Related
Better Than LIfe
Future Echoes
7-15-11
Update #2 fr the day
Ok, stumbled across something today while trying to work some bugs.....
I managed to "inject" a recovery into the rom, and while it actually booted into recovery, and did recovery things, it even went so far as to boot the tab.
But that was it, didnt get a full boot.
So, I stumbled upon a Clockwork Recovery buy doing the right tricks i suppose, however alot needs to be ironed out. and this gets top priority this weekend, why? well ****, think about it, CWM for the CDMA Tabs for Gingerbread, and before Verizon releases GB, so this.......is great news.
Hope to have this done by end of weekend, and in doing so it might iron out the zip flash issue which means I can pump out those 2 roms.
Just wanted to share.
First, I'm removing the download link.
Second, yes I do get your PM's, and yes I do read them, and Yes, I agree....I am bad at getting back to people sometimes. Very busy trying to get GB out for the CDMA Tabs in a working fashion. I am sorry. Those of you who know me, just call, it does hurt my hands to type.
The Update.
I am yanking the download link as it is apparent that the release was/is a failure, how I managed to get it on my tab, no clue, however I cant duplicate it again.
I am working on the build, 1 for Sprint, 1 for VZW. I am trying to get it deodexed 100%, and at the same time get a VZW 3G build working.
However what is very important, that will take less time for me to flash a build to test.....is a recovery. We need a Gingerbread recovery. We do.
So I am doing a few things.....
1. doing my research on compiling a new kernal, and CWM for our tabs
2. asked for an recieved help in a new kernal and recovery
3. changing how i build these roms, no more "kitchens" or stupid "gui" based apps on Linux or Windslows that foul up the permissions, I am going 100% command line for a more effective result, and less need for revisions.
4. Working non stop through the weekend once my wife comes home from work today, so from noon today, to 3am sunday/monday I will be hard at work on all Better Than Life Releases.
I appreciate your patience in this botched release, next time, ill release a test build to a few people for a backup verification it will go without problem.
Until then, i gotta get to work.
Jim
Update..........7-12 6am
I just spent 5 hours trying every trick in the book... from extracting factory.rfs and trying to rebuild it to forcing a fake recovery... I got nothing. The problem is that ALL of the kernels that exist with CWM are ext4 froyo kernels, but the new kernel source for GB doesn't contain ext4 code... therefore, no flashy (unless by a fluke) because on reboot it tries to mount everything as rfs but it's in ext4 after you flash in an ext4 conversion kernel. I would have to design a new GB kernel with CWM and EXT4 modules in the source or revert a froyo kernel to pre-ext4 and put in a new cwm... either would take a couple of days... but I'm swamped right now. The only choice is for you to set it back up on your device like you had it and then pull a roto. Did what I could, sorry.
Click to expand...
Click to collapse
So, we tried (spacemoose and I) to get the extracted rom from my device to install on several others and ran across the same problems everyone else was having. however, the extracted rom being deodexed and zipalilgned, my device not.
So today I am going to try to get the 3G working, make the mods to the rom, and extract it, then try to inject the deodexed system and framework back in (which is always a ***** on a live device) and ill have no choice for now but to release a Heimdall flashable version of the rom.
I am waiting for that VZW release because with the sprint in my hands, and with a VZW version, all thats lacking is a Sprint tab to start making GB roms for both devices, however today will be a different story.
Oh, I did get TW4.0 to slightly work on the tab, itll either be released later, or maybe in an alpha build. I found it....well interesting. I tried it on the Psirens Rom (I have a TouchWiz4 version of Psirens) but it was way to damn buggy to release.
Ill keep yall posted today. Painpill time
Verizon wants to take their time, fine, screw them.
Gingerbread 2.3.4
Based on the Sprint update
Deodexed
Zipaligned
a little de-bloating
added CDMA/3G Verizon (3G with Verizon right now is a 50/50 shot
Kernal included in flashable zip
Just drop on SD Card, wipe everything
flash
enjoy
I am running this on my daily driver Verizon, to test and work bugs out and get 3G fully working, so expect alot...ALOT of updates and new versions of Gingerbread for Verizon.
This will be a constant updating project. So please expect bugs, and this is a last minute slap together thing tonight.
Enjoy.
More to come
Link
PULLED LINK FOR NOW 7-15-11
Omg thanks
Is this any faster/snappier than the stock SprintGB? I just finished getting it working on my vzw tab and it took me a while to get set up. Is it worth switching?
And btw thank you for all the work you do for the CDMA community, we greatly appreciate it!!
juanv145 said:
Is this any faster/snappier than the stock SprintGB? I just finished getting it working on my vzw tab and it took me a while to get set up. Is it worth switching?
Click to expand...
Click to collapse
Nandroid and try it out. That's what I'll be doing in a few minutes. Thanks Oldmacnut!
dammit. i just got Psirens 2.5 the way i like it. and now i wanna try this. i'm torn with overwhelmingly indecisive ennui now.
when u say 50/50 chance do u mean it may/may not work or itll only work sometimes?
damn seriously lol im trying to check the latest siren and i see this y bother with sirens lol
Macnut, this isent working at all for me. im flashing from your original psyrens mod and it wont flash at all. it said opening package....... cannot open sip,(bad) installation aborted.
wolfie083188 said:
Macnut, this isent working at all for me. im flashing from your original psyrens mod and it wont flash at all. it said opening package....... cannot open sip,(bad) installation aborted.
Click to expand...
Click to collapse
the link just updated. try re-download
indeed I'm lookin for the phone*.apk of VZW GB. is there an update of VZW?
Awesome, am giving this a try now.
Couple of questions:
1. Is this ext4?
2. Can we overclock with this kernel?
Thanks, this is huge for us suffering VZW tab owners!
When trying to install I got an error...something along the lines of, "error at line 11, can't symlink"
djf8 said:
When trying to install I got an error...something along the lines of, "error at line 11, can't symlink"
Click to expand...
Click to collapse
got the same error, it wont install for me
any solution to this? im tired of trying to get it to work. im now back to psyrens rc1 untill any update on this.
wolfie083188 said:
any solution to this? im tired of trying to get it to work. im now back to psyrens rc1 untill any update on this.
Click to expand...
Click to collapse
My "solution" was to just flash the Sprint rooted rom, which works with the VZW tab (not sure about 3g, though, I just use wifi anyway).
Would love it if we could get an ext4 and overclockable kernel working w/ GB for the VZW folks.
Going to download this today. This is almost more exciting than hcomb . I am glad someone is working on a vzm gbread rom.
Thanks Oldmacnut
Sent from my SCH-I800 using XDA App
Same here...
Sent from my ADR6400L using XDA Premium App
wolfie083188 said:
got the same error, it wont install for me
Click to expand...
Click to collapse
Same here...
Sent from my ADR6400L using XDA Premium App
Yeah, I'm sure something was just missed when oldmacnut compiled the zip for us. He'll get it worked out soon enough just hold off for now until there is word from him.
Getting the error as well. I am using the Sprint GB ROM in the meantime...
Oldmacnut can you give us more info on your custom ROM? I am assuming you have it rooted but the Sprint ROM is 190M while yours is 360M. Just wondering what kind of bloatware you removed and what if anything has been added to account for almost 2x the file size. Thanks
Quick question,
I'm rooted w/latest Starburst and ICS theme, and I accidentally allowed the most recent Sprint system update to go forward (12/12/2011 @ 8am [EST]). I did so without asking (here) if this was safe. So is it? I searched other threads and it appears that some recommend going back to stock prior to updating, while other swear that "re-stocking" is unnecessary.
So far (after 10 mins) I still have an exclamation mark triangle with a blue andriod guy. Not sure if this is normal. Thanks!
-Aaron
Aairman23 said:
Quick question,
I'm rooted w/latest Starburst and ICS theme, and I accidentally allowed the most recent Sprint system update to go forward (12/12/2011 @ 8am [EST]). I did so without asking (here) if this was safe. So is it? I searched other threads and it appears that some recommend going back to stock prior to updating, while other swear that "re-stocking" is unnecessary.
So far (after 10 mins) I still have an exclamation mark triangle with a blue andriod guy. Not sure if this is normal. Thanks!
-Aaron
Click to expand...
Click to collapse
If you aren't on the "factory" ODIN odexed ROM with EG30 modem, the update will fail. The update from Sprint relies on the system files being in a particular condition and the update will fail if they are not in that condition.
I have heard that some people have perfectly working phones after rebooting (but not updated). If you want EK02 ROMs, they're available in the development sub-forum and would be easier to manage than returning to stock and accepting this update.
EDIT: You may need to pull the battery to get out of the update. Supposedly once you put the battery in, you'll get to CWM, and then should be able to boot back into Starburst. I haven't done this, so I can't confirm.
Go back to stock.
The update will fail.
Why not flash the update from here? Android 2.3.6 + root is in the development section.
Sources? Personal experience.
Sent from the future.
nivron said:
If you aren't on the "factory" ODIN odexed ROM with EG30 modem, the update will fail. The update from Sprint relies on the system files being in a particular condition and the update will fail if they are not in that condition.
I have heard that some people have perfectly working phones after rebooting (but not updated). If you want EK02 ROMs, they're available in the development sub-forum and would be easier to manage than returning to stock and accepting this update.
EDIT: You may need to pull the battery to get out of the update. Supposedly once you put the battery in, you'll get to CWM, and then should be able to boot back into Starburst. I haven't done this, so I can't confirm.
Click to expand...
Click to collapse
You are correct, I pulled battery, was directed to CWM and rebooted system...all is fine (as it was before).
I saw QBKINGs videos on updating the Modem, but am not sure I want to go through with that until i figure out if the update is worth it. I am still not sure if this was an android version update, or an update that fixes LOS...or both. If I see a majority of members recommending this update, then I guess I'll jump through the hoops.
I tend to not have very much luck with tinkering with my phone. Something always goes wrong and then I loose 2 hrs of my day trying to figure out how to fix it. but I guess that's the name of the game...
SocialReject said:
Go back to stock.
The update will fail.
Why not flash the update from here? Android 2.3.6 + root is in the development section.
Sources? Personal experience.
Sent from the future.
Click to expand...
Click to collapse
I'll check this out.
I know I SHOULD know this, but... what would the process be for getting 2.3.6+ root along with starburst Rom. Would I flash the above recommendation then flash starburst over it, then load my ICS them last?
P.S. please forgive my incorrect use of the technical terms flash and load. As you can see from my questions, I only have a cursory understanding how rooting/flashing/loading.....just enough to get my phone to the customized state that it is currently in.
If it ain't broke.... that's my motto and if you are not savvy with the phone I definitely suggest you leave your setup alone. Using Odin has got to be one of the easiest things to do though but once again if it ain't broke....
Aairman23 said:
I'll check this out.
I know I SHOULD know this, but... what would the process be for getting 2.3.6+ root along with starburst Rom. Would I flash the above recommendation then flash starburst over it, then load my ICS them last?
P.S. please forgive my incorrect use of the technical terms flash and load. As you can see from my questions, I only have a cursory understanding how rooting/flashing/loading.....just enough to get my phone to the customized state that it is currently in.
Click to expand...
Click to collapse
Wasn't aware you were hoping to continue using starburst. I don't think starburst supports EK02 yet.
Sent from the future.
SocialReject said:
Wasn't aware you were hoping to continue using starburst. I don't think starburst supports EK02 yet.
Sent from the future.
Click to expand...
Click to collapse
That was all I really needed to know...I am very happy with starburst... thank you!
Edit: last question For some reason I have a little "arrow loop" or "arrows in a circle" (in grey) in the middle of my top menu bar, and it is partially blocking the time. Did I induce this somehow, how do I make it go away (reboot didn't work)?
playya said:
If it ain't broke.... that's my motto and if you are not savvy with the phone I definitely suggest you leave your setup alone. Using Odin has got to be one of the easiest things to do though but once again if it ain't broke....
Click to expand...
Click to collapse
Indeed. You wouldn't believe how many people make one tiny mistake in Odin and BAM it's all over.
Sent from the future.
Aairman23 said:
That was all I really needed to know...I am very happy with starburst... thank you!
Click to expand...
Click to collapse
No problem
Sent from the future.
Aairman23 said:
That was all I really needed to know...I am very happy with starburst... thank you!
Edit: last question For some reason I have a little "arrow loop" or "arrows in a circle" (in grey) in the middle of my top menu bar, and it is partially blocking the time. Did I induce this somehow, how do I make it go away (reboot didn't work)?
Click to expand...
Click to collapse
The arrows are the sync indicator (for any "pull" accounts or contact/calendar sync). You can check under Settings->Accounts & sync to see if any of your accounts are spinning. You can cancel the sync from there and restart it if you like. Sometimes they get stuck.
Aairman23 said:
Quick question,
I'm rooted w/latest Starburst and ICS theme, and I accidentally allowed the most recent Sprint system update to go forward (12/12/2011 @ 8am [EST]). I did so without asking (here) if this was safe. So is it? I searched other threads and it appears that some recommend going back to stock prior to updating, while other swear that "re-stocking" is unnecessary.
So far (after 10 mins) I still have an exclamation mark triangle with a blue andriod guy. Not sure if this is normal. Thanks!
-Aaron
Click to expand...
Click to collapse
More to the point...I am rooted with stock EG30. Received update and failed so I assume I need to un-root in order to get this to install correct?
jeffvb9 said:
More to the point...I am rooted with stock EG30. Received update and failed so I assume I need to un-root in order to get this to install correct?
Click to expand...
Click to collapse
You can do that, or Calkulin has a Stock EK02 ROM in the dev section, which would be easier.
I've been running my phone stock with the EG30 ROM and radio(s) since the day I got it. I originally rooted it using ODIN just to download su (my applications / data were not effected); I do not recall what this method was called. I have not messed with it since due to lack of time.
Today I got a notice about a new OTA firmware update. I let it try to update but it failed with the following error:
Code:
E: Error in /cache/182a027d4e63.SPH-D710_update_EG30_to_EK02.zip (Status 7)
I could be wrong but this error doesn't seem indicative of a failure to update due to the fact that I have root.
I rebooted the phone and it's still at stock EG30 and it states that there is no update available. The only thing I've tried since was to flash (using stock recovery still) a pre-rooted version of this update but it failed to "signature verification".
Can someone give me a pointer on what I need to do to get this phone updated preferably WITHOUT having to reload my apps/settings?
Thanks!
Followed this thread here and was able to update perfectly without having to wipe my data:
http://forum.xda-developers.com/showpost.php?p=20233048&postcount=376
I think the issue may have been that I previously "integrated into ROM" some software via TB. Now have to figure out how to re-root.
Wayno-san said:
Now have to figure out how to re-root.
Click to expand...
Click to collapse
Very simple, just look at the first post in that thread and choose Option A.
I just got an android 48.6MB software push on my phone today, anyone know what it is? for that matter where are the software pushes stored?
Perhaps the new EK02 update? It has been push for the past days system wide.
Use the search button, it is your friend...
Either way, its an update to get rid of the LOS issues people were having among other bug fixes. and as far as i know, it is stored in /cache
Didnt see it in /cache unless its hidden, thank you for reply it was EK02
Does anyone know how this would trouble rooting?
I know that I had been rooted, I applied the update (since I knew it was coming and what it was for), error message popped up and phone locked. As a result I used CWM and restored an old backup and sure enough everything is fine. Unrooted, factory reset, applied update. I am good.
Now how do I root? Can I root? What root method? I have been using the ZedoMax 4.1 root with Odin but I am not sure that this is the best root out there. Would any of these revert the update?
Thanks!
Booo 2.3.6/EK02 didnt fix shutter, focus sound now, I still wake the baby up if I take a photo. Is there a Non-Root kill for this that works 100% because I notice if you use the barcode scanner app it doesnt make a shutter noise.
hello all,
Can I do apply this update..?
I ask you because, my phone are only unlocked...I use my phone on Mexico
NOTE: The phone not ROOTED..!!
I waiting your response....
GeoJam3s said:
Does anyone know how this would trouble rooting?
Now how do I root? Can I root? What root method? I have been using the ZedoMax 4.1 root with Odin but I am not sure that this is the best root out there. Would any of these revert the update?
Thanks![/QUOTE}
I'm curious. After you restored an old backup and unrooted/reset, did the update get pushed to your phone again? Here's the easiest way to root
http://forum.xda-developers.com/showthread.php?t=1342728
Click to expand...
Click to collapse
DataHawg said:
GeoJam3s said:
Does anyone know how this would trouble rooting?
Now how do I root? Can I root? What root method? I have been using the ZedoMax 4.1 root with Odin but I am not sure that this is the best root out there. Would any of these revert the update?
Thanks![/QUOTE}
I'm curious. After you restored an old backup and unrooted/reset, did the update get pushed to your phone again? Here's the easiest way to root
http://forum.xda-developers.com/showthread.php?t=1342728
Click to expand...
Click to collapse
Yes. The update pushed to my phone. I didn't know if any of the previous settings would cause my phone to brick, but apparently it worked fine... no problems... flawless root.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
4NDR01D5 said:
Booo 2.3.6/EK02 didnt fix shutter, focus sound now, I still wake the baby up if I take a photo. Is there a Non-Root kill for this that works 100% because I notice if you use the barcode scanner app it doesnt make a shutter noise.
Click to expand...
Click to collapse
theres some app for no shutter sound, it acutally might be called that no shutter cant remember..
If not, just flash a rom that has camera sounds removed?
So, I'm on Blazer ROM and I'm getting the update push. Will it brick me if I update? I seriously don't need that at the moment so its in my best interest to figure that out first before I go ahead.
Did anyone else try to update theirs? I have EK02 and Starburst 1.9.8. I just want to make sure this won't brick my phone or do any damage. I'm away from home for another three weeks and I wanna make sure this update won't make mine a useless piece of crap.
Annoying that root ed people are getting the update push as well...
Does that mean it's tied to your acct?
Should probably expect more of these in the future...I wouldn't install it on a root ed phone...
...
Has anyone on a rooted Epic 4G Touch ran this update? And if so, did it unroot or brick anybody? I'm getting tired of getting the update notification pop-up.. I'm either going to follow the guide to removing it, or run the update, depending on any official word that it won't screw up my customized phone... I certainly don't want to have to redo everything.
Thanks in advance!
I tried to run the update it restarted my phone and it give me a explanation mark with green android icon. wtf does that mean??? I restarted the phone now the update message doesn't even pop up assuming it updated it???
Android version : 2.3.4
Kernel: 2.6.35.7 zedomax
hardware version: d710.10
buildnumber: midnight rom 2.0
I blindly installed the OTA yesterday.
I had Rooted stock version of 2.3.4.
Now I have Rooted 2.3.6.
Looked up information all yesterday and all I could see was LOS fix and system RAM was increased by decreasing the OS requirements (somehow). Some people said this
made their phone perform faster.
Right away I noticed I had to reset all my bluetooth connected devices.
No other problems were noticed. I am still rooted, woohoo.
Just tried installing this on the latest Blazer Rom (not the beta one) and got a error after restarting. It then booted into Team Rogue recovery and I rebooted the phone and now it dosen't ask me for a update. My baseband version is eg30 and kernel is ek02. Don't think I am doing something wrong, if I am can someone tell me
chaosbelow247 said:
Just tried installing this on the latest Blazer Rom (not the beta one) and got a error after restarting. It then booted into Team Rogue recovery and I rebooted the phone and now it dosen't ask me for a update. My baseband version is eg30 and kernel is ek02. Don't think I am doing something wrong, if I am can someone tell me
Click to expand...
Click to collapse
same thing happened to me on my epic 4g touch. No update message yet.
deziking said:
same thing happened to me on my epic 4g touch. No update message yet.
Click to expand...
Click to collapse
Well I think it's a good thing it didn't ask me because I didn't want the update considering I like my ROM. The update only fixes LoS issues and other problems. You can actually find the updated kernel on these forums and flash it to your phone if you have problems with signal otherwise the update really doesn't do much.
You can also flash to Blazer Rom EL13 beta rom and it will improve your data speeds but users have reported slower WiFi speeds. It also gets rid of the update message since its the latest update. ლ(ಠ益ಠლ)
TL;DR: The update is useless unless you have LoS issues.
chaosbelow247 said:
Well I think it's a good thing it didn't ask me because I didn't want the update considering I like my ROM. The update only fixes LoS issues and other problems. You can actually find the updated kernel on these forums and flash it to your phone if you have problems with signal otherwise the update really doesn't do much.
You can also flash to Blazer Rom EL13 beta rom and it will improve your data speeds but users have reported slower WiFi speeds. It also gets rid of the update message since its the latest update. ლ(ಠ益ಠლ)
TL;DR: The update is useless unless you have LoS issues.
Click to expand...
Click to collapse
Sweet thanks for the info I'm going to update the kernel when I get home, I have been having Los issues.
Sent from my SPH-D710 using XDA Premium App
heys guys i couldnt find a thread for this well a updated thread. i just got a software update and im rooted and unlocked and was trying to find a way to disable this feature. please help as i feel ill accidently hit the update now. its getn annoying. i forgot im on a stock rom as well. thanks again any help is appreciated.
*EDIT so i went to root explorer and mounted r/w then went to security and changed otacerts.zip to otacerts.zip.bak im hopping this will work. if anybody has a idea on this let me kmow.
wow a dead thread well thanks for helping. yall will get the update soon. please let me know if i can just flash a custom rom like aopk or cm to fix the ota issue.
Bigc13 said:
wow a dead thread well thanks for helping. yall will get the update soon. please let me know if i can just flash a custom rom like aopk or cm to fix the ota issue.
Click to expand...
Click to collapse
Maybe you've seen this already. http://forum.xda-developers.com/showthread.php?p=45733765
Sent from my LG-LS970 using XDA Premium 4 mobile app
Yes sir I have and I tried that on my wife's phone she got the update and then I tried to go to system the security and changed it but I still get the same msg. I ha Mt got the update yet but I also debloated mine so maybe I deleted sumthing to that effect. So I flashed her to cm10.2 and she doesn't like it. But she hasn't received the update either. So I guess I'll restore hers and tr tthat method again. Thanks tho I'll try again when I get off work
Bigc13 said:
Yes sir I have and I tried that on my wife's phone she got the update and then I tried to go to system the security and changed it but I still get the same msg. I ha Mt got the update yet but I also debloated mine so maybe I deleted sumthing to that effect. So I flashed her to cm10.2 and she doesn't like it. But she hasn't received the update either. So I guess I'll restore hers and tr tthat method again. Thanks tho I'll try again when I get off work
Click to expand...
Click to collapse
I also found this. I'm pretty sure it'll work with ZVB/ZVC. http://forum.xda-developers.com/showthread.php?t=2098477
I know when ZVB ota came out, if you had removed a lot of programs the update would fail and stop giving you the message. Just another option.
engine95 said:
I also found this. I'm pretty sure it'll work with ZVB/ZVC. http://forum.xda-developers.com/showthread.php?t=2098477
I know when ZVB ota came out, if you had removed a lot of programs the update would fail and stop giving you the message. Just another option.
Click to expand...
Click to collapse
I will sure try that and yea I was on ZVB when I debloated but I'll give it a try. Thanks again Ur the most helpful 1 here I'll hot that thanks button when I get off work and to my pc lol
ok guys, i have a question for you. keep in mind that im new to the phone world lol. ok so a bout a month ago i wanted to unroot my phone but for some reason the tar files on sammobile wasnt working right. so i came on here and downloaded what i believed to be the file that i needed to go back to stock. after i used odin and the phone rebooted it automatically notified me that i had a update. after i accepted the update and it rebooted, it again notified me that i have yet another update. so after this happened i noticed that my phone was updated to 4.4.4 kitkat which would be great exept for the fact that it keeps freezing and when i am on wifi i have a problem getting phone calls aswell as text messages. also when i disconnect from wifi i have to restart the phone to get any data back. is there anything that i can do? is it possible to go back to 4.3 or even 4.2.2? any help would be very much appreciated.
hellrazr209 said:
ok guys, i have a question for you. keep in mind that im new to the phone world lol. ok so a bout a month ago i wanted to unroot my phone but for some reason the tar files on sammobile wasnt working right. so i came on here and downloaded what i believed to be the file that i needed to go back to stock. after i used odin and the phone rebooted it automatically notified me that i had a update. after i accepted the update and it rebooted, it again notified me that i have yet another update. so after this happened i noticed that my phone was updated to 4.4.4 kitkat which would be great exept for the fact that it keeps freezing and when i am on wifi i have a problem getting phone calls aswell as text messages. also when i disconnect from wifi i have to restart the phone to get any data back. is there anything that i can do? is it possible to go back to 4.3 or even 4.2.2? any help would be very much appreciated.
Click to expand...
Click to collapse
Hello! Did you make a back up of your phone before you started the update? That would be the easiest way to go back to how it was. If you used Odin and didn't install a recovery like TWRP or Clockwork you may not have done so. I believe you can reload from Odin with an older ROM it will just erase everything you did. There are stock ROMS here at XDA and galaxynote3root.com as well. Let me know it this helps, sorry for your troubles.
5225
Jedidanno said:
Hello! Did you make a back up of your phone before you started the update? That would be the easiest way to go back to how it was. If you used Odin and didn't install a recovery like TWRP or Clockwork you may not have done so. I believe you can reload from Odin with an older ROM it will just erase everything you did. There are stock ROMS here at XDA and galaxynote3root.com as well. Let me know it this helps, sorry for your troubles.
Click to expand...
Click to collapse
Thanks for the reply, so i wont have any problem downgradeing? I think i read somewhere that i could brick my phone. And if it is possible what version am i able to go back to?
Oh and to answer your question, i have never has a custom recovery on this phone and i didnt make a back up.
Can you post a screenshot of your about phone page?
Techniques said:
Can you post a screenshot of your about phone page?
Click to expand...
Click to collapse
is this good
I'm actually surprised that you did get an update to 4.4.4... You could try going back to NF9. The safest route I see that you can take is to install a custom recovery and make a backup before doing this. If you odin NF9 and it doesn't boot then you're kinda screwed because we technically don't have the 4.4.4 update yet, so if anything goes wrong, you can install a recovery again and restore the 4.4.4 backup.
Techniques said:
I'm actually surprised that you did get an update to 4.4.4... You could try going back to NF9. The safest route I see that you can take is to install a custom recovery and make a backup before doing this. If you odin NF9 and it doesn't boot then you're kinda screwed because we technically don't have the 4.4.4 update yet, so if anything goes wrong, you can install a recovery again and restore the 4.4.4 backup.
Click to expand...
Click to collapse
haha i was surprised to, i cant find anyone else that has it with this phone either, i was kinda wondering if i maybe downloaded the wrong file maybe for a different country or carrier. im not sure how to do the hole backup and custom recovery thing.
hellrazr209 said:
haha i was surprised to, i cant find anyone else that has it with this phone either, i was kinda wondering if i maybe downloaded the wrong file maybe for a different country or carrier. im not sure how to do the hole backup and custom recovery thing.
Click to expand...
Click to collapse
You can get the latest TWRP recovery here : http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.8.1.0-hltetmo-4.4.img.tar
Just odin that and after it's done, go into recovery by doing Vol down + Home and do a backup either in your internal or external storage. After that finishes, you can go back in download mode and odin NF9.
ok thanks for all you help man,
hellrazr209 said:
is this good
Click to expand...
Click to collapse
iam surprised as well how did you get the latest tar on tmobile note 3?
chipis said:
iam surprised as well how did you get the latest tar on tmobile note 3?
Click to expand...
Click to collapse
I got it on here, it was a tar for 4.4.2 i believe and after i downloaded it, it said i had a update. After that i had another update lol which brought me to the hell im in now lol 4.4.4
hellrazr209 said:
I got it on here, it was a tar for 4.4.2 i believe and after i downloaded it, it said i had a update. After that i had another update lol which brought me to the hell im in now lol 4.4.4
Click to expand...
Click to collapse
Well i believe if iam right samobile had not release it for tmo yet
chipis said:
Well i believe if iam right samobile had not release it for tmo yet
Click to expand...
Click to collapse
Yeah its not on their website. I have know idea what i got then lol anyway to fine out if i have something i shouldnt?