Related
I just got my Droid X today and I know my screen is going to get scratched to hell and back. I bought a quality one off of ebay for my TP2 and it was an all out pain to get on; ended up throwing it away in anger.
So what is the best screen protector for the X? I would like one that covers the whole face not just the area you touch. I hear the vzw ones suck...
I was considering buying one of those body guard kits and let someone at the mall install it (i can never seem to get the bubbles out). Are they any good?
There really isn't a "best" screen protector. It depends on what you want in a screen protector. There are two main types, the kind that uses static adhesion (think the plastic sheet that was on the screen when you bought it) or the kind that uses a liquid adhesive. (like Zagg Invisible shield) The liquid adhesive ones typically have better protection, but can cause more distortion and are known to more severely affect the feel of the touch screen. They can also be a ***** to put on, prepare to spend at least 30 minutes to do a proper job, and you won't be able to use your phone for 24-48 hours while it dries. However, if you are really worried about getting the best protection, go for that.
Static adhesion ones are probably going to work for the majority of people, especially since the Droid X has Gorilla glass and many people say you don't even need a screen protector at all. I believe SGP (also known as Steinheil) makes high-quality static adhesion protectors, but they may be out of stock at the moment. I'm probably going to get an SGP for my DX when they get back in stock. Go for the crystal or ultra-crystal, i've heard reports that the anti-glare or anti-fingerprint affect the feel/drag and look of the screen more than the crystals.
tl;dr Get an SGP (Steinheil) crystal or ultra-crystal
I used one on my MT3G. It's still on there after a year.
On the DroidX I haven't put one on. It uses 'Gorilla Glass' which is really good, from Corning.
There's a video on youtube where a guy tried to scratch his screen with keys about 30 times and it didn't scratch at all.
I haven't heard about anyone getting a scratch yet, and I'm not going to put on a screen protector.
May not need one on the DroidX.
Has anyone gotten a scratch yet?
Errant911 said:
There really isn't a "best" screen protector. It depends on what you want in a screen protector. There are two main types, the kind that uses static adhesion (think the plastic sheet that was on the screen when you bought it) or the kind that uses a liquid adhesive. (like Zagg Invisible shield) The liquid adhesive ones typically have better protection, but can cause more distortion and are known to more severely affect the feel of the touch screen. They can also be a ***** to put on, prepare to spend at least 30 minutes to do a proper job, and you won't be able to use your phone for 24-48 hours while it dries. However, if you are really worried about getting the best protection, go for that.
Static adhesion ones are probably going to work for the majority of people, especially since the Droid X has Gorilla glass and many people say you don't even need a screen protector at all. I believe SGP (also known as Steinheil) makes high-quality static adhesion protectors, but they may be out of stock at the moment. I'm probably going to get an SGP for my DX when they get back in stock. Go for the crystal or ultra-crystal, i've heard reports that the anti-glare or anti-fingerprint affect the feel/drag and look of the screen more than the crystals.
tl;dr Get an SGP (Steinheil) crystal or ultra-crystal
Click to expand...
Click to collapse
Yea those ultra crystals look pretty good. Ive never used an adhesive one before though... i dont really like the sound of it either. I've used the water ones and they work ok...
http://www.sgpstore.com/advanced_search_result.php?keywords=droid+x&x=0&y=0
These are the best ive found, and I have gone through FOUR brands now looking for what I want, including the verizon one.
The crystal clear ones are exaclty that -- crystal clear screen prots with adhesive on one side and a protective film on the other that you peel off the front when you are done applying the protector. THIS IS NOT THAT ZAGG POLYVINYL crap. I hate that stuff.
The anti-fingerprint ones are also nice, I have those too. They are a bit "cloudy" like the verizon ones, but your finger glides over them fantastically, and they reduce glare.
The best part is -- THEY COVER THE WHOLE SCREEN AREA! I wanted that especially. Enjoy!
well i think I am going to buy the crystal one... i just hope its not hard to put on. Im not the best at putting those sticky ones on
Zagg
Zagg works for me:
http://droidxaccessories.com/droid-x-accessories/droid-x-screen-protector-from-zagg/
and mirror from Amzer is good too:
http://droidxaccessories.com/droid-x-accessories/droid-x-mirror-screen-protector/
Izord, what is this "gorilla glass" your taking about on the X? I've never heard of this before...
Sent from my DROIDX using XDA App
http://androidforums.com/motorola-droid-x/135622-scratch-resistant-gorilla-glass-droid-x-lie.html
Sent from my DROIDX using XDA App
You don't need to use screen protectors on the Droid X. As stated before it has Gorilla Glass. If something happens that is strong enough to scratch Gorilla Glass a little plastic screen protector isn't going to stop it.
Steinheil Ultra Crystal is the best, hands down!
In my option, the best protector is the Steinheil Crsytal. I had it on my Incredible, my brother still does, and now I have the Steinheil Ultra Crystal on my DX. It keeps the screen perfectly glass looking, as if there is nothing on it, allows for easy sliding, and is nice and thick to protect the screen. In my opinion, you can't beat it.
With shipping I paid 17.25 for it... comes with 2 protectors. They initially lost my order, so they sent me another, and guess what? The original showed up. So now I am expecting another at the end of this week/beginning of next.
If anyone is interested in it, I would be happy to sell it since I obviously don't need it. Let me know. I also have an extra TPU argyle (dark gray) case that I would be willing to sell if the price is right. I paid 8 dollars, shipped, for it.
In my opinion, the SGP Ultra Crystal is by far the best protector for the X.
I've had the VZW protector, which was horrible, and I've also had a privacy guard. Though the privacy guard did keep my phone private, the touch screen functionality wasn't great because the privacy guard was too thick.
I ended up with the SGP Steinheil ULTRA CRYSTAL Screen Protector and I love it. It's so clear, and it almost feels like there is nothing on the screen, but it's pretty thick compared to others; thick enough to provide excellent protection and not hinder touch screen functionality.
djdominus said:
You don't need to use screen protectors on the Droid X. As stated before it has Gorilla Glass. If something happens that is strong enough to scratch Gorilla Glass a little plastic screen protector isn't going to stop it.
Click to expand...
Click to collapse
Im with this guy ^^
djdominus said:
You don't need to use screen protectors on the Droid X. As stated before it has Gorilla Glass. If something happens that is strong enough to scratch Gorilla Glass a little plastic screen protector isn't going to stop it.
Click to expand...
Click to collapse
Actually, Gorilla Glass can be scratched. I've managed to get a really bad 3 MM wide scratch on my Zune HD, which has Gorilla Glass as well. I've heard of similar reports of scratches on devices with Gorilla Glass. So in other words, these screens aren't scratch proof. They're scratch resistant.
Errant911 said:
There really isn't a "best" screen protector. It depends on what you want in a screen protector. There are two main types, the kind that uses static adhesion (think the plastic sheet that was on the screen when you bought it) or the kind that uses a liquid adhesive. (like Zagg Invisible shield) The liquid adhesive ones typically have better protection, but can cause more distortion and are known to more severely affect the feel of the touch screen. They can also be a ***** to put on, prepare to spend at least 30 minutes to do a proper job, and you won't be able to use your phone for 24-48 hours while it dries. However, if you are really worried about getting the best protection, go for that.
Static adhesion ones are probably going to work for the majority of people, especially since the Droid X has Gorilla glass and many people say you don't even need a screen protector at all. I believe SGP (also known as Steinheil) makes high-quality static adhesion protectors, but they may be out of stock at the moment. I'm probably going to get an SGP for my DX when they get back in stock. Go for the crystal or ultra-crystal, i've heard reports that the anti-glare or anti-fingerprint affect the feel/drag and look of the screen more than the crystals.
tl;dr Get an SGP (Steinheil) crystal or ultra-crystal
Click to expand...
Click to collapse
The "Scratch Test Guy" did in fact, scratch his screen. He said it happened with sand. So yeah... might wanna be careful around sand.
Bought a zag, like it.
Sent from my DROIDX using XDA App
SGP Steinheil ULTRA CRYSTAL Screen Protector +1
it's awesome. It comes with two, and I botched the first one... many would say it was fine, but I had like one spec of dust under it, removed, recleaned, reapplied number 2... it's AWESOME. I don't use a bumper or anything big and latexy around the outside of my phone, just a Steinheil on the screen, and nothing else. It's CLEAN.
SGP Ultra Crystal. Just put it on and I can safely say I'm very impressed. You really can't tell there's anything there imo. It was a pita to figure out how to put it on...at least for me. I had to watch a you tube video to realize there are actually 3 layers to each screen protector when first taken out of the package. Piece of cake after that. Gotta be smarter than the screen protector I guess.
Sent from my DROIDX using XDA App
After dealing with half a dozen screen protectors for my past 3 phones, Including Zagg, Seidio, and a bunch of other cheapies... I really recommend the Boxwave Crystal Touch.
It is literally the easiest thing I have ever applied, from out of the package to on my phone perfectly in less than a minute. You cannot even tell it is on your phone.
nG
Save yourself money and time by going to a nearby Verizon store and get a pack of 3 "clear" screen protectors for $13 (even cheaper if you have corporate discount). They are PERFECT!!! I can't even see the screen protector, especially when the edges are covered by the Silicone case, both while the screen is ON and OFF!!! The first time I didn't know and they gave me the "anti-glare" one, man...those really kill the sharpness of the screen with the grainy look. You can even see them while the screen is OFF. So I riped that perfectly-installed protector off and thought I would never want to use ANY screen protectors again for this beatiful screen. But then I see in one thread of someone saying that there are two types of Verizon screen protectors, "clear" and "anti-glare", and the clear one is pretty good. I stopped by the store after work today and grabed a pack that includes 3 protectors (for trial-and-error ). After 5 minutes, both mine and my wife's Galaxy Nexus looks flawless with the screen protectors on. Man I love this thing, it's completely invisible and not affecting the screen resolution or sensitivity at all. Just my quick review as the result of the excitement .
And PLEASE....search for the "tape trick" on youtube show you how to lift the installed screen protector up and get the last piece of lint/dust out without using your nails or messing up the whole installation.
Goodluck
P.S. yes, the Silicone case does fit Galaxy Nexus with extended battery.
Does it completely cover screen in a perfect fit I had the anti glare and it was still off in size just a little bit
Yeah....it's like a millimeter or two from reaching the outer edge/rim. But I use Verizon's silicone case, so it wraps around and cover the transition good.
It covers the entire display portion of the face but does not cover the entire glass
Fail post op. Go get three on ebay for $3. I lmfao
Sent from my Galaxy Nexus using xda premium
I can already see that they don't look identical. The Verizon version circle/flush around the earpiece speaker nicely, whereas the eBay version only encircle bottom and sides of the earpiece speaker. The Verizon version covers the glass almost completely, almost.....it only like 1-2mm from reaching the edge of the glass. I see many other screen protectors where they only protect the main portion/center of screen and not covering the remaining of the glass just below the Home/Back/Talk buttons.
I think the VZW screenies are fine. I don't like the rubber feel of the expensive one. I'm sure there more durable but the verizon one are nice and clear. Not bad
Sent from my Galaxy Nexus using Tapatalk
i also just grabbed them in the store. also very surprised by the quality and extremely satisfied
While I like the material of the VZW screen protector, I'm not a fan of how it fits. It looks too small, as there's about a 1mm gap between the edge of the screen protector and the edge of the screen itself.
bangarang said:
While I like the material of the VZW screen protector, I'm not a fan of how it fits. It looks too small, as there's about a 1mm gap between the edge of the screen protector and the edge of the screen itself.
Click to expand...
Click to collapse
You have to watch though. If you aren't using a case, I think you can go with other brands that cover the entire screen. If you are running a case plus the entire screen protector, sometimes the case contacts the screen on the sides and creates bubbling. I've had it happen to a few of my phones. I'm using the verizon silicone case and their SP and no bubbling because of the gap..
I was suckered into the Verizon Screen protectors. They DO NOT reach edge to edge. They just cover the lighted portion of the screen. I never even applied one. I pulled it out and said, "Awww".
Anyone wants them, PM me. I'll sell them 50% off = $6 shipped. 3 in a pack / $6 = $2 a piece.
player911 said:
I was suckered into the Verizon Screen protectors. They DO NOT reach edge to edge. They just cover the lighted portion of the screen. I never even applied one. I pulled it out and said, "Awww".
Anyone wants them, PM me. I'll sell them 50% off = $6 shipped. 3 in a pack / $6 = $2 a piece.
Click to expand...
Click to collapse
just go back and return them I went ahead and did that with the anti glare ones yesterday shouldn't be an issue
i like the vzw clear - as someone else said only millimeters from the edges.
I initially tried the antiglare ones but they made the screen horrible to look at.
Do these provide any real protection? Or just from light scratches? Obviously they won't be as safe as gorilla glass or similar products, but I don't throw my phone around, so I don't need anything super protective.
The ones I bought from Verizon have about 3mm of space from edge of the phone. They aren't clear, more like a matte finish. Weird. But I hate to have a naked screen so I bought them anyways. I have a zagg, some ebay screens, and an xtreme guard screen in the mail.
i really like the VZW clear protectors... i measured less than 2mm gap all around, and you wont find an edge to edge dry protector because of the curvature of the screen at the edges.
I bought the Incipio 2 piece case and the Verizon screen protector. I really like the Incipio case over the Otterbox Commuter. I had the Commuter on my Fascinate and the plastic was slippery. The coating on the plastic on the Incipio reminds me of the rubber coating on Seidio cases.
The Verizon screen protector is okay. It is clearer then the SGP Ultra Crystal and my fingers glide over it pretty easily. However, I've already gotten couple scratches on it. I plan on getting the XO SKINS.
phiquantu said:
Save .
And PLEASE....search for the "tape trick" on youtube show you how to lift the installed screen protector up and get the last piece of lint/dust out without using your nails or messing up the whole installation.
Click to expand...
Click to collapse
Hey, could anyone help me out with the "tape trick" he is referring to? Can't seem to find anything about it.
Thanks
mrlocus said:
Hey, could anyone help me out with the "tape trick" he is referring to? Can't seem to find anything about it.
Thanks
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=m4XgS1ONg9s
Thanks for the link! Awesome trick
I'm not sure about the rest of you, but for now it seems like we can't get a good screen protector for the S3. All the flexible film based protectors dent too easy. This includes protectors like the SGP Curved Crystal. This review below clearly shows what I mean about easily denting. It also has issues with tight fitting cases.
Then if we go for a screen protector that doesn't dent so easy, they end up not covering enough of the screen. The SPG Ultra Clear nano and Ultra Crystal (2nd version) both don't dent like the Curved Crystal, but they don't cover enough of the screen. Especially the sides. So swiping near the edges you can easily feel the ridge. Ruins the smooth experience of the S3. Would be nice if Spiegen does a revision of the Curved Crystal like they did with the Ultra Crystal and made it so it didn't dent so easily. I definitely don't want to go with tempered glass as its just too thick. I am currently using a Realook Flex Film, and it covers the whole screen nicely, but has orange peal and dents easy just like the other flexible films out there. Realook now has a "3D forming crystal clear" protector. It covers the whole screen and uses their PET material for the main part of the screen, which should prevent the denting effect. I'll give this one a try, if it's not that great, I may just use no protector and go with a flip case. Anyone else have any suggestions.
Here's a pic of what I mean with not covering the whole screen for the Spigen SGP screen protectors.
This is what I just bought.. not sure when it's going to arrive but it should fit your criteria better?
http://www.ebay.com/itm/261072327014?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Ignore that link. I just recieved it and it doesn't cover the whole screen completely.
Search for the threads. There has been plenty of this
Sent from my SGH-T999
Xcor3 said:
Search for the threads. There has been plenty of this
Sent from my SGH-T999
Click to expand...
Click to collapse
To be honest, I've searched far and wide through the threads and Spigen seems to be the protector of choice. But once I look at reviews of those protectors elsewhere (like the YouTube video I posted) I end up seeing that they're not that great. I'm beginning to think that we have to go with either the flip cover protector or go with a hard film protector that doesn't cover the whole screen in order to get that glass like experience. All the soft film based protectors just dent to easy or have some orange peel effect. It just ruins the beautiful display of the S3.
Tempott said:
I'm not sure about the rest of you, but for now it seems like we can't get a good screen protector for the S3. All the flexible film based protectors dent too easy. This includes protectors like the SGP Curved Crystal. This review below clearly shows what I mean about easily denting. It also has issues with tight fitting cases.
Then if we go for a screen protector that doesn't dent so easy, they end up not covering enough of the screen. The SPG Ultra Clear nano and Ultra Crystal (2nd version) both don't dent like the Curved Crystal, but they don't cover enough of the screen. Especially the sides. So swiping near the edges you can easily feel the ridge. Ruins the smooth experience of the S3. Would be nice if Spiegen does a revision of the Curved Crystal like they did with the Ultra Crystal and made it so it didn't dent so easily. I definitely don't want to go with tempered glass as its just too thick. I am currently using a Realook Flex Film, and it covers the whole screen nicely, but has orange peal and dents easy just like the other flexible films out there. Realook now has a "3D forming crystal clear" protector. It covers the whole screen and uses their PET material for the main part of the screen, which should prevent the denting effect. I'll give this one a try, if it's not that great, I may just use no protector and go with a flip case. Anyone else have any suggestions.
Here's a pic of what I mean with not covering the whole screen for the Spigen SGP screen protectors.
Click to expand...
Click to collapse
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
I use the screen protector that came with my otterbox case and it has served me well so far. It doesn't cover the whole screen but then again, if it did it would come off when I used a case.
werked said:
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
Click to expand...
Click to collapse
I use the genuine Samsung Super Slim case which I feel gives the scratch protection I need for the back and sides of the phone, while adding practically no bulk to the phone. So an edge to edge screen protector would have no issues for me. If only Spigen would use the same material they use for the Ultra Nano or Ultra Crystal in their Curved Crystal protector it would be perfect. It's really too bad the Curved Crystal dents/creases so easily as shows in the above video.
I like what zagg did for the iPhone. They make a case friendly screen protector. I like having that option. If you plan to use a case then it's a perfect choice. If going to use no case or a snap on case then a regular screen protector suits just fine. It would be nice for companies to show android some love in this respect of options.
werked said:
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
Click to expand...
Click to collapse
you can pick up the SGP Flex HD. They cover the entire screen, and is hard to see that it is actually there. It feels smooth as well. Also it doesn't leave much finger prints on there
It seems you haven't looked hard enough, I have a thread on a skinplayer 3D mask film, 99.5% full coverage and has a self healing surface, flexible PET screen protector.
I use the zagg invisishield. Best one I've used yet. I also use it on my tablet. It's more expensive, but worth it. Of course I got mine from best buy the second day the phone was out. So there were only two to choose from ,and I didn't want to wait for one to be shipped to me.
It's designed to fill itself in for minor dents and scratches (I possibly butchered that explanation, but I think you understand). Also, it can be removed and reapplied.
The best part though, is that it's so clear it doesn't detract from the screen. In the past when I would use a screen protector it would always look like a filter was on my screen. Hated it. They've come a long ways in that aspect.
Sent from my SPH-L710 using xda app-developers app
I noticed nobody mentioned Wrapsol. Their ultra line is pretty tough. It comes with a back protector too.
adamdavidson said:
I noticed nobody mentioned Wrapsol. Their ultra line is pretty tough. It comes with a back protector too.
Click to expand...
Click to collapse
not 100% coverage, but excellent quality.
I hate when people ask about screen protectors because that means they obviously don't know about the best one out there. It is called clear-coat. Google it. Ive had it on all my phones. It is perfect. It doesn't come off unless you peel it off and leaves no residue behind. Most malls have a station that sells it and puts it on for you. If you watch videos of it you will see a guy scratching his iphone against rock and then peeling it off and no marks on the screen. Best way to go by far. It is also covered by a lifetime guarantee.
Skinomi - - - - very nice!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Seidio
Sent from my HTC EVO 4G ELTE using Tapatalk 2
Can't believe no one said real look screen protectors.
Sent from my JellyBean Galaxys3
Vikuiti!
I'm currently using Vikuiti screen protectors, and they're working out pretty well. It attracts fingerprints a bit, but nothing a quick wipe doesn't get rid of~
I'm not really so sure why everyone is so worried about the very edges of the screen that the Ultra Nano doesn't cover. It's a great protector that you can barely even tell is there, and it covers all of the important and useful parts of the screen just fine. I've been using it for 2 months and it still looks great, plus I've had no issues at all with scratches on the edges that aren't covered. Using it with a Diztronic TPU case. Put a case on your phone and the combination seems perfect to me.
I've been using vikuiti ( a less mentioned brand for screen protectors I think) and it's been working perfectly fine with the genuine galaxy s3 clear TPU case. No scratches on the phone or screen protector, I never really understood how people had to cycle through so many screen protectors. Best of luck to you finding your preferred sp!
is there such thing aside from the spigen curved one? i heard the spigen ones are garbage. i've used skinomi (they were all right, not as durable), they covered 95% of the screen. the zagg invisible shields were garbage, wasted 25$ and thought it covers the whole screen but it left a huge gap.
Try Tippin Screen protector.
tippin is where its at for full curved protectors.. just remember any case that wraps around the edge tightly is probably not compatible
Does this tippin cover as good if not better than SGP Curved Crystal? The reason I ask is the images on Amazon show that it does not cover the portion immediately above the ear speaker. I love the curved crystal except for the dents that won't disappear. Does the tippin have this problem? Thanks!
the tippin pretty much covers all. ear speaker, sensors+camera, and home button are cut out. if you press on it hard enough with your nail, itll leave a dent. will it go away eventually? dont know, probably not. i think the tippin scratches kind of easily. i noticed a small rainbow line. not sure if its a scratched screen protector or cracked glass. another thing about these screen protectors...you have a small margin for error for placement. i was ocd at first and wanted it on 100% perfect alignment. i tried the tape the side method. thought i had it on perfect, but nope. a small sliver didnt stick because it was on slightly to the left. took the whole thing off and could not put it on as good as before. i spent almost an hr, gave up and ended up with even worse alignment. so my advice is get it aligned the way you want it on the 1st try. since these were a ***** to apply, id like a screen protector thats between full and gapped coverage. but the clarity is good and i think it gets slightly less fingerprints than the naked screen.
aznblade said:
is there such thing aside from the spigen curved one? i heard the spigen ones are garbage. i've used skinomi (they were all right, not as durable), they covered 95% of the screen. the zagg invisible shields were garbage, wasted 25$ and thought it covers the whole screen but it left a huge gap.
Click to expand...
Click to collapse
The Spigen is good. I would say they are far superior to the Skinomi ones.
I went this route. This is now in my top spot for screen protectors.
http://chrismchoi.blogspot.com/2013/03/seidio-vitreo.html
This is what I use. It covers the entire screen and is smooth. It also seems to repel fingerprints and is somewhat scratch resistent. Most people looking at my phone can't even tell there is a screen protector on it.
http://www.amazon.com/REALOOK-Prote...=1362606630&sr=8-1&keywords=galaxy+s3+realook
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
j76ms said:
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
Click to expand...
Click to collapse
I don't notice any dents, but I use swype as my keyboard of choice. Do you push hard when texting? I let my 4 and 6 year old use my phone often, and I still don't notice much wear. There are a couple of tiny scrathes on my screen protector, and they are only noticeable in direct light at certain angles. I have had the protector on for about 3 months. My old protector (Zagg HD) showed fingernail dents and nicks about a week after I put it on.
j76ms said:
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
Click to expand...
Click to collapse
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Jottle said:
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Click to expand...
Click to collapse
Thanks Jottle. I was thinking it is probably the same material as the curved crystal. I have found 3 cases that the full coverage works with: UAG, Eclipse Element and SGP Modello. I love the look of the full coverage with these cases but with the dents, I have to replace the protector about once every 2 months.
Jottle said:
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Click to expand...
Click to collapse
I am currently using the Seidio Surface case with my Realook screen protector. It works without any problems. I have also used the Rock Quicksand case and the Incipio Sylicriic without any issues.
Moozh1 said:
I am currently using the Seidio Surface case with my Realook screen protector. It works without any problems. I have also used the Rock Quicksand case and the Incipio Sylicriic without any issues.
Click to expand...
Click to collapse
Just wanted to add that I've now tried the Tippin full coverage screen protectors as well. They are incompatible with my case as well. There are some tpu cases that will work with full coverage protectors. But the extremely tight ones that barely cover the corners will not.
Has anyone bought this screen protector for the N5? I'm considering it since I want a fingerprint-resistant screen protector, but I don't know whether the cut outs will be faulty as their clear screen protector...
If not any other recommendations for a fingerprint-resistant screen protector for N5?
Link to it
http://www.spigen.com/nexus-5-screen-protector-glas-t-slim-premium-tempered-glass.html
I'm a huge spigen fan, considering the GLAS.tR SLIM as they say the t non-rounded chips more easily?
Has anyone used these?
My TR screen should be coming in today. First time using a glass screen, high expectations.
garyHal said:
My TR screen should be coming in today. First time using a glass screen, high expectations.
Click to expand...
Click to collapse
I have been using one on my iphone and love it. Never going back to normal screen protectors.
Rattles said:
I have been using one on my iphone and love it. Never going back to normal screen protectors.
Click to expand...
Click to collapse
2nd that. Have used one on an S4 and loved it. Ordered one for the N5. Should be in this week - can't wait.
garyHal said:
My TR screen should be coming in today. First time using a glass screen, high expectations.
Click to expand...
Click to collapse
please post some pics i've bought the tR last week and i'm waiting it too
There's been high praise for the Spigen glass protectors so I ordered the GLAS.t SLIM. I think the cheaper of the two should provide enough protection as I generally take care of my phones pretty well. The lower profile of the GLAS.t seemed better for me although the rounded corners of the GLAS.tR would have been nice.
I've used cheaper anti-glare film screen protectors in the past, and they worked but didn't last long due to normal wear and tear, so I'm hoping this glass screen protector goes the distance. I hate applying new screen protectors =/
Edit: As for the recommendations, I would NOT advise Clarivue anti-glare. It works well initially but diminishes screen quality and the anti-glare coating wears out quickly in higher-use areas like where the keyboard is. Went through three in the past year.
If you're in Canada, they are now fulfilled by amazon.ca, that means free shipping! http://www.amazon.ca/SPIGEN-Protect...id=1383316041&sr=1-12&keywords=spigen+nexus+5
I'm really interested in getting the glass.t or glass.tr protectors. However, one thing that has always worried me about tempered glass protectors is the possible space between the screen and the protector.
Since glass protectors are not flexible, but the protector and actual screen must be perfectly flat or there will be bubbles due to points of non-contact between the two. Does anyone have experience applying one, and do they fit well together or are there problems?
EDIT: Also, would these protectors work with the Spigen cases or would the extra thickness cause a problem?
Anyone got theirs yet? I'm thinking of getting the GLAS.t Slim since I'd prefer the thinner one.
I'm wondering if the upper lip on the Spigen cases will actually cover the edges of the protector or if there will be a gap. Since I'm planning to use it in combination with a case, if the case covers the edges of the protector I can't see any advantage of the GLAS.tR Slim.
I've also read some other glass protectors have a grid of dots on them. I think this would really annoy me. Do the Spigen protectors have this?
Do they affect viewing angles at all?
Finally, is a cracked or shatter glass protector likely to scratch up the screen? They are of similar hardness...
Thanks.
I turst Spigen
I have not tried the tempered glass on Nexus 5, but I would trust Spigen products all time, they are getting very positive review on Amazon as well, so I would say go for it and I believe they have the money back guarantee, so why to worry
Xodus22 said:
I'm really interested in getting the glass.t or glass.tr protectors. However, one thing that has always worried me about tempered glass protectors is the possible space between the screen and the protector.
Since glass protectors are not flexible, but the protector and actual screen must be perfectly flat or there will be bubbles due to points of non-contact between the two. Does anyone have experience applying one, and do they fit well together or are there problems?
Click to expand...
Click to collapse
I have the Sir Lancelot Armor-Holy Grail for my N4. I have tried them all. First off stay away from Clarivue and Maru, both are just not good.
Haven't tried any others since SLA and ILoome(which have GREAT customer service!) on my N4, so I hope the Spigen can play well with the hybrid case!
The Spigen site recommends using a case along with their GLAS products, so I'm going to assume they fit cases (or at least Spigen cases) just fine.
b.spec said:
The Spigen site recommends using a case along with their GLAS products, so I'm going to assume they fit cases (or at least Spigen cases) just fine.
Click to expand...
Click to collapse
I remember using a SGP screen protector three years ago. I had tried two. The adhesive was bad and it curled off my phone.
FloppyDrive said:
I remember using a SGP screen protector three years ago. I had tried two. The adhesive was bad and it curled off my phone.
Click to expand...
Click to collapse
I've heard this from some people as well. I personally will keep my phone without a case or a bumper at the most, so I can't speak from experience. If it's a wet application screen protector, it's probably much more likely that it will curl off since those tend to extend to the edges of the screen.
Here's what is on the Spigen site:
As this is a glass product, please note that the edges of the glass are the most vulnerable areas. We highly recommend that you use a case along with your GLAS.t SLIM to avoid chipping or cracking the edges of your GLAS.t SLIM
Click to expand...
Click to collapse
tmagritte said:
Since I'm planning to use it in combination with a case, if the case covers the edges of the protector I can't see any advantage of the GLAS.tR Slim.
Click to expand...
Click to collapse
I believe the point of the tR is precisely to be used without a case (the tR product page doesn't have the paragraph about using it with a case to protect the edges). So if you're going to use a case, get the t, if not you should get the tR.
I used the glas TR with my work iphone, and they're fantastic. Very durable and they almost feel better than the naked screen. I have one on order for the N5, but not sure if ill put it on right away. You can't go wrong with one of these though, well worth the money if you are looking for long lasting screen protection.
From Spigen's website:
GLAS.T - Our first and original GLAS.t screen protector. Made of real tempered glass and premium silicone adhesive. It is about 0.4mm thick.
GLAS.tR - The "R" stands for rounded. This glass protector has beveled edges to to help prevent chipping on the edges of the glass. Recommended for users that are not using a case or a minimal case design. About 0.55mm thick.
GLAS.T Slim - We've made our popular GLAS.t even slimmer. Same concept and material as our GLAS.t, but it ranges from 0.23-0.26mm depending on the product.
GLAS.tR Slim - Also the rounded version of the GLAS.t Slim. The thickness is about 0.4mm
Click to expand...
Click to collapse
I'm having some trouble with the GLAS.tR. I just installed it, and the bottom left corner is not sticking, and there is a spot that's not sticking on the right side of the headset speaker. I'm trying to leave some weight on top of it and see if that will fix it.
wormbaby11 said:
I'm having some trouble with the GLAS.tR. I just installed it, and the bottom left corner is not sticking, and there is a spot that's not sticking on the right side of the headset speaker. I'm trying to leave some weight on top of it and see if that will fix it.
Click to expand...
Click to collapse
same here! I have three rather large "bubbles" (though thankfully none are on the screen), one of which is in the bottom left corner. When I apply pressure, it reduces to a tiny bubble, but after about a minute, it will have expanded again. I tried putting a textbook on top overnight, but this morning when i lifted the book, it just grew back in a minute.
If it doesn't fix itself in another 24 hour, I'm going to call Spigen.