hey guys i am having some issues with my phone just a few weeks ago my usb debugging stopped working and i am trying to figure out whats going on ive tried unistalling the drivers and nothing and i put in a new rom and clean wipe and nothing the charging connected to computer works and it pops up the usb connected but does not mount and adb shell mount doesnt work either can someone help...
Just to clarify...is the adb device not being recognized? If so, I had an issue with that....did you install the drivers on another computer? That's what I did and it worked. Also, it had been a while since I reinstalled windows and I needed to. So I did. And it been working both my computers ever since.
Related
For some odd reason, I lost adb functionality (i.e. any adb command issued receives "error: device not found"). I looked in Device Manager and noticed that MyHTC was gone! I looked at my phone and USB debugging was enabled and in charge only. I could put it in USB Drive mode and the PC would recognize it as a USB Mass Storage Device so that I could exchange and view files but no adb.
I searched and searched on this issue for hours and installed over a half a dozen "androidusb.inf" driver files several times over. Every install generated the Code 10 error where Device Manager was lacking some information from the driver file and could not start the device. I reinstalled HTC Sync and gave that a try...nothing. Downloaded USBDeview and uninstalled all HTC drivers including the HTC Android USB Device and tried again to no avail. WTF?! What else am I supposed to do?
Well, in a "what the hell, let's give it a try" kind of moment, I decided to toggle the USB debugging off and then back on (and yes, it was checked and on the whole time). WORKS!!! WHAT THE CRAP?!! MyHTC is back in Device Manager and everything is back to normal. I'm glad but irritated!
I share this story in hopes that if someone else stumbles on this problem, they will not have to go through the same headache as I did. Just thought this was odd considering how many times I have plugged and unplugged and never had any problems with adb.
Toggle USB Debugging....so simple. *rolleyes*
Same Issue
I've got the same issue on my EVO 4G. Just installed the latest CM7 and now it tell me device not recognized. If I manually install the drivers it gives me the same code 10. I can't bring up the phone as a storage device and toggling the debugging is not working. Any ideas?
SillyJay said:
I've got the same issue on my EVO 4G. Just installed the latest CM7 and now it tell me device not recognized. If I manually install the drivers it gives me the same code 10. I can't bring up the phone as a storage device and toggling the debugging is not working. Any ideas?
Click to expand...
Click to collapse
You installed the hboot drivers correctly?
Boot into recovery, with usb debugging enabled, connect to pc, it should install the drivers.
Still the same
Even when I reboot into recovery it still gives me "USB Device not recognized." I previously had MikFroyo on my phone with no problems. I'm at a loss.
SillyJay said:
Even when I reboot into recovery it still gives me "USB Device not recognized." I previously had MikFroyo on my phone with no problems. I'm at a loss.
Click to expand...
Click to collapse
You most likely have a bad cable, do you have another one you can try?
Possibility
Not at the moment but that may explain it. Still seems weird for it to just go out right as I change to CM7, but still a possibility. I am going to run and grab my other cable. Thanks for the advice.
No Luck
The new USB cable didn't fix the problem. Also, in device manager, even with the driver installed its labeled as "unknown device."
If I boot into hboot the computer recognizes it.
**update: After rebooting from the hboot, my phone is recognized by the computer however, a disk drive is not coming up in "my computer." I have USB storage turned on but Im not getting anything.**
Any help would be much appreciated!
Sad Day
Apparently the Micro USB port on the bottom of my phone is going bad... I talked with some other people who've had the same problem. HTC knows that the ports aren't very sturdy as well. Well... sad day for me.
Also if you're getting the notice from windows saying that you your device will run faster in a 2.0 usb port and you know the port is 2.0 ... chances are your port is going bad as well.
*****UPDATE*****
Flashed to MikFroyo and none of the above stated problems. I would venture that it was CM7 but apparently everyone else is able to use it so who knows.
i had my phone working perfectly for the past month and all of a sudden my computer does not recognize my phone and i have no idea why. i tried different usb cables an same problem. can anyone please help
mbrito41712 said:
i had my phone working perfectly for the past month and all of a sudden my computer does not recognize my phone and i have no idea why. i tried different usb cables an same problem. can anyone please help
Click to expand...
Click to collapse
I had this problem where it wouldn't recognize my phone with USB debugging on. Make sure you are using the same port you installed the drivers on. If that doesn't work then go into control panel>system>device manager and see what it is connected as. It should be Samsung Android in USB or OTHER. Click on that and hit Update Drivers and choose from Windows Update and let it do it's thing....takes a while. Reboot and you should be good.
Hi All, I've got a USB connection problem with my Galaxy Nexus. When I connect it to a computer, it will start charging, but doesn't show that it's connected to a computer and the computer doesn't show that a device is connected. I've tried on a few different Windows machines and don't get any change in the device manager. There is no "unknown device" nor device with an error. I've been searching the Internet and this forum, but still can't find the problem after a couple of days. Here's some details and things I've done:
I did not install the "force fast charge" kernel mod.
I've tried a couple different cables and verified that the cables worked with my wife's Galaxy II.
I've tried several different computers.
I've tried MTP and PTP storage options.
I rebooted everything several times.
I drank heavily.
I tried a factory reset.
I updated Windows Media Player to get the latest MTP software.
I installed drivers packages even though it never gets to the point of installing drivers.
Does anyone have any other ideas before I smash this thing with a hammer?
Does anyone have any ideas? At this point, I'm thinking there is a hardware problem.
Go into Menu -> System Settings -> Developer Options -> Turn on USB Debugging.
Not a guarantee, but something to rule out.
I've got USB Debuging on. Thanks for the reply.
Can anyone help? I'm having the same exact problem. My phone charge but is not detected by my computer. I am having this problem right after flashing AOKP ROM B35. This is very important, one mistake and my phone will be bricked as a computer to phone is so important !! There is nothing detected at all under device manager. Tried it on several laptop to make sure it isn't just my computer.
someone?
Uninstall the drivers you have for the s2. Reboot and install the official drivers for the galaxy nexus. Reboot. Then try.
If that doesn't work... let the phone load a while and just keep trying other ports on the computer. I saw this with my other gnex that it would take a while to realize a USB to be connected. Also make sure the USB is in completely... don't jam it in but make sure you know its All the way in. ( no pun intended) What's funny is my gnex will detect it instantly... but the other one takes a few tries.
Sent From My Sprint Galaxy Nexus via Xda Premium
Thank you dude. It doesn't work. Prior to installing this rom, my nexus is detected instantly. There is something wrong with the process i root or something. Now i can't do anything as It is not detected by my computer. Someone please help.
Indeed is the rom that is causing the problem. I opened NEXUS toolkit and rebooted my phone into boot image. It will sense it and i can operate from there. I've restored to factory and now my phone is being detected. I hope the thread starter gained something out of it too
Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.
Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.
so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??
FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.
yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going
OP
Hope OP will have the same luck as me...pray to the Android gods...
Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Hey guys,
trying to root this beauty and Im running into problems. Been testing around for about 4 hours now, no solution.
Im Running Windows 8.1 and had a few other devices installed before. Cleaned up the drivers with the device manager and USBDeview.
At first I tried the Nexus Root Toolkit, simply followed the instructions until the final checkup. Device is connected in ADB mode but not authorized. (Authorization does not popup on N5x)
Also tried all different driver versions.
Then I cleaned all that stuff again and tried to go the manual way through the SDK. Same Problem, device is recognized but no authorization and no pop-up.
Im using a tronsmart Micro-USB to USB-C adapter and already tried two different cables and many different ports.
Also tried switching through the USB connection modes and toggling debugging on / off.
Im at my wits end here, anyone got a solution?
i have the same issue on n5x,
cant get recognized on adb at all or usb debug
Rooted without problems from my gf's Laptop. So I guess it's an issue with the PC / drivers.
I have latest SDK updates. And USB debug on. OEM unlock on many options on and off. Nothing works