Related
Hi,
I have a HTC Touch which I am currently using the Pocket Player software to stream my music from my PC which is located upstairs. I can connect the Touch to my Stereo amplifier through a USB/Jack cable and play the music through my Hifi speakers rather than headphones but I was wondering if it would be possible for me to transmit the audio to my amplifier by way of Bluetooth. It would cerntainly allow me the freedom of changing tracks on my phone sitting in my armchair rather than sat next to my amplifier through a cable. I.E Streaming music from my PC through Wi-FI, via my HTC Touch through bluetooth.
Hope this makes sense. Has anyone done it and is there a noticible difference in sound quality when sending music by bluetooth rather than a wired connection.
I have seen various Bluetooth type devices on ebay and amazon that claim to do this type of thing but as I have never tried Bluetooth I am a little sceptical and not sure exactly what is required. I assume that as my Touch can send Bluetooth beam I would only need a reciever to connect the Jack plug from my amp, is this correct? Or would it be better to buy a jack transmitter/receiver for the job.
I don't want to spend a whole lot of money doing this just to test so can anyone recomend a device.
Thanks in advance for any help.
http://www.amazon.com/Bluetooth-Hom...1_33?ie=UTF8&s=jewelry&qid=1206395658&sr=8-33
http://www.amazon.com/Motorola-Blue..._83?ie=UTF8&s=wireless&qid=1206395823&sr=1-83
Both of these work well.
original belkin tunestage
...working nicely for me.
Ive been searching around but cant seem to find any apps that would do this. seems to me like it would be quite simple to do. anyone know o something similar to able to quickly put something together?
Main reason at the moment is that i currently have a long wire diagonaly across my room to connect my laptop to my speakers. I just thorght it would be realy good if i could plug my phone into my speakers and then send music to it via bluetooth. Im sure other people have been in this situation where an audio cable has not quite been long enough.
Might be a bit harder but possibly this could work over wifi too and would be able to work from room to room. I expect this would require a pc client though..
any thorghts?
I would love to have something like this. The phone would behave like a bluetooth speaker or headphone (A2DP). This would be fantastic. I was looking for something like this a year ago, I thought I would find a software which helps me do this, but I was unable to find anything then. Maybe we can find something now.
I could try developing such a software if there is not anything of this sort already available. I would be glad if any experienced developer can provide us some starting points, keywords, etc., which would speed up the initial activities.
Use UPNP media server
the simpler solution is to use unpn media server over wifi networks
like twonkys media server. or xmbc
basically the computer where the files are stored will server the files to any network attached device including HTC through webbrowser.
I have my dish tv /Satellite decoder connected to home pc using vlc and watch the tv on my HTC HD using VLC
for sound files i directly load them over network disk
Anil
Bluetooth Audio Receiver
I've got a TV which supports bluetooth headphone. With such a software, I'd be able to use my HTC HD2 as a bluetooth headphone. This should turn the phone into a bluetooth audio reciver, rather than a transmitter.
I've been looking for this software for ages and appreciate any ideas.
pranil said:
the simpler solution is to use unpn media server over wifi networks
like twonkys media server. or xmbc
basically the computer where the files are stored will server the files to any network attached device including HTC through webbrowser.
I have my dish tv /Satellite decoder connected to home pc using vlc and watch the tv on my HTC HD using VLC
for sound files i directly load them over network disk
Anil
Click to expand...
Click to collapse
yea this would have been good. was halfway through downloading xmbc when i realised it wont work in my case.. im at university and the wireless has some security issues that wont let it connect to my phone
also wireless drains quite a bit more battery than bluetooth and would probably have to plug in the phone each time you do this.
some great links though, now we need some bluetooth ones!!!
Is this what you need?
http://beemer.sesma.eu/en/btaudionav.htm
Let's see if I get that right:
You want to send BT stereo audio from your BT-enabled laptop to your phone, and plug your phone into speakers for audio output. Right?
Might be easier to get a bluetooth receiver for your speakers. There are some for your home audio system (e.g. at amazon).
What I did was get a stereo bluetooth headset receiver. You can use it as a bluetooth headset (in your car, on the bus, wherever) OR you can simply plug it into your speakers. Just be sure to find one with a 3,5mm plug (and not wired-on headphones) so that you can use your own headphones or plug in your speakers. There's a choice of fine receivers from
Nokia (BH-214, BH-500, ...)
SonyEricsson (HBH-DS205, HBH-DS980, ...)
Jabra (BT3030, ...)
or you can try and get a cheap but great one from the itech clip series.
HTH.
N.
jonhdoe11112 said:
Is this what you need?
http://beemer.sesma.eu/en/btaudionav.htm
Click to expand...
Click to collapse
no, I dont think so. thanks for the suggestion though!
we arnt trying to get sound from the phone to a bluetooth speaker but instead turn the phone itself into a speaker whcih can recieve audio from other bluetooth devices.
for example if watching a film on my laptop, i would like to plug my phone into my speakers, connect up the bluetooth, and watch rather than running a cable to the speakers which are a long way away.
Nik, you bet me by one...
Nightcookie said:
Let's see if I get that right:
You want to send BT stereo audio from your BT-enabled laptop to your phone, and plug your phone into speakers for audio output. Right?
Might be easier to get a bluetooth receiver for your speakers. There are some for your home audio system (e.g. at amazon).
What I did was get a stereo bluetooth headset receiver. You can use it as a bluetooth headset (in your car, on the bus, wherever) OR you can simply plug it into your speakers. Just be sure to find one with a 3,5mm plug (and not wired-on headphones) so that you can use your own headphones or plug in your speakers. There's a choice of fine receivers from
Nokia (BH-214, BH-500, ...)
SonyEricsson (HBH-DS205, HBH-DS980, ...)
Jabra (BT3030, ...)
or you can try and get a cheap but great one from the itech clip series.
HTH.
N.
Click to expand...
Click to collapse
to be honest ive actualy already ordered this:
http://shoponspot.com/bluetooth-20-a2dp-avrcp-stereo-music-receiver-and-handsfree-black/
I still would like to see this app developed as i can imagine future situations where this happens and i dont want to have to carry this around everywhere.
also people with bluetooth tvs im sure would prefure not to have to use another device all the time and occasionaly you get bluetooth headset transmitters in public places where this might be useful.
hope it is possible!
ooo wow! im a senior member now!!
well i received my bluetooth headset but unfortunatly it charges through the 3.5mm headphone jack so i am unable to leave it there to just work
Ive also tried plugging in a headphone splitter but it realy dosnt like that!! so that means every time i leave my room i will have to put the reciever on charge and every time i return i will have to turn it on and plug it in.
does anyone know if it would be possible to get the phone to work as a bluetooth audio reciever? seems like something it should be able to do
I'd like to bump this because I've been searching for ages for exactly this. I'd personally like to go one step further and have a client that would support A2DP and the handsfree protocol. The latter I would like to allow me to answer and initiate calls to my work mobile using my HD2 as though it was a bluetooth handsfree kit. Then I could use one phone for all my calls.
I can imagine a wide range of useful applications that other solutions like wifi audio streaming or a dedicated bluetooth audio receiver wouldn't match.
I wish I knew how to write software... Maybe if I ever have a few hundred hours of spare time on my hands I'll learn and write an app to do this.
i also want this.
please anyone help.
This would be great.. i currently have an nvidia shield tv and I can plug my normal wired headphones into the nvidia shield's bluetooth remote. The problem is the remote's battery life only lasts a few days when used like this. I would love to be able to use my mobile phone as a back up for when the nvidia remote battery dies. For some reason the nvidia remote won't charge unless my head phones are unplugged.
Hooroo
I just bought a new car yesterday & have a question about playing music through the stereo. My car is a equipped with a 3.5mm & a USB. Basically it is setup so that you can play your ipod/iphone through the car stereo.
I can play music from my phone using the 3.5mm AUX but there is not a lot of volume. Not only that but the quality seem to be degraded.
I can connect my phone via the sync cable but music will only play when I select disk drive when asked for the usb connection type. The sound quality & volume is excellent but I can't use my playlists on the phone. Is there a way to get music to play through the car stereo when activesync connection is selected?
Or is there a cable like the iphone cable that will allow me to do this?
How good are you with wiring? Their are pretty easy to install car kits that will work better
http://www.amazon.com/Scosche-FM-MO...8?s=electronics&ie=UTF8&qid=1301009458&sr=1-8
http://www.amazon.com/Peripheral-PAC-IS77-Universal-Radios/dp/B002IY598O/ref=pd_cp_e_1
If you check the manual for the stereo system, are there any playlist formats that it does support?
Perhaps just by saving your playlists in a different format, you might get it to work...
normally in my stereo which only has the 3.5mm headphone jack I find that if you turn the phone all the way it up sounds very distorted, I tend to turn it down 2 notches from max and adjust my car stereo volume from there
i also found that to be very helpful with quality also
Update:
My car stereo will read the folders on my imagio when disk drive is selected for the USB connection. I can scroll to individual folders & songs that I want to hear. There are still too problems though.
1. I would rather navigate my music folders via the phone with an activesync connection.
2. When I have the disk drive connection selected I am unable to use TomTom.
I can use the AUX jack but I don't get as much volume. On the highway at 75MPH I have to have the volume on the stereo maxed & it still isn't loud enough.
Is there a solution that would allow me to use the USB connection?
I would prefer a solution that is only going to cost me a couple of bucks
Previously I did have one of the FM modulators to play music through the stereo. I am aware of lowering the volume on the phone to reduce the noise.
Thanks to those of you that have replied to my original post.
It looks like your phone doesn't have enough "power" to feed your AUX in.
Normaly you should use a line-signal to feed your AUX.
What you can try is to amplify your signal from you phone before you send it in you AUX.
If your car stereo have a bluetooth option, you can pair it for sound!
I would like to build an Android car infotainment device to replace all my gadgets inside the car. One option would be a micro PC with USB touchscreen and a lot of devices connected via USB. The other one would be an Android gadget, either small tablet or TV box.
The biggest question I have is: what Android devices support 5.1 audio? This is a must, though I actually can use only 4 channels. What audio formats are supported for this?
The other question would be TMC - the FM kind, not online.
Are there any embedded platforms out there (except PC and Android) which support multi-channel audio?
Has anyone done this before? I might be reinventing the wheel.
No updates? Either nobody knows about Android 5.1 sound output or they are working under NDAs.
Are you planning on keeping a headunit to control volume, do you want am/fm radio, etc....
without a headunit you will need an amp where you can use the headphone to rca adapter and usually its the amp that would add front and rear to the left/right output of your android device so you would still get the 4 chan output effect. to go for the 5.1 chan you will need another device that actually controls the 5 speakers plus the subwoofer which might be tricky but I'm sure its not impossible.
the setup I was going to go with was a amp that I can mount its power controls (left right front back and volume) (or amp/eq combo) to where I can reach it and build a mount for a 7in (possibly diff size not sure depends on how it will look) and use the heaphone to rca adapter to power the audio and put the usb inside the dash possibly with a little hub if they make it (that way not only is it getting power from it, if it allows, the addition of say a thumb drive with added music/movies. some tablets/phones have fm radios built in as long as something is plugged into the headphone jack (my new phone doesn't seem to have it but thats a feature I will be looking for in a tablet)
4chan amp
eq that would allow 2 chan in and 4 chan out plus sub out (if you have a separate sub amp)
I just want to know if there are any android devices that are able to stream 5.1, I can take it from there. Same question about TMC support.
Some details:
My car is already fitted from the factory with 4 channel preamp and 12 speakers including subwoofer low-pass. It has low-level input for those channels, worst case I would buy a preamp.
FM is pretty much given on most Android devices, probably excluding some tablets, but I won't actually miss it if it's not there.
TMC would be nice since all Androids usually have a GPS sensor and sometimes compass.
Anyway, it was mostly a request for suggestions or even a rant - I'm surprised that something like this doesn't exist yet. With the exception of dedicated units going >$$$-$$$$, an alternative set-up would be a medium-range blueray player coupled with an Android tablet. Music control could be set up with DLNA, bluetooth streaming or mixing player and android audio would be a bit harder but not impossible.
hey friends
this is a nice thought and you are absolutely great.
this is wonderful thread
........................
Great Idea
Hi,
Currently I'm also thinking about installing an android tablet in my car to have music, navigation, movie player, speed camera warning, etc. But the biggest problem is the sound. I want to connect tablet with car audio using jack-jack cable. Everything is fine till the AUX source is selected in car audio device, but when I switch it to Tuner or CD - the sound from tablet is cutted off, so e.g. navigation announcement are not heard.
Any suggestions for this issue?
audio rom
its a shame that there are many many roms but none fur special purposes like this.
we need a car rom
[email protected] said:
Hi,
Currently I'm also thinking about installing an android tablet in my car to have music, navigation, movie player, speed camera warning, etc. But the biggest problem is the sound. I want to connect tablet with car audio using jack-jack cable. Everything is fine till the AUX source is selected in car audio device, but when I switch it to Tuner or CD - the sound from tablet is cutted off, so e.g. navigation announcement are not heard.
Any suggestions for this issue?
Click to expand...
Click to collapse
Only solution can see is to run the audio from the tablet alone. I.e. use the tablet to provide both radio tuner AND navigation. You will end up using the car system purely as an amplifier.
Cris123 said:
Only solution can see is to run the audio from the tablet alone. I.e. use the tablet to provide both radio tuner AND navigation. You will end up using the car system purely as an amplifier.
Click to expand...
Click to collapse
This would be what I would do in this situation. Or just unplug the audio cable from the tablet when using other radio options so the navigation will come through the tablet's speakers.
I want to do something similar but rather than purchase a new device I want to use my Note2. No head unit at all. The Note2 would likely be dedicated to this use and I'd get a different phone to use as, well, a phone.
For sound I was hoping I could use USB OTG to connect a USB sound card with 5.1 output but I'm not sure if this would work. I want to use the sound card instead of audio direct out of the headphone jack because that reduces my connected cables to just one (easier) and should provide at least 4 channel output which eliminates the need for another device to control volume, fader, and balance.
For radio I was going to use SDR for AM/FM (and more) via a cheap USB TV tuner.
http://sdrtouch.com/
Where I'm stuck now is that I'd like to be able to connect an iProduct (iPhone/iPod) like you can to most car radios and control/stream music from the iProduct, via the Android Note2 using USB OTG again. I cannot find how to do this but the Parrot Asteroid Smart runs Android and it seems to be able to do it so it must be possible.
http://www.parrot.com/usa/products/asteroid-range/parrot-asteroid-smart/
Any info anyone can provide regarding the sound card and iPod integration would be highly appreciated.
You can go wireless and use some AirPlay receiver for Android.
I don't know about wired solutions, the classic iPod connector has ~30 pins and some of them are used for audio and some of them are used for serial-like playlist control plus current track information.
brainwash123 said:
You can go wireless and use some AirPlay receiver for Android.
I don't know about wired solutions, the classic iPod connector has ~30 pins and some of them are used for audio and some of them are used for serial-like playlist control plus current track information.
Click to expand...
Click to collapse
It's just a USB to iPod cable that they use for everything else... Parrot Asteroid Smart that I linked to has it as do most modern stock head units.
Did a little more googling and it seems several companies sell android head units that support iPod.
Why don't you use a USB DAC? There are a few out there that are surround sound capable.
Out from the DAC into an eq preamp and out to your existing amplifier. The eq preamp has main volume controls as well as sub control with dedicated output.
Also there are head units out there that are just "receivers" capable of accepting a digital inputs and outputting 5.1 signal via RCA.
I installed a nexus 7 2013 in my VW, currently using Bluetooth to connect to a receiver where it the outputs to an rca input on my deck that was relocated to my glovebox. I am planning on replacing the Bluetooth adaptor with a USB DAC in order to achieve a higher quality sound.
I am currently doing a similar install in a 2010 charger, a deck will not be used however as I will be using the DAC method with an eq and output to the factory amp. I considered going the android TV box route as I have a MINIX box, but there is some work involved in getting the touchscreen to function properly as it is not set up for this out of the box.
You can purchase a double din deck from eBay (I stumbled across it a few days ago but didn't write the link down) it has a dual os system. It uses android for the car audio function and windows for the car PC function. Not sure how well it works but it got reasonable reviews.
Edit: ...and once again I answer without reading the whole thread...:silly:
Is it somehow easier to get all the various apps on the phone to output audio to a DAC than a USB sound card?
unL33T said:
Is it somehow easier to get all the various apps on the phone to output audio to a DAC than a USB sound card?
Click to expand...
Click to collapse
I believe when the device detects a DAC (must use an otg cable BTW) it automatically re routes all audio out the USB. You can disable automatic USB audio routing in developer settings.
k.s.deviate said:
I believe when the device detects a DAC (must use an otg cable BTW) it automatically re routes all audio out the USB. You can disable automatic USB audio routing in developer settings.
Click to expand...
Click to collapse
That sounds easier. Thanks for the tip.
Well I can't find any information regarding the iPod integration and I've found next to nothing for DVD video and audio CD playback and radio and backup camera functionality would also take some mucking about so it looks like I'd probably be better off buying something like this:
http://www.ebay.com/itm/7-Android-4...621?pt=LH_DefaultDomain_0&hash=item2a31320af5
Which has it all sorted out already. So much for that fun idea. No idea what apps they use for all that stuff.
Which has it all sorted out already. So much for that fun idea. No idea what apps they use for all that stuff.[/QUOTE]
That unit looks slow at only dual-core. It will probably be sluggish when multi-tasking.
The main chip probably supports several I2S devices (aux in/adc, tuner/adc, DVD) and routing plus demuxing is done via linux hardware control.
The DVD player and tuner probably support the i2c or spi protocol to control seeking and other functions. This is again controllable via the linux devices.
Usually the consumer devices don't have these easily exposed and it's probably a non-trivial task to piggyback on existing hardware, assuming the needed connections are broken out on the board. As far as I can see the only Android devices with CD or DVD are the car players like above.
Another option would be to take the sound from the HDMI signal. A DVD player/tuner can be wired in parallel with an HDMI switcher. However controlling the tracks would not be easy, it would require emulating the remote with an IR transmitter.
Does anyone have a car stereo with a USB port? If so can you elaborate on what that is like to use? I am purchasing a new unit and that feature is one I do not truly understand. A few questions I have are listed below, but feel free to add anything else you think might be useful in making this decision.
1: Does the phone charge while connected to a USB port on a stereo?
2: Can you use the file system and player controls through your stereo or do you have to control the music and other audio through the phone itself?
3: Does the audio work from all sources with a USB connection(for example phone calls or turn by turn), or will it only play music player audio?
4: If you do have access to the file system from your stereo, will it display song titles and artist info etc? How cumbersome is it do control this way?
Landara said:
Does anyone have a car stereo with a USB port? If so can you elaborate on what that is like to use? I am purchasing a new unit and that feature is one I do not truly understand. A few questions I have are listed below, but feel free to add anything else you think might be useful in making this decision.
1: Does the phone charge while connected to a USB port on a stereo?
2: Can you use the file system and player controls through your stereo or do you have to control the music and other audio through the phone itself?
3: Does the audio work from all sources with a USB connection(for example phone calls or turn by turn), or will it only play music player audio?
4: If you do have access to the file system from your stereo, will it display song titles and artist info etc? How cumbersome is it do control this way?
Click to expand...
Click to collapse
It would be helpful to know what actual head unit you're getting. But I will try to answer most of the questions as best I can since I have a fairly new Pioneer HU.
1. Yes, but it only charges on "USB" mode, not "AC".
2. Yes and no. The Pioneer HU that I have does NOT support MTP mode (which is what Jelly Bean, and I believe ICS) uses. Basically MTP is the protocol for storage on the Galaxy Nexus. If you can find a ROM or Kernel or any way to change the mode to "Mass Storage", then you'll be able to browse the file system.
3. Only music (or whatever else is inside your MP3 file). When you connect to your HU through USB, your phone basically turns into a flash drive. From there you have to navigate to your "Music" folder and tell it what to play. The only way to do calls, navigation and music at the same time is to use Bluetooth or a 3.5mm cable with an inline mic.
4. It displays what is inside your ID3 tag inside the MP3 file. So basically, if you have all the info filled in, then yes, it will display it. As far as how cumbersome it is, it takes some getting used to, but not to bad (on Pioneer, I have no idea on any other brand).
Short answer: Unless your stereo support MTP or you can find a way to force "Mass Storage" (which I'm not familiar with a way how), your stereo will only charge your phone. It sucks, but that's the way it is.
Pioneer has the app radio which will control your phone and also allows you to use Pandora on the actual H/U. That said I have never used it nor do I plan on it as its a dual din and I am just happy using bluetooth.
I have a JVC unit that works great with my nexus running linaro aokp jelly bean. The unit is x50bt. It will not play through USB only charge. However it is Bluetooth enabled so it can play anything including you phone calls through your car stereo. I have it setup so that my phone auto connects and plays Pandora automatically. The head unit displays song title and artist and also allows u to thumb up or down using the remote conyrol. I also have playlists set up in power amp for my MP3s. The built in equalizer in power amp along with the equalizer in the head unit work well together. I have the USB cable in the rear USB port so it is hidden in my CRZ. The tiny Bluetooth adapter is in the front and does not look out of place.
Sent from my Galaxy Nexus using Tapatalk 2
nastystang05 said:
I have a JVC unit that works great with my nexus running linaro aokp jelly bean. The unit is x50bt. It will not play through USB only charge. However it is Bluetooth enabled so it can play anything including you phone calls through your car stereo. I have it setup so that my phone auto connects and plays Pandora automatically. The head unit displays song title and artist and also allows u to thumb up or down using the remote conyrol. I also have playlists set up in power amp for my MP3s. The built in equalizer in power amp along with the equalizer in the head unit work well together. I have the USB cable in the rear USB port so it is hidden in my CRZ. The tiny Bluetooth adapter is in the front and does not look out of place.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Per your suggestion, I purchased the X50BT. I am not disappointed. As you said, it does not support MTP, however I have a tiny 32gb Flash Drive(about the size of the Bluetooth Dongle) inserted in the front and the audio quality is simply breathtaking. I have my phone set to auto-connect via Bluetooth, which it does seamlessly. It even connects for audio however the BT audio stream sounds terrible when compared to the USB audio from the flash drive. I don't know if that's a limitation of my phone, the technology or the unit but it hardly matters since I can fit all of my music on the USB drive anyway. I just have to use Bluetooth or the 3.5mm jack for Pandora. Thanks for the suggestion, I really love this head unit!
Landara said:
Per your suggestion, I purchased the X50BT. I am not disappointed. As you said, it does not support MTP, however I have a tiny 32gb Flash Drive(about the size of the Bluetooth Dongle) inserted in the front and the audio quality is simply breathtaking. I have my phone set to auto-connect via Bluetooth, which it does seamlessly. It even connects for audio however the BT audio stream sounds terrible when compared to the USB audio from the flash drive. I don't know if that's a limitation of my phone, the technology or the unit but it hardly matters since I can fit all of my music on the USB drive anyway. I just have to use Bluetooth or the 3.5mm jack for Pandora. Thanks for the suggestion, I really love this head unit!
Click to expand...
Click to collapse
If you're rooted, you have to tweak the Bluetooth sound profile using voodoo or DSP manager for example (which one your kernel allows).
You could add some "gain" amp or reduce the "Mids" and raise the "Bass"..
I have a different sound presets for the:
-Phone speaker (added some mids)
-Headphones (optimized for my Sony headset)
-Blueooth (lots of bass and "Rock" setting, sound is pretty good)
Possible Helpful Info on UMS & MTP
Landara said:
Does anyone have a car stereo with a USB port? If so can you elaborate on what that is like to use? I am purchasing a new unit and that feature is one I do not truly understand. A few questions I have are listed below, but feel free to add anything else you think might be useful in making this decision.
Click to expand...
Click to collapse
This thread might have some helpful info. (especially if the OP dev actually wrote the code for it).
(just tryin to help
danielsaenz said:
2. Yes and no. The Pioneer HU that I have does NOT support MTP mode (which is what Jelly Bean, and I believe ICS) uses. Basically MTP is the protocol for storage on the Galaxy Nexus. If you can find a ROM or Kernel or any way to change the mode to "Mass Storage", then you'll be able to browse the file system.
Short answer: Unless your stereo support MTP or you can find a way to force "Mass Storage" (which I'm not familiar with a way how), your stereo will only charge your phone. It sucks, but that's the way it is.
Click to expand...
Click to collapse
I just wanted to point out that even if you found a way to force USB Mass Storage, it is unlikely that your radio would be able to read the filesystem. Most radios will only read FAT file systems, while the Nexus uses EXT3 (I think, could be 4). So Bluetooth/AUX are really your only options.
Gnex to HU
Landara said:
Does anyone have a car stereo with a USB port? If so can you elaborate on what that is like to use? I am purchasing a new unit and that feature is one I do not truly understand. A few questions I have are listed below, but feel free to add anything else you think might be useful in making this decision.
1: Does the phone charge while connected to a USB port on a stereo?
2: Can you use the file system and player controls through your stereo or do you have to control the music and other audio through the phone itself?
3: Does the audio work from all sources with a USB connection(for example phone calls or turn by turn), or will it only play music player audio?
4: If you do have access to the file system from your stereo, will it display song titles and artist info etc? How cumbersome is it do control this way?
Click to expand...
Click to collapse
I just installed an Alpine HU, It is also does not support MTP. I really like using the Bluetooth but have found that I have to reboot my Gnex and or restart my car to get the Bluetooth to sync correctly. USB does charge but it is slow. One thing to look for is Bluetooth Parrot.
gkaurin said:
I just installed an Alpine HU, It is also does not support MTP. I really like using the Bluetooth but have found that I have to reboot my Gnex and or restart my car to get the Bluetooth to sync correctly. USB does charge but it is slow. One thing to look for is Bluetooth Parrot.
Click to expand...
Click to collapse
I have found if you just toggle the Bluetooth on and off on your phone it should sync.
Sent from my Galaxy Nexus using Tapatalk 2
I am finding that it is more of how my HU looks at my blue tooth. Thus restart car. I am wondering if it has something to do with Android BT. My gnex has worked this way with multiple roms and BT enabled HU.
Sent from my Galaxy Nexus using xda premium
I bought a cheap stereo from Wal-Mart a Dual stereo with Bluetooth, takes a SD card, front and back inputs and satellite compatible. It has the USB plug that charges but like the others, doesn't read the memory on the phone. I stream through Bluetooth all of the time with Spotify. My son's Galaxy SIII can connect too if I turn mine off without changing anything. It was a great investment. It is a convertible and the microphone works great at 70mph with the top down. For $118 I am very happy.
Sent from my Galaxy Nexus using xda premium
I don't believe the Galaxy Nexus will work with the USB of many head units since the Nexus uses MTP instead of UMS.
Hopefully someone can come up with a UMS for the Nexus.
Sent from my Galaxy Nexus using Tapatalk 2
infazzdar said:
I don't believe the Galaxy Nexus will work with the USB of many head units since the Nexus uses MTP instead of UMS.
Hopefully someone can come up with a UMS for the Nexus.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I think the better way would for HU to be able to connect like they do to Apple products and have MTP support.
HU
I know that JVC / Ken-wood have apps for android. Looked more like a HU controller rather then playing from android. Never tested.
I think I figured why my USB isn't connecting from the AVH 4000 NEX to my galaxy note 3 SM-N900. It's possibly due to the MTP mode. I believe if the was a mass storage mode that will work, kinda like a USB stick. I don't think the firmware in my HU is properly picking up MTP, all it does is charge the phone. You need a kennel that has UMS enable for mass storage however the international note 3 SM-N900 currently does not have such kernels. There is only 3.... To my surprise. Maybe the last time I ever go with international models again. If anyone finds away around this let me know thanks.
My car does not have USB or card reader, but aux line!.
So I decided to go cheap and buy a Vieta FM Car Transmitter and BT Handsfree unit, and I does a decent job.
Perhaps in a future I'll go for a Parrot...