[Q] Not loading any ROM - HD2 Android NAND Development

I've been using BOYPPC V29 for a while now and wanted to upgrade, from that I've wiped data/factory reset and cache partition, then installed the zip via CWR. After rebooting I had the "NAND kernel open failed". I've done Task 29, new partition, format, new magldr, new recovery install. Still nothing. I've tried the Pyramid 3D sense 3, changed the recovery to 250 and install. It past magldr but looped inside the animation logo. I'm all out of ideas and would appreciate any help. Thank you!

Why is this forum called nand developing?? and theres another forum called HD2 Android Q&A and General....I wonder which one i should pick..................................................................................................................
Come on...Its really simple if you are building a rom and you want to post here if you want to ask a question then HD2 Android Q&A and General.

moav said:
I've been using BOYPPC V29 for a while now and wanted to upgrade, from that I've wiped data/factory reset and cache partition, then installed the zip via CWR. After rebooting I had the "NAND kernel open failed". I've done Task 29, new partition, format, new magldr, new recovery install. Still nothing. I've tried the Pyramid 3D sense 3, changed the recovery to 250 and install. It past magldr but looped inside the animation logo. I'm all out of ideas and would appreciate any help. Thank you!
Click to expand...
Click to collapse
Because you use wrong version, check your version you downloaded is for MAGLDR or cLK?
For Pyramid build, you need ext partition before flash Rom
Sent from my HTC HD2 using XDA App

Thank you langthang, and sorry for posting in the wrong place, was not intentionally

Related

[Q] Reflash problem after flashing Cyanogen

Hi all !
Yesterday I wanted to try Cyanogen on my Desire, an I did so with a nightly build.
I just wanted to test it : I'm actually so much Sense-addicted ^^"
But, when I tried to flash my regular RCMixS v06, it didn't work, I was stuck on HTC Logo. Then, I tried to flash Modaco's update.zip file wich I used to root my phone, but, again, it didn't work. Now I'm stuck with a "onlyCM" Desire, which is pretty inconvenient :s
I'm asking you this question : what can I do?
alex83fr said:
Hi all !
Yesterday I wanted to try Cyanogen on my Desire, an I did so with a nightly build.
I just wanted to test it : I'm actually so much Sense-addicted ^^"
But, when I tried to flash my regular RCMixS v06, it didn't work, I was stuck on HTC Logo. Then, I tried to flash Modaco's update.zip file wich I used to root my phone, but, again, it didn't work. Now I'm stuck with a "onlyCM" Desire, which is pretty inconvenient :s
I'm asking you this question : what can I do?
Click to expand...
Click to collapse
Hi,
Did you check to make sure you had a compatible radio version?
Also, I would suggest clear Dalvik Cache and Wipe.
let me know how it goes
Do a full wipe:
Go into recovery - mounts and storage - format boot - format system - format data - format cache - then format sd-ext if you have it then exit that menu and goto advance and do a wipe on Dalvik cache
this is old style full wipe, works for me every time.
Hope you come right.
EDIT: After full wipe install ROm of choice..
Thanks Grobiedeb, it has worked

Noob here, needing help about his rooted Desire

HI
well I rooted my desire using the Full update Guide for the HTC desire (GSM) on the cyanogenmod wiki site.
that installed fine, after a while i decided to download and flash one of LEEDroids ROMS
the installation went fine, but when it started to boot up the sequence kept on repeating.
not knowing what was happening, I went to the recovery memory and used the wipe option.
Eventually I found the restore option, and bought back the cyanogenmod rom.
I have tried many other ROMS and the result is the same, the boot up sequence keeps on repeating...
NEED HELP !!!
yhq92 said:
HI
well I rooted my desire using the Full update Guide for the HTC desire (GSM) on the cyanogenmod wiki site.
that installed fine, after a while i decided to download and flash one of LEEDroids ROMS
the installation went fine, but when it started to boot up the sequence kept on repeating.
not knowing what was happening, I went to the recovery memory and used the wipe option.
Eventually I found the restore option, and bought back the cyanogenmod rom.
I have tried many other ROMS and the result is the same, the boot up sequence keeps on repeating...
NEED HELP !!!
Click to expand...
Click to collapse
Follow the link in my sig for the newbie's guide. It explains everything with videos.
Pipusz said:
Follow the link in my sig for the newbie's guide. It explains everything with videos.
Click to expand...
Click to collapse
eerr, what link? LOL
make sure to wipe dalvic cache (from advanced options) and format everything i.e. boot, system, userdata, cache and sd-ext (from mounts and storage) (apart from sdcard!!!!!) (IF you're using clockworkmod recovery), then proceed to install a new ROM.
bortak said:
eerr, what link? LOL
make sure to wipe dalvic cache (from advanced options) and format everything i.e. boot, system, userdata, cache and sd-ext (from mounts and storage) (apart from sdcard!!!!!) (IF you're using clockworkmod recovery), then proceed to install a new ROM.
Click to expand...
Click to collapse
I have 5 links in my sig and I don't think they are hidden...
Thnx
Does anyone have a good ROM to recommend? Id prefer one with. HTC sense 3.0
The first ROM I used was Android Revolution. My wife is still using it. She can't live without sense. Search for it on here.
--
Phone: HTC Inspire 4G
ROM: Cyanogen(mod) 7 Nightly
Launcher: Zeam
Keyboard: Swype
App: Tapatalk
Hi yhq92,
i followed this link and found it was very straight forward, also has a few of linkslovesandroids fav's, i chose Robo's Rcmix s, becomes very addictive now want to swap it again lol
http://forum.xda-developers.com/showthread.php?t=1016084
bortak said:
eerr, what link? LOL
make sure to wipe dalvic cache (from advanced options) and format everything i.e. boot, system, userdata, cache and sd-ext (from mounts and storage) (apart from sdcard!!!!!) (IF you're using clockworkmod recovery), then proceed to install a new ROM.
Click to expand...
Click to collapse
yeahh so I did that then installed the RCMixHD it finishes booting but now the screens stuck on this ( see attached image)
HELP
You have to be patient on first boot, it can take 10-15 minutes before it progresses beyond that stage.
Or you failed repartitioning sd card.
Do you have 1gb+ ext3/4 partition?
Sent from my HTC Desire using XDA App
Yeah first boot took ages for me to the point I was gonna unplug, glad I didn't, not sure if you get the notifications bar on boot though so think something might not be right! I'd restore and try again, like K3lcior said check partitioned correctly, I kept watching the video's on linkslovesandroids link until I had it in my head,
Right, I'll. Have to check that.
Thnx for the advise

[Q] Stuck in HTC boot screen after patching rmk40 superuser

Incredible 2 won't go past the htc boot screen that is all white. Does it take a while to install or is there a problem. I cleared cache and dalvik cache. then a second time i even factory reset it. I don't know what to do. Please help.
jerham2010 said:
Incredible 2 won't go past the htc boot screen that is all white. Does it take a while to install or is there a problem. I cleared cache and dalvik cache. then a second time i even factory reset it. I don't know what to do. Please help.
Click to expand...
Click to collapse
May need a little more info. I'm assuming you have cwm since you cleared caches. If so, just clear caches ad data again, and flash your custom rom of choice from sd card. Yes, it takes a little while.
Try to pull the battery.
If not just flash a new stock ROM.
Just go into recovery and flash a custom rom it will be rooted for you. The rmk patch did the same to me so i loaded a rom om the sd booted into recovery from hboot and flashed a rom
Sent from my Incredible 2 using xda premium
The problem was that i used rmk40 zip file and it had the froyo firmware instead of the gingerbread firmware. I flashed the gingerbread firmware and it fixed it. Thanks though guys.

<PLEASE HELP> I Can't install any ROM on my Wildfire

Hi, thanks for reading..
I have a htc wildfire phone.
I S-Off-ed it with revolutionary, and also flashed Clockwork 3.0.0.6 on it.
Than I wiped cache (darvik also) and system , and tried to install cym 7 from [install zip from sd card]
as progress goes through, phone freezes or restarts and only green HTC logo appears on the screen, without sound and message (quietly brilliant).
It happens on all rom-s i've tried, nightly ones and cym 6.0 also.
Could you please help me to fix my phone?
Did you do a full wipe?
If you just wipe the cache partitions, the ROM will bootloop.
nejc121 said:
Did you do a full wipe?
If you just wipe the cache partitions, the ROM will bootloop.
Click to expand...
Click to collapse
He means data, dalvik cache and cache. Do those three wipes and reinstall the zip.
Sent from my HTC Wildfire using xda premium
Thanks guys for replay.
I wiped data, dalvik cache and cache.
Than reinstalled zip (cym 6.0), the progress bar went nearly complete, than it freezed, rebooted and booted into clockwork directly.
than i clicked on [reboot system now], it rebooted and is freezed on HTC green logo without animation and sound.
Can i do anything else? or can I install htc sense rom again? (note that I had a backup and when I click a restore, it does restore but still freezes in middle process and no effect is given on phone)
Most Sense ROMs will require a 2.5 recovery. (Use the .zip I attached, it'll give you a temporary recovery once you flash it).
I know that Rempuzzle doesn't require 2.5 recovery tho. Have you tried re-installing the CM7 .zip? or re-downloading and re-installing?
Yesterday, I had exactly the same problem like you. The problem was something with the recovery system. I flashed it again and since then, it works.
ok guys,
I've updated clockwork with update.zip, it appeared blue clockwork 2.5, I wiped everything and started installation over. no ROMs worked (cym 7, cym 6, and latest nightly cyms, HCDR.ROM also).
I think downgrading on 2.5 is kind of reflash too. note that when I reboot recovery it is still orange 3.0.0.6 then until I update it again with update1.zip
Still no result, please help if you have any more ideas.
Flash a complete new recovery, for example with the PC49IMG.zip method..
Clockworkmod recovery 5.0.2.0 has the blue text.
Clockworkmod recovery 2.5.0.7 which you need to flash older roms has green text.
The Orange one is clockwork 3.x.x.x which atm is your main recovery installed in the phone, the update zip gives a temporary recovery which will disappear after rebooting, I'm not quite sure where your going wrong but just try this if you have a cm7 Rom on your SD card.
Power off the phone and then boot into recovery, volume down and power to get hboot and then select recovery, (sorry for the noob instructions, I just want to make sure your doing it correctly) when the Orange clockwork loads up first select wipe data/factory reset and then wipe cache, after that scroll down to advanced and select wipe dalvik cache from in that menu, then go back and choose install from zip/choose zip find your cm7 Rom and select it after its done its thing reboot from main menu.
Cm7 should install fine from clockwork 3.x+ and then if you want to install an older rom like cm6 open Rom manager flash clockwork 2.5.0.7 (also temporary) and reboot into it then do the same wipes and flash cm6.
Sent from my HTC Wildfire using xda premium
3RMD said:
Flash a complete new recovery, for example with the PC49IMG.zip method..
Click to expand...
Click to collapse
Just saying that will probably confuse the guy even more, try explaining what PC49IMG is? Or at least give him a link to where he can find it.
Sent from my HTC Wildfire using xda premium
guys, I did PC49IMG.zip method too. I mean I wrote this file on sd card and than in fastreboot i clicked volume up (update). it has done everything.
I do cym7 installation exactly with your (nooby) instruction. thing is that when installation process goes, it is not finnishing, its freezing or rebooting phone and then not booting exept green HTC logo.
I think this is unique case in this forum. so no more ideas I guess.
http://forum.xda-developers.com/showthread.php?t=1029318
Ahh.... so you're not that much of a noob then, my apologies.
Look here at the second post, try to update clockwork to the latest 5.0.2.0 then try again.
Sent from my HTC Wildfire using xda premium
pampararaam!
finally clockwork 5.0 helped! <3
Thanks a lot
Devige said:
pampararaam!
finally clockwork 5.0 helped! <3
Thanks a lot
Click to expand...
Click to collapse
No worries mate, I'm glad it helped.
Sent from my HTC Wildfire using xda premium

[Q] optimus nexus me v5 [cm7 port] boot loop problem.

since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
1.first flash stock ddlk2
2.download the rom and flash it after :
(i) formatting system,data and cache
(ii) mounting all partitions
When done flashing,wipe data and reboot
davithdeathrider said:
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
Click to expand...
Click to collapse
Try this method
#1-Flash stock rom using odin
#2-Go to cwm
#3-Mount all partitions
#4-Install CyanogenMod#2 kernel
#5-Back and go to Advance then REBOOT RECOVERY
#6-You are on cwm now and the fonts are small
#7-Go to mounts and Format system,data,cache
#8-Dont press back -Mount all partitions
#9-Install zip from sd card-choose zip then choose The Rom
#10-When it is done flashing -Wipe Data - tHEN REBOOT
Do this.
1. Go to cwm recovery
2. Clear data and wipe cache
3. Go to advance :- wipe dalvik cache and battery states.
4. Go to mount & storage :- format system, data & cache.. dont format sd.
5. Then mount everything expect sd-ext.
6. Flash kernel.
7. Go to advance reboot recovery.
8. Again wipe data & cache.
9. go to advance and again wipe dalvik cache & battery states.
10. Mount everything expect sd-ext
This time you dont need to format system, data, or cache in mount.
11. Finally flash rom and reboot.
Hope it work.
Using optimus nexus me v5 on galaxy y

Categories

Resources