[Q] Having trouble getting A2SD on Deck 1.2.1 - EVO 4G Q&A, Help & Troubleshooting

Hi and thanks for helping. Right now I'm flipping between various Synergy ROMs and Deck 1.2.1, and when I flash Deck I lose A2SD support. Flashing DarkTremor's A2SD zip in RA 2.3 recovery doesn't seem to work when I'm using Deck (the zip reports a successful flash but nothing actually pops up like when you install the DT A2SD zip on other ROMs).
I've got a 16GB card partitioned exactly as Virus recommends for all Kingdom/Synergy ROMs (2GB partition upgraded to ext3; apologies, I can't find the original post with the explicit instructions). I'm using dtapps2sd-2.7.5.3-beta05-signed.zip and Tiamat 4.06 for a kernel. Any information/guidance would be most appreciated!
--VK

I'm not 100% on this, but you can try flashing Decks GB, then flash DT beta 04..
Here's the link to beta 04
http://forum.xda-developers.com/showthread.php?t=715938
After flashing, open terminal and type
su
a2sd check
If you get no errors your probably good to go
Sent from my PC36100 using Tapatalk

Hi, and thanks for the suggestion. It did seem that for some reason I was using another bum version of DT (I think I got it off the attachments list for a post somewhere; those lists should really have reference links to the posts, but I digress). When I used beta 04 I got the functionality back, but strangely I was getting a lot of Market FCs so I re-did the entire ROM from the beginning. Everything seemed to work, but anything I restored or downloaded disappeared after a reboot. Running "a2sd reinstall" thankfully fixed that issue and everything seems normal again.

I've never seen Dark Tremor pop anything up. It does usually set itself up though. Pull up terminal or adb shell and run ls -l /data. You should see symlinks pointing to the SD card if it's setup. If not, run a2sd reinstall, and it should set things up. If that doesn't work, then yes, you may have an issue.

Related

JP3 Lag Fix- ext3 partition via script = 1610 quadrant

This is early, hacky, and built from the work of the guys on the Vibrant forums: http://forum.xda-developers.com/showthread.php?t=739647
anomalous3 figured out that "there was only one thing running as root that could safely be replaced; the boot logo player. So, all this does is replace the boot logo player with a script that calls userinit.sh from /data/local and then calls the (now renamed) bootlogo player for those of you who want that nifty startup screen"
What this does is allows the phone to mount an ext3 partition on boot so we can have a lag fix on JP3. I'm getting 1610 on quadrant and it's pretty stable. Please someone improve this!! shaunm89 and I just hacked this together from other's work.
Directions:
1.) Create an EXT3 partition on your external SD card of 2gb. It should be the second partition after the fat32 partition
2.) Flash Modaco's pre-rooted JP3 through Odin: http://android.modaco.com/content/s...insecure-boot-clockworkmod-recovery-for-odin/
3.) Boot the phone up. Open market and install Root Explorer (costs $) and Busybox. Update busybox
4.) Download these files: http://www.megaupload.com/?d=ONGUDAIJ
Copy them across to the SD card. Move playlogos1 and playlogosnow to /system/bin. Move userinit.sh to /data/local. Use root explorer to set permissions read (all 3) write (user only) execute (all 3). 0755 for those who know linux. You can use adb to push if you wanna get fancy.
5.) Reboot. Use root explorer to see if /sd-ext exists, and if so, whether /sd-ext/data and /sd-ext/dalvik-cache exist. If so it worked! If not, reboot again and then check.
That's it. Maybe someone can package this into an update.zip, maybe someone can take it and make it more stable and even faster (ext4 for example)
great! hope we could find an easier way
Sent from my GT-I9000
Is it a must to get the pre-rooted version of firmware? However using the original SP3 then root by myself?
On the other hand, I think I will modify your init.rc as I would rather to do all the moving by myself
Great job, hope we can get EXT4 soon.
In step 4, " Move userinit.sh to /local/data" should be data/local. Quadrant benchmark 1700.
seems like the script is calling busybox, but is it necessary to use root explorer. Could one substitute root explorer with adb?
I assume root explorer is just to do things adb can do, but locally on the device instead of attached via USB.
I tried this and it and i can see sd-ext and the subfolders but is this all we need to do?
is /data/data linked to the sdcard?
I am asking because i tried to reboot the phone without the sdcard in it and i can still see all my apps and everything is working fine.
Thoughts?
Also there is an error in section 4 of your instructions. there is no /local/data, it is /data/local.
Also playlogos1 and playlogosnow files needs to be renamed with a capital P for this to work.
No need to install root explorer if you can use adb to push the files. I just wasn't sure how to use adb to push to those directories.
I fixed the other mistake, thanks
This is not ideal but gets the job done. I'm hoping you guys can make it better!
Are you able to download anything from the market after doing this?
My market is just stuck on "starting download" and that's it.
clubtech said:
Are you able to download anything from the market after doing this?
My market is just stuck on "starting download" and that's it.
Click to expand...
Click to collapse
Protected apps don't show but i've been able to get all my other purchased and free apps installed and running fine.
Strange.
I'll flash again and try again.
Yea i don't know.
The market will download some and won't others.
Also my Quadrant test is getting stuck at 3/4 stage of the I/O test so it might be my SDCard which sucks.
I used a 16GB SanDik class 4 card.
clubtech said:
Yea i don't know.
The market will download some and won't others.
Also my Quadrant test is getting stuck at 3/4 stage of the I/O test so it might be my SDCard which sucks.
I used a 16GB SanDik class 4 card.
Click to expand...
Click to collapse
sandisk are one of the best cards you can get, kingston are known to get stuck at this stage, are you sure you don't have a fake sandisk card?
anyway if you leave it running after about 10 minutes quadrant will finish and still give you a massive score of over 1500.. just shows how reliable the quadrant scores are .
does it mean that quadrant is good but speed isnt?
Tried this fix on my JP3 but no luck. I don't get these folders.
Maybe it must be MoDaCo?
If I manually execute the script I get these folders, but after reboot they are gone.
Pretty new to this maybe I'm doing something wrong?
drygmasken said:
Tried this fix on my JP3 but no luck. I don't get these folders.
Maybe it must be MoDaCo?
If I manually execute the script I get these folders, but after reboot they are gone.
Pretty new to this maybe I'm doing something wrong?
Click to expand...
Click to collapse
Ok, did it from scratch today. Format, flashed MoDaCo prerooted JP3 and everything. Stilll I don't get this to work (
Please, any ideas?
Finally got it to run faster with this fix, thanks for sharing!
drygmasken said:
Ok, did it from scratch today. Format, flashed MoDaCo prerooted JP3 and everything. Stilll I don't get this to work (
Please, any ideas?
Click to expand...
Click to collapse
Also happened to me initially. /sd-ext won't show up or if it does, it doesn't contain the correct folders though it is listed when you run 'mount'. Laggy with Quadrant result at 975.
So, went back and reformatted SD w/Fat32 then EXT3, cleared cache/data, re-flashed Modaco's JP3, installed the latest Busybox, copied files per OP and I finally got it working after a couple of re-boots (3, i think). It is running smooth so far w/quadrant 1622. GPS seems to be getting locks on SATs quickly but you still can't get to LBSTest via the keypad. Still can't write to the external sd when mounted/shared to PC.
Also tried JAC's work (see this thread: [KERNEL/RECOVERY] Vibrant EXT2/3/4 with init.d support) since it has the nifty feature allowing user to put startup scripts on boot up. I flashed his kernel but i got stuck on the 'Vibrant' boot screen. anyways, will give it another try later.
titovic said:
Also happened to me initially. /sd-ext won't show up or if it does, it doesn't contain the correct folders though it is listed when you run 'mount'. Laggy with Quadrant result at 975.
So, went back and reformatted SD w/Fat32 then EXT3, cleared cache/data, re-flashed Modaco's JP3, installed the latest Busybox, copied files per OP and I finally got it working after a couple of re-boots (3, i think). It is running smooth so far w/quadrant 1622. GPS seems to be getting locks on SATs quickly but you still can't get to LBSTest via the keypad. Still can't write to the external sd when mounted/shared to PC.
Also tried JAC's work (see this thread: [KERNEL/RECOVERY] Vibrant EXT2/3/4 with init.d support) since it has the nifty feature allowing user to put startup scripts on boot up. I flashed his kernel but i got stuck on the 'Vibrant' boot screen. anyways, will give it another try later.
Click to expand...
Click to collapse
Which method do you use for making the ext3? I made my on my hero using Amon RA could that be a problem?
drygmasken said:
Which method do you use for making the ext3? I made my on my hero using Amon RA could that be a problem?
Click to expand...
Click to collapse
I used GParted Live CD as Paragon fails to format my AData card and sorry but I am not familiar with AMON RA.
1646 thanks, very fast!
Sent from my GT-I9000 using XDA App
Would this procedure work for ext4 partitioned SD Card?

[Script][A2SD]Darktremor 2.7.5.3 Beta 04 [DesireZ] (01/29/2011)

Introducing...
Darktremor Apps2SD 2.7.5.3 Beta 04
Date of Release: January 29, 2011
Download Current Version
Instructions - Change Log - Commands - ROM List - Developer's Guide
Darktremor Apps2SD Fan Page ----
Darktremor Apps2SD Development Group
Are you installing Darktremor Apps2SD on your phone? Here are the instructions to help you: Facebook
Are you a developer wanting to include Darktremor Apps2SD in your latest ROM? Here is the Developer Guide: Facebook
Click to expand...
Click to collapse
Update on Beta 4
It seems I'm getting mixed results with these betas. I'm not sure why this is occurring, some people have been able to get this working right while others have had a hard time with it.
Currently, I'm rebuilding the entire program. This takes a while because I have to figure out how to pack all these options into the program but make it small enough to where it will run correctly.
I will say that some of the beta features are coming back out...one of them is the search for a partition code. I suspect that code may be leading me into issues with certain platforms, so I'm going back to the 2.7.5.2 method of mounting (mmcblk0p2 or mmcblk1p2).
Also, parts of the code will use Busybox Ash (the only code that won't will be starta2sd, which will still use Bash for the time being). The startup code will definitely use Busybox Ash.
Until then, here are the links to the the last two betas and the last official release:
Version 2.7.5.3 Beta 04 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta04-signed.zip
Version 2.7.5.3 Beta 03 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta03-signed.zip
Version 2.7.5.2-1 - http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.2-1-signed.zip
And, if you want past versions, you can view the repository: ftp://dtuser:[email protected] (ignore the smiley face...that's XDA doing that.)
Click to expand...
Click to collapse
Beta 04 took longer than I expected to release. I have done major changes to the code:
1. New commands: convert-ext4 - This will convert your EXT3 partition into EXT4. Just a friendly reminder on this command: Not every rom supports EXT4, so it is possible to go into a boot loop if you switch roms. Use with caution.
2. Reworked convert-ext3 (convert-ext4 gets similar code)...now a flag file is set before the reboot (no conversion is done before the reboot). At load time, the conversion is performed. This takes longer in the reboot process and you may think your phone has locked up...wait about five minutes before doing anything with the phone.
3. Repair is rebuilt...now it uses existing commands to repair the setup (reinstall, remove, cachesd, cachepart, nocache, datasd, nodata). Definitely shrinks the code.
4. Added fix_permissions program to the package. This may help with Superuser issues when using the datasd feature. It is used in reinstall, remove, datasd and nodata.
5. a2sd install is back!!! Both a2sd install and a2sd reinstall do the exact same thing.
6. Dalvik heap code has been shrunk and now creates a file called dalvikheap. Actually, the code has been doing this all along (since about 2.7.5.2, I think), but I never put the code in to use the file.
7. Low Memory Killer code has also been shrunk and uses a file caled dtset_lowmem to set the low memory killer parameter.
8. Replaced Busybox PS function with Toolbox PS. The issue with Busybox PS is that it gives a false reading when I look for android.process.acore (which is the main program when the GUI starts up). If that is present, the program thinks you are trying to run Darktremor without any command line parameters. This was because Busybox would report the process was there when, in reality, it wasn't (validated this when my phone was boot looping.) Toolbox's PS reports the correct setting. This should fix the bootlooping issues some people are experiencing.
9. New commands: usedtbusybox and usedefaultbusybox - these commands may help in diagnosing issues that is may be related to the native Busybox on your rom. a2sd usedtbusybox will use the Busybox that is packaged with Darktremor. a2sd usedefaultbusybox will turn back on the scan behavior of the program introduced in Beta 03.
10. Support for Darktremor Apps2SD version 2.7 and earlier has been discontinued. To upgrade correctly from one of those versions, use version 2.7.5.3 Beta 03b or earlier.
11. Finally fixed stalled boot issues (or at least my tests with several roms says so.)
See the change log for additional details.
You will notice that if the program runs repair and finds a problem, it will correct the issue and reboot. You will see a second reboot when the dalvik-cache clears (this is to fix timing issues with CyanogenMod...I can't control that startup as well as I can other roms). This only happens if repair is ran or you flash a new rom (as repair will realign all data). If you are upgrading from a previous version of Darktremor, you should not see the reboots.
Click to expand...
Click to collapse
This is Darktremor Apps2SD, a multipurpose program that primarily allows a user to execute applications created for the Android OS on their Secure Digital card (with the proper setup...more on that later). But, Darktremor Apps2SD is all about stability. The goal is to be able for all users of the Android OS to be able to take advantage of a method to run their applications from a secure digital card.
But just because the Darktremor Apps2SD is all about stability, doesn't mean it isn't packed with features:
- Move applications (both free and paid) to the Secure Digital card.
- Move Dalvik Cache to run either from your Secure Digital card or from your cache partition and clears the cache on demand.
- Boot Loop Protection: prevents the phone from boot looping in the event the SD card could not be mounted.
- Dalvik JIT for faster performance on Roms which support it.
- User selectable sizes for the Dalvik heap sizes, allowing a user to freely optimize their system.
- Activate a swap partition on your SD card and sets how often the swap partition is utilized.
- Automatically fixes configuration issues.
- Users can check the free space on their SD card and check the installation to make sure all is setup correctly.
- Runs ZipAlign on demand...this makes your programs load faster.
- Built in help system for easy reference of commands.
- All features can also be reversed without repartitioning your Secure Digital card.
- New logging features assists in troubleshooting issues.
- Commands to set the Low Memory Killer feature at boot time. Great for those people who are the "set it and forget it" type.
- And more...
Darktremor Apps2SD is not the same as Froyo Apps2SD. Froyo Apps2SD creates a secure folder on the FAT32 section of your SD card (this is the section that you see when you mount your phone to your computer) and stores the programs there. This is nice as you don't have to do anything special with the phone, but it isn't backwards compatible with older versions of Android (Cupcake, Donut, Eclair) and, because of the way Froyo works, older programs not designed for Froyo will automatically stay on your internal storage (unless you install a program that forces the move to your SD card).
Darktremor Apps2SD takes a different approach. Based on the original CyanogenMod works, Darktremor Apps2SD uses symbolic linking to force Android into moving your applications to the SD card. Because Android will not allow anything to be ran from the FAT32 partition on your SD card (and, in Froyo, it will only allow you to run programs from a special folder), Darktremor utilizes filesystems called EXT2, EXT3 and EXT4. Each one of these filesystems is native to Linux (the operating system running Android), which allows you to run programs from them (same as, say, a computer running Ubuntu). This method is completely compatible with all versions of Android, including Froyo. In fact, you can run both the Darktremor Apps2SD and Froyo Apps2SD at the same time.
Check out the list of Roms that either have Darktremor Apps2SD installed or are compatible with Darktremor Apps2SD. Click on the link labeled ROM List at the top of this message.
What?! Thanks darktremor, used this with my slide, will be testing and update this post asap with feedback.
Just curious though, is this meant for froyo based roms or should it work with gingerbread also?... guess I could test and see. Also do we still need to used the 'a2sd reinstall' and 'a2sd cachesd' commands to install it?
Sent from my T-Mobile G2 using XDA App
will this also work with sense roms?
g1junky said:
will this also work with sense roms?
Click to expand...
Click to collapse
Not sure, that's why we are testing it.
I can't get it to work on CM7 nightly 11 ( That I know of).
Used Clockworkmod to set up the ext partition (which doesn't specify which filesystem so i'm guessing either ext2 or ext3); set partition to 512mb and swap to 0mb.
Card partitioned successfully according to CWM; upon flashing the app2sd.zip the installation goes through all steps and posts that the install was successful even though the little check box by install successful is the only one that is starred. I noticed that during the install the script mounts /system and /data to write to them...not sure if that is affected by GB. I thought I read somewhere that this script was designed to check for ext4.
Hell, idk lol. I nandroided and went for it, these are my findings.
scratch that, there's a part two i missed that involves command line functions in the terminal emulator app. It looks like it's working to me.
Edit2: From what ive moved to /sd-ext so far everything seems to be working. Moved my apps, app data, dalvik cache and /data/data.
So far I havent experienced any data loss when moving /data/data.
There's no reason it shouldn't work with Gingerbread, other than the usual suspect of the rom doesn't launch scripts at boot or doesn't have EXT support.
As for the commands, you shouldn't have to rerun those commands if you are upgrading.
KCRic said:
What?! Thanks darktremor, used this with my slide, will be testing and update this post asap with feedback.
Just curious though, is this meant for froyo based roms or should it work with gingerbread also?... guess I could test and see. Also do we still need to used the 'a2sd reinstall' and 'a2sd cachesd' commands to install it?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Yes, it should. I'm running a Sense UI rom on my Evo and it has 2.7.5.3 Beta 02.
g1junky said:
will this also work with sense roms?
Click to expand...
Click to collapse
I can honestly say that so far everything seems to be working well on my end. Dropped ~100megs of internal space usage and sent it to the sd.
The phone does seem a bit snappier, does this style of app2sd stress the card more than usual?
hmm.
I'm running cm 7 nightly 11, set 512mb, 0mb swap and I think I got everything right. Strangely enough, I keep getting reboots every time i run a command in terminal.
edit: a2sd command*
SWEEET..........
I too can confirm that this works with CM7 Nightly "Gingerbread" sweet, installed the zip file from recovery, QUICK NOTE: Had to mount /system and mount /data in recovery before installing the zip file from sdcard. This is great apps2ext that works with any rom. Now in my titanium back ups it shows three seperate storge locations: internal, SD card and SDCard(a2sd) plus it restored apps I previously had on my ext.2 partition from when I was running Enoms Rom....sweeeeeet.
Also dont forget to run the command in adb shell:
Code:
/system/bin/a2sd cachesd
if you want to move dalvik cache to sd.
UPDATE: internal memory free reads out of 1.37GB Avail. there is 1.28GB FREE and Ive got 77 apps installed right now and about too install a lot more..........
FYI im runnning a 16gb class 10 sd card with a 1024mb ext.2 partition
Most of the code is similar to the previous version. I think the snappiness may be that your SD card is faster than internal storage.
stevencpoynter said:
I can honestly say that so far everything seems to be working well on my end. Dropped ~100megs of internal space usage and sent it to the sd.
The phone does seem a bit snappier, does this style of app2sd stress the card more than usual?
Click to expand...
Click to collapse
Did you type su before you run an a2sd command?
zarskee seven nine said:
I'm running cm 7 nightly 11, set 512mb, 0mb swap and I think I got everything right. Strangely enough, I keep getting reboots every time i run a command in terminal.
edit: a2sd command*
Click to expand...
Click to collapse
Just so everyone knows (may want to add this to the OP you know, so you don't get a million ?'s) these are the commands you HAVE to enter after flashing it in recovery.
Code:
su [ENTER]
cd /system/bin [ENTER]
sh a2sd cachesd [ENTER]
Your phone will reboot and will take a bit to complete - be patient because it's moving all your apps and the dalvik cache.
Notes: Your memory will still drop (not by much) over time because the apps will still store cached memory on the phone. To deal with this use the 'datasd' command to move that info to the sdcard also. Also, use the 'a2sd help' command to find all the functions you can perform with this. If you've used this before then all of this is irrelevant
Was so excited about this , It worked perfectly on CM7 nightly builds but when I went to update the Nightly build from 11 to 12, problems, keep getting reboot, since all my apps including titanium were on EXT, I could not access them, so the modification didn't stick from build to build, had to full data wipe, so I guess I'll be coming back to this when CM7 stable is realeased.
Yah I did. It's a beta on a nightly rom...I'm not surprised that something would be weird. I know it worked sending my dalvik cache to sd for sure, but as far as my apps being reinstalled on sd..im not sure. I followed the directions to the t and i know i didnt skip steps cause i used to use this on my nexus one
joemm said:
Was so excited about this , It worked perfectly on CM7 nightly builds but when I went to update the Nightly build from 11 to 12, problems, keep getting reboot, since all my apps including titanium were on EXT, I could not access them, so the modification didn't stick from build to build, had to full data wipe, so I guess I'll be coming back to this when CM7 stable is realeased.
Click to expand...
Click to collapse
You may have to remove the script in terminal, reinstall the rom than rerun the zip script. I think that should work if you want to keep using this on nightlies
If you change roms (including moving between different nightly builds), you will need to reflash Darktremor.
The only time you don't have to do that is if Darktremor is already added on the rom you are loading. Since CM7 doesn't have Darktremor installed as part of its package, you'll have to reflash each time you change nightly builds.
If you still don't have access to your programs, type a2sd reinstall
My apologies.
zarskee seven nine said:
You may have to remove the script in terminal, reinstall the rom than rerun the zip script. I think that should work if you want to keep using this on nightlies
Click to expand...
Click to collapse
after several days nothing new in this android development section, today i saw something new here, keep your good work, gonna try it when i get home
This is about three months overdue. Unfortunately, job, family and the holiday season got the best of me.
fajarep said:
after several days nothing new in this android development section, today i saw something new here, keep your good work, gonna try it when i get home
Click to expand...
Click to collapse
For me it seems that it doesn't stick. I tried it with cm7, flashed it in recovery and when I booted up to run the commands in terminal they weren't there. No a2sd at all. Guess I could shove all in the ROM prior to flashing and see if that works.

A2SD+ Rom & Force install into internal memory

Hey all. Can't post in the development forum therefore I'll post here.
I have a Leedroid 2.5 A2SD+ rom but this should apply to all A2SD roms.
What I want to do is to force install the software onto the internal memory. I've tried googling and playing around with it myself without any luck. I've ran ADB in recovery and I can't even push the app into "/data/app" since it directs it to "system/sd/app" which is my ext partition.
Is there anyway to do this or I am out of luck ? The reason behind this is that my Handcent is glitching and there is a delay in notifications (vibrate > sound> LED) This started only after I install LeeDroid A2SD+ rom so I have a feeling that my SD card is slowing things down.
Hopefully someone has an idea about this.
Have you tried spareparts, install it, you'll have an option where to install apps, then set it on internal, may work..
I do have Spareparts, it already comes with LeeDroid but I can't see any options that relate to what you've mentioned.
http://forum.xda-developers.com/showthread.php?t=702997
There are 2 SpareParts, use the one in the link. The second option is app2sd, click on it and choose internal.
Hey, I've tried it but it doesnt seem to work.It still installs onto the SDcard. Hmm...i am stumped, cuz there is gotta be a way to force install an app onto internal memory..
hi,
there is some commando would managed this
=> adb shell pm setInstallLocation 1
more info into leedroid wiki =>
http://leedroid.com/bravo-wiki/prevent-any-all-apks-from-installing-to-sd-card
hope this help
Grrr.... Can't figure it out.
Nothing seems to work. I've tried the guide on the Leedroid Wiki with no luck, I've tried Titanium Backup thing that you have mentioned in the other thread. Doesn't work either. The only thing I don't get is how to remount the sd-ext partition, because in the comments of the Leedroid Wiki, that's what made it work for one of the users. I've tried remounting in CWM(ClockWorksMod) but that didn't work.
SpareParts essentially does that command setInstallLocation 1 but in GUI mod. I am lost.
I've tried using that "pm" command to install onto internal flash since there are commands that apparently allow you too but it still installs onto the SDcard. I am just wondering, is there anyway to temproraly disable App2SD script ?
hi,
if you can't get sorted like this, maybe Darktremor app2sd script wil help you, never tried as i m using data++ rom but here is the complete thread... hope for you that will help.
therez a long explication of how it s working and how to apply this on your current rom.
be sure to get root rights
http://forum.xda-developers.com/showthread.php?t=715116
hoep this help
Thanks for your help. I took a different route by pushing the APK onto the /system partition. I had 20mb left so it was enough for an app.
Thanks for all the help))

[Q] Maximize internal storage for Lee-droid 3.0.8.2

HI All,
Hope you can take a look over my setup and help me maximize the space on this phone.
I have rooted, S-off'ed and Followed several guides trying 3 Roms. I like Leedroid best and want to use it going forward. However I keep running out of space after a couple of months and find myself wiping the phone down to start again. despite using the 3.0.8.2 a2sd version of the rom.
I've read posts about this issue suggesting A2SD reintall or terminal emulator fix's but they refer to CM7 and other Roms so I am fearful of trying them out without consulting the experts.
Can anyone see what I'm doing wrong or suggest a new approach I would be willing to wipe everything and start again I.e re-install apps from the market because TB keeps my contact sms etc safe.
I dont know what a2sd leedroid comes packaged with. the "a2sd reinstall" command from terminal is something specific to Dark Tremor a2sd. This can be installed on any rom, so it could be that. This wont break anything if you have any other a2sd solution as these commands wont be programmed into the script.
If it has got Dark tremor, moving dalvik-cache onto sd ext would save space too. the command for that would be "a2sd cachesd"
Hi RootSU, Thanks for your reply. I've downloaded the terminal emulator and tried those commands, doesn't seem to work.
I suppose what I'm trying to Ask is: To run Leedroid what is the optimum configuration to fit the most apps without getting running low message coming up.
Here is the quick sys info which i got too.
LeeDroid ROM does not have the DarkTremor's script - so the a2sd commands won't work. AFAIK, it uses MCRScripts.
There should be an application like that in the ROM with preinstalled scripts.
The last time is used there was and after running the script which moved the dalvik to the SD the problem got solved.
This is the link for the patch:
http://forum.xda-developers.com/showpost.php?p=15732939&postcount=384ton
Yep, just found that add o in the thread:
http://leedroid.ftp.rshost.eu/Bravo_Addons/Move-Dalvik-to-sdext.zip
if you havent done this, it will save a lot of space.
Ok thanks,
I saved that file to SDcard rebooted to recovery and Applied Zip file, It seemed to go well took a while but no errors. Here is a new pic of system info not really much change is there ?
Can you suggest any other checks ?
Not really. may be you already did this? How many apps have you got?
Are you s-off? Maybe try data++ version?
i used to use this rom, now on HD port
can't remember, but i think the A2SD rom already moves the dalvik cache to ext, so flashing that zip won't save anything. you must have a lot of data on internal
to maximise internal storage use the data++ ROM
there is a very good FAQ on how to install it, and more importantly, explains the difference.
since you are already S-OFF, it involves changing hboot to maximise internal memory. then you can move dalvik to ext to have even more...
thanks guys makes sense, Eddie giving this FAQ a go.

[Q] Getting Gapps on [JUNE 17][4.2.2] PARANOIDANDROID v3.60 | HALO

A first post here, please be gentle with me, and huge thanks to everyone who has made posting here unnecessary until now.
After a long time using CynogenMod 7.1 on my Desire, when I came to switching SIMs on it, I decided to look for a new ROM too because I was having a problem with shortage of app space and I was missing a few features I have become used to on JellyBean.
A look at the options found the one in the title by WoH (development forum link). It separates out the ROM and the Google Apps. I can install the ROM, and I like it a lot. I can't get the Google Apps to install.
Tried: flashing the zip file at http://woh-roms.weebly.com/gapps.html via the recovery menu, and installing a2sd. It has the right MD5 and appears to go OK, but the apps don't appear when the phone is rebooted, or appear in the list of things moved by a2sd. I have made repeated attempts, both with wiping user data before and afterwards, and doing it before rebooting after installing the ROM and after an initial boot with it, all without success.
Tried: reading the instructions there. However I don't have adb installed and because I don't have Google Play, I can't install a file manager that unzips files (the one in the ROM doesn't appear to - no unzip option is given).
Tried: installing the ROM mentioned in the development subforum thread by timvdlinde which does have Google Play. That works, but I am not so keen on the ROM itself. This may be incredibly shallow, but I liked WoH's use of the Nexus boot animation, and the timvdlinde ROM has the Nova launcher which I am not interested in.
The phone: an unlocked, rooted, AMOLED GSM Desire. The recovery is the Clockworkmod ROM Manager one. I don't remember ever changing the hboot settings. There is a sizeable ext4 partition on the SD card and it is being used by a2sd.
lovingboth said:
A first post here, please be gentle with me, and huge thanks to everyone who has made posting here unnecessary until now.
After a long time using CynogenMod 7.1 on my Desire, when I came to switching SIMs on it, I decided to look for a new ROM too because I was having a problem with shortage of app space and I was missing a few features I have become used to on JellyBean.
A look at the options found the one in the title by WoH (development forum link). It separates out the ROM and the Google Apps. I can install the ROM, and I like it a lot. I can't get the Google Apps to install.
Tried: flashing the zip file at http://woh-roms.weebly.com/gapps.html via the recovery menu, and installing a2sd. It has the right MD5 and appears to go OK, but the apps don't appear when the phone is rebooted, or appear in the list of things moved by a2sd. I have made repeated attempts, both with wiping user data before and afterwards, and doing it before rebooting after installing the ROM and after an initial boot with it, all without success.
Tried: reading the instructions there. However I don't have adb installed and because I don't have Google Play, I can't install a file manager that unzips files (the one in the ROM doesn't appear to - no unzip option is given).
Tried: installing the ROM mentioned in the development subforum thread by timvdlinde which does have Google Play. That works, but I am not so keen on the ROM itself. This may be incredibly shallow, but I liked WoH's use of the Nexus boot animation, and the timvdlinde ROM has the Nova launcher which I am not interested in.
The phone: an unlocked, rooted, AMOLED GSM Desire. The recovery is the Clockworkmod ROM Manager one. I don't remember ever changing the hboot settings. There is a sizeable ext4 partition on the SD card and it is being used by a2sd.
Click to expand...
Click to collapse
Repartition your sd-card by using the partitioning guide in my sig.
onknope what
abaaaabbbb63 said:
Repartition your sd-card by using the partitioning guide in my sig.
Click to expand...
Click to collapse
Thanks, but I did that before starting this. I used gparted, ending up with a large FAT32 partition, followed by a smaller ext4 and finally a small swap.
lovingboth said:
Thanks, but I did that before starting this. I used gparted, ending up with a large FAT32 partition, followed by a smaller ext4 and finally a small swap.
Click to expand...
Click to collapse
Theres no need for a swap partition. If you are using PA it will just act as a waste of space, since the rom doesnt utilize it in any way.
Try doing a full wipe and reflash the rom. Then flash these gapps. I can guarantee those work, as i use the same rom with those gapps and everything is fine. After flashing run the a2sd script through terminal.
chromium96 said:
Try doing a full wipe and reflash the rom. Then flash these gapps. I can guarantee those work, as i use the same rom with those gapps and everything is fine. After flashing run the a2sd script through terminal.
Click to expand...
Click to collapse
To quote Napoleon Wilson, you can't argue with a confident man even if that's the file I've been trying - same source, same MD5
OK, I'm about to give it another go.
(And apologies if you don't identify as a man!)
lovingboth said:
To quote Napoleon Wilson, you can't argue with a confident man even if that's the file I've been trying - same source, same MD5
OK, I'm about to give it another go.
(And apologies if you don't identify as a man!)
Click to expand...
Click to collapse
Lol, weird. Im on the same rom and used the same gapps. Everything worked fine.
chromium96 said:
Lol, weird. Im on the same rom and used the same gapps. Everything worked fine.
Click to expand...
Click to collapse
Not for me. I took some photos of the process, which I can put somewhere, but it was...
Repartition the SD card
Boot into recovery
Wipe data
Wipe cache
Install ROM.zip (using the one downloaded from the right place, no reported problems)
Install Gapps.zip (ditto)
Reboot
Notice that the Google apps aren't there
Do the su / mount / a2sd install anyway
Reboot (through saying yes to the third question)
Notice that the progress of the move to the ext4 partition says its moving 59 items, none of which are Google apps
Confirm that the Google apps still aren't there
I'm about to try again with another SD card on the basis of 'why not'
lovingboth said:
Not for me. I took some photos of the process, which I can put somewhere, but it was...
Repartition the SD card
Boot into recovery
Wipe data
Wipe cache
Install ROM.zip (using the one downloaded from the right place, no reported problems)
Install Gapps.zip (ditto)
Reboot
Notice that the Google apps aren't there
Do the su / mount / a2sd install anyway
Reboot (through saying yes to the third question)
Notice that the progress of the move to the ext4 partition says its moving 59 items, none of which are Google apps
Confirm that the Google apps still aren't there
I'm about to try again with another SD card on the basis of 'why not'
Click to expand...
Click to collapse
Go to system/app. Are the google apps installed? What permissions do they have?
abaaaabbbb63 said:
Go to system/app. Are the google apps installed? What permissions do they have?
Click to expand...
Click to collapse
Ah, no they're not.
About sixty are, owned by root, with rw (owner) and r (group and global) permissions.
I am being tempted to bite the bullet, install the ADK on something and try the adb method.
What about /sd-ext/gapps/system/app. Anything there?
chromium96 said:
What about /sd-ext/gapps/system/app. Anything there?
Click to expand...
Click to collapse
Yep, they are there, with what I presume are the right permissions: as above, owned by root, rw-r-r.
Doing some more nosing around, and looking at the alternative installation instructions on woh-roms.weebly.com/gapps.html
$ adb shell ls /sd-ext/gapps/system
app etc framework lib usr
Click to expand...
Click to collapse
Yes, doing
ls /sd-ext/gapps/system
produces that.
# enable extgapps (quotes needed)
$ adb shell "echo x > /sd-ext/gapps/.extgapps"
# gapps dir should look like this (if .extgapps doesnt exist the init script wont run)
$ adb shell ls -a /sd-ext/gapps/
.extgapps system
Click to expand...
Click to collapse
Yes, doing
ls -a /sd-ext/gapps/
produces that.
.extgapps is a zero byte file, rather than one byte containing 'x' as there, but the root explorer instructions would produce a zero byte file, so presumably a) there's no touch command and b) it's the presence of the file that's important, not what it contains.
BUT...
... if I do
logcat -C
(after doing logcat -c, going oops, rebooting, and getting it right )
then the lines that are supposed to be there aren't.
I'll get the email working, email the output to myself and stick it in a pastebin or similar.
pastebin.com/Qtrps3A8 has the whole thing.
At the start, various links are possibly not set up:
I/run-parts( 75): ln: /system/etc/permissions/com.google.android.maps.xml: Out of memory
I/extgapps( 155): Created /system/etc/permissions/com.google.android.maps.xml
Click to expand...
Click to collapse
is just one example, then later
D/AlarmScheduler( 1300): No events found starting within 1 week.
I/Goo Parser( 839): GAPPS: No file, skipping item 0
I/Goo Parser( 839): GAPPS URL: http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.2-20130702-signed.zip
I/AlarmReceiver( 839): gooVer: 3601
Click to expand...
Click to collapse
.. so what file is it looking for, and is this down to trying to do things with the card before it is ready?
What has changed:
The search 'app' has gone from the list - I can see from the logs that it is supposed to be replaced, but here it's just missing.
The browser is now very like Chrome... and I don't remember that being the case.

Categories

Resources