Related
I got the following message attempting to update my radio version to 2.15:
Amend Scripting (update-script) is no longer supported.
Amend Scripting was deprecated by Google in Android 1.5
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Pleases switch to Edify scripting (updater-script and update-binary) to create working up zip packages.
Installation aborted.
I am very sorry for bring up dead horse type topics, but all the research I try and do leads to circles for me. I'm as experienced with all of this (hopefully someday).
I tried to follow the instructions from
wiki.cyanogenmod.com/index.php?title=HTC_Evo_4G:_Full_Update_Guide
Is there another way to trick this update into installing maybe?
I used RomManager v3.0.1.1 and used Install ROM from SD Card. It probably flashed the message I got above but I wasn't able to see it.
I used Recovery mode and tried to do it manually, which is where I was able to see the error message..
I have an eery feeling I should be using Amon Ra vs. ClockworkMod ??
thank you!
EricFi said:
I got the following message attempting to update my radio version to 2.15:
Amend Scripting (update-script) is no longer supported.
Amend Scripting was deprecated by Google in Android 1.5
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Pleases switch to Edify scripting (updater-script and update-binary) to create working up zip packages.
Installation aborted.
I am very sorry for bring up dead horse type topics, but all the research I try and do leads to circles for me. I'm as experienced with all of this (hopefully someday).
I tried to follow the instructions from
wiki.cyanogenmod.com/index.php?title=HTC_Evo_4G:_Full_Update_Guide
Is there another way to trick this update into installing maybe?
I used RomManager v3.0.1.1 and used Install ROM from SD Card. It probably flashed the message I got above but I wasn't able to see it.
I used Recovery mode and tried to do it manually, which is where I was able to see the error message..
I have an eery feeling I should be using Amon Ra vs. ClockworkMod ??
thank you!
Click to expand...
Click to collapse
I agree that you should be using Amon Ra recovery. I would change to Amon Ra, and then try flashing the radios. That shouldn't give you any troubles. I'll attatch a PC36IMG of Amon Ra. Download it, be sure it is named PC36IMG, and put it on the main directory of your sd card. Boot into the bootloader, wait for it to scan and then ask you to update. Select volume up to accept the update. It will then flash Amon Ra V2.3. Once it's done, boot into recovery. It should now be Amon Ra Supersonic V2.3. Try flashing the radio update again, and it should work now
Thank You very much for the help!
It worked perfectly!
And.. I see Nandroid now!
The radio update took affect after the reboot and hopefully I'll see some results from it.
Now to get the nerve up to put a ROM and kernal on, although I don't know if I need a new kernal, but the update guide I looked at said the cyanogen rom should be installed with the Toast kernal.. so I suppose I'll do that too since it's seems to be what everyone else has been doing too..
Thank you again for the help/advice..
Hope one day I'll b
EricFi said:
Thank You very much for the help!
It worked perfectly!
And.. I see Nandroid now!
The radio update took affect after the reboot and hopefully I'll see some results from it.
Now to get the nerve up to put a ROM and kernal on, although I don't know if I need a new kernal, but the update guide I looked at said the cyanogen rom should be installed with the Toast kernal.. so I suppose I'll do that too since it's seems to be what everyone else has been doing too..
Thank you again for the help/advice..
Hope one day I'll b
Click to expand...
Click to collapse
Your welcome. I'm glad it worked out well. And you should have no trouble flashing roms, as the radio flash is far more 'dangerous' than flashing roms or kernels! Just be sure to make a nandroid backup of your stable system before changing roms or kernels. And wipe data, cache, and dalvik before a rom flash. Wipe just cache and davlik for a kernel flash. You'll be all set.
Sent from my PC36100 using XDA App
kernels
Last question, hopefully..
I've been reading up on whether or not to install a kernal after the rom.
I decided I'm going to try the MikFroyo4.5 Rom or cyanogen 6
It seems there's a debate as to whether or not an updated kernel is needed.
I decided on: netarchy 4.3.1-cfs-havs-nosbc
My big question.. Do I really need to do this?
I did a Nand Backup and it went well.
I'm going to do another in the morning because I'm paranoid, and clear off the backup files from my SD to my local hard drive, and make a list of the apps I have on it.. although I uninstalled quite a few just because.
I tried Titanium backup and it's installed, but the icon doesn't show.
So it sounds to me like my 2.1 is ready for retirement!
The most confusing part is to me is the kernel's.. I must have blinders on, I can't really find a real reason to update them aside from possibly more battery life or a speed enhancement?
If my 4G breaks.. it was meant to be!
Thank you!
EricFi said:
Last question, hopefully..
I've been reading up on whether or not to install a kernal after the rom.
I decided I'm going to try the MikFroyo4.5 Rom or cyanogen 6
It seems there's a debate as to whether or not an updated kernel is needed.
I decided on: netarchy 4.3.1-cfs-havs-nosbc
My big question.. Do I really need to do this?
I did a Nand Backup and it went well.
I'm going to do another in the morning because I'm paranoid, and clear off the backup files from my SD to my local hard drive, and make a list of the apps I have on it.. although I uninstalled quite a few just because.
I tried Titanium backup and it's installed, but the icon doesn't show.
So it sounds to me like my 2.1 is ready for retirement!
The most confusing part is to me is the kernel's.. I must have blinders on, I can't really find a real reason to update them aside from possibly more battery life or a speed enhancement?
If my 4G breaks.. it was meant to be!
Thank you!
Click to expand...
Click to collapse
You don't have to change kernel if you don't want to, but there's really no reason not to, as long as you have a solid nandroid backup to go back to. Roms come with a kernel cooked into it already, so its not required that you change it You always have the option change kernels, and there are various reasons to change them. Every phone may run differently on the same kernel . The kernel that comes baked into a rom may be great for one guy, but horrible on your phone. It takes a bit of playing around to find out which kernels are best for your phone. You may notice that with some kernels, your battery life is garbage, or the phone lags, or you get random reboots etc. Others you'll find perform great and have great battery life. A kernel that runs good on one rom may or may not run good on a different rom. There are a lot of variables, and as I said, you need to find out which ones work good for you, by trying them out. And be sure to use sense kernels on sense, and aosp kernels on aosp (goes without saying, but I've seen people make that mistake)
Sent from my PC36100 using XDA App
What should I do when I want to flash a ROM that requires the new CWM3, I prefer using 2.5.0.5 personally and was wondering if theres something I can do, or have to updat recovery to flash the ROM
Honestly though, the 3.* series is almost as good as 2.5.* The only issue I've had were some wiping issues with 3.0.0.5 but it's getting better. Why go back when it's better to move forward?
ACD168 said:
What should I do when I want to flash a ROM that requires the new CWM3, I prefer using 2.5.0.5 personally and was wondering if theres something I can do, or have to updat recovery to flash the ROM
Click to expand...
Click to collapse
There's only a few "edge case" situations when a ROM would require CWM3, and in those cases there's not much you can do to get it to work on CWM2, short of hacking CWM2 with a new kernel and system tools.
That said, you should upgrade to 3.0.0.8 for many, many reasons. See this thread:
http://forum.xda-developers.com/showthread.php?t=970032 for those reasons and tips on upgrading.
i could help you setup dsixda's kitchen, it will give you options for roms like converting to cwm3, zipalign,signing, etc..
Thanks everyone, I jumped ship to 3.0.0.8. Appreciate everyone's help and input!
A few questions though
1) I rock SkyRaider3.5 still, will this install with this recovery on a fresh install since the ROM was built pre CWM3. AND if not how can I do a fresh install on these ROMs until they are updated, is their a way to make it CWM3 compatible or no maybe I'm way off?
2) I had skyraider running, updated CMW from 2 to 3, THEN made a backup. this should work fine right?
Thanks guys!
I need help fast...
I got my Htc Incredible replace today and as soon I got it I rooted the phone and I use a custom recovery image to root.. everything went well but when I got the Rom manager from the market and now its asking me to flash a recovery but I dont want to flash to the v3.. I wanna stay with the 2.5 version is there any way I can flash a image with rom manager instead of flashing the new version..
thanks .
EDIT: re-read post.
If you rooted with the latest unrevoked, you should be on 2.5 anyway. The latest ROM Manager only works with the 3.x recoveries. So, either don't use rom manager, (Flash stuff manually) or upgrade.
-----------------------------------------------------------------------------------------------------------------
All the CWM recoverie are here. http://mirrorbrain.cyanogenmod.com/cm/recoveries/
2.5.1.2 here, RM should be able to flash it.
http://mirrorbrain.cyanogenmod.com/cm/recoveries/recovery-clockwork-2.5.1.2-inc.zip
And there's always 2.5.0.5 PB31IMG.zip, via unrevoked forever.
http://downloads.unrevoked.com/forever/recovery/clockworkmod/PB31IMG.ZIP
If you want the older version of CWM to persist, don't update it in rommanager. Note that when flashing stuff, you do it through recovery, not rommanager.
I have the older CWM, rommanager v 3.0.7, works to create backups. Use recovery to flash and restore.
Sent from my ADR6300 using XDA Premium App
Welp
Personally, I stay away from RomManager. Have never seen something work in RomManager that didn't also work (better) straight out of CWM Recovery.
I am still on 2.5.x.x as well; 3.0.0.5 and 3.0.0.8 seem to cause WAY too much trouble, and there is no clarification from Koush that he is resolving those bugs.
I would love to see an answer on this. I can go back to 2.5 but...
Some of the newer roms require you to use 3.xx.xx Most say to use 3.0.0.7. I would love to but when I set to this version my phone shows no recovery. Just a black screen. I can still push the buttons and get the actions to work, from memory, but this is not a solution. Is anyone else have the "black screen" issue?
Great Offender said:
I would love to see an answer on this. I can go back to 2.5 but...
Some of the newer roms require you to use 3.xx.xx Most say to use 3.0.0.7. I would love to but when I set to this version my phone shows no recovery. Just a black screen. I can still push the buttons and get the actions to work, from memory, but this is not a solution. Is anyone else have the "black screen" issue?
Click to expand...
Click to collapse
I think 3.0.0.7 had an SLCD issue. You must have an SLCD Incredible. You might try 3.0.0.8, I believe it works fine with the newer Incredibles.
Welcome!
Hello, these roms were made in order for people to have recovery-flashable zips of stock roms (not having to rely on tars and Odin). These roms are compiled from Odex and Deodex system dumps and have no other mods besides root, busybox and recovery.
***Disclaimer***
I am not responsible for any damage, be it mental, physical, mechanical, etc caused by the flashing of this rom. If you flash it, you do so at your own risk. Glad we could get that out of the way
If any developers want to use these as a base rom, there is no need to ask. Just grab em and go. I made these for themers and other rom developers who don't usually work at making the rom itself, but taking what's there and making it better. I hope it helps out!
First the shout outs:
CNZ (RoadRAGEN) - Updater Script, Odex & Deodex Dump
ptfdmedic - Deodex System Dump
bubby323 and chris41g - for use of kernels and general help.
k0nane - noCIQ mod.
thefredelment, phantomfreak53, darren.wsln1 and lballer59 - Help identifying issues.
And of course the Testers:
henbone11(WR47HANZ), COMEDY, lovinlissa1984, geraldweb, lballer59 and banksj174
The Goods:
Okay, the goods:
EG30 Stock Deodex with root, recovery, busybox WITH No CIQ
EG30 Stock Deodex with root, recovery, busybox WITHOUT the No CIQ mod
EG30 Stock Odex with root, recovery and busybox
The Download links:
Download links can be found here at the ACS Forums!
(Download links to prior versions are in post 2 over there)
Changelog and Features
Version 1 and 2 changelogs in the 2nd post
Changelog
Re-added bubby323's kernel so it is a pure stock rom with ONLY clockwork 5 recovery (no additional features) (all 3 roms)
Removed all non-stock apks and replaced all missing stock apks (only required for the deodex roms)
[/LIST]
Features
Android Version 2.3.4
Kernel Build: bubby323's stock with cwm 5
Rooted with SU v3.0 with fully updated binaries(thanks to cnz(RoadRAGEN))
busbox latest version(thanks to cnz(RoadRAGEN)
ClockworkMod Reocvery version v5.x (thanks to bubby323's kernel)
No-CIQ mod (one of the deodex roms only)(thanks to k0nane)
All stock apps/widgets included (I have removed nothing that came stock)
Pick Which SD Card You Want Recovery to Read
For now, the recovery on the kernels in these roms tells CWM to read from the internal memory card. If you want it to read from the external memory card go here and download the "Latest Compiled Version". Flash in Odin and CWM will work with the external sd card. These roms run the link under "Older releases".
Installation Instructions
For those who just wanna use it as their daily drivers, here's the installation instructions:
ALWAYS MAKE A NANDROID BEFORE YOU FLASH ANYTHING!!!!! <-----Words to flash by.
1. Download rom, put it on your phone.
2. Boot into recovery.
3. FULL WIPE IS REQUIRED. Data AND cache AND dalvik.
3.5 Go back and make sure step 3 has been completed
4. Flash rom.
5. reboot and enjoy
**Warning**
The flash process and first boot takes a minute. Be patient, it will work!
Known Issues
Okay, for whatever reason, the deodex w/NoCIQ just will not install the MyFiles.apk. This doesn't sound significant. However, without it, the contacts app will Force Close when you attempt to assign a custom ringtone to a contact. There are two workarounds:
1. Get a different file manager, navigate to the sound and manually assign it to a contact.
2. Find the apk (it's in every flashable rom) and install it onto your phone manually.
I will attempt to fix it once an update comes out and I'm forced to play with these roms again. Until then, the workaround works just as well. (thanks lballer59 for finding the problem).
Downloads for older versions found In the 2nd post on this thread
Changelog 10/04/11
Version 1's changelog is in the 2nd post.
Deodex WITH No-CIQ changelog:
Restored the following missing apps:
EmailWidget.apk added
LiveWallpapers.apk added
PicoTts.apk added
SamsungWidget_News.apk added
SamsungWidget_WeatherClock.apk added
SecretWallpaper1.apk
SecretWallpaper2.apk
ShareApp.apk
Swype.apk
Tasks.apk
Added k0nane's NO-CIQ mod
Orange Overscroll Glow (result of the NoCIQ mod)
Added Chris41g's kernel found here
Deodex WITHOUT NO-CIQ mod
Restored the following apks:
EmailWidget.apk added
LiveWallpapers.apk added
PicoTts.apk added
SamsungWidget_News.apk added
SamsungWidget_WeatherClock.apk added
SecretWallpaper1.apk
SecretWallpaper2.apk
ShareApp.apk
Swype.apk
Tasks.apk
Added Chris41g's kernel found here
Odex changelog:
Added Chris41g's kernel found here
Changelog 10/1/2011
Roms were compiled from odex and deodex system dumps
Modified cnz's updater script to fit these roms
Inserted Bubby's Stock Kernel zImage w/ ClockworkMod 4.x
How to flash if I am not rooted stock?
Hi can you provide a just a few more steps for people like me who are still on stock non rooted rom? I know it says save it on and then flash.
Welcome to the party!
Samsung Galaxy S II
Thank you for you hard work And i totaly agree with what you said in your OP.
And the only prob i see is you are using buddy'2 kernel + cmw. From what i understand, and PLEASE correct me if im wrong, THat kenel is still a hack of source and initrams from int sg2. The jury still seems 2b out on wether or not there r issuse with that.
Im still currently looking for totaly stock kernel +root+cmw. IF i new how to make, I would.
again correct me if im wrong and thank you.
spdwiz18 said:
Thank you for you hard work And i totaly agree with what you said in your OP.
And the only prob i see is you are using buddy'2 kernel + cmw. From what i understand, and PLEASE correct me if im wrong, THat kenel is still a hack of source and initrams from int sg2. The jury still seems 2b out on wether or not there r issuse with that.
Im still currently looking for totaly stock kernel +root+cmw. IF i new how to make, I would.
again correct me if im wrong and thank you.
Click to expand...
Click to collapse
+1
Sent from my SPH-D710 using Tapatalk
spdwiz18 said:
Thank you for you hard work And i totally agree with what you said in your OP.
And the only prob i see is you are using buddy'2 kernel + cmw. From what i understand, and PLEASE correct me if im wrong, THat kernel is still a hack of source and initrams from int sg2. The jury still seems 2b out on wether or not there r issuse with that.
Im still currently looking for totaly stock kernel +root+cmw. IF i new how to make, I would.
again correct me if im wrong and thank you.
Click to expand...
Click to collapse
From my understanding the kernel is built from stock source not the sgs2. However, the cwm is built using the sgs2 binaries to save time. I know a new version is being worked on. I have been using Bubby's stock cwm for about a week and it is working great. Using a jig removed the exclamation mark and the i9100 screen so I am happy where I am. But I am looking forward to a new release that is completely stock with hopefully nothing but boot animation support and init.d. I hate having root and busybox built into the kernel. Just a personal issue.
---------- Post added at 10:31 AM ---------- Previous post was at 10:30 AM ----------
Great work absolutezerogi!
CWM first?
Do I need to flash CWM first for this to work? In that case which CWM should I use? I see two versions available.
Thanks.
rukshmani said:
Do I need to flash CWM first for this to work? In that case which CWM should I use? I see two versions available.
Thanks.
Click to expand...
Click to collapse
Yes. I use Bubby's.
Looking for something Stable... Hope I find it here ( ACS are normally stable ) giving it a shot now! Thanks
So far, this seems to be the closest we can get, without actually getting there.
I have tried Zedomax, and had a few LOS', no big deal, but I went back to stock.
If I go back to Zedomax (CWM, SuperUser, Root), can I flash this in CWM and have a completely stock rom with CWM, SuperUser, and Root WITH the stock kernel?
Thanks in advance.
spdwiz18 said:
Thank you for you hard work And i totaly agree with what you said in your OP.
And the only prob i see is you are using buddy'2 kernel + cmw. From what i understand, and PLEASE correct me if im wrong, THat kenel is still a hack of source and initrams from int sg2. The jury still seems 2b out on wether or not there r issuse with that.
Im still currently looking for totaly stock kernel +root+cmw. IF i new how to make, I would.
again correct me if im wrong and thank you.
Click to expand...
Click to collapse
Got your developers backwards lol. Zedomax's first kernel was from source and initramfs from the SGSII international. I pulled the initframfs myself for bubby's kernel, it's stock I promise
Hi can you provide a just a few more steps for people like me who are still on stock non rooted rom? I know it says save it on and then flash.
Click to expand...
Click to collapse
Hi there!
First you must be rooted. If you're not you need to go to one of our root methods and get rooted and get recovery. Then you just flash these in recovery However, I will make the instructions a little more detailed for ya.
Hi guys!
UPDATE: Now includes busybox.
Enjoy!!
Off topic, but do you suppose cm7 will be compiled using this kernel?
Sent from my SPH-D710 using XDA App
asafegous said:
Off topic, but do you suppose cm7 will be compiled using this kernel?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
This is stock rom with TouchWiz and Bubby's completely stock rooted kernel. CM is made fro AOSP (Android Open Source Project) source and then ported to a phone. So, CM won't be using this at all lol.
crap!
UPDATE 2 - back in business. needed to flash stock kernel/rom then let it encrypt, then tell it to decrypt, then re-root, re-flash, back to normal again.
I have a problem, I really hope someone can help.
I followed the directions here, and everything worked great.
i was rocking the rom for about a day and then I noticed in settings that I had an option to "encrypt the phone" so stupidly (and obvoiusly not thinking) i did it and was thrown into a boot loop.
I tried rebooting, and nothing.
I tried booting to recovery, and wiping all, and then reflashing this rom. - nothing
I tried doing the volume down and power, then the volume up thing, and then I reapplied the zImage using heimdall and nothing.
Currently - all I can get to is recovery, I can't mount the the phone (nothing shows up on the computer, maybe because it is encrypted?) So I can't even copy something to the phone to try to flash it
Any ideas? - really deperate here, I can't believe I pulled such a newbie move.
Downloading this as soon as I can. Thanks for your hard work!
Sent from my Galaxy S II
realmrealm said:
UPDATE - So I've been able to get the phone to mount to the computer, but I'm stuck in a loop at this Sprint 4G animation. It just keeps playing it over and over again. (5 minutes now) - I'm just going to let it keep going and see what happens.
I have a problem, I really hope someone can help.
I followed the directions here, and everything worked great.
i was rocking the rom for about a day and then I noticed in settings that I had an option to "encrypt the phone" so stupidly (and obvoiusly not thinking) i did it and was thrown into a boot loop.
I tried rebooting, and nothing.
I tried booting to recovery, and wiping all, and then reflashing this rom. - nothing
I tried doing the volume down and power, then the volume up thing, and then I reapplied the zImage using heimdall and nothing.
Currently - all I can get to is recovery, I can't mount the the phone (nothing shows up on the computer, maybe because it is encrypted?) So I can't even copy something to the phone to try to flash it
Any ideas? - really deperate here, I can't believe I pulled such a newbie move.
Click to expand...
Click to collapse
odin zedos v3 to get cwm then flash this to get back where you want, pm me if you need help.
op, great work on this sir.
realmrealm said:
UPDATE - So I've been able to get the phone to mount to the computer, but I'm stuck in a loop at this Sprint 4G animation. It just keeps playing it over and over again. (5 minutes now) - I'm just going to let it keep going and see what happens.
I have a problem, I really hope someone can help.
I followed the directions here, and everything worked great.
i was rocking the rom for about a day and then I noticed in settings that I had an option to "encrypt the phone" so stupidly (and obvoiusly not thinking) i did it and was thrown into a boot loop.
I tried rebooting, and nothing.
I tried booting to recovery, and wiping all, and then reflashing this rom. - nothing
I tried doing the volume down and power, then the volume up thing, and then I reapplied the zImage using heimdall and nothing.
Currently - all I can get to is recovery, I can't mount the the phone (nothing shows up on the computer, maybe because it is encrypted?) So I can't even copy something to the phone to try to flash it
Any ideas? - really deperate here, I can't believe I pulled such a newbie move.
Click to expand...
Click to collapse
I'm also going to PM with these instructions so I can be sure they get to you faster.
Go here: http://forum.xda-developers.com/showthread.php?t=1282420
download the stock tarball made by crawrj
boot into download mode (volume down + power)
Odin that tar. It'll return you to pure stock (unrooted, stock everything). You should be able to boot then. Do a factory reset once you do (to wipe everything), then you should have a functioning phone to re-root and do whatcha want. Let me know if that works.
Thank you so much OP. I flashed to v4 of Zedomax, then I flashed your ROM in CWM, and now I have everything. CWM, SuperUser, and all of my root apps are working on a deodexed ROM!!!
Thanks again.
Sent from my Galaxy S II
The GT-P1010 it's a forgotten device by Samsung, knowing that it has the capabilities to run some of the most updated versions of android we are still waiting for advanced developers to port it, In the mean time I bring you today a themed ROM just to resemble the look of android Jelly Bean. It was a pleasure to develop for this device and you end users. In the future there will be more updates based on your feedback and if I still own the device. Now you can grab and go with your tab it has everything you need.
IMPORTANT: Advanced knowledge of what your doing it's required, I'm not responsible for the mismanagement of your device, soft-brick or hard-brick. Still, I'm here to help you with whatever you need.
WHAT'S NEW?
The Android system it's pretty much the same, the ROM is based on Android Gingerbread 2.3.6 KPO latest update for UK.
The status bar has been resized and extracted what was not needed, the toggles has been resized as well to gain more notification area on portrait and more importantly in landscape mode, added transparency too.
Theme for Settings and Main Menu is now black
Added new icons to resemble Jelly Bean.
New pop dialogs, menus, bars, buttons, radios, checks and more
Colors for the status bar clock and icons.
Added new JB keyboard
Replaced stock launcher with a modded version of Nemus Launcher, faster and very customizable.
Added new wallpapers to the gallery.
Rooted + busybox
Lockscreen animation and time position
Roboto font
New Sounds and ringtones
MXPlayer with codec
Dolphin + JetPack for full website browsing
[*]Complete animated UI
WHAT DO I NEED?
STOCK ROM GB 2.3.6 2012 July P1010XXKPO P1010XEUKPO
http://www.hotfile.com/dl/163467092/cef6ba6/P1010XXKPO_P1010XEUKPO_XEU.zip.html (mirror later)
CWM RECOVERY v5.0.2.7 + ROOT (thanks to MadTeam and Motafoca) ROM WORKS ONLY WITH THIS NO OTHER AND STOCK KERNEL [email protected]#1
http://sourceforge.net/projects/jbromgtp1010bk2/files/madteam-cwm-p1010-kpi.tar/download
ODIN v1.61
http://sourceforge.net/projects/jbromgtp1010bk2/files/ODINv1.61.zip/download
JBROM FINAL V1.0 BK201EKY
http://sourceforge.net/projects/jbromgtp1010bk2/files/NANDROID_JBROM_FINAL_V1.0_BK201EKY.rar/download
USB DRIVERS (if you need)
http://hotfile.com/dl/133929348/9107244/SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0.zip.html
PROCEDURE: For Windows only, Win7/8 x86/x64
1. MAKE A NANDROID BACKUP!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1059485
2. Charge your battery up to 40%
3. DOWNLOAD MODE: Turn off you tab, press and hold volume DOWN and POWER, A yellow triangle will appear with an android working in it, you are now in download mode.
4. ODIN: With your tab in download mode, open Odin3+v1.61.exe and plug it to the computer usb port, ID:COM text fiel most turn yellow, if not, you probably have to reinstall your USB Drivers, once that is yellow click on the PDA button and select the file: P1010KPO_P1010XEUKPO_HOME.tar.md5 and hit START in the Control Panel. After a few minutes your tab will boot in Stock KPO GB 2.3.6 android, turn off your tab again.
5. CWM Recovery + ROOT: Turn your tab into download mode once again and plug it, hit RESET in ODIN Control Panel, now click on PDA once more and select the file: madteam-cwm-p1010-kpi.tar hit START. Your tab will reboot and load android now with the Recovery Manager installed and it's now rooted (root the device may void your guaranty).
6. JBROM FINAL V1.0 BK201EKY: Transfer your downloaded file: "NANDROID_JBROM_FINAL_V1.0_BK201EKY.rar" to the following path:
"/sdcard:/clockworkmod/backup" (if doesn't exist create folders all lowercase) paste and extract here. From the app drawer selecet CMW Manager, grant superuser, select Recovery mode and Reboot, you are now in CWM Recovery. Navigate using your Vol +/- and Power as selector to: "backup and restore" then: "- restore" now: "- NANDROID_JBROM_FINAL_V1.0_BK201EKY" and finally: "Yes - Restore" once finish choose: "reboot system now" and wait ETA 5mins. Enjoy the ROM :fingers-crossed:
THANKS TO:
Wizard_Polska
bayustev
moxtrom
rfb813
Pranix
anyone else please let me know
PLEASE SUPPORT ME BY DONATING:
I've been BK201EKY from EL SALVADOR
I'll try this rom tonight...than i report back.(right now, my tab using kmicic)
Sent from my GT-S5300 using Tapatalk 2
well, i already try twice to flash.
1. try flash with madteam kpi from their site.(7,6mb). result : after flash jb rom is eternal bootloop.
2.i use madteam kpi from this site (3,9mb). result : stuck on odin half way when going to flash it.
any solution ? i'm back to stock first i think. and used nandroid backup to restore my previus rom.
bayustev said:
well, i already try twice to flash.
1. try flash with madteam kpi from their site.(7,6mb). result : after flash jb rom is eternal bootloop.
2.i use madteam kpi from this site (3,9mb). result : stuck on odin half way when going to flash it.
any solution ? i'm back to stock first i think. and used nandroid backup to restore my previus rom.
Click to expand...
Click to collapse
Did you follow the steps I replied on the General forum?
I would like to know if some else is having the same issue, anyway try this:
Go into Recovery mode, navigate to "mounts and storage" and format
/cache
/data
/system
/datadata
Now start the standard procedure again of installing STOCK KPO and after the ROM
I still stuck on samsung logo boot loop.
What i do is flash from begining (means froyo.had csc file ) than kpo firmware (only pda file)
After that i flash cf root.
In recovery mode i clean all. ( cache, dalvick, battery stat).
Then i flash jbrom rc1.2..wait until 4 mnts its start on samsung boot screen.... and stuck there in boot loop..
Maybe i should wait for other tester. And see the result.
send from p1010 kmicic rom tapatalk 2
bayustev said:
I still stuck on samsung logo boot loop.
What i do is flash from begining (means froyo.had csc file ) than kpo firmware (only pda file)
After that i flash cf root.
In recovery mode i clean all. ( cache, dalvick, battery stat).
Then i flash jbrom rc1.2..wait until 4 mnts its start on samsung boot screen.... and stuck there in boot loop..
Maybe i should wait for other tester. And see the result.
send from p1010 kmicic rom tapatalk 2
Click to expand...
Click to collapse
You tried to load it from FROYO? because rom is for gingerbread not froyo, I know Kmicic and David that's pretty much the best rom out there for p1010
BK201EKY said:
You tried to load it from FROYO? because rom is for gingerbread not froyo, I know Kmicic and David that's pretty much the best rom out there for p1010
Click to expand...
Click to collapse
no. of course not. it's just my procedure.flash from begining.
i flash your rom from fresh kpo..
and about kmicic.indeed a good rom..just one bug in kmicic rom. when usb debug is on, than connect to cable data to pc. always turn off again the usb conection. can't get connection to pc.
i think all rom are good because it's hard to make one.:good:
like your rom, i think is good one if i can get into.:fingers-crossed:
i just back to nandroid back up. that's all.
i wish there some dev can make cf-root from the last stock rom p1010 kpo.
bayustev said:
i wish there some dev can make cf-root from the last stock rom p1010 kpo.
Click to expand...
Click to collapse
New rom uploading, new framework and of course updater-script, I wish there were more testers like you, I thought there was a lot people wanting roms for this device, If there any ways you can spread the news, I won't get mad :good:
BK201EKY said:
New rom uploading, new framework and of course updater-script, I wish there were more testers like you, I thought there was a lot people wanting roms for this device, If there any ways you can spread the news, I won't get mad :good:
Click to expand...
Click to collapse
hey, copy my updater script from kmicic for P1010. I found errors and in my script are fixed
Well..mr wizard you help too? This is great..more hope for forgoten tabs then.love this
send from p1010 kmicic rom tapatalk 2
Wizard_Polska said:
hey, copy my updater script from kmicic for P1010. I found errors and in my script are fixed
Click to expand...
Click to collapse
Hey David how are ya? Thanks for coming by and give me some help and the chance to use your script, I'm doing some test over it right now and I can actually see a full script like CyanoMod, I wasn't really thinking on that yet considering that my script was basic for beta test and that it has always worker for me (only me I see :crying. Every advice you have for me will be very much welcome in this project knowing that your experience with this device is higher than mine. Thanks
BK201EKY said:
Hey David how are ya? Thanks for coming by and give me some help and the chance to use your script, I'm doing some test over it right now and I can actually see a full script like CyanoMod, I wasn't really thinking on that yet considering that my script was basic for beta test and that it has always worker for me (only me I see :crying. Every advice you have for me will be very much welcome in this project knowing that your experience with this device is higher than mine. Thanks
Click to expand...
Click to collapse
hey no problem, this isn't competition so you are free to copy. If you want you could copy files, edit etc.etc. from my rom.
if you want help write to me. I know how to change text under quick icons etc.
Any news mr ?
Sent from my GT-S5300 using Tapatalk 2
bayustev said:
Any news mr ?
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
I made some progress with new script, but colors on the screen are messed up and feels like theres is no HW acceleration, it's 2 am here gotta sleep now, hopefuly tomorrow I'll uploading, this project wont die, one way or another we'll make it work. nite
Good night sir. Nice dream.
Sent from my GT-S5300 using Tapatalk 2
I'm working right now on a way to install the rom as a nandroid backup (temporary)
Check new upload try to install please
Sent from my GT-P1010 using xda app-developers app
it works in my tablet, really nice JB look.
in a some apps (playstore for instance), a lot of fonts in black apear on black background and white in white background.
superuser doesn't work, it ask you for permission but it fails to give them (voltage control fails at boot, DPI cannot be changed, etc...), usb development didn't work either.
Great thanks for testing! You sure you installed CWM + root that I provided? Have you try updating SU from market. Titles in Playstore may appear white but they will get black when it propertly updates in a few minutes.
Sent from my GT-P1010 using xda app-developers app
i downloaded CWM from somewhere else, the file you uploaded in the first post is only 3.X MB, and cannot be flashed with odin.
I looked for the file somewhere else and the file size is about 7.4 MB.