Develop Bugs

And another radio problem...

Hey guys,
I read quite a lot of posts about cm7.2.0 RC 1, the buzz and GPS troubles.
Oh yeah - the surprise: also my GPS doesn't work anymore. Last cyanogenmod version i used: 7.1 stable.
So i reflashed the radio. Source:
HTML:
http://wiki.cyanogenmod.com/wiki/HTC_Wildfire:_Support_Downloads
First i tried 3.35.20.10 then 3.35.19.25 because the first one(latest!?) didn't worked, second neither.
What else can I do?
cYa

What didn´t worked?
The install of the radio with an error in cwm or the gps in your phone when using an app after the re flashing the radio?
If it is the first one, use cwm 2.5.0.7 i belief (but i think u already done that)
If it is the second one, turn gps on or otherwise i dont know. Hope someone els can help u then.
Hazou

the gps itself...
but on the otherside, maybe both
I checked if the flashing of the latest version worked(cm settings), turned it on, but the gps didn't worked. then I flashed a older (one-step) version. actually don't know if it's older. it was the second of the list(link above).
but now the cm setting is telling me I have the same radio installed as I had before flashing anything?!
where can I find this cwm version?
-thanks for your answer!!

Try flashing a new radio by fastboot method.Flashing a new radio via CWM never worked for me,even with CWM v2.5.0.7.I flashed 3.35.19.25 and my GPS works perfectly.

Wasimk32 said:
Try flashing a new radio by fastboot method.Flashing a new radio via CWM never worked for me,even with CWM v2.5.0.7.I flashed 3.35.19.25 and my GPS works perfectly.
Click to expand...
Click to collapse
... so exactly this happens to me when I use CWM v2.5.0.7. Anything to do before that? I never used fastboot before? Just press vol-down + pb? *smile*

scarfur said:
... so exactly this happens to me when I use CWM v2.5.0.7. Anything to do before that? I never used fastboot before? Just press vol-down + pb? *smile*
Click to expand...
Click to collapse
LOL..there is hardly any space button between Thanks and quote buttons
anyways,I followed this guide and it workded for me.
http://forum.xda-developers.com/showthread.php?t=1588725

^ ^ maybe a mod can redo this?
thanks mate I will try this now - follow your link! cYa

scarfur said:
the gps itself...
but on the otherside, maybe both
I checked if the flashing of the latest version worked(cm settings), turned it on, but the gps didn't worked. then I flashed a older (one-step) version. actually don't know if it's older. it was the second of the list(link above).
but now the cm setting is telling me I have the same radio installed as I had before flashing anything?!
where can I find this cwm version?
-thanks for your answer!!
Click to expand...
Click to collapse
So you turned the gps on and then? U started an app like maps or gps fix that will use the gps? If u don't there will be no gps icon in the status-bar.
But maybe the fastboot method works

Problem with GPS

Hello.
I have problem with GPS on my Wildfire. What's the problem ? The GPS doesn't work. I have flashed the radio but it's still doesn't work. Can you help me to solve this. My ROM is CyanogenMod 7.
I had similiar situation a few months ago, and I flashed Radio and it worked.
Please help me

Hi there
When activating GPS on your Wildfire on CM7 it doesnt show up in the status bar until you open an app like Google Maps to get your location.
You may not have a problem with your GPS but just cannot seem to find it i had the problem with mine when ifirst rooted.
To test if it is working download GPS Test from the Play store and when you open the app and turn GPS on the symbol for GPS should appear!
Hope i can help

Depends upon which version of CM7 you flashed. Some radio's work with a particular kernel and some don't.
Flash the correct radio it will work.

Or just try to flash another kernel
For me it works fine with latest radio and nFinity kernel on CM7.2

Try to flash another kernel. Sometimes kernels are involved in malfunction of services like GPS or WiFi. If that doesn't work, reflash the radio but make sure that you don't have a custom mtd partition. If you do, revert the mtd size back to stock and then reflash the radio. I had the same problem with you and tried to reflash the radio but it didn't work because i had custom mtd partitioning.

I had the same problem
Someone suggested me the AGPS patch.. it worked for me..
In fact its a charm..
Here the link.. http://forum.xda-developers.com/showthread.php?t=1447591
HIT THANKS IF I HELPED YOU

Following this topic http://forum.xda-developers.com/showthread.php?t=1678580 I reflashed my RADIO 3.35.20.10 from http://wiki.cyanogenmod.com/wiki/HTC_Wildfire:_Support_Downloads with fastboot and now GPS works.
fastboot flash radio radio.img
Good luck

DMarzal said:
Following this topic http://forum.xda-developers.com/showthread.php?t=1678580 I reflashed my RADIO 3.35.20.10 from http://wiki.cyanogenmod.com/wiki/HTC_Wildfire:_Support_Downloads with fastboot and now GPS works.
fastboot flash radio radio.img
Good luck
Click to expand...
Click to collapse
Just as a hint: you can also find all the Wildfire stuff in The complete Wildfire index (partly with short descriptions)
You could also flash a new/different radio with Clockworkmod but you'd need Clockworkmod 2.5.x for that, newer versions won't do.
I also knew of other people who flashed the "older" radio and got it to work. The aGPS patch is just a speed improvement - if your gps.conf isn't corrupted accidentially it won't help if GPS doesn't work at all

Rather than trying to install any CWM flashable GPS fix.zip, go to the Play store and install FasterGPS:
https://play.google.com/store/apps/...ult#?t=W251bGwsMSwxLDEsIm9yZy5mYXN0ZXJncHMiXQ..
It is working great for me on my CM 7 install on Wildfire S. I get 9-10 locks in 10-15 seconds.
Good Luck!

sikander3786 said:
Rather than trying to install any CWM flashable GPS fix.zip, go to the Play store and install FasterGPS
Click to expand...
Click to collapse
If his GPS doesn't work at all I doubt this will help.
Just for clarification: radios aren't just flashable GPS fixes they're the lowest system layers on your phone and responsible for more than just GPS.
I get 9-10 locks in 10-15 seconds.
Click to expand...
Click to collapse
for improving GPS lock speed you don't need an app. I just replaced my gps.conf with the same result (link in my sig)

eventcom said:
If his GPS doesn't work at all I doubt this will help.
Click to expand...
Click to collapse
If "GPS doesn't work at all" means that it doesn't lock successfully, then it is the same state that I was experiencing with CM 7. FasterGPS worked for me that is why I suggested it. No harm in giving it a try anyways.
Yes I know, FasterGPS doesn't do anything else rather than replacing the default gps.conf. The app isn't such a feature-rich app rather it just simply allows tweaking some gps.conf parameters. And it backups your original gps.conf in case you want to un-install it.

sikander3786 said:
If "GPS doesn't work at all" means that it doesn't lock successfully, then it is the same state that I was experiencing with CM 7. FasterGPS worked for me that is why I suggested it. No harm in giving it a try anyways.
Click to expand...
Click to collapse
of course. Since this was his first and only post and he didn't answer to one of the responses for about a month I guess we won't find out what exactly "don't work" means
Regarding FasterGPS: one of the reasons I rooted my phone has been to gain more RAM, space and control. Anytime I have an easier way to adjust settings than to use an app I'll try to do so as this saves space - but this is just my personal opinion and I've also used apps to adjust only one tiny setting in the phone - luckily if we own a rooted device we can decide ourselves.
I'd like to quote forum member slymobi who found the best of all words for it:
slymobi said:
This is the beauty of android?... MAKE YOUR PHONE YOUR OWN
Click to expand...
Click to collapse

Downgrade from CAN-L11C432B320 (EMUI5/7.0) to CAN-L11C432B100 (EMUI4.1/6.0)

hey community
I've tested CAN-L11C432B320 a while and miss the equalizer-app, also have an extreme powersaving device (...) but if i'm running runtastic they will turn off gps after 30 seconds display-off-time, background-services like whatsapp, pushbullet, etc.. will close after a few hours "inactivity", bad fingerprint-performace, some xposed-plugins have massive battery-drain and wont work....
so on.. i still search a while if its possible to get my stock emui 4.1 back...
...and yesterday i found this post:
h**p://w*w.htcmania.com/showthread.php?p=24388723
it looks like there was a full CAN-L11C432B100 and CAN-L01C432B100 firmware but i could not install them
i put the update.app in SDCARD:\dload and tried to install them with original EMUI5-recovery and the extracted EMUI4.1-recovery - everytime it hangs up at 5% and reboots after ~5 minutes.
i'm clueless.. maybe someone will also downgrade and found a solution how to get them work...
sorry from my bad english and the link-modification but i'm new here

I think we need to flash first the EMUI 4.1 recovery.img

Houamei said:
I think we need to flash first the EMUI 4.1 recovery.img
Click to expand...
Click to collapse
i've flash erecovery.img and recovery.img extracted from the update.app --> reboots too on 5%
extracted 4.1 Recovery: mega.nz/#!1MdXmART!Bbd3COTNnCsOB4iVMwQ0vOQhdEvzWDaWVnRhMwFMg08

xCite86 said:
hey community
I've tested CAN-L11C432B320 a while and miss the equalizer-app, also have an extreme powersaving device (...) but if i'm running runtastic they will turn off gps after 30 seconds display-off-time, background-services like whatsapp, pushbullet, etc.. will close after a few hours "inactivity", bad fingerprint-performace, some xposed-plugins have massive battery-drain and wont work....
so on.. i still search a while if its possible to get my stock emui 4.1 back...
...and yesterday i found this post:
h**p://w*w.htcmania.com/showthread.php?p=24388723
it looks like there was a full CAN-L11C432B100 and CAN-L01C432B100 firmware but i could not install them
i put the update.app in SDCARD:\dload and tried to install them with original EMUI5-recovery and the extracted EMUI4.1-recovery - everytime it hangs up at 5% and reboots after ~5 minutes.
i'm clueless.. maybe someone will also downgrade and found a solution how to get them work...
sorry from my bad english and the link-modification but i'm new here
Click to expand...
Click to collapse
There is a link for a rollback update, but i'm not home. When I get there, I send it. About battery, try to use greenify to help it to last long.
You can't just try to use a full package because of versioning scheme they use.

Here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v72696/f1/full/update.zip

Same problem here, still drops at 5% even with the new file
I just wana know the best way to revert to stock
---------- Post added at 07:32 PM ---------- Previous post was at 07:28 PM ----------
and sorry I don't have an SD Card

Vinnom said:
Here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v72696/f1/full/update.zip
Click to expand...
Click to collapse
thanks for the file but it won't work for me too..
the install process stops at 5% "Installing update" and reboots after a few minutes

can we extract all from the ota update zip and install via flash? can this work?

xCite86 said:
thanks for the file but it won't work for me too..
the install process stops at 5% "Installing update" and reboots after a few minutes
Click to expand...
Click to collapse
Hmmm, sorry, I thought it would help. In fact, the package is listed as a rollback to M, but it is for CAN-L11. The rollback for CAN-L01, I didn't find. As there isn't many differences between those models, I thought it would work
EDIT: now that I read the op again, I noticed that your model is CAN-L11. I wonder why it didn't work
Houamei said:
can we extract all from the ota update zip and install via flash? can this work?
Click to expand...
Click to collapse
No, it won't.
The reason behind this is because system partition get smaller (because nougat way of update) after updating it to emui 5. So the old system.img won't fit the new partition

My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.

Mikey94 said:
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Click to expand...
Click to collapse
So you downgraded?

Mikey94 said:
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Click to expand...
Click to collapse
did you downgrade your nougat successfully with the files above??
edit: i tried it without a connected usb cable and got "software install failed!" after short time

Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?

i think this should work if you or someone else share a backup i could try..

Michiel0912 said:
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
Click to expand...
Click to collapse
no, in my opinion the nougat bootloader want work with mm.
I would flash the firmeware of mm and after that flash twrp and restore the backup after that [emoji106]

It will work. There is a backup within twrp thread, from bluesmothie.

Vinnom said:
It will work. There is a backup within twrp thread, from bluesmothie.
Click to expand...
Click to collapse
found it...
https://forum.xda-developers.com/showpost.php?p=70259615&postcount=2
re-unlocked bootloader
flashed twrp with fastboot flash recovery twrp_huawei_generic_a53_YYYYMMDD.img
copied all the dropbox files to /external_sd/TWRP/BACKUPS/FPFDU16930014596/1970-03-18--16-40-58_CANC432B100/...
wipe all partitions except sd-card
recover the complete backup
so @Vinnom many thanks for your help. i got my phone back to life (after fomatted data partition) and got downgraded to CANC432B100 now.

Michiel0912 said:
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
Click to expand...
Click to collapse
Yeah, thanks Vinnom...

xCite86 said:
found it...
https://forum.xda-developers.com/showpost.php?p=70259615&postcount=2
re-unlocked bootloader
flashed twrp with fastboot flash recovery twrp_huawei_generic_a53_YYYYMMDD.img
copied all the dropbox files to /external_sd/TWRP/BACKUPS/FPFDU16930014596/1970-03-18--16-40-58_CANC432B100/...
wipe all partitions except sd-card
recover the complete backup
so @Vinnom many thanks for your help. i got my phone back to life (after fomatted data partition) and got downgraded to CANC432B100 now.
Click to expand...
Click to collapse
Did the same thing, but first TWRP didn't find the backup. So i did a small backup just of the boot partition, so that TWRP makes a new backupfolder "FPF4C16A07000014"". Now i renamed the " FPFDU16930014596" to the new "FPF4C16A07000014" and TWRP found the backup and i was able to restore :highfive::highfive:
Small Addition:
It was a freaking fight to get my bootloader unlocked again, cause i lost the unlock code.
The websites (english and asian) are freaking BS. Was not able to get to the page where you get the code, so i downloaded DC-Tool and payed 4 dollars for the damn code.
Now the code is saved in my owncloud, dropbox, google drive, on a sheet of paper and google notes. No way to lose it again
B100 firmware is much smoother than B320 but has a lack of comfort, like i'm missing the new quick settings with double pull down and the touch responsibility of slide bars (like the volume bars) is not very good in B100... But i won't upgrade to 320 again, because of the following points that make it a no go for daily driver:
- Camera is very slow and hangs up
- Video playback is very slow and buggy (no matter if it's in the galery or youtube, ect.)
- Fingerprint is too slow
- Whole system gets very slw if you dont clean up the app history
Will upgrade again when there is a new version out

please am having same issue here. tried restore but still not booting.
problem is cust. what do i do about it.
HELP ME

[UNOFFICIAL][ROM] LineageOS 14.1 for Galaxy Tab E [SM-T561/SM-T560]

Code:
[B][U]Disclaimer:[/U][/B]
I am not responsible for any damage to you your device. Everything you do, you do on your own risk!
Last year I got a Galaxy Tab E (SM-T560) from Samsung for free as gift to my new mobile phone.
Unfortunately the ROMs for SM-T560NU tabs are not working on that device, but I found a working ROM of LineageOS 14.1 (Android Nougat 7.1.2) on the following page:
How to install Android Nougat on the Galaxy Tab E (SM-T561)
Click to expand...
Click to collapse
Original source (Russian language)
Click to expand...
Click to collapse
LineageOS 14.1 (formerly known as CyanogenMod) ROM is based on the Android stock ROM released by Google, which the LineageOS team modifies.
Credits go to the LineageOS team for making this ROM available to many devices and to independent developers like Ma3a_XaTa for porting this ROM to the Tab E SM-T561.
Click to expand...
Click to collapse
Just installed it to my tab and it seems working well!
I used the instructions from a comment at the bottom of the page:
Downloads:
ROM: LineageOS 14.1
Gapps: The Open GApps Project
Boot Image: boot.img
SoftKeyFix: KeyFix
Recovery: TWRP Recovery for Tab E
Root: SuperSU
Click to expand...
Click to collapse
Prerequisites:
1. Make sure you have TWRP 3 installed (HowTo)
2. Move the downloaded files to your Micro SD Card (>4GB recommended)
3. >50% battery charge
4. Some patience.
Click to expand...
Click to collapse
Installation:
1. Boot to TWRP 3 (Power + Home + Volume Up) and Swipe to allow modifications
Note: Make sure to Backup EFS and Modem to Micro SD Card in TWRP.
2. Wipe > Advanced Wipe > (Select Dalvik Cache, System, Data, Internal Storage, Cache ONLY) > Swipe to WIPE
3. Install > Select Storage > Micro SD Card > Select lineage-14.1-20180419-UNOFFICIAL-gtel3g.zip
4. Add More Zips > open_gapps-arm-7.1-pico-2018xxxx.zip
5. Add More Zips > keys.zip
6. Swipe to confirm flash and wait for 5-10 mins
7. After the Flash process DO NOT restart system.
8. Go back to Install > Install Image > boot.img > Select Boot Partition > Swipe to confirm flash
9. After the boot.img has been flashed DO NOT restart system IF you want Root.
10. Go back to Install > Install Zip > SR3-SuperSU-v2.82-SR3-20170813133244.zip > Swipe to confirm flash
11. Now Restart System.
12. Wait 10-15 mins, it will take some time.
13. Enjoy Lineage OS!
Click to expand...
Click to collapse
Known bugs:
- Charging while the device is off works, but does not show battery charge indicator animation.
Click to expand...
Click to collapse
Good luck and enjoy!
Code:
[B][U]Miscellaneous:[/U][/B]
[URL="https://www.hardreset.info/devices/samsung/samsung-t560-galaxy-tab-e-96-wifi/download-mode/"]HowTo bring the Tab to DownloadMode[/URL]

Hints & Tips:
1. To improve the speed of the tablet, turn of animations inside Developer Options.
2. You can also install an app freezer called "Icebox" to temporarily disable RAM hungry apps like Facebook, Chrome etc.
3. To ensure longer battery life, disable “double tap to wake” hidden somewhere in the settings (use the app called "Kernel Adiutor" from the Playstore).
4. If you don’t plan to put a SIM on this thing or if you are having a SM-T560 only, put it in airplane mode and then turn on your WiFI when needed. Turn of GPS/location or even sync when not necessary.
5. Disable "Adaptive Display" in the settings. It seems to make the tablet slower.
6. Improve the battery life of the tab by using an app called “L Speed“ (available in Playstore).

Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?

mimuta said:
Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?
Click to expand...
Click to collapse
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See

SeeDoubleYous said:
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See
Click to expand...
Click to collapse
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??

V3rdeV1ntage said:
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??
Click to expand...
Click to collapse
What version of TWRP are you using & what error do you get?

Have someone passed safetynet check ? Can you help me with pass?

The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess

Problems of ignition and charge of battery
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you

Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?

s5minimalist said:
The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess
Click to expand...
Click to collapse
I have my T560 all the time in airplane mode with Wifi on. Battery drain is no problem at all.
It is also written in my second post:
HTML:
https://forum.xda-developers.com/showpost.php?p=78977223&postcount=2
aribetty said:
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you
Click to expand...
Click to collapse
I had a similar problem in the beginning. Seemed as the tab was in a bootlooporsomething similar with black screen.
The only solution I found was to wait some days until the battery was empty, charge the tab and directly started to download/recovery mode and flash it again.
Now it is working fine with this ROM.
Rittachi said:
Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?
Click to expand...
Click to collapse
I am using it now for ~2.5 months and I am quite happy with it.
It is much better then the stock ROM.

Hi @SeeDoubleYous and guys. I was reading the Forum and decided to share with you my experience with this ROM. Well, I'm owner of a SM-T560 (in US and Canada this model is T560NU I don't know why it's different just in these two countries ). Anyway....
I made all the steps described on the step-by-step Instructions. (TWRP Recovery via ODIN, Root, ROM, GAPPS, etc etc etc).
I'll be honest with you. My t560 turned in a piece of sh... Very Slow, Apps Stucking all the time, sometimes bootlooping too... i used the Tab for almost 3 weeks. After that I decided to reset the device and I did all steps again using the same ROM (I reinstalled the TWRP RECOV via ODIN, proceeded a Factory + Internal Memory Wipe, Installed the LINEAGE 14.1 OS, etc, etc, etc) But this time I choose the "Micro" GAPPS option instead "PICO". Installed Root SU, etc, etc exactly as the directions wrote in the top page.
For my surprise, It's perfect Now!!!! ROM is great.... No problems of RAM, Bootlooping, Stucking, APP crashing... Absolutelly Nothing!
I don't know why, but it seems that the secret is install for first time and use for some weeks even its is not working fine. And After that, proceed All the step-by-step again from the very beggining. (Reinstall TWRP, ROM, GAPPS, Keys, "Boot Image" and ROOT SU). It will work fine on SM-T560 just from the second Install on.....
All Best guys

I need help. My screen is stuck on boot again
Am I bricked?

Hi guys, I've got a T560 tablet with the official ROM and I'm researching to upgrade it's software.
Currently I'm away off-shore for work but as soon as I get home I'll try this ROM.
I've been a fan of CyanogenMod since the early days and I'm eager to try it so I can bring some new life into my old tablet.
Since this ROM is for the SIM card variant T561 I was searching for a way to disable the Radio altogether and I found this:
https://android.stackexchange.com/q...le-radio-signal-in-a-phone-without-a-sim-card
Basically it disables the RIL with a simple Terminal Command:
Code:
su -c "setprop persist.radio.noril 1"
Can someone try this and see if its working properly? (OFC after a Back-up is done) Its persistent through reboots so you don't need to use Airplane Mode anymore and maybe it will help with the battery draining problem.
Also one question for the guys who are currently using this ROM:
Is Magisk working? After everything is set-up can we uninstall SuperSU and install Magisk for root?
Thank you,
Have a nice day!

SpawNyK said:
Code:
su -c "setprop persist.radio.noril 1"
Click to expand...
Click to collapse
I've tried the command and it worked, no reboots even if the airplane mode is off and no problem so far.
I don't know if the battery life is better now because I've just done it.
For the other question, I haven't tried because I like SuperSu, but I think there's no problem.

gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
Can you please provide a guide for flashing this?
Like which GApps version should I use, etc...

I get in red, does something affect ROM? e: unknown command [log]

Hey,
does this rom works with SM-T562??? (3G)

Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).

gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
gucio1976 said:
I found it here .
https://www.youtube.com/watch?v=-4h_3qDRiv8
Click to expand...
Click to collapse
Why should you use the old version, if this thread offers a newer one?
gucio1976 said:
---------- Post added at 11:33 ---------- Previous post was at 11:13 ----------
Something else. Maybe it will be useful to someone.
https://www.youtube.com/watch?v=7JpUomQs2ok
Click to expand...
Click to collapse
I think that's the same version as offered here...
shreejalm said:
Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).
Click to expand...
Click to collapse
I did not find any new version. The ones available are only working with the SM-T560NU....
Sorry!

TWRP (Ianmacd) Images, New Space.

This is NOT my work (Ianmacd) and guide is written by Mr Pickles all credits to him for his install method.
Also this is just a copy and paste but the guide is well written and TWRP should cause less issues.
I'm sure Gieti94 is just perhaps busy with other commitments, credit also to him for his fantastic efforts.
Just a new space for the currently working TWRP so all don't get in a pickle.
----------------------------
Download Maintained By Pickles (best all in one convenient place) will have everything necessary for twrp functionality. Credit to pickles.....:good:
http://bit.ly/2VlcqYd
Excellent installation Guide below
Install Guide
---------------------------
- NOT A SINGLE STEP IS UNNESSECARY
- DO THEM _ALL_ EXACTLY!
- ALL YOUR DATA WILL BE GONE - BACKUP!
---------------------------------------
DO NOT INSTALL MODPACK FROM SOLDIER - IT BREAKS TWRP!
---------------------------------------
If you have any problems - contact @PiCkLeS or on Telegram by PiCkLeS or @rp4k
---------------------------------------
All development is by @ianmacd (Ian Macdonald).
---------------------------------------
0 - No matter what you have today, no root or Magisk-only solution or TWRP with Magisk-solution, do ALL the steps..
1 - Make sure you copy the "Magisk_Manager_Ian_install.apk" file and "Multidisabler-g97x_by_Ian.zip" file to your sd-card before you start!
2 - Download latest firmware via Samfirm or Frija or in any way you can, and unpack.
3 - Boot your phone to Download mode (Power+Bixby+VolDown) and remember to have the USB connected to your computer, it won't boot to DL-mode otherwise
4 - Keep autoboot etc in Odin settings, put each file in its place (AP, BL, CSC etc) and _dont_ use HOME_CSC, use CSC-only-file.
5 - After Odin is done, your phone will reboot automatically - let it! It can feel like forever, but let it do its restarts and stuff until you are in system-setup
6 - Do the setup as per usual, CONNECT TO WIFI but you can safely just say Skip on sign in and other stuff
7 - When setup says its all finished and you get to the standard launcher - go into Settings and enable Developer settings
8 - This step IS necessary.. If you don't do this step, you might get in pre-normal rrm state and you will have wait 7 days to try again: Enter Developer settings and look for the "OEM Unlock" switch - if you are rooting for the first time, Enable it. If you already have root since before or unlocked your bootloiader before, just confirm that its Enabled and graded out.
9 - If you already have an unlocked bootloader, skip to step 12. If not, continue with step 10.
10 - IF you never have unlocked your bootloader before, Power off the phone and boot into download mode again. You will see the long press volUp option for unlock bl, do that.
11 - IF you never have unlocked OEM before, boot the phone again, do the setup without signing in etc but connect to wifi, enable dev settings, go into dev settings and check that OEM now is enabled and grayed out.
12 - Reboot the phone in recovery mode (Power+Bixby+VolUp and keep holding until you are in stock recovery. Choose and do a factory reset.
13 - Reboot to bootloader with option in Recovery.
14 - Flash the tar you got (S10x-TWRP+Magisk_fixed_by_Ian.tar I Odin in the AP-slot. DISABLE auto reboot in Odin first!
15 - When the tar has flashed - Do as instructed on the phone, hold Power+VolDown for a few seconds and AS SOON AS THE SCREEN GOES BLACK -> quickly press power+bixby+volUp for a _long_ time, and I mean it can feel as if its a full minute! After a while you will see TWRP starting with its start screen, you can now let go and enter TWRP.
16 - FORMAT data, then WIPE data AND Cache. DO NOT LET IT REBOOT
17 - Flash "Multidisabler-g97x_by_Ian.zip" from SD card
18 - Go back to start screen of TWRP, Choose Reboot, Choose Recovery - YOU MUST ALWAYS CHOOSE REBOOT TO RECOVERY and _NOT_ system!
19 - Let the phone reboot into system, it will do some reboots it self, and again it will feel like it takes FOREVER - Just let it do its thing and DO NOT PRESS ANY KEYS!
20 - When your phone is finally done booting, just do the normal setup/signing for real this time.
21 - When you are done and in system/launcher, install "Magisk_Manager_Ian_install.apk" from SD card and verify that you now have Magisk Manager installed.
22 - Start Magisk Manager and say YES to what it says, it will do some stuff and then say "Rebooting in 5 seconds" - LET IT BOOT AND DO NOT TOUCH ANY KEYS this time either..
23 - Now when booted to system, start Magisk Manager and see that you have all green and its installed.
24 - Now you have root.
** Every time you reboot manually, be prepared to hold Power+Bixby+VolUP until you see the Samsung S10x-logo, then release and let it reboot, you will have root.
** Every time you power off the phone, when you power ON again, hold Power+Bixby+VolUP until you see the Samsung S10x-logo, then release and it will boot with root.
** Every time you want to enter TWRP-recovery, do as above but KEEP HOLDING THE KEYS UNTIL TWRP-start screen shows then release. Remember to choose reboot to recovery afterwards and you will boot with root.
** IF you screw up and forget or miss the key combo, just let it boot to system, immediately when system is up - reboot again and do the key combo and all is fine again.
This is me just trying to get an emergency first aid space, nothing more, I'm NOT trying to take any credits or dismiss Gieti94.
Thanks All

Duncan1982 said:
This is NOT my work (Ianmacd) and guide is written by rp4k all credits to him for his install method.
Click to expand...
Click to collapse
This is my tutorial and not r4pk. And I'd prefer that you use the download I provide here and no where else to make sure the right files gets downloaded when updated.
http://bit.ly/2VlcqYd
/P

Yea I can keep the OP updated, this is just an emergency first aid thread, thanks to Pickles for his well written guide.
I'm really not wanting to offend anyone, just for all to make life a bit easier....

very nice to have a reliable twrp solution, pitty that we don't have too many things to flash in recovery

Please remove the alternate download link, I have updated the multidisabler zip with a important update, v1.1 and the one download link for all is just for things like that, the other download link still have the old zip.
Very important that everyone uses Ian Macdonald's new v1.1 multidisabler script.
/P

I can update the mega link with the new disabler I reposted it to mega because I can't access Google @PiCkLeS
And yes I never said I wrote the guide I just added myself for helping people

rp4k said:
I can update the mega link with the new disabler I reposted it to mega because I can't access Google @PiCkLeS
Click to expand...
Click to collapse
I understand. But that doesn't seem to be a big problem for any one else and the bigger problem is that you risk having a link that is being used by the people only see it here and don't read anywhere else, or this message, and end up with old information or even worse, outdated files.
I can help you get the files on PM but please remove these links outside of my drive, which I maintain every day and keep up to date. It's not for vanity, it's for safety.
For now please edit your text and remove the link. All must use v1.1 of the multidisabler zip by Ian.
/P

Maybe this thread was a bad idea, as stated I am around and willing to keep things up to date
I know the importance, and how things are at present.

Duncan1982 said:
Maybe this thread was a bad idea, as stated I am around and willing to keep things up to date
I know the importance, and how things are at present.
Click to expand...
Click to collapse
Listen, just to be clear. I and I dont think Ian have a problem with you having this thread.
All I am worried about is the download link. Things can and are happening fast. If there are multiple sources for downloading files in this case, and today one was updated with important improvements, and there are many places to download from people can miss that and download old files that can cause big problems.
Keep the downloading to one good source and everything will be fine. The thread in it self can do much good by showing that there is an alternative, it works and right now almost 100 people in 24 hours have used it. Fantastic!
So I dont think it was a bad idea, I just dont want PM:s from people in a week or two asking why their device suddenly lost data, only to find out that they downloaded from a source that didnt have the latest files.
Thats all.
//P

PiCkLeS said:
Listen, just to be clear. I and I dont think Ian have a problem with you having this thread.
All I am worried about is the download link. Things can and are happening fast. If there are multiple sources for downloading files in this case, and today one was updated with important improvements, and there are many places to download from people can miss that and download old files that can cause big problems.
Keep the downloading to one good source and everything will be fine. The thread in it self can do much good by showing that there is an alternative, it works and right now almost 100 people in 24 hours have used it. Fantastic!
So I dont think it was a bad idea, I just dont want PM:s from people in a week or two asking why their device suddenly lost data, only to find out that they downloaded from a source that didnt have the latest files.
Thats all.
//P
Click to expand...
Click to collapse
I fully appreciate and understand that, the reason I created as I have plenty of time to maintain, and will keep it up to date I have been around for quite some time, if you look at my posts (search) I have had almost every device you can think of, currently have the Vivo IQOO also, I have enough experience to understand the important and implications.
I don't want your PM's to be going crazy so I'll fully respect your decisions and will keep everything updated also. But it is better if everything is tody and not one thing here and there, OP has been updated with your direct link, is this cool?
Just thought by creating this thread that it might help, my sincere and good intentions are hopefully evident

PiCkLeS said:
Please remove the alternate download link, I have updated the multidisabler zip with a important update, v1.1 and the one download link for all is just for things like that, the other download link still have the old zip.
Very important that everyone uses Ian Macdonald's new v1.1 multidisabler script.
/P
Click to expand...
Click to collapse
Can I install multi Disabler 1.1 withouth lost data?

zubi182 said:
Can I install multi Disabler 1.1 withouth lost data?
Click to expand...
Click to collapse
Yes just flash it in twrp, nothing will be lost.
/P

I assume this is only for the Exynos version? Or does it work for Snapdragon as well?

mistermidas said:
I assume this is only for the Exynos version? Or does it work for Snapdragon as well?
Click to expand...
Click to collapse
You have a working snapdragon root? How did you get past step #9 of launching stock recovery after you flashed magisk

rp4k said:
You have a working snapdragon root? How did you get past step #9 of launching stock recovery after you flashed magisk
Click to expand...
Click to collapse
Man... did you even read my comment???
I was asking if this would work for Snapdragon, not saying I got it to work. It doesn't mention if it's a method for both versions in the OP or not.

mistermidas said:
Man... did you even read my comment???
I was asking if this would work for Snapdragon, not saying I got it to work. It doesn't mention if it's a method for both versions in the OP or not.
Click to expand...
Click to collapse
Sorry I responded when I was half asleep. My fault.

I will try this out and post and update, i had no luck with previous twrp, always boot loops regardless of what i do.
My bootloader is unlocked but not grayed out. Can i still do it?

mercifool said:
I will try this out and post and update, i had no luck with previous twrp, always boot loops regardless of what i do.
My bootloader is unlocked but not grayed out. Can i still do it?
Click to expand...
Click to collapse
Yes, just do exactly all the steps and use the new files in the link and you will be fine.
//P

deleted

Carotix said:
hi ,
do you have the OEM switched to on?
if not , you need it ..... if you can't get it because you are waiting the 7 days , you can make this trick
open settings and set the date 8 days before ... then reboot
so you can enable OEM in developer settings
Click to expand...
Click to collapse
Hi there, are these instructions for Exynos only or can I apply it to Snapdragon as well, please advise. Thank!