Related
I've got a Telus HTC Desire unlocked and being used on Rogers. It's rooted and flashed with the proper radio for Froyo (32.43.00.32U_5.09.00.20) and running Cyanogenmod 6.0.0 RC2.
It makes phonecalls and texts just fine, but I cannot for the life of me get 3G working on Rogers. Wifi works fine too, but 3G is just a total no-go.
I've got the APN set up correctly as far as I can tell, and in the settings data is turned on.
Any ideas?
try these settings
Name: Rogers
APN: rogers-core-appl1.apn
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC http://mms.gprs.rogers.com
MMS proxy: 10.128.1.69
MMS port: 80
MCC: 302
MNC: 720
APN type: <Not set>
the_ahmadzais said:
try these settings
Name: Rogers
APN: rogers-core-appl1.apn
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC (can't have this url here due to XDA-Dev new account restrictions, hah
MMS proxy: 10.128.1.69
MMS port: 80
MCC: 302
MNC: 720
APN type: <Not set>
Click to expand...
Click to collapse
You are the king of kings, sir. Thank you so much, problem solved.
Np man . Enjoy ur beautiful desire
vertigo360 said:
I've got a Telus HTC Desire unlocked and being used on Rogers. It's rooted and flashed with the proper radio for Froyo (32.43.00.32U_5.09.00.20) and running Cyanogenmod 6.0.0 RC2.
It makes phonecalls and texts just fine, but I cannot for the life of me get 3G working on Rogers. Wifi works fine too, but 3G is just a total no-go.
I've got the APN set up correctly as far as I can tell, and in the settings data is turned on.
Any ideas?
Click to expand...
Click to collapse
Hi
I am just wondering ... you started with a Desire from telus A8181 and rooted and flashed so you can use it with rogers and have 3G?
I am going to do the same I just want to make sure it will work with rogers 3G and could you also share how do you flash your phone please?
Thank you !!!
The Telus version is A8182
niniderm said:
Hi
I am just wondering ... you started with a Desire from telus A8181 and rooted and flashed so you can use it with rogers and have 3G?
I am going to do the same I just want to make sure it will work with rogers 3G and could you also share how do you flash your phone please?
Thank you !!!
Click to expand...
Click to collapse
Telus and Bell's 3G network share the same frequency spectrum as Rogers. So yes, they should work, provided the phone is setup correct. Thats why all of Canada's big 3 can offer the iPhone.
I signed up just to thank you! Even the Rogers tech support didn't know what to do. Simple when you know, and my HTC Desire has zero APNs available. Soon as I added this, I was online!
In the UK we get these settings text to the phone, read and delete to update settings and I was surprised in Canada this wasn't done. Phone was blind and tech support didn't know to check this.
Now you've shown us how to configure the APN to work, I'd love to see if theres a thread or page on Rogers with the very latest settings, should these be older or mising some details. After all, will the wrong APN details upset a phone plan?
Thank you for your priceless help.
NP lol. And do the apn wouldn't upset the plan.
there is also 1 more apn that I use now is
Name - Rogers
Apn - internet.com
User - wapuser1
pass- wap
And leave the rest I personally like this apn better.
smudgepost said:
I signed up just to thank you! Even the Rogers tech support didn't know what to do. Simple when you know, and my HTC Desire has zero APNs available. Soon as I added this, I was online!
In the UK we get these settings text to the phone, read and delete to update settings and I was surprised in Canada this wasn't done. Phone was blind and tech support didn't know to check this.
Now you've shown us how to configure the APN to work, I'd love to see if theres a thread or page on Rogers with the very latest settings, should these be older or mising some details. After all, will the wrong APN details upset a phone plan?
Thank you for your priceless help.
Click to expand...
Click to collapse
Sent from my X10i TripNMiUI using Tapatalk
Hi I'm from canada and i'm having a problem with getting my phone to work.
I recently bought a Desire HD brand new from telus and am trying to use it on rogers. At first I got a unlock code and put in the rogers apn settings and did the *#*#4636#*#* and set it to unknown ( which i read online ) and it was showing 3g and was working fine.
Then the next day I took the sim card out to back up the numbers on my old phone, but every since then I haven't been able to get 3g again. At first it was just showing g , now it stays on wcdma preferred in the *#*#4636#*#* settings. It also won't allow me to select rogers keeps saying that the sim card does not allow me to select this carrier even though it is a rogers sim card.
I have also restarted it and turned it off many times, made sure that both the sim and sd cards were in properly and still nothing.
Please if anyone can help me with this , I really like the phone but my patience is running out with it .
Hey, I have the L18i Arc S and am unable to get 3g thorough T Mobile or At&t in New York. Now my question is, would I be able to get 3G through any of the service providers by flashing a different ROM ? I know T Mobile frequency doesn't allow that so I guess the only choice left is At&t. Is there anything I can do to get 3G through At&t on my L18i Arc S ?
No, you should have bought a LT18a.
LT18i has no 3G connection is the states as it's missing the US specific frequencies for 3G and 4G/HSPA+
Sent from my iPad 2 using Tapatalk
please help.... LT18a no 3G under straight talk
hey guys, i'm new to XDA. I didn't want to make a new post because it seems that my question has been asked. unfortunately my issue is a bit more technical, I recently bought a lt18a and for the past week I have not been able to get 3G to work. I found a work-around that Straight Talk works under AT&T network so I didn't have to pay their insane prices, but the 3G is not coming up no matter where I went. (I looked up an AT&T tower, drove there just to test out the phone and still nothing) I bought the SIM from straight talk's site and followed their direction on the APN settings I got EDGE to work but no 3G.
I have called straight talk but their infamous awful tech support was no use to me. I also check on other forums and still nothing.
current APN settings:
Network Mode: GSM only
my APN settings
name: Straight talk
APN: att.mvno
Proxy: mvno.tracfone.com
port: 80
username: <not set>
password: <not set>
server: <not set>
MMSC: ( won't let me type this here )
MMS proxy: 66.209.11.33
MMS Port: 80
MCC: 310
MNC :410
authentication type: PAP or CHAP
APN type: <not set>
please help!
HELP!
ziontnk said:
hey guys, i'm new to XDA. I didn't want to make a new post because it seems that my question has been asked. unfortunately my issue is a bit more technical, I recently bought a lt18a and for the past week I have not been able to get 3G to work. I found a work-around that Straight Talk works under AT&T network so I didn't have to pay their insane prices, but the 3G is not coming up no matter where I went. (I looked up an AT&T tower, drove there just to test out the phone and still nothing) I bought the SIM from straight talk's site and followed their direction on the APN settings I got EDGE to work but no 3G.
I have called straight talk but their infamous awful tech support was no use to me. I also check on other forums and still nothing.
current APN settings:
Network Mode: GSM only
my APN settings
name: Straight talk
APN: att.mvno
Proxy: mvno.tracfone.com
port: 80
username: <not set>
password: <not set>
server: <not set>
MMSC: ( won't let me type this here )
MMS proxy: 66.209.11.33
MMS Port: 80
MCC: 310
MNC :410
authentication type: PAP or CHAP
APN type: <not set>
please help!
Click to expand...
Click to collapse
Hello all. This is my first post as well and My friend has the same problem. I did research all over the web and i can't find a normal explanation to why it wont work on AT&T 3G HSPA + network. Does anyone have any info on this matter? All help is greatly appriciated.
If you set it to GSM only, then 3G is turned off/not in use. You need to set it to use WCDMA preferred.
Sent from my Xperia Arc S using xda premium
Someguyfromhell said:
If you set it to GSM only, then 3G is turned off/not in use. You need to set it to use WCDMA preferred.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
Thank you! I will try. Do you have the same phone running on ST network @ 3g speed?
4tele said:
Thank you! I will try. Do you have the same phone running on ST network @ 3g speed?
Click to expand...
Click to collapse
I use my Arc S in 3G, but I live in Europe.
Sent from my Xperia Arc S using xda premium
Hi
So long story short, my Tmo GS3 got stolen at my work :/
So my mom gave me her ATT GS3 cus she was up for an upgrade,
i been reading its possible to get 4G on an ATT GS3 but so far no luck,
i know i have the right APN cus i copied the one from my Nex4 to my GS3, i set the network to manual and choose Tmo, but still all i get is Edge.
Does it have to do something with the way i unlocked the phone?
I been reading it has to be factory unlock and i unlocked mine by dialing *#197328640# and doing the required steps.
Can anyone help me with this?
orphan22 said:
Hi
So long story short, my Tmo GS3 got stolen at my work :/
So my mom gave me her ATT GS3 cus she was up for an upgrade,
i been reading its possible to get 4G on an ATT GS3 but so far no luck,
i know i have the right APN cus i copied the one from my Nex4 to my GS3, i set the network to manual and choose Tmo, but still all i get is Edge.
Does it have to do something with the way i unlocked the phone?
I been reading it has to be factory unlock and i unlocked mine by dialing *#197328640# and doing the required steps.
Can anyone help me with this?
Click to expand...
Click to collapse
Do a little bit of search work; it depends on the coverage for T-Mobile in your area. It's still a Work in Progress to get the 1700 Mhz band to work on a ATT GS3 since there's a bounty for it in the General section.
Setting the APN to what you have on the Nex4 won't do anything because it's all software and hardware controlled. The software part is currently locked down because no one knows what to change to get the hardware to send and recieve information from the 1700Mhz Band.
Your best bet is to check the coverage map and hope you get 3G service or wait until T-Mobile Rolls out their 4G so the old EDGE will switch onto HSPA for ATT devices that use a T-Mobile Network.
Hope this helps
hD
orphan22 said:
Hi
So long story short, my Tmo GS3 got stolen at my work :/
So my mom gave me her ATT GS3 cus she was up for an upgrade,
i been reading its possible to get 4G on an ATT GS3 but so far no luck,
i know i have the right APN cus i copied the one from my Nex4 to my GS3, i set the network to manual and choose Tmo, but still all i get is Edge.
Does it have to do something with the way i unlocked the phone?
I been reading it has to be factory unlock and i unlocked mine by dialing *#197328640# and doing the required steps.
Can anyone help me with this?
Click to expand...
Click to collapse
I was wondering myself smdh when im in landover md. I get good 4g. And soon as get greenbelt md all get is edge. Or maybe 3g. Or h
Sent from my SGH-I747 using Tapatalk 2
Try these apn settings if they arent what you're already using. They've worked for S3 users before.
Name: Straight Talk
APN: att.mvno
Proxy: <not set>
Port: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
APN Type: default,supl,mms,hipri
xBeerdroiDx said:
Try these apn settings if they arent what you're already using. They've worked for S3 users before.
Name: Straight Talk
APN: att.mvno
Proxy: <not set>
Port: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port: 80
APN Type: default,supl,mms,hipri
Click to expand...
Click to collapse
Arent those att apns? I need it to work foor tmo...
Sent from my Nexus 4 using xda app-developers app
orphan22 said:
Arent those att apns? I need it to work foor tmo...
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
correct. my mistake. posted the wrong ones. what are your current apn settings?
i came across these:
APN: epc.tmobile.com
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:
MMS Port:
MCC: 310
MNC: 260
Authentication Type:
APN Type: default,supl,admin,dun,mms
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
and this one as well.
Name : T-Mobile LTE
APN: fast.tmobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,mms
xBeerdroiDx said:
correct. my mistake. posted the wrong ones. what are your current apn settings?
i came across these:
APN: epc.tmobile.com
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:
MMS Port:
MCC: 310
MNC: 260
Authentication Type:
APN Type: default,supl,admin,dun,mms
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
and this one as well.
Name : T-Mobile LTE
APN: fast.tmobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,mms
Click to expand...
Click to collapse
In going to try them. Thanks a lot.
Sent from my Nexus 4 using xda app-developers app
HermitDash said:
Do a little bit of search work; it depends on the coverage for T-Mobile in your area. It's still a Work in Progress to get the 1700 Mhz band to work on a ATT GS3 since there's a bounty for it in the General section.
Setting the APN to what you have on the Nex4 won't do anything because it's all software and hardware controlled. The software part is currently locked down because no one knows what to change to get the hardware to send and recieve information from the 1700Mhz Band.
Your best bet is to check the coverage map and hope you get 3G service or wait until T-Mobile Rolls out their 4G so the old EDGE will switch onto HSPA for ATT devices that use a T-Mobile Network.
Hope this helps
hD
Click to expand...
Click to collapse
I get really good 4G over 18MB on my nex4.
Sent from my Nexus 4 using xda app-developers app
Hey orphan did it work
Sent from my SGH-T959V using xda premium
HolyGhostBoy1 said:
Hey orphan did it work
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
No :/ still only edge. Is there a way to know what band 1700Mhz for example do i get in mi zone?
Sent from my Nexus 4 using xda app-developers app
I had the same situation: only edge, after flashing this files i have 4g http://forum.xda-developers.com/showthread.php?t=1771021&page=25.
Start reading from post #246. If you flash the files you must root your phone like it is a t999, also goes for recovery, im not sure about kernel and DO NOT flash another modem/radio.
Alright guys, I have this weird problem with my S4. Most of the time my mobile data doesnt work nor show the lte symbol even when data is enabled. Everytime I disconnect from my wifi, my data doesnt come on after a while. Do i need to update my modem or any other solution? I've attached done pictures to show it and my device info.
Sent from my SGH-M919 using Tapatalk 2
check your APN & make sure its selected. Try that to see if that helps or not.
I had the same exact issue. Your baseband is MDB and your build is MDL. Your network settings are LTE/GSM auto. Change it to GSM/WCDMA, if you get back your 4G icon then you'll need to either flash a MDB build or just Odin the stock MDL tar file. I did a full wipe and Odin the MDL tar and that fixed my problem.
Sent from my SGH-M919 using Tapatalk 2
Sounds like a apn setting mismatch, if you could send screenshot of your apn id better be able to tell and help you fix
Sent from my SGH-M919 using Tapatalk 2
Xcor3 said:
Alright guys, I have this weird problem with my S4. Most of the time my mobile data doesnt work nor show the lte symbol even when data is enabled. Everytime I disconnect from my wifi, my data doesnt come on after a while. Do i need to update my modem or any other solution? I've attached done pictures to show it and my device info.
Click to expand...
Click to collapse
Try using these APN settings, It worked for someone in the wicked thread:
Name : T-Mobile LTE
APN: fast.tmobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,mms
Works as it should now. Thank you
Sent from my SGH-M919 using Tapatalk 2
saldebot said:
Try using these APN settings, It worked for someone in the wicked thread:
Name : T-Mobile LTE
APN: fast.tmobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,mms
Click to expand...
Click to collapse
Hey do u have the international gt-i9500 and are using it on Tmobile. If so how do u get network data to get anything besides edge?
calibachrome said:
Hey do u have the international gt-i9500 and are using it on Tmobile. If so how do u get network data to get anything besides edge?
Click to expand...
Click to collapse
Sorry bro, I have the TMO SGH-M919....
I thought matching baseband and software would help me, but it didn't. Was on the phone with tmobile for 40 minutes. I wasnt getting any data in LTE settings while my friend with the note 2 standing next to me was in 4g mode. New phone was sent out next day free, got it yesterday and all is working. Even updated to official MDL
saldebot said:
Try using these APN settings, It worked for someone in the wicked thread:
Name : T-Mobile LTE
APN: fast.tmobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,mms
Click to expand...
Click to collapse
Hey! This began to work for me. But I have a question - I don't see MMS protocol anywhere in the aPN settings. I set everything else. Is that alright?
I need to try this I have note 2 getting lte and my girlfriend phone is not
this is the correct one..
Name: T-Mobile US
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: Not set
MMS port: Not set
MCC: 310
MNC: 260
Auth: Not set
APN type: default,mms,supl
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
Mine is not working too.. my mobile data has not working even I reset it.. what to do?
AxAtAx said:
this is the correct one..
Name: T-Mobile US
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: Not set
MMS port: Not set
MCC: 310
MNC: 260
Auth: Not set
APN type: default,mms,supl
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
Click to expand...
Click to collapse
Do these settings vary by region?
State? Time zone?
Or can this be applied to any phone anywhere.
Pp.
Just curious as I'm having the same issue. I've got the t919 but I'm running on at towers (net10) I had no issues until I loaded a custom ROM. Could it be because I flashed a tmo ROM or should I use a att based ROM?
Hi, I was wondering if anyone else had a similar problem or can help with a solution. I just got my Oppo 7 (love this thing) but it seems the network doesn't work properly. The network seems to be picked up just fine, full bars, under network settings it automatically acquires the APN settings and everything, but I can't do anything over the air without WiFi. As soon as the WiFi is gone, I can't browse the internet, send or receive text messages, etc. What do?
Will this help? Won't be LTE, but H+ (my phone doesn't have LTE)
APN: att.mvno
Proxy : wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS Port: 80
MCC: 310
MMC: 410
APN Type: default,supl,mms
APN Protocol: IPv4
APN Roaming: IPv4
Chuteboxe39 said:
Hi, I was wondering if anyone else had a similar problem or can help with a solution. I just got my Oppo 7 (love this thing) but it seems the network doesn't work properly. The network seems to be picked up just fine, full bars, under network settings it automatically acquires the APN settings and everything, but I can't do anything over the air without WiFi. As soon as the WiFi is gone, I can't browse the internet, send or receive text messages, etc. What do?
Click to expand...
Click to collapse
I have mine set up on T Mobile and I'm having the same problem. It's pretty annoying. I've tried a factory reset to no avail. My phone downloaded an update this morning which I hoped would fix the problem, but it looks like it hasn't.
Chuteboxe39 said:
Hi, I was wondering if anyone else had a similar problem or can help with a solution. I just got my Oppo 7 (love this thing) but it seems the network doesn't work properly. The network seems to be picked up just fine, full bars, under network settings it automatically acquires the APN settings and everything, but I can't do anything over the air without WiFi. As soon as the WiFi is gone, I can't browse the internet, send or receive text messages, etc. What do?
Click to expand...
Click to collapse
That's odd. There's one thing wrong with this device on stock - its APN database for AT&T is 3-4 years out of date. It was still using the wap.cingular APN when I turned mine on.
You need to manually put in the AT&T LTE APN (pta). ALSO if you've never owned an LTE device before you'll need to talk to AT&T to have your account updated. (Using the pta APN with a Nexus 5 resulted in no data for me too until I had my plan/account updated. You can do this without an actual contract change - for example I'm still grandfathered in to "unlimited data"). In general I would recommend doing this in-person at an AT&T-owned store, not at the phone and not at a franchisee (like most small mall kiosks).
Thanks for the reply everyone, I entered in the new ATT HSPA+ APN and it works like a charm now.
Could you post your settings?. I confirmed the SIM I got yesterday was lte capable but still no dice.
Sent from my X9006 using XDA Free mobile app
jgunna405 said:
Could you post your settings?. I confirmed the SIM I got yesterday was lte capable but still no dice.
Sent from my X9006 using XDA Free mobile app
Click to expand...
Click to collapse
Just putting in the pta APN with no other info was enough for me.
(MMS is probably borked for me until I fill in the right settings for it but I use MMS maybe once every 3 years at most.)
Entropy512 said:
Just putting in the pta APN with no other info was enough for me.
(MMS is probably borked for me until I fill in the right settings for it but I use MMS maybe once every 3 years at most.)
Click to expand...
Click to collapse
I just realized that you were in here Entropy. I appreciate the work you did with the Galaxy S2 (last phone I had before this one). Do you plan on doing any dev work with this one or are you going to take it easy?
mmsc: http://mmsc.mobile.att.net
mms proxy: proxy.mobile.att.net
mms port: 80
apn type: default,mms.supl
That's what I have currently and mms works fine.
jgunna405 said:
I just realized that you were in here Entropy. I appreciate the work you did with the Galaxy S2 (last phone I had before this one). Do you plan on doing any dev work with this one or are you going to take it easy?
mmsc: http://mmsc.mobile.att.net
mms proxy: proxy.mobile.att.net
mms port: 80
apn type: default,mms.supl
That's what I have currently and mms works fine.
Click to expand...
Click to collapse
I'm working on lighting up omni. Oppo sent us a few devices.
Thanks for the MMS info, I should stick that into my device.
jgunna405 said:
I just realized that you were in here Entropy. I appreciate the work you did with the Galaxy S2 (last phone I had before this one). Do you plan on doing any dev work with this one or are you going to take it easy?
mmsc: http://mmsc.mobile.att.net
mms proxy: proxy.mobile.att.net
mms port: 80
apn type: default,mms.supl
That's what I have currently and mms works fine.
Click to expand...
Click to collapse
I pulled the APN configs for ATT Phone APN from omni's github (I updated it a few months back to what it was from an AT&T stock TouchWiz Galaxy S4 ROM, so it this is update-to-date afaik)
I've bolded the ones that you actually need to touch, otherwise, don't touch them
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,subl,mms,hipri (no spaces between them!!!!)
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (this should be grayed out anyway)
Bearer: Unspecified
jakew02 said:
I pulled the APN configs for ATT Phone APN from omni's github (I updated it a few months back to what it was from an AT&T stock TouchWiz Galaxy S4 ROM, so it this is update-to-date afaik)
I've bolded the ones that you actually need to touch, otherwise, don't touch them
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,subl,mms,hipri (no spaces between them!!!!)
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (this should be grayed out anyway)
Bearer: Unspecified
Click to expand...
Click to collapse
I have this as my settings now and still only get H+. (except for the mmsc, you have 3 m's)
Weird thing is that I get 0 connection when I change from phone to pta.
Not sure if locale is the culprit. I'm in Oklahoma City.
Sent from my X9006 using XDA Free mobile app
jgunna405 said:
I have this as my settings now and still only get H+. (except for the mmsc, you have 3 m's)
Weird thing is that I get 0 connection when I change from phone to pta.
Not sure if locale is the culprit. I'm in Oklahoma City.
Sent from my X9006 using XDA Free mobile app
Click to expand...
Click to collapse
whoops made a typo, yea it's only 2 m's in mmsc
try applying ATT Phone apn and rebooting,,
that's weird. did you call AT&T to confirm that you have the LTE data package on your account like Entropy512 stated ?
jakew02 said:
whoops made a typo, yea it's only 2 m's in mmsc
try applying ATT Phone apn and rebooting,,
that's weird. did you call AT&T to confirm that you have the LTE data package on your account like Entropy512 stated ?
Click to expand...
Click to collapse
I went to the ATT store, but they weren't any help. They confirmed that the SIM they gave me was lte compatible, but I assumed that's the same thing as having an LTE data package. I'll give them a call tonight and let you all know. (btw, just re-applied your settings and still no luck)
edit: called.. and they claim that all accounts have lte compatibility now and of course she had never heard of the OF7a
The settings entropy posted were the exact settings my N5 had which I copied over and worked fine. One thing to be aware of is that mine says 4G on LTE and then either H or H+ for those, not sure if this applies only to my service area or what and another might show differently. At any rate if you're getting 4G showing you might wanna run speedtest and see if you are getting LTE.
jgunna405 said:
I went to the ATT store, but they weren't any help. They confirmed that the SIM they gave me was lte compatible, but I assumed that's the same thing as having an LTE data package. I'll give them a call tonight and let you all know. (btw, just re-applied your settings and still no luck)
edit: called.. and they claim that all accounts have lte compatibility now and of course she had never heard of the OF7a
Click to expand...
Click to collapse
AT&T's SIMs have been LTE compatible for years, even before AT&T had an LTE network. I need to check to be sure, but I'm fairly certain my SIM is still the original "cut down SIM" that I've had since 2011 at least.
It's your account that needs to be LTE-enabled.
Don't call. Phone support is awful. Go to a corporate-owned AT&T physical store. That's where the competent staff are.
(In my case, I originally did the LTE upgrade on a Nexus 5 - if you put a SIM into a Nexus 5 that doesn't have LTE on the account, you'll get a text message saying to call AT&T.)