Develop Bugs

[Q] installing custom roms

hi...
can any1 tell me how to install custom roms using pc...........
i have searched the forum....but couldnt find any answer.................
sorry for starting a new thread........
thanks in advance

General Method:
- find, download and copy a flashable rom called "fullwipe 1.3" to the sd
- copy the zip with the rom you want to load in it to your sd card
- reboot into cwm recovery
- install zip from sd card
- choose the fullwipe 1.3 zip
- install
- then choose the rom's zip
- install
- reboot
wait for it to load. there you go.
For more advanced rom's, you must make directory's on your sd card for them to work properly. Follow instructions posted by the Rom's developer for proper installation.

thanks bro..........4 all ur help..............
1 more question........
what about using it through the fone......
i mean .....after downloading through the rom manager..........should i follow the same procedure ????

question
I rooted today, s-off & eng-off, installed rom manager
what do i have to do to get clockwork to work
I try booting into recovery but, display goes blank & has a red triangle symbol & after many minutes nothing happens..... can some inform me of the step I may have missed or something i can do to verify that i have the device set up properly.
Hopefully Thanks in advance.

gixer131 said:
question
I rooted today, s-off & eng-off, installed rom manager
what do i have to do to get clockwork to work
I try booting into recovery but, display goes blank & has a red triangle symbol & after many minutes nothing happens..... can some inform me of the step I may have missed or something i can do to verify that i have the device set up properly.
Hopefully Thanks in advance.
Click to expand...
Click to collapse
Flash CWM recovery from rom manager again.

Hawks556 said:
Flash CWM recovery from rom manager again.
Click to expand...
Click to collapse
I can appreciate that, but I need to know what to do. I try to do that & i get an error while attempting to run privileged commands. Flashing sounds all great but I cant seem to get it to do anything in recovery... error issues trying to do that, or anything else, I also have super user update issues that say they put a recovery image on the sd card & to go boot that from within recovery.
Just hoping to find out why i cant do the simple things everyone speaks of.

gixer131 said:
I can appreciate that, but I need to know what to do. I try to do that & i get an error while attempting to run privileged commands. Flashing sounds all great but I cant seem to get it to do anything in recovery... error issues trying to do that, or anything else, I also have super user update issues that say they put a recovery image on the sd card & to go boot that from within recovery.
Just hoping to find out why i cant do the simple things everyone speaks of.
Click to expand...
Click to collapse
Well if you can't flash recovery from Rom Manager then there's something wrong with your root privileges or s-offs... Just to make things clear, how did you try to flash the recovery?

AT THE TOP OF THE BOOTLOADER IT MUST SAY "... ENG S-OFF RL" FOR THIS TO WORK
With the device connected, boot into bootloader and select FASTBOOT and press power once.
It will now show FASTBOOT USB, and give you 4 options.
Download the newest 4.x.x.x version of the cwm recovery from the dev section.
Download My Toolkit and Extract to C:\
In the recovery zip that you downloaded from the dev thread, find the "recovery.img" and extract it to the RESOURCE folder of my toolkit. (make sure its only the recovery.img and not the folders it sits in)
open up a command prompt (windows key + R, type "cmd" and hit enter)
type in: cd "C:\HTC ACE TOOLKIT\RESOURCE" and hit enter.
the prompt should now be in that directory.
now type in the following EXACTLY and press enter afterwards:
fastboot flash recovery recovery.img
Let it flash, and badaboom, you have just flash cwm recovery.

JSLEnterprises said:
AT THE TOP OF THE BOOTLOADER IT MUST SAY "... ENG S-OFF RL" FOR THIS TO WORK
With the device connected, boot into bootloader and select FASTBOOT and press power once.
It will now show FASTBOOT USB, and give you 4 options.
Download the newest 4.x.x.x version of the cwm recovery from the dev section.
Download My Toolkit and Extract to C:\
In the recovery zip that you downloaded from the dev thread, find the "recovery.img" and extract it to the RESOURCE folder of my toolkit. (make sure its only the recovery.img and not the folders it sits in)
open up a command prompt (windows key + R, type "cmd" and hit enter)
type in: cd "C:\HTC ACE TOOLKIT\RESOURCE" and hit enter.
the prompt should now be in that directory.
now type in the following EXACTLY and press enter afterwards:
fastboot flash recovery recovery.img
Let it flash, and badaboom, you have just flash cwm recovery.
Click to expand...
Click to collapse
The BOOTLOADER SAYs "... ENG S-OFF but no RL @ the end
Can someone instruct me to what I may have done wrong? I know if I try to s-off or ENG-off I now get a connection problem but the first time I tried it seemed to work properly.
Thanks

Thanks for the help, I have successfuly flached clockwork now & a new rom.... What should I do to update a radio for my device on telus? Thanks

gixer131 said:
Thanks for the help, I have successfuly flached clockwork now & a new rom.... What should I do to update a radio for my device on telus? Thanks
Click to expand...
Click to collapse
well, in that toolkit i told you to download is a command script that does pretty much what I told you do to for the recovery.
Since you and I have the exact same phone I recommend grabbing the radio from the 2.52 korean build (Radio_12.59.60.26U_26.11.04.21_M), and the rill's as well.
Here is the radio and ril (first 2 links, download via the dropbox links): http://forum.xda-developers.com/showthread.php?t=996630
make sure you're in bootloader > fastboot and it says FASTBOOT USB on the screen
take a radio.img from within the zip and drop it into the resource folder and then run the shorcut in the toolkit.
It will now flash the radio to your phone and reboot.
Now with the rill's you flash via cwm recovery, from the RIL zip you downloaded, off your sd card in the same way you would flash a rom.

JSLEnterprises said:
well, in that toolkit i told you to download is a command script that does pretty much what I told you do to for the recovery.
Since you and I have the exact same phone I recommend grabbing the radio from the 2.52 korean build (Radio_12.59.60.26U_26.11.04.21_M), and the rill's as well.
Here is the radio and ril (first 2 links, download via the dropbox links): http://forum.xda-developers.com/showthread.php?t=996630
make sure you're in bootloader > fastboot and it says FASTBOOT USB on the screen
take a radio.img from within the zip and drop it into the resource folder and then run the shorcut in the toolkit.
It will now flash the radio to your phone and reboot.
Now with the rill's you flash via cwm recovery, from the RIL zip you downloaded, off your sd card in the same way you would flash a rom.
Click to expand...
Click to collapse
I would Like to thank you for your help & support, I was a the step of having fastboot usb And on my pc I unziped the radio And droped the image in the resource folder, a window pops up (disk burner) only option to choose is DVD R Drive.... do I have to have the SD card unmouted as a disk drive to the computer?

leave disk burner outta this. lol
The phone should be in bootloader under "fastboot" so the highlighted area will say FASTBOOT USB (since your phone is connected to your pc).
If radio.img is in the RESOURCE folder of my toolkit, go back to the main folder (HTC ACE TOOLKIT) and just double click the "Flash Radio" shorcut.

JSLEnterprises said:
leave disk burner outta this. lol
The phone should be in bootloader under "fastboot" so the highlighted area will say FASTBOOT USB (since your phone is connected to your pc).
If radio.img is in the RESOURCE folder of my toolkit, go back to the main folder (HTC ACE TOOLKIT) and just double click the "Flash Radio" shorcut.
Click to expand...
Click to collapse
Most excellent! Thanks & Thank you, your help has been most usefull & is quite appreciated!

Changed Rom
Changed rom last night & wanted to know weather I should flash the "rill's" & "radio" each time I change roms. I just did the radio now so hope that cures the tinny sound, also it sounded kinda tinny just playing music, is there a patch or something else to do or is all that fixed in the radio?
Any suggestion on roms to try? using Revolution HD right now.

[Q] Help! Can't go into recovery mode with Desire Z hboot‏ (G2)

I have a Tmobile G2 rooted running Gingervillian (gingerbread 2.3.1) and I tried to install the Desire z hboot to get the Sense ui.
I followed the steps here, "http://www.youtube.com/watch?v=ogZfSWLlvPg"
HERES THE PROCEDURE OF WHAT I DID:
After updating the PC10IMG.zip (Desire Z hboot) folder to the root of my G2, I was stuck on the HTC logo screen after updating. So I followed what the guy said in the video, deleted the PC10IMG file in my SD card then rebooted my phone.
After rebooting my phone, I was booted back same rom. So I flash/recovery my phone through Rom Manager and tried rebooting my phone to clockwork mod recovery mode.
After rebooting, I didn't go to Clockwork Mod but to FASTBOOT screen? I select "bootloader" and it goes to a quick load that says something like "SD loading, no image or wrong image". I select "Recovery" then it goes to the HTC logo for a split second then I'm back to FASTBOOT screen again.
This is the info on the fasboot screen? don't know if that'll help:
Vision pvt eng S-off
Hboot-0.84.2000 (pc1010000)
Microp-0425
Radio-26.02.15_m2
eMMC-boot
Sep 8 2010, 15:65:38
So now, I don't know what to do and my questions are:
1.) Is there a way to go back to the G2 hboot?
2. Can I still fix this and procedure on and install new roms on recovery clockwork mode, using Desire Z hboot? (as the video did)
Please help a brother out I'm still a noob and still learning. If this is in the wrong place, please move it to the correct place.

Anyone? if it seems confusing, please ask questions or if I need to provide more information. I really need help with this. Any suggestions will help.

Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc

tarroyo said:
Zedomax's guide are outdated, he never updated them when new methods surfaced.
Try a downgrade
http://www.youtube.com/watch?v=VdWt65tUBVc
Click to expand...
Click to collapse
would any PP99IMG.zip file work? And do I basically put it in the SD's root and put it into the boot menu to update the file?
Thanks

by the way, is this compatible with G2s?

don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...

hoffmas said:
don´t put the pp99img.zip on your sd !
do something different:
download a recovery.img (3.0.2.4 for vision):
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
be sure to remove any pc10img.zip or so from your sdcard. then put your phone in fastboot mode (power & tp-wake) connect it to pc and flash the recovery through fastboot by typing: fastboot flash recovery recovery.img
after that you should be able to enter recovery. be sure to wipe before installing a new rom...
Click to expand...
Click to collapse
I'm assuming I need to do ADB? If so, Is there a way for Mac ios

prototype2 said:
I'm assuming I need to do ADB? If so, Is there a way for Mac ios
Click to expand...
Click to collapse
Yes, you can run adb on a Mac. See the link to my adb guide in my signature (assuming you're not viewing from the XDA app, which doesn't show the full sig).
Sent from my Desire Z running CM7.

Okay, just to make it clear (I am a "step by step" guy when it comes to technical computer/phone stuff.), from my understanding:
1. Download the recovery.img (3.0.2.4 for vision) and put it in the root of my SD card.
2. Delete any pc10img.zip files from SD card.
3. Turn phone off and then turn phone onto FASTBOOT mode by holding power/volume down/camera or power and tp-wake? (Btw what's tp-wake? and during this process, is the phone in fastboot screen mode while I'm about to type the "flashboot flash recovery recovery.img"?
4. Connect to computer, open up terminal (Mac) and do the ADB process and type in "fastboot flash recovery recovery.img"
5. Wipe clean and install new rom in recovery mode? (Clockwork Mod recovery mode?)
PLEASE correct my steps or add in any steps that I'm missing. I bought my phone rooted so I never went through these steps before. Anyways please correct me, I don't want to ruin my phone anymore than it is already.

anyone can review my steps?

good morning
ad step 1: don´t put it onto your sd; put it into the adb tool folder on your pc !
ad step 3: tp-wake = the square button at the bottom of your phone (the one that acts like a mouse); to enter fastboot mode press power & tp-wake
...the phone should be in fastboot mode while typing the command.
before you type "fastboot flash recovery recovery.img" type "fastboot devices" and look if your phone shows up... if so go ahead with flashig the recovery (by the way, you may have to rename the recovery file)
step 4 and 5 look fine...
good luck

okay, I will try it in a little bit here.

In FASTBOOT USB mode, it wont recognize my device but when my device is fully on, adb works.
I get when I type "flashboot devices" (while the phone is on FASTBOOT) in terminal and get:
"-bash: fastboot: command not found"
By the way, I renamed the downloaded flash to "recovery.img" and put that file in the "platform-tools". Don't know if that'll work.

The "fastboot" command should be on your PC in the same folder as the "adb" command. Where did you get adb from, did you install the SDK and platform tools, or something cut-down ?
Sent from my Desire Z running CM7.

hm... that means that you do not have fastboot installed. maybe google for fastboot on mac, because i have a linux system... so i can´t help you in that point.
other thing you could do is following this guide (it´s a pc10img.zip with dz hboot and clockwork recovery):
http://www.virtuousrom.com/2011/06/t-mobile-g2-users-migrating-to-desirez.html
but first i would try the fastboot method - it´s safer.

Okay, I got the fastboot devices to read my phone. But it cannot load my recovery.img?
This is what got when I typed in "fastboot flash recovery recovery.img" :
error: cannot load 'recovery.img'

rename it to recovery and try again...

It's not loading the img file for some reason..

prototype2 said:
It's not loading the img file for some reason..
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...

hoffmas said:
http://wiki.cyanogenmod.com/wiki/Fastboot
or use the virtuous link...
Click to expand...
Click to collapse
that link isn't working

[Q] Power button respond prob and Hboot prob

My phones stucked on Fastboot and it doesnt let me to go(select) recovery or anything.It only read PD99IMG.zip files and hardware keys only work to select yes or no(update or not).I was on CWM recovey and i flashed CWM img.But still phones doesnt let me to get into recovery! Still can reads PD99IMG.zip and only doing that. What should i do?I also tried RUU.exe.But it tell me to connect phone via usb even it still connected.
TIA
P.S.
Flashed CWM recovery image through Android Flasher and able to get into recovery! So i restored previous backed up CM.Everything perfect except these things.Now POWER BUTTON DOESNT RESPOND CORRECTLY and STILL CAN'T GET IN TO RECOVERY BY HOLDING VOLUME DOWN+POWER BUTTON. But ROM Manager CAN get in to recovery! What is now?
1st power button didn't work.Then i gave a factory reset. Nothing changed.After few hours,power button begun to respond, but not correctly. I mean,when i press on power button,screen doesn't off. But when i long press on power button and after few seconds,phone respond(show the power button long press menu).Also i can select Power off,reboot etc..This seems a software problem.What shold i do?
Ah.Another thing,I think i have Stock Hboot.Should i flash CM Hboot because i have a CM rom?
TIA

crazykas said:
My phones stucked on Fastboot and it doesnt let me to go(select) recovery or anything.It only read PD99IMG.zip files and hardware keys only work to select yes or no(update or not).I was on CWM recovey and i flashed CWM img.But still phones doesnt let me to get into recovery! Still can reads PD99IMG.zip and only doing that. What should i do?I also tried RUU.exe.But it tell me to connect phone via usb even it still connected.
TIA
Click to expand...
Click to collapse
look at my guide

bortak said:
look at my guide
Click to expand...
Click to collapse
Thank you very much sir!I already read your guide. This is the part i want.
" [2] ADVANCED BOOT PROBLEMS
S-OFF
"I'm S-OFF, I can't boot recovery and my phone doesn't
boot"
For one reason or another, your recovery image is corrupted
and when you try to boot into recovery, all you get is the
HTC screen and your phone doesn't boot. It is relatively
simple to fix, and there is more than one way to go about
doing this. All you need to do, is to flash a new recovery
image.
Possible causes
- I have no idea, however if somebody has an explanation
then feel free to PM me.
Repairing recovery, booting phone:
NOTE: If you have a PVT4 Device, go to "Flashing custom
recovery". If you are unsure, check just to be safe.
#METHOD 1#
Method One uses Android Flasher to flash the recovery
image.
[STEP1] - Battery pull. Hold the BACK button and the
POWER button to boot into FASTBOOT mode.
[STEP2] - Download Android Flasher
[STEP3] - Download the recovery image . Put it in a place you
can remember.
[STEP4] - Run android flasher, tick "Recovery", and press
"Begin"
[STEP5] - Browse to where you downloaded the recovery
image, select it, and press "open"
[STEP6] - repeat [1] from [STEP4] onwards
#METHOD 2#
Method two uses cmd and requires Android SDK to be set
up.
[STEP1] - Battery pull. Hold the BACK button and the
POWER button to boot into FASTBOOT mode.
[STEP2] - Download the recovery image . Rename it to
"recovery.img" for simplicity, and place it in the following
directory:
Code:
C:\
[STEP3] - then in cmd type the following commands
Code:
cd c:\android-sdk\tools
fastboot flash recovery c:\recovery.img
fastboot oem gencheckpt (this command boots you into recovery, ignore the feedback from
[STEP4] - repeat [1] from [STEP4] onwards"
Im trying with AndroidFlasher .Problem is link to recovery.img is not working.Can you tell me the full name of recovery i should google and download?
TIA

download ClockWorkMod recovery for bravo then you can flash any custom rom... 4ext is highly recommended but you should download it via app (download from here)
Is it really necessary to open another thread about your problem?

kotag82 said:
download ClockWorkMod recovery for bravo then you can flash any custom rom... 4ext is highly recommended but you should download it via app (download from here)
Is it really necessary to open another thread about your problem?
Click to expand...
Click to collapse
If link is down then use any other recovery from the recoveries section.

[SOLVED] plz help

how r u doing guys,
after unlocking on htcdev, I 1st used the EASIEST ROOT METHOD - 'RECOVERY + SUPERSU' provided by PAUL but found that i couldnt boot into recovery, then i used the alternate method, after that my phone keeps restarting!
what to do now?

Flash cwm 5.4.0 through fastboot..
Download any custom rom of your choice.. put it in sd.. flash zip through cwm..
Reboot in bootloader..
Erase cache in fastboot and flash boot.img of the custom rom..
Make sure you wipe data/cache in cwm recovery..
There are so many guides.. take help for the commands..
Good luck
Sent from my HTC One X using Tapatalk

i flashed the latest recovery image provided by paulobrien.. and then tried to reboot in recovery but it didnt work.. it just goes to the white HTC boot image..
what if i went through the whole thing.. without activating the USB DEBUGGING option?
i really dont remember activating it
do u think i bricked it?
im trying also to factory reset from bootloader but still nothing happens
i donno .. ill try flashing the version 5.5.0.4 but i dont think it will work
any other suggestions guys?
thank you

Loushi said:
i flashed the latest recovery image provided by paulobrien.. and then tried to reboot in recovery but it didnt work.. it just goes to the white HTC boot image..
what if i went through the whole thing.. without activating the USB DEBUGGING option?
i really dont remember activating it
do u think i bricked it?
im trying also to factory reset from bootloader but still nothing happens
i donno .. ill try flashing the version 5.5.0.4 but i dont think it will work
any other suggestions guys?
thank you
Click to expand...
Click to collapse
Download clockworkmod touch > http://db.tt/VF9J2eo8
Install android SDK on your pc (to default installation path)
Put phone into fastboot USB
Place cwm.IMG inside your android SDK folder that contains adb (c:/Androis-SDK/platform-tools)
Open command prompt on PC
CD c:/Android-SDK/platform-tools
fastboot flash recovery cwm.img
Done
To install a ROM, download the zip files on your PC,
Enter CWM recovery on your phone
Mount USB storage (whilst plugged into PC of course)
drag ROM zip files to phone
unmount USB storage
install zip from sdcard
Done
*charge your phone, don't flash anything with less than 50% battery.
Sent from my Nexus 7 using Tapatalk 2

I killed my watch

1 week ago i bought in china the watch .i dont know Chinese and i was just there for business so i thought that when i will connect to my phone it will automatically change to English but that never happend . So i tried several threads in xda to understand how it is working and what can i do . And i followed the thread that says to flash another system img recovery and boot . So i first unlocked the bootloader and booted on it and i flash the images and tried to reboot to recovery but already the recovey option in the bootloader is missing i get only shutdown , reboot , reboot bootloader , so i thought that i haven't correct flash the recovery.img so i flash it again but still the same . I also tried twrp recoveries and other recoveries that i found in other threads but still the same i can only boot to bootloader and nothing else . Has any one had the same problem and fixed it ? And if not were can i find the stock chinese firmware to try to flash it maybe it will come back to life .. thanks in advance

Have you tried using adb and fastboot commands?
Ex::
adb reboot-bootloader (for bootloader)
adb push xxxxxxx.img or xxxxxxx.zip /sdcard/ (for transfer files to sdcard)
adb push recovery.img /sdcard/ (for transfer yours custom recovery - i recommend the latest 3.1.1.0 because the others have some bugs)
after that boot to recovery: fastboot boot recovery.img (personally i never tried to flash the recovery but just boot it, baut it works)
from recovery just install the files that you have transferred earlier to sdcard (oh, and prior that erase everything except internal memory, or that toot but you have to transfer your files again)
ex: install zip (i recommend negalite) after that install kernel (negalite too) and install performance or battery booster .
Oh, after kernel install, it will automatically reboot, so you have to repeat the process to install the booster.
Reboot.
p.s. - the reboot process take LOOONG, so wait patiently.
Hope i could help you.

Currently my watch is stuck on AW boot logo from Skin Sturgeon kernel, how can I boot back to stock to reflash? Am unable to access adb as it doesn't seem to get that far in the boot process.

Enter bootloader
spicerackk said:
Currently my watch is stuck on AW boot logo from Skin Sturgeon kernel, how can I boot back to stock to reflash? Am unable to access adb as it doesn't seem to get that far in the boot process.
Click to expand...
Click to collapse
If you want to enter the bootloader, to choose, where u want to reboot and you are stuck:
Hold the button on your watch...hold it, till you feel the first vibration after the restart at the HUAWEI-Logo. Then, press the button once again (Its just timing).
It should show you your bootloader and you can restart into recovery or wherever you want.
Hope I could help :highfive: