Last month I bought a brand new HTC DHD. Now the camera ain't working. Nor the camcorder. I've already tried factory reset and all that. But its stil not working out, can anybody tell me this issue? I will be very thankful if anybody can help me with it. I tried everything, take sim out/sd card out etc. Nothing seems to working.
I just see the black screen whenever i open camera or camcorder.
I will appriciate any help thanks.
Bump?? anybody help me please
Coolahmed said:
Bump?? anybody help me please
Click to expand...
Click to collapse
i just had this problem on my DHD
had to bring it to the service centre.
they replaced the flex cable.
its a hardware fault.
nothing you can do.
Related
Hi all,
I tried doing a search on this before posting this thread. No luck. I just got my TP2 on sunday. I let it charge and flashed HardSPL and a few roms. I noticed my phone would turn completely off when I open and close the screen. At first, I thought it was the display turning off to save power, but the phone is actually turning completely off and I need to hit the power button and boot it back up again. Is this a setting I need to change? Or could there be something wrong with my phone? I also tried going back to the stock rom to eliminate that as a cause and the same thing happens.
Any help is appreciated.
I have posted an almost similar question here with no reply.
http://forum.xda-developers.com/showthread.php?t=553378
Not sure what the problem is. In my case the solution is not to close the keyboard when OneNote Mobile is still open!
My colleague is having the same prob, from what he is experiencing, i would suggest a hardware fault, probably just a loose ribbon cable... but best send it back to HTC to avoid voiding your warranty
palatkik said:
I have posted an almost similar question here with no reply.
http://forum.xda-developers.com/showthread.php?t=553378
Not sure what the problem is. In my case the solution is not to close the keyboard when OneNote Mobile is still open!
Click to expand...
Click to collapse
I don't OneNote is my problem. Since I don't use it.
rosebud said:
My colleague is having the same prob, from what he is experiencing, i would suggest a hardware fault, probably just a loose ribbon cable... but best send it back to HTC to avoid voiding your warranty
Click to expand...
Click to collapse
I guess it's time to give TMO a call. Just need to flash everything back to stock.
Thanks for the suggestions guys. I was hoping to avoid having to send it back, but i might as well.
Albaholic said:
Hi all,
I tried doing a search on this before posting this thread. No luck. I just got my TP2 on sunday. I let it charge and flashed HardSPL and a few roms. I noticed my phone would turn completely off when I open and close the screen. At first, I thought it was the display turning off to save power, but the phone is actually turning completely off and I need to hit the power button and boot it back up again. Is this a setting I need to change? Or could there be something wrong with my phone? I also tried going back to the stock rom to eliminate that as a cause and the same thing happens.
Any help is appreciated.
Click to expand...
Click to collapse
Hi,
I had this issue to and send the phone in for repair. The said that it was a problem with the mainboard - replaced it and send it back. It now works perfect.
REMEMBER!!! If you want to send the TP2 in for repair you must reflash the SPL back to the original one, I think it is 0.79.0000 (see http://forum.xda-developers.com/showthread.php?t=550131 for how to restore to the original HardSPL)
discoverd the same issue, happened to me about a week ago for a few times, when i slide in/out the keyboard. It just habbend about 4 times, but didn't happend again since this time ... i will have a eye on it...
Same here. The screen turns off completely but the phone actually works and I can receive or place calls. Called the HTC support and they advised to try if a hard reset will fix it before sending the phone in. The tricky part here is that this issue can not be recreated easy in their service as it happens randomly with me (sometimes it works fine for days). I am still trying to find out what causes this issue on first place. I think it started right after I installed IGO 8 and changed some power settings in the ini file but it kept doing this after I removed it. I also tried to disable the light sensor (the one that turns the screen off when you place the handset to your ear during a call) because it looks exactly like this - screen turns off but the phone works. So, I will give it another week and I will try the hard reset.
What roms do you guys have this issue with? I am using the stock T-Mobile US with HardSPL.
wejergang said:
Hi,
I had this issue to and send the phone in for repair. The said that it was a problem with the mainboard - replaced it and send it back. It now works perfect.
REMEMBER!!! If you want to send the TP2 in for repair you must reflash the SPL back to the original one, I think it is 0.79.0000 (see http://forum.xda-developers.com/showthread.php?t=550131 for how to restore to the original HardSPL)
Click to expand...
Click to collapse
Did they replace the entire phone or just the mainboard?
ma6inista said:
Same here. The screen turns off completely but the phone actually works and I can receive or place calls. Called the HTC support and they advised to try if a hard reset will fix it before sending the phone in. The tricky part here is that this issue can not be recreated easy in their service as it happens randomly with me (sometimes it works fine for days). I am still trying to find out what causes this issue on first place. I think it started right after I installed IGO 8 and changed some power settings in the ini file but it kept doing this after I removed it. I also tried to disable the light sensor (the one that turns the screen off when you place the handset to your ear during a call) because it looks exactly like this - screen turns off but the phone works. So, I will give it another week and I will try the hard reset.
What roms do you guys have this issue with? I am using the stock T-Mobile US with HardSPL.
Click to expand...
Click to collapse
Did you ever resolve your issue? i ask because I am having he same problem on a Sprint Touch Pro 2
coppertop24 said:
Did you ever resolve your issue? i ask because I am having he same problem on a Sprint Touch Pro 2
Click to expand...
Click to collapse
Sorry, forgot to update this thread. I ended up getting a replacement from TMO. I am much happier now that my phone doesn't turn off whenever I close the screen. Get a replacement while you can and ask them nicely if they can overnight it to you. I did.
Actually, this was a software problem in my case - I did the hard reset 2 weeks ago and since then I have not experienced the issue. I am going to start installing my previous programs one by one to find out what caused the problem.
Same
I have the same problem,
The hard reset solve the problem?
please heeeeelp
Greetings to all
This is my first post and I hope to be putting it in the right place.
I had a problem with my Lumia 900. After trying to update the firmware and not be successful, a dialog appeared asking if I wanted to format a device, by mistake I clicked "yes". after that, my phone did not turn on anymore.
I have looked everywhere but it seems that nobody else has had this problem.
My phone does not work anymore, it was my fault, I know.
I have tried everything and nothing seems to work. I hope you can guide me on what I can do.
Greetings and thanks in advance.
Sarge020 said:
Greetings to all
This is my first post and I hope to be putting it in the right place.
I had a problem with my Lumia 900. After trying to update the firmware and not be successful, a dialog appeared asking if I wanted to format a device, by mistake I clicked "yes". after that, my phone did not turn on anymore.
I have looked everywhere but it seems that nobody else has had this problem.
My phone does not work anymore, it was my fault, I know.
I have tried everything and nothing seems to work. I hope you can guide me on what I can do.
Greetings and thanks in advance.
Click to expand...
Click to collapse
When the update completed/failed...how much battery did you have? and when you try to turn on the phone...how far does it get? white screen? Nokia logo? ...if you don't even get the power on vibrate ...plug your phone in the power for a few minutes (5-20) and unplug..try to turn on phone again...once you see the Nokia logo...plug in the power again. I suspect a power/battery related problem but I am not sure...give it a shot.
ramanan86 said:
When the update completed/failed...how much battery did you have? and when you try to turn on the phone...how far does it get? white screen? Nokia logo? ...if you don't even get the power on vibrate ...plug your phone in the power for a few minutes (5-20) and unplug..try to turn on phone again...once you see the Nokia logo...plug in the power again. I suspect a power/battery related problem but I am not sure...give it a shot.
Click to expand...
Click to collapse
Thanks for answer me.
When the problem occurred battery was almost complete.
When I try to turn on the phone nothing happens, does not vibrate or turn on the screen.
I read somewhere that I should not have formatted the drive that appeared when I wanted to try to flash phone, but unfortunately I read it too late.
If you need to know more, just tell me. I hope you can help me to recover my phone.
Thank you.
I am guessing you didn't update with Zune then? To me format says it all, I think you have wiped the drive completely, Maybe a good read of this may help. http://forum.xda-developers.com/showthread.php?t=1605144 :fingers-crossed:
AndyFZ1S said:
I am guessing you didn't update with Zune then? To me format says it all, I think you have wiped the drive completely, Maybe a good read of this may help. http://forum.xda-developers.com/showthread.php?t=1605144 :fingers-crossed:
Click to expand...
Click to collapse
In facts, that is what I did.. So, I understand.. My phone is dead.
Tank you for your help.
Someone else can give me some help?
Please tell me what I can do.
Greetings.
Sarge020 said:
Someone else can give me some help?
Please tell me what I can do.
Greetings.
Click to expand...
Click to collapse
There is nothing you can do except send the Phone to Nokia.
Your Lumia 900 seems to be one of the lucky few to have a qualcomm bootloader, Which you have just wiped by formatting it. Without the bootloader the phone is essentially a brick.
You cannot recover this without sending the phone to your nearest Nokia Service Center.
wilsey said:
There is nothing you can do except send the Phone to Nokia.
Your Lumia 900 seems to be one of the lucky few to have a qualcomm bootloader, Which you have just wiped by formatting it. Without the bootloader the phone is essentially a brick.
You cannot recover this without sending the phone to your nearest Nokia Service Center.
Click to expand...
Click to collapse
Thanks for your help.
#Request Close
As I understood, You tried out to flash your lum in DEAD MODE, right? If so, the only ways are to flash it with special programmer via tech socket or send it to Nokia.
I used the nokia care suite but have not found the option "dead mode".
It just does not appear. I only see the option to update the phone.
Hi there, Lumia 900 its an amazing phone l, used to have iOS and been and Android User which is a pain in the ass crashy, there aren't plenty apps but the ones out there are really good, the design on this phone its incredible and feels so good
Audio quality its amazing using regular headphones and others Bluetooth its solid for audio
Battery life its incredible! Just like the official page said its all day long battery
The cons, camera photos are not what any Nokia user is expected to be, maybe so update will fix it
Marketplace not so diversified
Can't use the phone with my car audio via USB sighs* having a 1500us$ set in my car and using the regular 3.5mm auxiliar input its a shame
Sent from my Lumia 900 using Board Express
Try to stay on topic please. Nobody asked for a review of the terminal.
Sarge020 said:
Greetings to all
This is my first post and I hope to be putting it in the right place.
I had a problem with my Lumia 900. After trying to update the firmware and not be successful, a dialog appeared asking if I wanted to format a device, by mistake I clicked "yes". after that, my phone did not turn on anymore.
I have looked everywhere but it seems that nobody else has had this problem.
My phone does not work anymore, it was my fault, I know.
I have tried everything and nothing seems to work. I hope you can guide me on what I can do.
Greetings and thanks in advance.
Click to expand...
Click to collapse
Hi theses guyes can fix it JTAG
http://www.ebay.co.uk/itm/Boot-Repa...K_Replacement_Parts_Tools&hash=item416ea4e9be
yavar said:
Hi theses guyes can fix it JTAG
http://www.ebay.co.uk/itm/Boot-Repa...K_Replacement_Parts_Tools&hash=item416ea4e9be
Click to expand...
Click to collapse
That is in London!
Im from Mexico =(
sooo.... about a month ago my phone stopped working just booted to the Sony Ericson screen i have not warranty so it thought id have a look in to this . first thing i did was connect it to the computer this allowed the phone to boot normally but the touch screen wouldn't work but as soon as the usb was disconnected it would reset and get stuck at the logo again. so i turned it off and left it for 24 hours when i tried it again the screen boots normally but the touch screen isnt working i can navigate with the joypad tho. i have done a factory reset and updates etc still no luck so i have tried replacing the digitizer still nothing .
so basically at the moment i cant get the touch screen to work any ideas
thanks for any responses
flash a new firmware with flashtool that mite sort your touchscreen/digitizer
Shaun27 said:
flash a new firmware with flashtool that mite sort your touchscreen/digitizer
Click to expand...
Click to collapse
i have been thinking about this but i didn't see how this would work but ill try anything at this point
thanks
any luck?
ap1927 said:
i have been thinking about this but i didn't see how this would work but ill try anything at this point
thanks
Click to expand...
Click to collapse
It might work because the coding for the touchscreen is in the firmware
sent from my Sony Ericsson Xperia Play™(r800x) Running Slimbean 3.0 using Tapatalk 2™
I hope you see this
ap1927 said:
i have been thinking about this but i didn't see how this would work but ill try anything at this point
thanks
Click to expand...
Click to collapse
Hey did you try this? I'm trying to resurrect my R800i but I seem to have the same problem with my touchscreen not working. I tried the old cracked touchscreen digitizer which was working before I replaced it with this current one but that did not work. I even changed the main flex cable ribbon last night with a new. That just fixed the screen scrambling sometimes and the accelerometer issue but did not fix the touchscreen issue.
If anyone else can help also I'd really appreciate it. I may just go ahead and back up the phone and game data especially then flash a new ROM.
Hello. I have a problem if anyone can help me? I was updating the phone but stopped because there was not enough battery(so battery finished), and since then it is not turned on. So it does not show anything, and when I want to charge the battery, no icons appear. Can you see the video?
Is there any solution to that? Thanks...
VIDEO: https://youtu.be/LsWRF0p1384
Mar1nc3 said:
Hello. I have a problem if anyone can help me? I was updating the phone but stopped because there was not enough battery(so battery finished), and since then it is not turned on. So it does not show anything, and when I want to charge the battery, no icons appear. Can you see the video?
Is there any solution to that? Thanks...
VIDEO: https://youtu.be/LsWRF0p1384
Click to expand...
Click to collapse
I'm sorry I haven't responded yet to your response after my post here, but your phone is probably hard bricked.
I may be wrong, and for your sake I hope someone else has a solution for you, but I think your M8 is dead now. Get a new phone or send it for repairs (it'll need a new motherboard)
Hey there,
I've reveived my device back from repair, but bill was to high for me to repair so they've returned with factory settings. I need to setup my phone but they ask @ first step to open op the phone.. Can open up but my big screen is dead.. So can't do anything. Does anyone know how to fix this issue?
Really big thanks when someone can help me..
Best regards,
Teun
i have the same answer, could anyone support please?