It is from an HP 6315 from 3/31/05
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/22539.html
I would love to see if we could get this stack and the settings on our XDAII and other HTC devices,,, THAT would be cool.
Bluetooth build 1.0.0.3701:
Corrects inaccurate display of headset icon when a call is in progress.
Adds a check to determine if Bluetooth stack is initialized before accepting messages from phone.
Adds a user interface (UI) change to enable a connected headset to automatically disconnect before attempting to connect to a different headset when the user chooses to connect to a second headset.
Corrects check for invalid device name.
Corrects issue where handheld could not reconnect to remote device after a page timeout.
Corrects Object push profile update so it sends all files.
Updates FTP connection wizard to correct service discovery issue.
Corrects issue with call waiting for incoming call handling while dialing out.
Corrects issue with headset connection icon so it is correctly displayed after power cycling.
Corrects audio to make it compatible with an in-car solution.
Corrects audio issue where the right channel for a headset was unavailable for playing audio and during calls.
Corrects issue where the LED and network status were not properly synchronized.
Corrects issue where the user could not send multimedia messaging (MMS) message.
Hmmmm....a few remarks, correct me if I am wrong:
1. There is already a BT version 1.0.0.3900 available
2. This is not a HTC device, so I doubt the tools developed here will work on it.
HappyGoat said:
2. This is not a HTC device, so I doubt the tools developed here will work on it.
Click to expand...
Click to collapse
This is an HTC device. All HPs are designed by HTC.
Well, even though I don't want to stop progress because I would like to have the ROM taken apart for my own personal reasons, the 6315 was actually made by Compal. Bad move on the part of HP in my opinion. However, the bluetooth stack that was taken from an iMate JAM worked on the 6315 and that is how most survived until the update was released. So it very well could work on the HTC's. On a side note, if someone could point me in the right direction, I will take the ROM apart, just don't know where to start.
mamaich said:
HappyGoat said:
2. This is not a HTC device, so I doubt the tools developed here will work on it.
Click to expand...
Click to collapse
This is an HTC device. All HPs are designed by HTC.
Click to expand...
Click to collapse
Oops....my bad....excuses!
no htc dont make ALL hp's pda's the H5400's was oem'd from LG
and even if the ipaq in question is made by HTC then that dont garentee that the xda tools work as they are not made by HTC
I can tell you now that the XDA tools do not work on that ROM as it stands. However, looking through the HEX, it is laid out a little differently than the XDA ROM's but have some of the same portions, just in different locations. Now if I knew more about what I was looking at, I could take it apart for you. The 6315 uses Widcomm BT and like I stated before the BT drivers ripped from a JAM worked great on the 6315 so I have a feeling the 6315 drivers will work on the XDA's.
I can also tell anyone looking at it that in the first header of the ROM the letters are shifted 13 characters. So when you see RAT it equals ENG and so on. It looks like they don't do that for very long though.
BT
HappyGoat said:
Hmmmm....a few remarks, correct me if I am wrong:
1. There is already a BT version 1.0.0.3900 available
Click to expand...
Click to collapse
BT 3900 and 3500 do not support Hands Free Profile or even Headset Profile on my XDAII.. This is important so people can use Caller ID on a BT device and OR a Car Kit with the Hands Free Profile....
Switching stacks is a pain in the but...
Even so, the only OS that even slightly works with Hands Free on the Himalaya, is 2.20 translated but even that has bugs that makes it very frustrating. The 2005 did have a fully functional BT, even having separate serial ports for each BT device, (like GPS), but the other bugs and the limited memory left over from the useless and unerasable Extended ROM from the other OS made it no good..
With this new ROM, I may be tempted to buy the HP again.. When I first bought one, it was DAM slow and the BT SUCKED!!!
Maybe now it is usable.
I love my Himalaya and it's 128 of built in..
http://www.expansys.com/product.asp?code=PDA2&asource=IMATE
http://www.expansys-usa.com/product.asp?code=PDA2&asource=IMATE
I will just have to keep waiting for one of the above unless someone finds a fix for the BT Hands Free.
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
e-thug said:
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
Click to expand...
Click to collapse
Hmmmm .... I don't believe you ever stated what type of headset you are trying to get working here? I find your problem to be very strange, even though WinMo does seem to be lacking in a lot of different areas, audio streaming via bluetooth stereo headset is definitely not a problem I have encountered. It even streams flawlessly through my 5.1 hooked to my pc via a crappy 8 buck bt dongle and still sounds excellent. Have you considered that the problem may lie with your bt headset itself?
Also, when you say that you installed latest "release" from AT&T (from a thread on this site), what exactly do you mean? I am running the "unofficial" leaked rom from AT&T on mine and I just paired my Motorola S9 stereo headset and it is playing great for me. You also may want to try using some different software, give S2P (Slide 2 Play) a try and see if you have different results. That's what I am using right now, but I have used TCPMP to play a few xVids through my headset and have had no problems.
The problem is not in the head unit. 25 other phones can't all be wrong. I have no problem using my bluetooth headset. That is probably why you don't see the problem. Anything more complex than a headset will not work with this release. The problem lies within the phone as soon as it displays a notification (which, of course I cannot disable) which reads, "The connected Bluetooth headset does not support volume adjustment from the device. Adjust volume on the headset itself."
That message is the kiss of death. So basically any Bluetooth head unit will not work with this phone? Sounds like shoddy programming to me. Yes, I am using the "leaked" release. I really don't think this release will ever see the light of day. Its horrible! You cannot disable notifications (I don't need to know when my text messages were sent successfully), and it looks like whenever I get a system notification, any program I am using crashes immediately. Like I said before, as soon as I get a notification, I lose the Bluetooth connection (which is like a split second before the notification comes up). I highly doubt this "leaked" copy will ever see the light of day, officially (unless AT&T and HTC do absolutely zero testing on it).
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
My Tilt 2 works absolutely fine with all my BT devices, including 2 Motorola headphone sets and my Sony Xplod head unit in my truck.
e-thug said:
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
Click to expand...
Click to collapse
I was mis-understanding you about the head unit, I did think you were talking about a headset. Sorry bout that, my Mustang doesn't have built-in BT so I have to use a Motorokr t505 for those chores. It works well but it does give me the same message that you are getting about "volume can't be cotrolled etc" but I can dismiss it and carry on without any problems.
but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
Click to expand...
Click to collapse
Since you don't need your phone for calls, just get Sirius or XM. Ya know, considering you only stream music through the phone..
Did you try the BT headset or head unit with the original stock ROM before you flashed the "leaked official" ROM?
Seems like you might have a couple random issues, with the BT issues and the system notifications crashing programs. I haven't flashed the leaked ROM, but I do know that many random issues with cooked ROMs can often be cleared up by running Task29, which completely wipes the phone memory before you flash a new ROM. I think you will need to HardSPL before you run Task29. Might be worth a try, sometimes fragments of the old ROM interfere with the new one, and cause some bugs.
Bluetooth protocols can be implemented differently by different manufacturers.
I know of many people including myself who have NO PROBLEM with the tilt 2 and different Bluetooth products INCLUDING car radios.
I am using the "new" AT&T ROM and have no difficulties.
Clearly your pissed but your subject is wrong. I would suggest changing to "Worthless as $HIT to ME"
I think my problem is that I am getting notifications which seem to be killing my connection. Is there a way to turn all notifications OFF? The only ones I care about are missed calls, incoming SMS and maybe a birthday. I would like to try to kill the notifications first because I think this may solve my problem
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/06/24/enable-or-disable-the-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/06/24/tweak-and-configure-how-notifications-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
redpoint73 said:
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/...he-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/...cations-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
Click to expand...
Click to collapse
Thanks I will try these out and report back
For the record my head unit is a JVC KD-BT11 and I have never had any kind of problem pairing any other phone
Somebody else just posted a very similar issue, and found the app hAndyUtils to be helpful:
http://forum.xda-developers.com/showthread.php?t=741311
I think hAndyUtils might just be a app-based way to make the reg edits I posted earlier. But give it a try.
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack. (Just as an aside, on all my past phones, there were people bemoaning the the fact that it had MS, and trying to replace it with the Widcomm, so I am getting a real chuckle out of folks complaining about the Widcomm and wishing for MS )
In any case, the utilities (Blue music toggle etc...) that used to work for me to toggle between streaming in stereo and plain phone qulity no longer work. However, all my stereo headsets (I own three different brands/pairs) all work perfectly with the Tilt 2. And stay connected and streaming all day.
By the way, coming on a forum that is full of people helping each other and using profanity, anger and threats, is not the most conducive way to get your questions answered. The odds are that the problem you are having is already solved somewhere among the 6+ million posts in this forum. I do not know where or I would post it for you, but it is probably out there. Good luck. And if you find it, please post the link to the answer back here so that other serchers will find it too.
maybe it can come from the phone itself
i had a rhodium for almost a year and never got my motorola headset ht820 to work well enough for me to use it... (more skips than music...cant move my head without a skip)
i flashed to a NRG rom before trying my headset...i tried eveything as far as ref setting, different radios...even flashed my ht820...
no improvement...
then my phone fell in water not so long ago...got another rhodium same model (european)...and it worked perfect out the box on stock rom i can go in a different room than my device and still hear music with no skips...and it still does with nrg rom and latest radio...
so my guess is maybe some actual devices have bad bluetooth hardware ???
I have the Motorola S9 and the HT820 and both work absolutely fine on my Tilt 2.
yatrg said:
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack.
Click to expand...
Click to collapse
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
e-thug said:
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
Click to expand...
Click to collapse
Did you ever try the solution in this thread? It fixed a lot of issues people were having with bluetooth car kits. Maybe it will work for you: http://forum.xda-developers.com/showthread.php?t=591322
The solution source is here: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
And here is the solution. You need a registry editor to do this:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change (or add if not there) DisableReopenAudio to 0 (default is 1)
3. Reboot device
You may also want to do the A2DP quality registry edit: Add a DWORD value of LineSpeed to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
Give it a try, it may work for you.
I will give this a try and report back. Thank you very much for the response!
No luck. And my bdaddr keeps resetting to a binary value when I reset the phone
I have a number of BT headsets which claim to be able to multi pair. But it never works - if I connect to a handset, I'm disconnected from the other one. Manuals have never been clear, support has always been unhelpful on this particular feature bizarrely beyond saying I need to attach one as HSP and the other as A2DP. Well fine, but the question how the heck do I do that never gets answered.
Right now I have a WP7 and a WP8, but it's been equally unsuccessful with Android or iOS. I realise it's likely because both handsets try to grab both profiles, but I'm not aware of any control over this with e.g. WP8 (and certainly not WP7). Is there some sort of trick to getting this to work? Or is there a platform combo or headset (a good one) on which it always works?
I haven't seen many threads on this and I am curious as to why it is not a concern for many Android users. Maybe it is because many Android users did not move from Apple like I did. The fact is, Apple is still superior to Android in terms of vehicle bluetooth connectivity. The more you need to look at and operate your phone while driving, the more dangerous driving becomes.
The difference between AVRCP 1.3 and AVRCP 1.5 primarily is the playlist selections. Since my car supports this, with 1.5 (iPhone 5) I would be able to see the contents of my library and browse/select music. Then I switched to a Nexus 6 and didn't have this feature anymore. Just a couple days ago I got the Nexus 5X and I am surprised they didn't change this with Marshmallow.
Is Apple always going to hover over Android with their updated bluetooth stacks?
Seems ridiculous that this is still a problem. Its as if no one want to shed any light on this. Talking about this and no apps that expose the Bluetooth stack and avrcp versions to the users who don't know any better. I would be nice if this was a separate module that could be upgraded independently so users could get the functionality they needed. Companies like Samsung rolling there own stack and adding feature is not a proper fix. This should be Android standard.
I have always been thinking the same thing, why is the
bluetooth stack from Google missing so many features.. I have tried both Samsung and HTC and their stack is just so much better.. But I always end up with a Nexus phone again and longing for a better BT stack...
Sent from my Nexus 7 using Tapatalk
BT overall sucks with the 5X. Hissing, popping, laggy stream kills it for me. It can't keep the connection with my car either while iPhones were trouble free. It's almost 2016. Are we asking for too much?
Thought I would add a way to get some info. This is from android.stackexchange.com/questions/43667/discover-version-of-bluetooth
Turn on bluetooth by going to the home screen, clicking menu->settings bluetooth. Pull that to enabled. Make sure it is on.
On the home screen, click menu -> settings -> applications -> 'running' tab.
An item appears called: "bluetooth share".
A screen pops up with information about the program, but it is sparse.
Also you can go to All tab and "Bluetooth Share" to see its actual version number. Though that might not be very helpful.
Also and old article discussing some of the bluetooth stack changes in Android for what its worth.
lwn.net/Articles/597293/
Sorry for the broken url but I've not posted enough on XDA to be allowed proper urls.
I'm going to try keep posting things I find that might be useful just consolidate more info in one spot. Trying to make this problem clearer for myself.
Is there anything new about AVRCP 1.5 features? May it possible to build and install a custom kernel with bluez support (which afaik has avrcp 1.5 support)?
More info on the bluez stack
http://forum.xda-developers.com/showthread.php?t=2640723&page=1