CWM menu....
Ok. EDIT: I understood how it works. I'm doing it now... I'll let you know if something goes wrong. Thanks guys.
Just Google how to flash a new ROM on the Galaxy Nexus - they are plenty of how to guides and videos
ekoloud said:
Yep. I am a noob. My first android phone....
So I really need your help guys ..
I just learned that I need to root my phone.
Ok so, I need the "instructions are available here" please Or I guess a guide to root my phone and be able to get in the CWM menu....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1529058
Yeah. Thanks guys. I did it. I guess we all start by being noobs
Np, but you need to refine your search skillz.
Sent from my i9250
Do you lose LTE or other functionality with CM10 on the CDMA GNex?
shizat63 said:
Do you lose LTE or other functionality with CM10 on the CDMA GNex?
Click to expand...
Click to collapse
Dont hijack the thread. It has completed its purpose, and it should be closed.
Sent from my i9250
Hi, guys and girls.
I know this question sounds stupid, and someone might say: "Duuuh, use the seach-function!" - Well, I have, but as a new member it's pretty hard finding the things that I need when there's so many sections and such.
Now for my question:
At Christmas I recieved a Samsung Galaxy Gio. The phone is cool, and I like it a lot. However, I do wanna use a custom ROM. Can anybody tell me (step by step, please) how to do so? I have read the "Big thread For New Users", but somehow I managed to get lost in all of the fine new words.
I have done it before on my HTC Touch Diamond, (but I dropped it and now it won't start again) but I really can't figure out how to do so this time - and it would be sad to ruin my new phone by doing stuff I don't know anything about.
So, could anybody please be nice and tell me how to install a custom ROM? And please keep in mind that I'm a huuuuge newbie
I'm using Android 2.3.6
Thanks in advice.
Dennis
P.S. Would I be able to "revert" everything back to how it is now? Is there a way to "unroot" (I know there is, just not how to), and can the default ROM from Samsung be found anywhere?
okay so first DON'T use Rom Manager because it bricks your gio.
if you want to flash a custom rom you need to flash clockwork recovery. after that download "ext4 formatter" and flash it with cwm recovery (install zip->choose zip). download a custom rom and flash it in the same way as "ext4 formatter". wipe data and restart your phone... (clockwork mod recovery, ext4 formatter and custom roms can be found in development section)
if you don't like all these custom roms you can install the stock rom by downloading a stock rom on sammmobile.com and flashing with odin.
Sorry for my bad englisch
You made it sound so easy
Please keep in mind that I'm at huuuge newb. I don't know what half of the words you mentioned means. Could you please explain it a little more detailed?
Thanks,
Dennis
DennisHermannsen said:
You made it sound so easy
Please keep in mind that I'm at huuuge newb. I don't know what half of the words you mentioned means. Could you please explain it a little more detailed?
Thanks,
Dennis
Click to expand...
Click to collapse
You don't to be a delevoper if you want to flash your phone. It's really very easy if you read a few infos about this. One post above you have a list of things that you have to do but it's easy. You can do this in about 10 minutes. Very important is: you must know what you do. And do this ! Here you can view a lot of tutorials and links of roms, recorecys etc. :
http://forum.xda-developers.com/showthread.php?t=1623393
Ok, so I guess this is what I'm gonna do:
1. Doing a hard reset of my phone (wipe).
2. Root my Gio using this guide.
3. Downloading and flashing a custom ROM (I'm very unsecure on this step, please give a detailed "guide").
4. After flashing (is flashing the same thing as installing?), I start up my Gio and I'm gonna do a hard reset.
Is this the way to do it?
DennisHermannsen said:
Ok, so I guess this is what I'm gonna do:
1. Doing a hard reset of my phone (wipe).
2. Root my Gio using this guide.
3. Downloading and flashing a custom ROM (I'm very unsecure on this step, please give a detailed "guide").
4. After flashing (is flashing the same thing as installing?), I start up my Gio and I'm gonna do a hard reset.
Is this the way to do it?
Click to expand...
Click to collapse
1. Not needed to do before flashing but it doesn't hurt either
2. No need for ROOT if you plan flashing a custom rom. 100% of custom roms have root pre-installed.
3. Download the file, put it on your SD card (do not put it in any folder, just on your sdcard), go into recovery mode, chose install zip from sdcard, navigate to the file, chose it, chose Yes and wait for it to finish, do wipe data/factory reset and wipe cache partition from CWM and you're done!
4. Yes, start it up (it takes quite long time to boot it for the first time) and you may do the hard reset but i have never done it and my Gio is still working perfectly. And yes flashing and installing is basically the same thing.
P.S I know how you feel exactly atm. When i got my gio and learned about flashing custom roms and rooting, I was scared as well but now i have installed many roms and now it is like a normal thing for me. Have fun and DO NOT USE ROM MANAGER!
Don't forget to click thanks if it helped
DennisHermannsen said:
Ok, so I guess this is what I'm gonna do:
1. Doing a hard reset of my phone (wipe).
2. Root my Gio using this guide.
3. Downloading and flashing a custom ROM (I'm very unsecure on this step, please give a detailed "guide").
4. After flashing (is flashing the same thing as installing?), I start up my Gio and I'm gonna do a hard reset.
Is this the way to do it?
Click to expand...
Click to collapse
The first two steps are right. after that you are downloading the clockwork mod recovery (also called cwm) and the ext4 formatter from this thread http://forum.xda-developers.com/showthread.php?t=1421650. now you are entering the stock recovery. turn off your phone and restart it but hold the power and home button at boot. now flash the cwm zip file (in the thread is all explained how to do). restart the phone and enter the cwm recovery by holding power and home button at boot. go to "install zip" -> "choose zip" and choose the ext4 formatter zip file. okay now wipe data. download a custom rom and install it in cwm like the other zip files. wipe again data. now restart your phone.
and tadaaa it should work
ps: if you are from Germany (i think so because of your name) you can write me a pn if you need help and i can explain it in German
Sorry for my bad englisch
Hi,
Thanks for both of the answers - However, there is something that I'm confused about now. Jyrx, you say that I don't need to root if it's a custom ROM, because custom ROMs already have done a root. But emyaz tells me that it should be done. Aren't most ROMs from xda custom? Fx. this: http://forum.xda-developers.com/showthread.php?t=2062676 (CyanogenMod 10.1 [BETA 2.5]) - is this a custom ROM? If it is, I don't need to ROOT, right?
emyaz, unfortunately no - I'm Danish, and I know very little German
DennisHermannsen said:
Hi,
Thanks for both of the answers - However, there is something that I'm confused about now. Jyrx, you say that I don't need to root if it's a custom ROM, because custom ROMs already have done a root. But emyaz tells me that it should be done. Aren't most ROMs from xda custom? Fx. this: http://forum.xda-developers.com/showthread.php?t=2062676 (CyanogenMod 10.1 [BETA 2.5]) - is this a custom ROM? If it is, I don't need to ROOT, right?
Click to expand...
Click to collapse
Yes, like I said every custom rom has root. I think what emyaz thinks is that root is essential and if you don't install a custom rom you should root your phone. And your example has root and it doesn't need to be rooted.
EDIT: On XDA yes, there are basically only custom roms. If a rom isn't a custom rom or doesn't have a root then it is most certainly said in the topic.
You need to root your device before you start flashing roms. But is it nessesary to flash an ext4 formatter. I didn't do it. I do not have any problems. Where do you need it for?
Ardee - Sent from my Gio using xda premium app
Now I'm confused. One says that I don't need to flash, but others says that I need to.
I didn't root my phone before flashing roms. And I also haven't used ext4 formatter and it is working fine. So I don't know about that really.
---------- Post added at 12:29 AM ---------- Previous post was at 12:27 AM ----------
Well I think for safety, root it. If you don't probably nothing will happen but I'm not sure, but if you do then nothing bad will happen either.
Half of the people answering give the wrong answers.
- root
- install custom recovery
- backup
Flash ext4formatter (cleans all partitions and mounts as ext4, no wipes needed, only use this first time installing a rom or after using ODIN to restore to stock)
- install rom
-reboot
Sent from my GT-S5660 using xda app-developers app
what i mean was that you need to root your device to install the cwm recovery. so the first step is to root your device and then install cwm recovery. sorry if i confused you
all custom roms are rooted...
Sorry for my bad englisch
Half of the people answering give the wrong answers.
Click to expand...
Click to collapse
Yep, I think I just bricked my Gio...
DennisHermannsen said:
Yep, I think I just bricked my Gio...
Click to expand...
Click to collapse
It won't boot or is the boot animation reloading?
Jyrx said:
It won't boot or is the boot animation reloading?
Click to expand...
Click to collapse
There's two boot screens next to eachother
Haha, oh God, I think I'm gonna wait until I have researched a little bit more...
When I tried to unbrick it, I flashed a wrong stock ROM (somehow Odin let me do it )
I need a really detailed guide on how to do it (install a custom ROM).. I've been trying to unbrick my phone for the last 1½ hours
Fortunately it all works fine now. I just need a detailed guide or something so I don't **** up
it wasn't bricked, thats the most wrong used term here on XDA.
voetbalremco said:
it wasn't bricked, thats the most wrong used term here on XDA.
Click to expand...
Click to collapse
Potato, potato - It wouldn't get past the to bootscreens, so I just took a guess.
U flashed ext4-formatter.zip?
Sent from my GT-S5660 using xda app-developers app
Basically this is what happened, I rooted my phone using TeamEpic-Root-from-Recovery-v5.zip and CWM-Recovery-LTE-SGS3-v5.tar.zip with Odin without any problems. Then I tried tampering with the framework-res.apk and I thought I did it correctly, I replaced it with the current res in the /system/framework folder of the internal sd. Then I rebooted my phone and bam stuck at the Samsung Galaxy S III screen. I've now tried finding a way to get into the internal sd card to replace the framework-res.apk back to original but my computer wont recognize it when in recovery or downloading mode. I have trying reflashing Clockworkmod several times and I've tried wiping the cache and factory reset. When I factory reset it says error mounting sd card, aborting. I am now out of ideas as to how to fix it and I'm not sure what to do with PIT files, which could be a possible solution. I am running Tmobile's Galaxy S3 T-999 16gb. All that being said, anyone who can help me get my phone back up and running I will reward you with $10 through paypal, because that's how desperate I am to fix my phone before someone finds out I bricked it!
Re: $10 Reward to whoever can help me get my phone working again! (SOFT BRICK)
Something similar happened to me. What I did was use a different lower version of Odin and reinstalled the drivers, and everything worked fine. It may not work for you but it's just a, thought, and try reflashing with the T-Mobile Stock ICS rom.
Sent from my SGH-T999 using xda app-developers app
camacho.kyle said:
Something similar happened to me. What I did was use a different lower version of Odin and reinstalled the drivers, and everything worked fine. It may not work for you but it's just a, thought, and try reflashing with the T-Mobile Stock ICS rom.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply, what do you mean by reinstall drivers, like kies? I can't flash any rom's because I can't transfer the zip files over to the sd card since my phone won't recognize it since it won't go past the samsung screen. All I can do is flash clockwork mod from odin like .md5 and .tar. If I install a lower version of Odin what version did you use, and do you think flashing clockwork mod will be able to replace the framework-res.apk through odin?
Re: $10 Reward to whoever can help me get my phone working again! (SOFT BRICK)
iAmYoungSpiffy said:
Thanks for the reply, what do you mean by reinstall drivers, like kies?
Click to expand...
Click to collapse
Reinstall the drivers for Odin, and you can even try reinstalling Kies too. Make sure you restart your pc after you reinstall kies and the drivers.
Sent from my SGH-T999 using xda app-developers app
Are the files you flashed for a I9300? They do not look familiar to me.
Re: $10 Reward to whoever can help me get my phone working again! (SOFT BRICK)
Aerowinder said:
Are you using a SGH-T999 or an I9300? If the former, use the links in my signature. Should fix it if it's not hosed.
Uninstall Kies (and the drivers if the Kies uninstall doesn't do it).
You may want to Odin a stock rom. If you do, it it before flashing a recovery.
Click to expand...
Click to collapse
He's using a T999
Sent from my SGH-T999 using xda app-developers app
camacho.kyle said:
He's using a T999
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Do you think changing the clockworkmod .tar.md5 file and flashing something different will have any affect? If so, what do you suggest?
Check out my signature, it has everything you should need (save the OS you want).
Aerowinder said:
Check out my signature, it has everything you should need (save the OS you want).
Click to expand...
Click to collapse
Wow thanks for that clockworck mod! It has much more features than v5 I'm gonna play around with it and see what I can come up with.
Aerowinder said:
Check out my signature, it has everything you should need (save the OS you want).
Click to expand...
Click to collapse
Thank you for the files, I'm now able to flash roms from my sd. I"ve flashed your clockwork and superuser. However, when I load up the phone I'm still getting stuck at the samsung logo
no external sdcard?
Did you try to flash another rom? What were you using, and what did you flash?
Why are you trying to fix a bricked ROM with CWM?
Just Odin a stock rom, and work from there. I don't know why you would keep trying to reflash recovery, that isn't going to do squat for you.
Go to the section/post in the general section on ODIN and pick a STANDARD ODIN image...Odin isn't that hard to manage.
Or use the S3 toolbox posting in the general section.
Most likely, this is because the rom has something funny in the cache...WIPE it to factory if you can get into a recovery...
Scott
mt3g said:
no external sdcard?
Click to expand...
Click to collapse
I do, 64gb
Aerowinder said:
Did you try to flash another rom? What were you using, and what did you flash?
Click to expand...
Click to collapse
I used Odin v307 to flash TeamEpic-Root-from-Recovery-v5.zip, i used clockwork mod to flash CWM-Recovery-LTE-SGS3-v5.tar.md5 (I got both of these from a post on these forums. I also tried superuser. Nothing is working do you have a download link to a ROM I could try?
You can't flash a rom from your external sdcard? or your internal? or either?
sbaeder said:
Go to the section/post in the general section on ODIN and pick a STANDARD ODIN image...Odin isn't that hard to manage.
Or use the S3 toolbox posting in the general section.
Most likely, this is because the rom has something funny in the cache...WIPE it to factory if you can get into a recovery...
Scott
Click to expand...
Click to collapse
I've now tried flashing Team Epic's ROM and I've wiped all cache restored to factory settings wiped dalvik cache, no progress.
mt3g said:
You can't flash a rom from your external sdcard? or your internal? or either?
Click to expand...
Click to collapse
Now that I updated my clockwork mod I'm able to flash from my sd card. Trouble for me is finding the right ROM that is compatible and appealing. I've tried a few now and whenever I flash them I go to boot up the phone and I get stopped on the samsung galaxy s iii logo. There has to be a way to wipe everything and flash a fresh clean rom. I've stayed up till 2 in the morning only to get up at 6 in the morning two nights in a row now totaling almost 10 hours of trying to fix my phone
iAmYoungSpiffy said:
I used Odin v307 to flash TeamEpic-Root-from-Recovery-v5.zip, i used clockwork mod to flash CWM-Recovery-LTE-SGS3-v5.tar.md5 (I got both of these from a post on these forums. I also tried superuser. Nothing is working do you have a download link to a ROM I could try?
Click to expand...
Click to collapse
From this quote it seems that you are flashing TWRP recovery and the flashing CWR right after it. That makes no sense. I don't use CWR on this phone but have used it before. So I'm not sure that LTE should be in the description as T999 isn't an LTE device. I could be wrong though. You can get an Odin-able version of either TWRP or CWR from this page.
Go here and download the stock image TMO T999UVDLJA. Follow the directions in the OP (make sure you unzip it first. Read and then read it again) . Fire up Odin and put the Root66 tar in the PDA slot (nothing in PIT). Flash the Root66. It will take about 5 minutes or so. Once it says Pass it should reboot. It WILL bootloop. If you have already flashed EITHER TWRP or CWR, then boot into recovery and Factory Reset. If you haven't flashed EITHER TWRP or CWR, then pull your battery and boot back into Download Mode. From there you put EITHER TWRP or CWR into the PDA slot and flash it. Pass. The reboot into recovery and Factory Reset.
First boot will take the longest bc it has to rebuild the /cache and /dalvik-cache. Let's get you up and running before you move on to flashing a custom ROM, OK?
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
DroidJay123 said:
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
Click to expand...
Click to collapse
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Mr.Rageface said:
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Click to expand...
Click to collapse
Yes it is recognized once in Download mode...sorry about that. What can I do to get it up and running? I am not new to flashing, etc so it's got me really upset that I cant get it to boot. What could possibly go wrong?
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
http://fs1.d-h.st/download/00023/E5R/I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 You can download that file and put it in the PDA section once you run Odin and run it from there. This will put your phone back to the Stock Rom 4.1.1 and you can restart from there if you want.
Mr. Rageface
xXFl4sh said:
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
Click to expand...
Click to collapse
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
DroidJay123 said:
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
Click to expand...
Click to collapse
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Mr.Rageface said:
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Click to expand...
Click to collapse
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
DroidJay123 said:
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
Click to expand...
Click to collapse
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Mr.Rageface said:
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Click to expand...
Click to collapse
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
DroidJay123 said:
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
Click to expand...
Click to collapse
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Mr.Rageface said:
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Click to expand...
Click to collapse
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
DroidJay123 said:
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
Click to expand...
Click to collapse
BTW, how can I confirm I have the most recent bootloader version? It looks like my phone's current baseband version is i747UCDLK3. I did download the boot_CWM_i747UCDMG2.zip file and put it on the internal storage. Do I just want to flash that file to update my bootloader?
Thanks again!
-Jay
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Mr.Rageface said:
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Click to expand...
Click to collapse
Thanks for the information. The phone that has been all screwed up and the reason I posted a thread in the first place is my gf's GS3. I have her's rooted again and running. I am going to update her baseband version and then install a custom ROM so she's up to 4.3.1. As far as mine goes, I have been fine. I myself also still have the outdated bootloader version. Is it ok to just flash that update for the bootloader without it doing anything wrong? I'm asking this since I'm rooted and running a custom ROM with no current problems. In other words, I don't want to end up saying "it wasn't broke, why did I mess with it" ? I did bookmark that thread you referenced in your last message. Damn that thread is LOADED with just about everything one would possibly need to know about Android and making it their own.
So my g/f accepted the OTA update today (not knowing obviously) and she got updated to 4.3 via AT&T, unfortunately!! I attempted to flash the latest Liquid Smooth ROM and I continue to get a FAILED message during installation. It mentions a bunch of bootloader numbers ( I am assuming the only ones this ROM is compatible with?) So is there any way to roll the bootloader back to a compatible one or just go a different route for the custom ROM?
Also, I attempted flashing the file to update my baseband yet when I so into the device, it doesn't show as having the updated version? Is there a different way of doing it or maybe a different file?
I'm not to sure about the troubles that may come about since your gf went with the 4.3 OTA but If I am not mistaken it will need to be downgraded before you try doing anything else to it and if it is not showing that you updated your bootloader on your phone I recommend grabbing the App called Root Checker to double check then look for another file, tho unless it failed it should have updated it or messed up your phone one.