Develop Bugs

Anyone considering painting?

I want to paint my phone with gold and red. I see a lot of info on the net about painting your phone but I rather ask the xda crowd.
Will it affect phones signal?
Primer necessary? Any suggestions on brands or specific types of paint?
Am i mad?

eww. Don't do it.

oC|-TiTaN said:
eww. Don't do it.
Click to expand...
Click to collapse
This
Ten Characters

dont worry lol. I changed my mind when i found a carbon fiber skin online.

If you have an airbrush you can do it, and make it look good.
I airbrushed a spare back cover for my Dinc, did it in a nice pearl metallic blue, was considering doing a pink camo one for my wife. An Airbrush, proper prepping, and patience will net you a nice result. You could also look in the ricer section of places like AutoZone and get carbon fiber wrap/decal/overlays and cut that out to your phone and cover it. Alot of options if you are crafty enough and take your time. I have been making phone docks for our work desks, nightstands/etc out of wood for our Dincs, and will be making a few prototypes for the X before it arrives some time next year You would think Motorola would produce the damn things.........

Do you have a blog or something it would be interesting to see what you've done

gold and red is TACKY. keep the dark gray and do some red accents.
Sent from my DROIDX using Tapatalk

mavermc said:
Do you have a blog or something it would be interesting to see what you've done
Click to expand...
Click to collapse
No I dont have a blog, I just like to tinker, but here is a pic or two of the prototypes I have done for our Dinc's. This weekend I will probably do a full redesign and make 2 for my X with magnets embedded for the home dock Multimedia Mode.
I have made like 15 of these, moved on to hardwood and going to stain the first one, better sanding, etc, the 2 I made for my Mom look fantastic, also experimenting with different fabric, I got a sq yard of nice leather, wondering how much I should use, only on the back? the sides? so yeah, just tinkering.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

it looks like a little park bench
nice build quality

ixobelle said:
it looks like a little park bench
nice build quality
Click to expand...
Click to collapse
lol, I actually made a mini Adriaondak chair for my moms Moto Droid. I only did one. Was a major pain as I had to cut so many small pieces, then glueing it together was another pain. Never again on that one.
Those are just blah prototypes. I moved onto better wood and now that I have the Dx, I am going to work on one that fits the phone, and fits the curve of the back and puts it into Desk Clock/Multimedia Mode. My work schedule keeps me limited to weekends, and it has been 105+ and I dont have AC in my woodshop. Was hoping to have a few 5-10 made by now and all the bugs worked out for the Dx model. Wifes Dx is coming around the end of the month so I still have a little time.

Looks cool!
Nice job!
oldmacnut said:
No I dont have a blog, I just like to tinker, but here is a pic or two of the prototypes I have done for our Dinc's. This weekend I will probably do a full redesign and make 2 for my X with magnets embedded for the home dock Multimedia Mode.
I have made like 15 of these, moved on to hardwood and going to stain the first one, better sanding, etc, the 2 I made for my Mom look fantastic, also experimenting with different fabric, I got a sq yard of nice leather, wondering how much I should use, only on the back? the sides? so yeah, just tinkering.
Click to expand...
Click to collapse

Kickstand Case from Korea

Ive seen this on a couple of threads but i havnt seen and reviews yet?
Whose got this and is it work well?
thanks
http://cgi.ebay.com/galaxy-s-I9000-..._MobilePhonesCasesPouches&hash=item2a0a8f0118

looks like junk

kolyan said:
looks like junk
Click to expand...
Click to collapse
I agree, It doesn't even protect the sides all the way...
I wouldn't buy it

Kinda cool how they integrated the kick stand, but I agree its kinda a bad wrap around the phone.

It does cover more then the T-Mo Clear case w/kickstand though and for $9 i think i may just get it to try it out.
On a side note.... i stopped by the Verizon store today to see if the sweet Fascinate Kickstand case would fit on my Vibrant. It did fit almost perfect except the speaker was block and the camera was half blocked. I think im going to order this korean one and then if that doesnt work i may just buy the fascinate one and modifiy it to work with my vibrant. It really felt and looked awesome... just wish it was 100% perfect match

*My previous post got deleted by accident w/all the other 24 hr data during yesterday's maintenance*
I think that seller was selling 3 diff colors; black, white, and pink(?). I bought the black one 3 wks ago and recieved it about a wk ago. Initially, I thought that it was going to be shiny hard plastic case but to my pleasant surprise, it wasn't. The exterior is covered in a thin layer of hard rubber, covering the black hard shiny plastic underneath, while the inside of it is slightly padded. It looks a lot better in person than in pics.
Is the kickstand serving its purpose? Hell yea, it is...it makes watching movies on my dope SAMOLED screen that much more awesome The hard rubber makes for a good grip so it won't easily slip out of your palms like it sometimes would w/out it and it gives the phone an overall slick/cool (IMO) look. The only downside so far is that I'm getting some very small worn out spots where the hard rubber has rubbed off but it's not a big deal though.
Pics or it didn't happen, you say? Well, check 'em out !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Awesome TEE!!!!! That's exactly the response I was looking for! I went ahead and ordered mine last nite! Thanks so much! cant freakin wait!

No prob...it's a great investment. The seller also threw in a surprise gift--an extra clear jelly case!

TEE82 said:
No prob...it's a great investment. The seller also threw in a surprise gift--an extra clear jelly case!
Click to expand...
Click to collapse
just wanted to bump this thread and want to say i absolutely love this case. its slim and doesn't add any heft to the phone. i also like how the company added some soft padding on the inside of the case so our phones won't get scratched up on the battery case.
only problem is with the extra jelly case they provided; while looking and feeling nice, it's hard to press power button with it on.
at any rate, excellent case.

I purchased one about a week ago. I havent received it yet, but i can wait.

It looks good I just placed an order. thanks for posting pictures.

Do you like my SGS II Android Robot?

My korean friend sent me this over from Korea since we both bought this phone practically on the same week. Me in London, him in Seoul.
Thinking of selling a ton of these as they are good screen wipers.
You guys like?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Swyped from my GT-I9100 using XDA App

Nearly as good as Android robot boot screen .
jje

pretty cool) possible to order somewhere?

I want two!
I am in Canada though. Anywhere I can order them?

makes it difficult to put in my belt case however

A quick google yielded a link, but being new i cant post it
However, the item is on a site called Alibaba and its called "Android mascot Celluar strap with cleaner".
Like the OP said, it looks like it too would be coming from seoul

I have a couple left my friend sent me cus they were dead cheap. Ill be willing to send one over(from UK) if the price you offer is worth the hassle lol >.<
Swyped from my GT-I9100 using XDA App

Darclite said:
A quick google yielded a link, but being new i cant post it
However, the item is on a site called Alibaba and its called "Android mascot Celluar strap with cleaner".
Like the OP said, it looks like it too would be coming from seoul
Click to expand...
Click to collapse
found a few on ebay. just search Android strap (or something like that)

Very nice! So, the Galaxy S2 does have a place to put cellphone straps in? Or do you need some kind of adapter?

I want that phone strap !!
Edit: Found it on ebay. LOL
http://cgi.ebay.co.uk/Android-Masco...084515?pt=PDA_Accessories&hash=item41596b6463

nkobayashi said:
Very nice! So, the Galaxy S2 does have a place to put cellphone straps in? Or do you need some kind of adapter?
Click to expand...
Click to collapse
There is a insertion hole above the volume rocker. Loving my robot
Swyped from my GT-I9100 using XDA App

Yeah I was wondering where that hole was on my S2, considering most phones developed by Asia based companies have some sort of cell phone strap hole or hook. You open the back plate and loop the strap onto a bit of plastic inside the back compartment. I thought it was a mic or speaker hole at first and didn't look into it further.
Also found my T-DMB antenna on the other side, it's a good 22cm long. It's been just under two weeks now, I feel like an idiot.

Sticks02 said:
Yeah I was wondering where that hole was on my S2, considering most phones developed by Asia based companies have some sort of cell phone strap hole or hook. You open the back plate and loop the strap onto a bit of plastic inside the back compartment. I thought it was a mic or speaker hole at first and didn't look into it further.
Also found my T-DMB antenna on the other side, it's a good 22cm long. It's been just under two weeks now, I feel like an idiot.
Click to expand...
Click to collapse
Lol interesting would like a picture!!! ****ty england has a long way to go before dmb comes out here...if it ever does that is...
Swyped from my GT-I9100 using XDA App

Thanks for the great find, just ordered two from eBay. Can't wait until they arrive!!

very nice!

can anyone make a video about inserting the strip

sorrowrain said:
can anyone make a video about inserting the strip
Click to expand...
Click to collapse
Just a note to anyone if using a case with just a hole not a cutout(like the official sgs case) for the strap thread that 1st then the phone
Take the battery cover off
Get a needle ready. I have some fine twezzers I used
push the end of the robot cord up and grab with needle..then gentlyuse other end of needle to push it around the small plastic raised bit and make sure its secure and replace cover
I ve hung my phone over sofa and flicked it side and spun it and it doesnt come out or pull batter off

What do you guys think? White Carbon Fiber

I had a scull skin on but after awhile i got tired of it.. So i got this new one from another company. Takes a little patients and had to use my wife blow dyer but i think it looks really great.
Anyone interested in the carbon fiber version I got it from http://phantomskinz.com/htcthunderboltchromatics.aspx
you can see what they have by clicking the drop down on the top right! I search google for the promo code.. dont quote me i think it was summertime2011 or something
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I know there's another post on this topic. I don't think it was really liked. A search will turn it up, I'm on my mobile and can't find it.
http://forum.xda-developers.com/showthread.php?t=1099878&highlight=white
Sent from my ADR6400L using XDA Premium App

lmao i posted one and it was really liked before and this one is way better so i dont know where talking about.
http://forum.xda-developers.com/showthread.php?t=1070003 Black Carbon Thread
http://forum.xda-developers.com/showthread.php?t=1013803 People talking about it thread
http://forum.xda-developers.com/showthread.php?t=1042523 And my skinit thread
Searching for YOU sponsored from me personally. don't see a lot of negative here nor did i see someone showing close pictures of the white one either. I fit it in my pocket and don't want to add any bulk to my phone so personally skins suit me! As well as a lot of others.
Someone could get a clear case if the wanted and it will fit right over...
My 2 Cents

I think that looks sweet. Thinking about ordering one

That's extreme! Seems very portal-esc
If I was any good at applying these things I'd be down.

What area are you from??

very nice and clean!
i bet the texture is awesome.

I love the way it looks, how long has it been on? I'd like to know how well they hold up, they're kind of pricey and I've heard complaints about the corners peeling up. Keep us up to date on how it holds up.

I covered my KLR650 motorcycle in carbon print vinyl like this. It withstood six months of gnarly weather, dust and offroad.
Before I finally peeled it off, my bike looked like it was totalled. However, the paint underneath was flawless.
You can get a good result if you are slow and methodical. if not, it won't look so great.

Hmm, I ordered a roll of this stuff from Ebay and got it in. Looks really slick and I covered a few things to practice. But I think I need a good pattern for the Thunderbolt. Anyone have anything? Even another skin and a scanner?
Would greatly appreciate it and be willing to send someone a big enough piece for a couple of these if we can get a pattern going.
I can even send people chunks to make skins if they are willing to cover a couple bucks in shipping.

Do you think it offers much protection other than from surface scratches? Say from falls to the floor or concrete? Doesn't from the pictures and manufacturer's description.

ghrubi said:
Do you think it offers much protection other than from surface scratches? Say from falls to the floor or concrete? Doesn't from the pictures and manufacturer's description.
Click to expand...
Click to collapse
it's just a sticker so I highly doubt it does anything other than prevent some scratches.
Does look cool. How charred up does it look then its removed? That's always my worry with them

It removed no issues. I took it off so I can recut a new skin with better cleaner edges and there is no resides at all.
I bought a roll of black off Ebay, so I cut my own skin. I wish I had a good pattern.

Looks pretty cool in a something different kind of way, also storm-troopery. I personally wouldn't cover the kickstand, though.

thumbs up, i'm really liking this

[MINI REVIEW] Cheap Waterproof case.

Well I ordered it from eBay and it arrived today so as promised here's a micro review.
First impressions are not bad, I can't complain considering the price I paid for it and, for something to use whilst out walking or just using in the bath (pretty light duty stuff) etc... It will do the job quite nicely. You can use the Tab with it in the case and it works really well considering I have a screen protector on it too.
It doesn't have a cut out in the back to use the camera but it's no big deal.
I have the book cover case for my Tab, but it will not fit in the water proof case if the Tab wearing it, so you have to remove this first.
I've uploaded a video to YouTube if you want to see it in action.
And here is a bit more closer detail about it.
1) First Zip Lock
2) Second Zip Lock
3) Velcro to protect the locks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All in all, It's not bad, granted it's not a WaterBuoy or an Aquapac case but you get what you pay for, so if you want something to keep the rain off it or just peice of mind when using it on the beach (just anywhere near water really LOL) then the "eBay Special" will do the job just fine.... First ever review complete
Original Post
I was going to purchase one of the waterproof cases for my Tab from either eBay or Amazon, but has anyone here already bought one that can comment on how water tight they actually are?
Would you trust it to keep your device safe if it fell into the bath for example and could you use the camera whilst it is in the case etc etc... I'm mainly wanting one so it'll stay nice and dry whilst using it for Ordinance Survey maps whilst on walks and also if i drop it in a stream for example.
Any recommendations would be greatly appreciated if someone has bought one that is.
If no one has however, then I'll get one anyway and review it on here, in case anyone else is also interested in getting one.
Click to expand...
Click to collapse

I do not have any experience with those covers but am sure interested ina review! Please share your experience!
I do hope there is already someone worth that here!
Sent from my GT-P7500 using Tapatalk

Can you post a link to the case you want?

karib4 said:
Can you post a link to the case you want?
Click to expand...
Click to collapse
Well this is one them, however, I ordered mine from ebay.
http://www.amazon.co.uk/SAMSUNG-P7510-GALAXY-ALL-WEATHER-CELLAPOD/dp/B005EFSELI/ref=sr_1_1?ie=UTF8&qid=1327162602&sr=8-1
There is another one eBay for £30 but I thought I might as well get the cheaper one first, as it maybe just fine for my needs, if not then I'll get the more expensive one.
Either way I'll let everyone know what its like when it arrives.

From your link:
"Boxed-product Weight: 64 Kg"
I really hope they made a mistake here . But even with forgetting the decimal and accidentally writing Kg instead of pound or something it would be quite heavy, as 6.4 pounds are almost 3 kilograms.

The product description does not provide much but I would be surprised if you will be able to use the Tab while in the case. It looks to me to be a waterproof cover that will protect the tab if it gets dropped in water but will require you to remove the tab to do anything.
There are excellent waterproof cases on the market for Apple products. I have one for my iPhone that offers full functionality while in the case and will protect the device even if it is submerged in 8 feet of water for over 24 hours, (I tested it). The manufacturer is LifeProof. They do not have a Tab version yet but are considering it. Otterbox is another manufacturer with a good product for iPhones and iPads.
The problem for manufacturers considering making products for the Android market is that Android tablets come in many sizes and shapes and are constantly being modified. By the time they produce the tooling to make a case for a particular device, that device is off the market. Apple is a much slower moving target so this is where the resources go.
Bob

dsafety said:
It looks to me to be a waterproof cover that will protect the tab if it gets dropped in water but will require you to remove the tab to do anything.
Click to expand...
Click to collapse
Nope, fully submersible and can you can use it just fine with it in there, Just updated the first post with a micro review.