Develop Bugs

[Case][Review] TPU-cases Matte back black

This is a review of a case made by TPU-cases.com of their Matte back black case.
TPU-cases.com: http://tpu-cases.com/index.php?main_page=product_info&cPath=36&products_id=147
1st impression:
I received the case prior to getting my Epic 4G Touch, and after opening it up and taking a brief look, I was rather impressed by the case. The materials used are good quality and it looks well made. Initially I did notice that the surface of the case is a little slippery, but its nothing too bad. Overall I had a very good 1st impression of the case.
There was a screen protector included but I fail pretty badly trying to put those on. I normally don't use a screen protector on my phones, but I wanted to give it a try for the sake of review purposes and I was unable to get it installed correctly. This may be user error, but it looks like it may be a combo of an error of mine and the screen protector... it was addressed here by the owner of TPU-cases, OneStepAhead.
After I got the phone:
I received my Epic 4G Touch at 10am on the 16th, launch day. After getting everything set up and activated through Sprint, I installed the case before leaving the store. I was very impressed at how well the case fit, it was a perfect fit. Installation was very easy as well, I had zero trouble getting the case on properly.
One thing I noticed about the phone is that the camera on the back was going to come in contact with whatever surface you lay the phone on. I noticed that right away and was instantly hoping the case would solve that issue, and it did. When you install the case, it sets the camera back in a little so that the lens of the camera doesn't make contact with the surface, which I loved. Also on the front of the phone, the case provides a small lip around the whole phone, which provides a little protection for your screen if you were to set it on a table with the screen down. Overall this helps protect your phone and TPU-cases did a good job.
When I was trying to decide on getting a case for this phone, I was worried about the case taking away the benefit of the thinness of the device, which was a main selling point of the phone for me. I was pleasantly surprised that this case doesn't add much thickness at all, its only very minor and it still preserves the overall slim profile of the device, which is great.
I was also wondering about use of the ports and buttons on the phone with the case being there. The headphone jack, power button, micro usb port, and microphone are all easily accessible and unaffected. I did plug a Samsung headphone into the 3.5mm headphone jack without a problem. The power button is easy to press and is uncovered. There is no problem plugging the micro usb in to charge... the speaker and microphone is uncovered as well.
The only small downside to this case is the volume rocker. When I press the volume rocker to adjust the volume, you definitely have to press it a little harder than normal, and there is a cover over top of the buttons. You can still control the volume, it just is not as easy as I would like it to be. This is not anything that is going to stop me from purchasing the case, and as a whole it's pretty minor to me.
Pictures:
I took 4 pictures to hopefully show the points I've made in this review for you all. I apologize is the quality of the pictures isn't great, it was taken with another cell phone camera as I was taking pictures of the new phone. If anyone would like additional pictures of the case I'd be happy to take them.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Conclusion:
As a whole, this case I got from TPU-cases.com is great, and I'd highly recommend taking a look. The value you get for a very small price is awesome and I will be buying more cases from them (I like to change cases from time to time). Thank you TPU-cases for providing a great product. I give TPU-cases a 9/10 and the only point taken away is for the volume rocker.
If anyone has any questions I'd be happy to answer.

Just ordered this case on Amazon last night. It's supposed to be delivered on Tuesday. Thanks for the review, now I know i'll be happy with it

ordered one today
i just ordered one these today and am looking forward to receiving the case soon.

I ordered the smoke matte translucent model. Can't wait!

That looks great! My smoke case is in the mail. Can't wait to get it, my phone is nakey lol. From your review, ill definitely be buying more colors

Yeah I am very happy with the case, hope you all enjoy yours

I like the TPU case too and I will get one first as soon as I get my phone from letstalk, grrrrrr.
Eventually I want a casemate barely-there cause I prefer hard shell...but these are excellent cases, especially for the money.

I have one for my Evo and I too can't wait for an ET4G version
mrpickem said:
I like the TPU case too and I will get one first as soon as I get my phone from letstalk, grrrrrr.
Eventually I want a casemate barely-there cause I prefer hard shell...but these are excellent cases, especially for the money.
Click to expand...
Click to collapse
mines in the mail too, after seeing these pics i am feeling pretty good about the case although it feels nice....and a little naughty going completely naked
puff601 said:
That looks great! My smoke case is in the mail. Can't wait to get it, my phone is nakey lol. From your review, ill definitely be buying more colors
Click to expand...
Click to collapse

How well does this protect your phone against being dropped?
Sent from my SPH-D710 using xda premium

firemedic624 said:
How well does this protect your phone against being dropped?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I haven't dropped it yet, but just going off the case itself, I think it would survive a normal drop. I'm not sure about a 10 foot drop onto concrete or worse, but I'd imagine it would stand up ok for most drops. The material used to make it is very flexible but sturdy on the phone. My only concern for drops would be the screen, and if it was dropped on an angle like a curb.

Yeah, that's my biggest concern. I guess it's better than going naked. I dropped my Evo and cracked it corner to corner. That was a bad day.
Sent from my SPH-D710 using xda premium

I was about to order three of these but the black matte one is already out of stock...waiting.

firemedic624 said:
Yeah, that's my biggest concern. I guess it's better than going naked. I dropped my Evo and cracked it corner to corner. That was a bad day.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
A user on Androidforums posted that his daughter knocked his phone off the dining room table and it dropped about 3.5 feet. He had a TPU case on it and it came out perfectly fine with no damage.
JBNAquatics said:
I was about to order three of these but the black matte one is already out of stock...waiting.
Click to expand...
Click to collapse
Yeah I saw that, must be pretty popular choice. Hope they get more in soon for ya.

Thanks for this! Glad to hear you are happy with the case. I don't know if anyone mentioned it in this thread, but the screen protectors we included are not cut properly. They are cut to the exact size of the glass which makes them near if not impossible to install without the edges peeling up. I'll be sending replacement screen protectors to those that request them once I receive the fixed ones. It's disappointing, it's the first time we included screen protectors with our cases and the first time using this screen protector supplier. Live and learn I guess. Please don't send me messages about the screen protector yet, I'll post something about it here and on our website closer to the time I'll have replacements. For the time being I've just removed any mention of the cases coming with screen protectors so future customers wont have any expectations of receiving one with their case (although they still will receive one).
---------- Post added at 11:23 AM ---------- Previous post was at 11:20 AM ----------
cds0699 said:
A user on Androidforums posted that his daughter knocked his phone off the dining room table and it dropped about 3.5 feet. He had a TPU case on it and it came out perfectly fine with no damage.
Yeah I saw that, must be pretty popular choice. Hope they get more in soon for ya.
Click to expand...
Click to collapse
This is the 2nd time making the matte cases, the first time we did it for the Evo 3D after receiving a ton of requests for. They ended up not selling very well though. I think I had 500 of the matte black made for Evo 3D and I still have 1/2 of them 6 weeks later. The Epic 4G Touch on the other hand I sold out of 500 before the phone was even released! I'm telling people 9/23 but I actually think they will be in on Tuesday or Wednesday. Sorry for the inconvenience.

The 3D just was a bad draw. If you had made some for the OG evo you probably would have seen better numbers. I am going to guess the ones for the ET4G will fly off the shelves and I can't wait to get my case

Edit: Some of your products have Prime shipping while others don't. Just curious on why that is because I have a Prime account hahaha

i ordered the high gloss black from amazon. anyone have opinions on high gloss? or should i cancel and get matte black or the high gloss translucent

Love the Black Matte case. But like stated , the screen protector doesn't fit well. Phone feels good in the hand with the case.

I got the glossy smoke one on now I dig it
Sent from my SPH-D710 using XDA App

got the gloss smoke case, i really like it but I have found that the volume buttons are very hard to press. I'm hoping this will be fixed over time. Other than that great case.
That screen protector thing had me puzzled for a while, it all makes sense now.

SGP Reventon Yellow Neo-Hybrid Case (REVIEW & PICS)

OK, so I recieved my SGP Neo-Hybrid case in Reventon Yellow this afternoon.
First impression was, WOW that looks nice!
Extended battery is a for sure NO, don't even try it.
(this was meant for the GSM model with the slimmer battery)
I love the look of this case, and it feels great. But the fit is very tight. At first when i put it on it didn't go over the the top of the screen and the buttons didn't align that well. The Vol - button was depressed so when you turned on the phone and unlocked it the volume would just go all the way down and stay there. Then i took the case off and started to pull on it and try to stretch it out a bit and it helped a little. I finally got it to fit sort of nicely. I'll leave it on for a few days and hopefully it will magically change a bit and fit nicer lol
Overall the quality is very nice. Looks are great, especialy in the Reventon Yellow. This case doesn't add a whole lot of bulk to this phone, and actually feels very nice in the hand. the cutouts for the rear speaker, charger and headphones port are very nice, especially the rear speaker hole. the voluem and power button finally fit a little better after me fiddling with and it stretching it and moving it around. The yellow is a very nice shade of yellow, not too bright and not too dark, perfect in my opinion and i don't really like yellows. It's kind of like a lamborghini or ferrari yelllow, as a member on here mentioned in a thread.
and here are a few pics.....
will try to take some tomorrow in daylight to see if i can get a better visual of the yellow color and fit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These pictures are when i put it on the first time, it does fit much better now. I will take some better pictures tomorrow hopefully
Thanks for reading and if you have any questions, please comment or post them.
UPDATE!!!!!
Ok so a few days ago i decided to modify my neo hybrid to fit a little better.
Those of you have have seen or heard of SGP's neo hybrid EX series cases, they dont have the rubber casing on the back of the phone where the battery door cover is, soo.........................
i did this
And with the extended battery and cover....
and to answer some questions,
Yes it does have a lip, about one mm
It does fit a little better, but still doesn't go over the top of the bezel but it fits much better around the buttons on both sides
And it does feel and look good still, i think but i did send an email to SGP asking if they will be making some neo hybrids for the CDMA version and will post bak soon as i hear from them

That is a pretty sexy case!
Thanks for the pics!

Looks really cool!

Thanks for buying this to try out. I'm curious if it fits any better now after wearing it for some time

Does it fit with extended battery?

does the case protect the screen when you place it face down.
i can't see in the pictures if there is a lip there.

Ugh. I want this case. Wish it fit the Verizon model *tear*

I just ordered the yellow and am thinking of getting the gsm extended Battery. I understand that with the gsm extended battery with cover, it won't fit this case. But if i remove the back cover and just placed the nexus with extended batt directly into the sgp rubber back, would the whole thing fit?

A M A Z I N G

I ordered one in silver and one in white a few days ago as well. They should be here soon. I'm wondering though, if these play nice with wet application screen protectors. I have a ZAGG and I hate it, so I ordered some SGP Flex screens, but people have been saying the XO skin is the best so far, so for $15 I might get one of those as well.
But I have to decide whether I want the full screen or the case-fit screen.

sliderocket22 said:
I ordered one in silver and one in white a few days ago as well. They should be here soon. I'm wondering though, if these play nice with wet application screen protectors. I have a ZAGG and I hate it, so I ordered some SGP Flex screens, but people have been saying the XO skin is the best so far, so for $15 I might get one of those as well.
But I have to decide whether I want the full screen or the case-fit screen.
Click to expand...
Click to collapse
this case does work well with the wet screen protectors. I have the xo skin and at first i thouhght it was great, but now im likeing it too much. It got a little more rubbery than i thuoght it would and the finger prints dont come off as easily so i have to use a wet paper towel to wipe it clean. Im thinking of getting the steinheil oleophobic one to try out.

marshy73 said:
I just ordered the yellow and am thinking of getting the gsm extended Battery. I understand that with the gsm extended battery with cover, it won't fit this case. But if i remove the back cover and just placed the nexus with extended batt directly into the sgp rubber back, would the whole thing fit?
Click to expand...
Click to collapse
i tried that with the verizon exteneded battery and i wouldnt do that if i were you. It has some play and the battery might come off the prongs and keep shutting off ur phone

k20igor said:
this case does work well with the wet screen protectors. I have the xo skin and at first i thouhght it was great, but now im likeing it too much. It got a little more rubbery than i thuoght it would and the finger prints dont come off as easily so i have to use a wet paper towel to wipe it clean. Im thinking of getting the steinheil oleophobic one to try out.
Click to expand...
Click to collapse
Good to know. I am not a huge fan of wet apply screens, but that's what we get for edge to edge coverage right now. If the Flex doesn't work, I'll get some ultra oleophobics instead. Anything really crystal clear works for me.
Sent from my iPhone 4 using Tapatalk

k20igor said:
i tried that with the verizon exteneded battery and i wouldnt do that if i were you. It has some play and the battery might come off the prongs and keep shutting off ur phone
Click to expand...
Click to collapse
Hmm, perhaps placing something inbetween?

sliderocket22 said:
Good to know. I am not a huge fan of wet apply screens, but that's what we get for edge to edge coverage right now. If the Flex doesn't work, I'll get some ultra oleophobics instead. Anything really crystal clear works for me.
Sent from my iPhone 4 using Tapatalk
Click to expand...
Click to collapse
I absolutely love my flex. Its really smooth to the touch not grippy at all. It has a small amount of texturing, not quite orange peel but a little texture non the less, but its only noticeable with the screen off. All in all its my favorite wet apply protector out of all the ones I've owned.
Sent from my Galaxy Nexus

skyhigh2004 said:
I absolutely love my flex. Its really smooth to the touch not grippy at all. It has a small amount of texturing, not quite orange peel but a little texture non the less, but its only noticeable with the screen off. All in all its my favorite wet apply protector out of all the ones I've owned.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
The SGP Flex screen protector? I have the XO Skins and i loved it the first 2 weeks and now its getting a little too grippy for me and fingerprints gget left behind like no other. can post a pic or two of it on your phone and is it edge to edge or does it not go all the way to the edged, because i love how the XO goes all the way to edges. Thanks in advance and how long have you had your screen protector on for?

Awesome! The mod makes this exactly the case I was looking for: something very similar to the "bumper" cases for the iPhone. Shock absorbing all around the outside and not covering the back.
If anyone has pictures of one on in black, white, or grey I'd really love to them. Looks like the grey is lighter than the metallic color of the GN, too bad it doesn't match.
k20igor - Is it simple to "mod" this case like you did, does it just come apart with some prying? How well does it fit once mod'ed? You pictures at the end were with the 2000 mAh extended battery and cover off eBay, correct?
Has anyone fit one of these on a GSM (I9250) model? Possibly with one of the eBay 2000 mAh extended batteries and covers off ebay?

phishie said:
Awesome! The mod makes this exactly the case I was looking for: something very similar to the "bumper" cases for the iPhone. Shock absorbing all around the outside and not covering the back.
If anyone has pictures of one on in black, white, or grey I'd really love to them. Looks like the grey is lighter than the metallic color of the GN, too bad it doesn't match.
k20igor - Is it simple to "mod" this case like you did, does it just come apart with some prying? How well does it fit once mod'ed? You pictures at the end were with the 2000 mAh extended battery and cover off eBay, correct?
Has anyone fit one of these on a GSM (I9250) model? Possibly with one of the eBay 2000 mAh extended batteries and covers off ebay?
Click to expand...
Click to collapse
I got my silver one on my GSM Nexus today. I don't have the 2000 mAh batteries yet, but that is on the way. I must say this is one of the best cases I've ever owned. I went and ordered one for my Galaxy S II and I'm looking for them for other devices as well. Once I get my extended battery, I'll see how they go.
Sent from my Galaxy Nexus using Tapatalk

skyhigh2004 said:
I absolutely love my flex. Its really smooth to the touch not grippy at all. It has a small amount of texturing, not quite orange peel but a little texture non the less, but its only noticeable with the screen off. All in all its my favorite wet apply protector out of all the ones I've owned.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Does it get dents in it? My ZAGG I just took off in favor of a Verizon anti-glare (I HATE anti-glare) looked like someone rolled a golf ball all over the screen. I can't stand ZAGGs anymore, I only got it for some protection til my Neo Hybrid came.
Sent from my Galaxy Nexus using Tapatalk

k20igor said:
The SGP Flex screen protector? I have the XO Skins and i loved it the first 2 weeks and now its getting a little too grippy for me and fingerprints gget left behind like no other. can post a pic or two of it on your phone and is it edge to edge or does it not go all the way to the edged, because i love how the XO goes all the way to edges. Thanks in advance and how long have you had your screen protector on for?
Click to expand...
Click to collapse
It does go edge to edge, it leaves about a 1 mm gap if that. I can't post a pic as this is my only camera . I've had it on for about three weeks and its still superb in terms of finger gripyness. My fingers glide over it. You also get two in the package unlike some other screen protectors.
sliderocket22 said:
Does it get dents in it? My ZAGG I just took off in favor of a Verizon anti-glare (I HATE anti-glare) looked like someone rolled a golf ball all over the screen. I can't stand ZAGGs anymore, I only got it for some protection til my Neo Hybrid came.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
It does have a slight texture but nothing compared to any zaggs I've had. It doesn't really dent that I can tell. All in all a great screen protector.
Sent from my Galaxy Nexus

Seidio Surface case review (w/pics)

Hey fellow sgs3 owners,
I just received my Seidio surface case and I'm here to review it. I chose the blue because it is my favorite color and it looks awesome on white, and no I do not like pebble blue at all lol.
When I first opened the package and took everything out I noticed how sleek the case is. The case is broken up into 2 parts (top, bottom). The inside of both parts has a very nice suede type padding as "shock absorption" (idk if it is suede or mesh or whatever but it feels nice ). To get the case on the phone it is quite simple, you slide the top part of the case thru the top of the phone and the bottom part thru the bottom of the phone until both ends meet in the middle. You don't have to force anything and it fits perfect with no space in between ends and no rattling of the phone. Perfect fit.
The feel of the case reminds me of a stronger and more scratch resistant material than my htc one s. It is definitely scratch proof and feels solid in my hand. Gone is the feeling of holding plastic while I am using my phone. The case covers the entire back, top, and bottom of the phone. It even has a raised bezel around the front side so you can set the phone down on any surface facing down and not worry about the screen getting scratched. The cutouts of the case are perfect. The volume and power cutouts are angled so you can get to them without a hassle. The mic, noise cancelling mic, and charger cutouts are cut to perfection with no crazy thickness that would make it difficult to access.
The camera, flash, and speaker cutouts are nearly perfect too. Seidio went with a nice design that covers the bezel of the camera too so your lens is 100% protected from fall and surfaces. Again this case was cut out to perfection.
The one grip I have about the case is that it's a pain in the pass the a** to take off. I have had the case on for about an hour now and I am still trying to take it off I saw a video on youtube where someone says "it takes a bit of pressure to take off" that's an understatement. I feel like I will need a hammer, a machete, and a crowbar (All obvious exaggerations). But seriously I feel like if I apply anymore pressure getting this thing off I'm going to break something lol. This can also be a good thing. you don't have to worry about the case coming apart on impact if you drop it. Like I said it's solid.
This case doesn't add much bulk to the device. It still feels slim and sexy in my hands. I'm not sure about the size of the case but seidio probably has it on their website.
If you are looking for the best protection you can get while maintaining the sexiness of your device I would highly recommend this case. Just be ready for war when you want to take it off.
-not sure why the pictures lost quality when I uploaded them, sorry-

Update I figured out how to take it apart. It's tricky but once you learn how to its easy. You don't necessarily hold the sides and pressure the middle tab. You have to press down next to the middle tab with a bit of pressure without holding the sides and try sliding off. Again tricky but do it once and you will be able to do it again and again.
Sent from my SGH-T999 using xda app-developers app

I bought this same setup from Best Buy but is wasn't labeled as Seidio on the back. I don't have it in front of me at the moment since I replaced it with a Commuter. The case is nice but to thin for me, I fear dropping it from any height since it is slim.
In regard to taking it off I found that if you put you fingers where case opens for the power and volume button and press down on the back it comes off very easily.

This case works great with the Samsung desktop dock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from my AOKP galaxy s3

That dock looks nice. Have you tested the nfc with the case? I'm waiting on my nfc stickers to come in the mail to test it.
Sent from my SGH-T999 using xda app-developers app

I have the same case, excellent review by the way Good to know it works with the dock. As far as NFC goes, i was able to easily use S-beam which is powered by nfc, so i would assume the stickers would work as well.

I had this case on my HTC inspire and really liked it....had to switch to the defender after breaking my holster clip while climbing in the attic. Sad day lol. It's a solid case I never had problems with it but....my buddy couldn't get hers to stay together had to exchange a couple times.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Neverendingxsin said:
I have the same case, excellent review by the way Good to know it works with the dock. As far as NFC goes, i was able to easily use S-beam which is powered by nfc, so i would assume the stickers would work as well.
Click to expand...
Click to collapse
Thanks, I just received my nfc tag stickers from tagstand.com and can confirm nfc is unaffected by the case
I seriously recommend this case to all.
Sent from my SGH-T999 using xda app-developers app

Thanks for the review. Like someone else said, I have the version of this case that they sell at Best Buy. I love the case and have been using it for my BB, Evo and now my S3. It was the first case, that I looked for when I got my S3. I am looking at getting an Otterbox only because I broke my OG Evo's screen when it dropped (mine you the phone was almost two years old and had been dropped before), I just dont want that to happen to my S3.
Thanks also for telling us that it fits in the dock from Samsung. Does the one that you posted pictures with also charge the battery (i know it charges the phone but not sure if it charges a second battery as well). I bought the dock from Sprint that allows you to charge a second battery (doesnt charge the phone at all, only the battery). I can tell you that with that case, it does not fit on that dock (it barely fits in landscape mode but you can clearly see that its not meant to have that type of case).
Thanks again for the review.

I have the same exact case with the holster... and I must say my friend... your review is quite correct in all aspects... and I will second that it is indeed a very sexy addition to my SGS3
Sent from my SGH-T999 using xda app-developers app

I too will co-sign this brand of cases. I have one on my Epic 4G, my girl's Epic 4G, and my EVO 3D. The case and holster combo available from Best Buy is decently priced ($30-$40) and they protect the phone well while adding minimal thickness and weight. I know my Surface Case has saved my EVO 3D from quite a few nicks and scratches.

You're welcome guys.
I've been rocking the case since this post and still have no complaints. This has been a nice investment for me. I no longer fear of putting my phone down on my work desk either face up or down and if my boss comes I I don't mind throwing the phone in my desk either. Win win!
Sent from my SGH-T999 using xda app-developers app

I have some questions about this case hopefully you guys can help me with.
Can anyone comment on how slippery this case is and compare it to the slipperyness of a naked S3?
For those of you with the holster, does it hold the phone and surface securely?
Thanks everyone.

saj222 said:
I have some questions about this case hopefully you guys can help me with.
Can anyone comment on how slippery this case is and compare it to the slipperyness of a naked S3?
For those of you with the holster, does it hold the phone and surface securely?
Thanks everyone.
Click to expand...
Click to collapse
I feel that it adds a little more grip to the phone, at least i think it does. I found the phone to be too slippery when naked.
And yes it does hold it securely

saj222 said:
I have some questions about this case hopefully you guys can help me with.
Can anyone comment on how slippery this case is and compare it to the slipperyness of a naked S3?
For those of you with the holster, does it hold the phone and surface securely?
Thanks everyone.
Click to expand...
Click to collapse
Without the case my galaxy would slide across my wooden desk. The same desk you see in the last picture I posted. With the case it no longer slides. It barely moves when I try to push it across so yes it does add some grip.
Hope this helps
Sent from my SGH-T999 using xda app-developers app

This is a pretty good case. I did a review on the convert combo case over at banetech.WordPress.com check it out if you want to see video action for the case. The convert combo case includes the surface case as the set and has the option of adding more protection that ends up looking something like the Otterbox Commuter Case but seems more protected like the Defender series.
But yeah I was struggling a lot with getting the surface case off. I ended up taking a thin blade to the middle to wedge the case apart. After that time though it wasn't as hard to get off. But that assures the case will not come apart if dropped.
Sent from my SCH-I535 using Tapatalk 2

angie4u said:
that android sticker in the back of the case is soooo cute! since the OP's pics are not showing it, I'm guessing you put them on yourself?? can you tell me where you bought them from? thanks!
Click to expand...
Click to collapse
Yes i added the android sticker just do a Google search for android stickers . Com.
from my AOKP galaxy s3

I believe androidswag.com has stickers like that.
Sent from my SGH-T999 using xda app-developers app

I have the same surface case in black, below are my observations:
1) If you are using a screen protector (I use bestskinsever.com) beware, the case fits so snugly it rips the screen protector off as you slide it on.
There is a way around this:
First, let the screen protector set for a while before slipping on the case, a day or two.
Second, I removed the suede material, its very thin as it is, but this helped me fit the phone perfectly as I used the full body kit skin film on the front and back of the phone. The suede material is so thin, I highly doubt it offers any impact protection, I think its there to prevent the back of the seidio case rubbing and scratching the back plastic cover, but if you use a full body skin it doesn't matter.
2) It is a ***** to get the case open the first few times, but after a while it does get easier to open, I guess it needs to be broken in a bit, but that doesn't mean it rattles or anything, it still very snug.
3) This is a very good case, I really like it. It is minimal, covers the phone well (including the bezel on the screen) and has great grip.
4) I have had it for about 2 weeks now and the finish is staying on and hasn't started to peel off, which was a concern of mine.
5) It also hasn't scratched so far and is very easy to clean.
6) Overall I recommend it, but jut beware if you are using screen protectors, follow what I did and you should be fine either way.
Hope it helps!

Thanks for those tips. I'm currently still debating getting a screen protector. I have an issue with how screen protectors look and feel to me. I've been carrying around a microfiber cloth with me and it's been keeping my screen crystal clean. I know sooner or later a hair scratch will come so I have to decide what to do fast. At least I know I can make it fit.
Sent from my SGH-T999 using xda app-developers app

Opinions on a case with kickstand

Hey folks. Frequent XDA forumer here and new owner of a SGS3.
Unfortunately, my story begins with tragedy. I got my SGS3 just a few days ago, and last night it slipped from my pocket while I was sitting in a chair and fell 2 feet onto concrete. BAM, hairline crack along the entire length of the front glass. I have to say, I'm not too pleased (my Epic 4G took worse tumbles than that without a case) and I'm ordering new glass from eBay to replace myself because the $178.61 Samsung quoted me, and the $150 deductable I'd have to pay Asurion are both complete rip-offs just to swap the front glass. I'd also just like to go on record and point out that Samsung really dropped the ball not rubberizing the back of the SGS3; the phone is beautiful but like a wet fish to handle. I suspect it wouldn't have slipped out of my pocket had it been rubberized like my Epic.
So, anyhow, enough of my bellyaching. Once I finish replacing the front glass, I need to get this thing some protection. I've looked around on eBay and seen a lot of candidates (both brands I recognize like Otterbox and UAG and otherwise) but I'd really like to hear from you guys what you think.
Here's what I'm looking for:
As thin as possible
Rubberized back or TPU shell
Has a kickstand
No extended battery
Let me know your recommendations!
EDIT - I've now been through all ~75 pages of the "Post a picture of your case along with your S3" thread and, coupled with the suggestions from this thread, I've got this running list going of options:
Qmadix Holster Shell Combo (Metalix product line)
SEIDIO ACTIVE with Kickstand
Case-Mate Pop! with Stand
Cruzerlite Spi-Force
Trident Kraken
Fosmon/GreatShield Hybrid (A lot of alternative styles with kickstand here)
GreatShield Snap Stand
Tomaxx Silikon TPU

http://www.youtube.com/watch?v=7TZA84DV754

CZ Eddie said:
http://www.youtube.com/watch?v=7TZA84DV754
Click to expand...
Click to collapse
Awesome, that's essentially what I'm looking for; some minimal protection that's rubberized and sporting a prop. My only complaint about those Qmadix Metalix models is that visually I'm not really digging the style. They're a little too flashy; I was hoping to see something just all black. But who knows, maybe I'd get used to it. I was glad to hear that the kickstand is very durable, as a lot of the no-name brands I see on eBay have props that look very flimsy.
Would love to see any other suggestions, and thanks again!

I have this: http://www.amazon.com/Aduro-Holster...qid=1352610675&sr=8-6&keywords=galaxy+s3+case
The case its self feels nice but it doesn't protect enough. My screen still broke :crying: with it because it only covers the sides and not the top and bottom. The kickstand is utter **** and falls over when you breathe because the kickstand barely sticks out.
tl;dr: it blows

Electrofreak said:
I was hoping to see something just all black.
Click to expand...
Click to collapse
http://www.ebay.com/itm/310479829942?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

CZ Eddie said:
http://www.ebay.com/itm/310479829942?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Click to expand...
Click to collapse
Perfect. I didn't see anything like that on the Qmadix website so I didn't bother to look any further. Gotta love eBay!
EDIT - Ah, I see it now, it's listed separately due to being a holster/shell combo.
http://www.qmadix.com/snap-on/holster-shell-combo-samsung-galaxy-siii.asp
EDIT 2 - Though the prop looks a bit flimsier on this Case Mate model, it does look like it protects a bit better due to having an edge that comes around the edge of the phone, which does add a bit of bulk. Anyone have this case?
http://www.ebay.com/itm/New-Case-Ma...A%2BFICS%2BUFI&otn=21&pmod=221097898397&ps=54

I'm currently using a Seidio Active case, which has a sturdy kickstand, good protection, plus looks really nice. Really liking it, haven't changed cases since I got it
Sent from my GT-I9300

This is what I am using:
http://www.amazon.de/tomaxx-Halteru...r_1_39?s=ce-de&ie=UTF8&qid=1352640008&sr=1-39
Cheap, but at least it offers some kind of screen protection, since it envelops all sides of the phone. In my opinion a case that leaves top and bottom unprotected is just useless since those are the areas your phone will most likely hit when it drops.
And it protects the screen when you put it on a table with the screen facing down.
The case has soft sides but most of the back and three of the sides are hard plastic. Only the bottom left corner is the same "soft" material like the sides are. Buttons on the sides are encased too, so no lint or water will enter there. Still they are working pretty well, need a little more pressure though. At least your phone won't activate accidentally in your pocket as easily as it does without the case.
The soft material is some kind of hard silicone or maybe that's what they call TPA(haven't yet figured out what that is). It has a rubbery touch and makes the otherwise slippery S3 a lot saver to hold but it's not so much that you'll have problems slipping it in your pant pockets.
The kickstand only allows for landscape mode and looks rather flimsy but it's not. It stays in place when closed and has no problem holding the S3 when in use.

Trident Kraken. You can throw your phone like a football across concrete and It wouldn't damage your phone. Plus its has a kickstand and different color choices.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=trident+kraken+S3

I'm probably going to order one of these to try out. Inexpensive as can be and gets good reviews.
EBay item #221090881463.

rlatjs17 said:
Trident Kraken. You can throw your phone like a football across concrete and It wouldn't damage your phone. Plus its has a kickstand and different color choices.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=trident+kraken+S3
Click to expand...
Click to collapse
I've been looking at that one, though it's a little chunky and kind of on the "busy" side. In terms of protection, it does look to be one of the best sporting a kickstand.
EDIT - Updated my original post with some options for those interested

There are tons of great cases, but for the best deal, look on Amazon and search for hybrid case for galaxy s3. There is a case that looks like an otterbox, and it is tough and has a stand. Great deal too, I got mine for $3 including shipping.
Sent from my SPH-L710 using xda premium

tomtom96135 said:
There are tons of great cases, but for the best deal, look on Amazon and search for hybrid case for galaxy s3. There is a case that looks like an otterbox, and it is tough and has a stand. Great deal too, I got mine for $3 including shipping.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
You're probably talking about the Fosmon/GreatShield Hybrid (I've seen them branded either way). It's in the list I've added to my OP

About the Tomaxx Silikon TPU you've linked:
Tomaxx is probably only the name of the ebay seller. You can get that case everywhere, don't have to order from a german seller, when you are in the US.
http://www.amazon.com/Cosmos-Stand-...TF8&qid=1352685183&sr=1-58&keywords=galaxy+s3
http://www.amazon.com/Fosmon-Hybrid-Stand-Samsung-Galaxy/dp/B0089NQF22/ref=pd_sim_sbs_cps_1
Cheaper and more important: faster delivery.

Oh yeah your right. I didn't know that was manufactured by fosmon. They make so many products, and for the price, the quality is excellent.
Sent from my SPH-L710 using xda premium

if you want serious and TESTED protection and lots of color options but NOT SLIM trust me. get a case-ology impact case.
http://www.case-ology.com/shop-by-d...ices=251&limit=all&manufacturer=8&price=10-20
you can get them on ebay too watch for fakes
I have involuntarily TESTED these cases (SII and SIII) and they are truly protective. never a scratch on the phone whether I crunched it in the hatch of the minivan (ouch) or tossed it 15ft into the street when some wasps decided to teach me the error of my ways as I tried to photograph them
I avoided the stingers and learned my lesson. get a zoom lens hehe
I have the orange and blue one. $12.95 shipped. you can't beat it. they have TWO STYLES for the S3 so watch it. one has a oval around the camera one has an oval with a little "cut out" (you will see what I mean) because if you don't see the exact color combo you want you can buy 2 and mix and match parts I had to do that to get the same blue orange with my S2. so make sure the two you order if you do this are the same style.
you want the "heavy duty hard" cases with the 6 little "curves" on the back like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its the only case I will use on a day to day basis because I DO NOT have $400 to replace this phone!!
I have one well over 18 months old. NO DEGRADATION AT ALL. the silicon has not gotten loose or sloppy. here is my S2 with the case that's been on it for over 1.5 years.
sadly the blue for the S3 is much much darker. (I prefer lighter brighter colors) so once I have more cash going to order a couple other blue ones and hope one of them is a "lighter" blue. (the S3 case is WAY darker than the picture shows a dark NAVY)

nerys71 said:
if you want serious and TESTED protection and lots of color options but NOT SLIM trust me. get a case-ology impact case.
http://www.case-ology.com/shop-by-d...ices=251&limit=all&manufacturer=8&price=10-20
you can get them on ebay too watch for fakes
I have involuntarily TESTED these cases (SII and SIII) and they are truly protective. never a scratch on the phone whether I crunched it in the hatch of the minivan (ouch) or tossed it 15ft into the street when some wasps decided to teach me the error of my ways as I tried to photograph them
I avoided the stingers and learned my lesson. get a zoom lens hehe
I have the orange and blue one. $12.95 shipped. you can't beat it. they have TWO STYLES for the S3 so watch it. one has a oval around the camera one has an oval with a little "cut out" (you will see what I mean) because if you don't see the exact color combo you want you can buy 2 and mix and match parts I had to do that to get the same blue orange with my S2. so make sure the two you order if you do this are the same style.
you want the "heavy duty hard" cases with the 6 little "curves" on the back like this
its the only case I will use on a day to day basis because I DO NOT have $400 to replace this phone!!
I have one well over 18 months old. NO DEGRADATION AT ALL. the silicon has not gotten loose or sloppy. here is my S2 with the case that's been on it for over 1.5 years.
sadly the blue for the S3 is much much darker. (I prefer lighter brighter colors) so once I have more cash going to order a couple other blue ones and hope one of them is a "lighter" blue. (the S3 case is WAY darker than the picture shows a dark NAVY)
Click to expand...
Click to collapse
I read your post in the other thread with interest. As I understand it, you combined 2 different cases together (Blue and White and Orange and White) to make your Blue and Orange combo. Unique!
There does seem to be quite a few imitations of this particular style. The Fosmon and GreatShield models mentioned above appear to be virtually the same except for the branding. Either way, all reports of these models appear to be pretty favorable!

Cruzerlite spi (style) is the one you want. I have bought many of them (iPhone, galaxy s2, galaxy s3) and am satisfied with all of them. Grippy, slim, and kickstand works great.
You can get them cheaper on eBay
http://www.ebay.com/itm/White-TPU-H...334451?pt=PDA_Accessories&hash=item2a25b65bb3
Sent from my SGH-T999 using Tapatalk 2

shamez23 said:
About the Tomaxx Silikon TPU you've linked:
Tomaxx is probably only the name of the ebay seller. You can get that case everywhere, don't have to order from a german seller, when you are in the US.
http://www.amazon.com/Cosmos-Stand-...TF8&qid=1352685183&sr=1-58&keywords=galaxy+s3
http://www.amazon.com/Fosmon-Hybrid-Stand-Samsung-Galaxy/dp/B0089NQF22/ref=pd_sim_sbs_cps_1
Cheaper and more important: faster delivery.
Click to expand...
Click to collapse
Excellent choice here ^^
I have purchased a ton of cases, this one is one of my favorites.
I ended up going with the Otterbox Defender when on the job,
and the Seidio Surface case when off work.
If I had to have the same case on all the time, and had to pick only one... it would be one of the Fosmon you link to.

Moto X Bumper Case - a quick overview.

So I've seen a few people talking about bumper cases for the Moto X, but few people seemed to jump at them, and as far as I've seen, no pictures have been posted of the case actually ON the phone. Well, I wanted to explore some alternatives to a full case, and this would give people who use MotoMaker an alternative.
First, I purchased the case off of Amazon for $6.99 shipped. It comes in a few colors. I chose black on black. The case shipped quickly and arrived quickly via USPS.
http://www.amazon.com/Slick-Shell-P...&qid=1381544095&sr=8-3&keywords=moto+x+bumper
Please note, I only just received my Moto X and bumper case today. I haven't had a chance to activate the phone, and won't be doing so since I'm heading out shortly. Still, I need to nerd out a bit with this phone, so I'm writing a short case review. Note, however, that I can't say say if the case affects the function of the phone at all, but I highly doubt it. I will update with my thoughts once I get the thing activated.
Overall impressions: The case is quite nice. Minimal, provides protection for the corners, face, and back, and looks pretty good. It appears to be matte TPU with a thin piece of hard, glossy plastic to help hold it together. Here are a few pictures of the case itself:
This first photo is just the front of the bumper case, followed by a picture from the back. As you can see, it does have a little tab. I'm not sure what this is for.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here we have all the ports cut out of the sides of the bumper case.
The buttons on the side of the case. I've never really cared for buttons on my cases and have cut them off of every TPU case I've had. We'll see how these fair shortly...
As far as I know, the following is the first picture of a Moto X actually sitting in this case. The case slips on pretty easily but sits snugly enough that I have no concerns of it sliding off.
Here's the back. You can see the tab once more. Again, I don't know why it's there, but it, surprisingly, doesn't bother me. I also quite like the "stairstep" that the case does. Just ads a nice flow to it.
The top cutouts align as expected.
As does the bottom cutout.
A picture of the buttons. They're actually VERY well done. I'm surprised at how pleasant they are to press and how solid they feel. You'll notice that they also stick out from the rest of the case just slightly. The recess around them also helps give a nice overall feel.
Here's the phone sitting screen down. The front of the case provides protection for the entire face of the phone.
And the phone sitting on its back to give you an idea of how far the case extends above the screen.
Finally, here's a picture from the side of the phone sitting on its back. From what I can tell, the back of the phone just BARELY sits above the table. I believe (although I can't tell for certain) that the case is the only thing making contact with the table. This seems like it should protect the back of the phone from scratches if it's sitting with the back down, but I can't be completely certain. I'd still do my best to avoid sliding the phone on its back just to be safe.
Conclusion: The case fits very well with properly aligned cutouts, looks quite nice, and seems to provide all of the protection that I wanted. It extends past the screen to protect it if the phone is face down, covers all sides and corners to help protect against drops, and seems to elevate the back JUST above whatever surface it's sitting on (I am not positive on this last statement though). It looks good, feels good, and allows you to enjoy the feel of the back of the phone and that Moto X dimple. If you have a MotoMaker version, this is probably the best way to show it off and keep it protected in my opinion.
As I said, I haven't actually USED the phone with the case on since I haven't had the time to activate it yet. I will be doing so tomorrow or Sunday (tomorrow's a busy day), and I will come back with any important updates.
If anybody wants to know anything more about the case or see different pictures, please ask and I'll see what I can do to provide what you're looking for. It just might take me a day or two, so check back.

Great review and thanks
Sent from my Nexus 7 using XDA Premium 4 mobile app

Vanilla Tarantino said:
If anybody wants to know anything more about the case or see different pictures, please ask and I'll see what I can do to provide what you're looking for. It just might take me a day or two, so check back.
Click to expand...
Click to collapse
wow thank you so much for this! I've been trying to find a good bumper case since I have a motomaker-made X, and this post has a ton of great info! A few requests:
Do you plan on removing the covers for the buttons? I would really like my purple ones to shine through, but I'm not sure how it'd work with a case like this...
once you've used the phone a bunch, do you think you could comment on how it feels with vs without the case? I really like the way this phone feels naked, but it's also very smooth and prone to slipping... does the case help with that?
thanks so much and welcome to the X-Zone! Enjoy your new phone!

Thanks OP for this much needed information!
The last picture seems to suggest that the curved back makes the bumper less protective...from what I can see, the phone sits on the table, not the bumper. Nevertheless, the bumper does provide some needed protection.
I also ordered one after days of hesitation. Mainly I ordered a gold skin from DBrand and really wanted to show-off will remember to post the pictures once I have both of them on the phone.

Here is the blue one on white moto x.
Sent from my XT1055 using Tapatalk 4

I have this case and while I really like it, I have gone back to another because the buttons stick out so much that I keep bumping them. I have to really pay attention when i put it in my pocket that i don't turn it on. This may be silly, but it is a change from the other cases I've had.
I wonder how well it would fit if I cut out the buttons.......hmmmm
I really do like the fact that you can see the back and feel it. Especially the moto bump

nonotechnology said:
wow thank you so much for this! I've been trying to find a good bumper case since I have a motomaker-made X, and this post has a ton of great info! A few requests:
Do you plan on removing the covers for the buttons? I would really like my purple ones to shine through, but I'm not sure how it'd work with a case like this...
Click to expand...
Click to collapse
Having used the phone for a day and a half now with the case, I don't see myself removing the buttons. They have a great feel in my opinion, and I actually really like that they're slightly raised. I haven't had the issue that chrisomnia1 mentioned of accidentally turning the screen on when putting it in my pocket. If they were removed, I don't know how well this case would work given how flat the buttons are. That said, I had a TPU case for my Galaxy Nexus for which I cut out the volume buttons. They were recessed relative to the rest of the case, but I had no problems using them. It's basically a question of whether you want to spend $7 to find out.
once you've used the phone a bunch, do you think you could comment on how it feels with vs without the case? I really like the way this phone feels naked, but it's also very smooth and prone to slipping... does the case help with that?
Click to expand...
Click to collapse
I won't be using it much without the case, so I can't really comment on this in the long term. Although I'm cautious, I've dropped phones a few times and don't want to risk it naked. As for a quick opinion, as with all phones, it feels better without the case. I like that I can still feel the back of the phone though, as it feels much nicer than TPU cases. However, it is NOT a grippy case. I wouldn't say it's slippery, but I don't think it provides any increase in grip. If you're looking to increase the grippiness of the phone, this is not the case to do that.
thanks so much and welcome to the X-Zone! Enjoy your new phone!
Click to expand...
Click to collapse
You're welcome, and I definitely am enjoying it!

The bumper cases scare me to some degree.
1. With a white Moto X - the back gets dirty quickly. Looks like a put pine tar on my phone.
2. In the first few days I went naked, I picked up several chips/scrapes in the soft plastic on the back - this after having babied it waiting for my TPU case to arrive.
Gnex or S3 without a case (covering the back) - sure thing, replacement backs are a dime a dozen. Moto X without a case - not gonna do it, wouldn't be prudent.

just got my black/red one and i love it! really great because it shows off the black in the front and the white in the back (developers edition)

real zaebis !

I like the MotoX naked, but my hands are kinda big, and coming from a GNexus--this phone is pretty small. I was looking for a way to slightly increase the size, mainly the width. Does this bumper fulfill that need?

Yes. I like it. In not a fan of cases, but this gives a decent amount of protection without compromising the design.

There's a new case listed on the motomaker website, AirJacket Grip case (made by PowerSupport). Comes in a variety of moto maker colors. Anyone tried that yet? All accessories on sale @30% off through Motorola site as well

scottshu13 said:
There's a new case listed on the motomaker website, AirJacket Grip case (made by PowerSupport). Comes in a variety of moto maker colors. Anyone tried that yet? All accessories on sale @30% off through Motorola site as well
Click to expand...
Click to collapse
I ordered one. $30 shipped. A bit pricey, but I have been needing a case, and hoping this is the case I've been waiting for.

natezire71 said:
I like the MotoX naked, but my hands are kinda big, and coming from a GNexus--this phone is pretty small. I was looking for a way to slightly increase the size, mainly the width. Does this bumper fulfill that need?
Click to expand...
Click to collapse
It increases the width of the moto x by about like 0.25 in

scottshu13 said:
There's a new case listed on the motomaker website, AirJacket Grip case (made by PowerSupport). Comes in a variety of moto maker colors. Anyone tried that yet? All accessories on sale @30% off through Motorola site as well
Click to expand...
Click to collapse
Yes, I saw that and was interested in it at first glance, but, in the spirit of the topic at hand (bumper cases), it sadly isn't what I would consider to be a true bumper due to the clear back. But it's great it exists and that we have the equivalent of a Ringke Hybrid Fusion case for the X!
It's sad but it looks like the Moto G is going to be getting real bumper treatment (Motorola Grip Shells). I really hope they make some for the X too:
http://www.motorola.com/us/consumer...ls-for-Moto-G/Motorola-Shells-for-Moto-G.html

Pulled the trigger on this case... I like the Moto X naked but just want the screen raise so I can set it screen down with out scratching... ya I already have one in the dead center of the screen that I hope I can buff out. I HATE screen protectors.

webby_s said:
Pulled the trigger on this case... I like the Moto X naked but just want the screen raise so I can set it screen down with out scratching... ya I already have one in the dead center of the screen that I hope I can buff out. I HATE screen protectors.
Click to expand...
Click to collapse
I think you should try some glass ones, they provide protection and you can barely tell that they're actually there.
Sent from my SM-N9005 using Tapatalk

Just ordered a soft bumper tpu from eBay for $5. Comes with a screen protector. I'll post when I get it in 3-4 weeks lol
Sent from my XT1058 using xda app-developers app

I ordered the bumper from the op and I love it. I did cut off the tab on the back. Not sure what purpose it served but its gone now and looks better