Ok well i have a g2 and iv been trying to install adb for the past two days and everytime i get my phone plugged in my computer doesnt recognize it as ADB interface instead it goes under android phone will this still allow the phone to work with ADB or do i have to change it if so is there any way to change it
download HTC sync from HTC and try again
ok so i downloaded it now do i have to uninstall the drive again and then reinstall or is there something i have to do with htc sync
When i install the sync the device manager changed from android phone to android usb device but it still isnt under ADB Interface are there anyother steps i have to do in order to get my G2 to be shown under ADB Interface
Related
Now, I have figured out that I have to actually be in the android-sdk-windows\tools folder for ADB to work, but when I type adb devices it just says List of devices attached but doesn't list my Evo.
I have USB debugging on.
An Android ADB/rooting noob guide would be very helpful right now.
criccio said:
Now, I have figured out that I have to actually be in the android-sdk-windows\tools folder for ADB to work, but when I type adb devices it just says List of devices attached but doesn't list my Evo.
I have USB debugging on.
An Android ADB/rooting noob guide would be very helpful right now.
Click to expand...
Click to collapse
Does it have anything there when you type adb devices? Should come up with a HT and some numbers after it....being your device, EVO.
Actually, there is a step by step Guide for EVO root, and a ADB Guide for Beginners
Your device isn't being recoginized check the driver if u r in windows.
Ok, I managed to figure out the cryptic SDK installer and download the USB driver package to android-sdk-windows\usb_driver. I used Device Manager to install the driver and I pointed it to that folder and I get the "Windows was unable to install your ADB".
Are you already Rooted? as for the Drivers, when I plugged in my EVO via USB, it installed drivers...I also copied the HTC Sync that came on the SDCard w/phone, onto my pc. But I did not have to do anything further.
Can I ask what you are trying to do in adb? and is this for the EVO?
use the cd command to make sure you are in the android sdk tools folder
if you want adb to work
what i do
1. use the cd command to go to the directory where my sdk is located which for example is c:\androidsdk\tools
2. there you go
3. if you want shell make sure your device is connected
"adb shell"
and have htc sync from evo's sd card installed
http://myevo4g.net/main/?p=83
Sent from my HTC EVO
download htc sync and install that. i was having the same problems and apparently the usb drivers that get installed with that app are the ones that worked like a charm for me.
Try
Code:
./adb devices
Instead.
--> try" adb start-server "
If your HTC dont show up, it's usually because the ADB server isnt running. Hope this helps =]
I've rooted a hero before and felt pretty confident with android sdk, usb drivers, etc. After spending an hour trying to get it to work on my win 7 64 bit system, I thought it might save someone some time if I posted what finally allowed me to get adb to work.
My problem was the computer wouldn't recognize the EVO as a device. Even after I installed the usb drivers through android sdk. I tried to manually update them through device manager (pointing it to the usb drivers directory) and still no luck.
As the video linked above showed, the missing piece for me was installing htc sync. use the version that comes on the phone. So connect the phone to the computer, mount it as a drive from the phone menu, then copy over the htc sync directory to your computer, then run it. The version on my phone was 2.031. THEN the computer will recognize it with usb debugging turned on and I'm able to adb to the phone through the command prompt.
Hope that helps someone. Sean
Hi guys, hopefully someone can help.
I rooted the phone using unrevoked and now have clockworkmod recovery on the phone. Tonight I tried to connect the phone to the android SDK with no success.
Windows device manager only shows it as an Android Phone. Everytime I try to manually install the SDK usb drivers, it comes up with a message saying drivers aren't available. I have deleted and reinstalled the SDK usb drivers and have also deleted the android phone from the device manager as well as USBDView. Have had no success whatsoever.
How can I get ADB commands working again on the phone?
EDIT - SOLVED - Apparently I had to reinstall HTC Sync and it worked! strange how these things work!
Hi there, sorry to post this on the forum but its driving me crazy...
Does anyone have issue's with using ADB on there windows Vista computer ?
What i've noticed to get my DHD to work with ADB i've got to uninstall then re-install HTC Sync everytime i want to use my phone with adb.
Otherwise when i ask adb devices nothing show up...
After i uninstall then re-install HTC Sync the device does then show up...
What i've noticed is the phone is listed as an Android 1.0 device when i reinstall HTC sync it then gets listed as MY HTC and works...
I also have another issue i tried to install a radio via fastboot and had the message Remote not allowed, any ideas, its doing my head in
Thanks
I'm getting even more confused now, i just typed adb devices and nothing was shown but i thought i'll try to flash the radio anyway and it worked 1st time ???
Well my htc wildfire is not shown in the list when i execute the command adb devices, and its not present in the windows device manager. However if i enter recovery and plug the usb in, it recognizes my wildfire as android device- my htc and i can see it in the adb devices. Does anyone know how i can install it properly so i can see it in my adb devices when im not in recovery? I had it working somehow in the past but i formatted my pc and cant do it :S
rayven18 said:
Well my htc wildfire is not shown in the list when i execute the command adb devices, and its not present in the windows device manager. However if i enter recovery and plug the usb in, it recognizes my wildfire as android device- my htc and i can see it in the adb devices. Does anyone know how i can install it properly so i can see it in my adb devices when im not in recovery? I had it working somehow in the past but i formatted my pc and cant do it :S
Click to expand...
Click to collapse
I had that issue too and created a thread but it solved itself somehow. You should download the Universal ADB driver (you can download them here: http://download.clockworkmod.com/test/UniversalAdbDriverSetup6.msi. And you can also install the PDA Net drivers for the Wildfire.
Thanks for the reply, however i solved it by reflashing the rom in my wildfire. Thanks
Hi Guys
Do a require a specific driver for the new 4.2.2 system. I have updated my phone to run Cyanogenmod 10.1 and had some issues originally getting adb etc to identify the phone. I have since got past this and now get an unauthorised error in adb. This is normal the issue im having is that my phone does not prompt me when I connect it to my PC. I should be getting a whitelist prompt to confirm I authorise the Pc to run ADB commands.
Has anyone else had this rather than the expected whitelist prompt im getting the little android bloke asking do I want to copy files via usb. Im just trying to work out what I need to do to get my phone to prompt me when I connect via ADB. I have already enabled ROOT access to Apps and ADB, Enabled USB debugging etc
Any help would be appreciated I have tried a number of drivers but only ever get asked to copy file via usb.
Appsdroid said:
Hi Guys
Do a require a specific driver for the new 4.2.2 system. I have updated my phone to run Cyanogenmod 10.1 and had some issues originally getting adb etc to identify the phone. I have since got past this and now get an unauthorised error in adb. This is normal the issue im having is that my phone does not prompt me when I connect it to my PC. I should be getting a whitelist prompt to confirm I authorise the Pc to run ADB commands.
Has anyone else had this rather than the expected whitelist prompt im getting the little android bloke asking do I want to copy files via usb. Im just trying to work out what I need to do to get my phone to prompt me when I connect via ADB. I have already enabled ROOT access to Apps and ADB, Enabled USB debugging etc
Any help would be appreciated I have tried a number of drivers but only ever get asked to copy file via usb.
Click to expand...
Click to collapse
Do you have HTC Sync Manager?
Also, in Device manager does your Drivers have Errors (Yellow Triangle)?
Wilks3y said:
Do you have HTC Sync Manager?
Also, in Device manager does your Drivers have Errors (Yellow Triangle)?
Click to expand...
Click to collapse
Hi Mate
I have tried with HTC Sync on and again after uninstalling it both result in the same issue usb prompt rather than ADB fingerprint prompt. No in Device Manager both of the connections for the device identify and install correctly. One with the phone and another stating something like Android Interface device not on my PC at the mo to confirm the exact name but its something like
My HTC
Android Interface Device or possibly android ADB interface
Appsdroid said:
Hi Mate
I have tried with HTC Sync on and again after uninstalling it both result in the same issue usb prompt rather than ADB fingerprint prompt. No in Device Manager both of the connections for the device identify and install correctly. One with the phone and another stating something like Android Interface device not on my PC at the mo to confirm the exact name but its something like
My HTC
Android Interface Device or possibly android ADB interface
Click to expand...
Click to collapse
Hmm Very strange.
Try:
http://forum.xda-developers.com/showthread.php?t=2217396
Or if not try hasoons Root Toolkit, im sure that installs some drivers too. Hasoons got my ADB working.
Finally, to find ADB device, are you opening command prompt in Platform-tools folder?
Wilks3y said:
Hmm Very strange.
Try:
http://forum.xda-developers.com/showthread.php?t=2217396
Or if not try hasoons Root Toolkit, im sure that installs some drivers too. Hasoons got my ADB working.
Finally, to find ADB device, are you opening command prompt in Platform-tools folder?
Click to expand...
Click to collapse
Nice one cheers mate will try these drivers when I get home later. I was originally using Hasoons toolkit which is what flashed the recovery and new rom but once I updated to 4.2.2 the toolkit stopped. It was coming up as device offline. I have managed to get it working by overwritting the old ADB and fastboot files with the new ones for 4.2.2. The ones the toolkit comes with is 4.1 so was erroring as it didnt know to carry out the fingerprint check.
Yes mate I have tried various methods I have accessed the android\android-sdk\platform-tools folder and run ADB from there this identifies the phone but states its not authorised. I tried using the toolkit with the new ADB and fastboot but get the same.
Im just missing the ADB prompt on my phone for usb debugging just cant for the life of me identify why im getting the copy files from usb prompt rather than the adb fingerprint prompt. Im sure its drivers so am hopeful the ones on the link will fix it. Fingers crossed
I was having issues with adb not finding my device. These drivers worked for me...
crshd said:
I was having issues with adb not finding my device. These drivers worked for me...
Click to expand...
Click to collapse
Nice one mate will try these ones when I get in to on way home now hopeful one of the driver links sorts out the prompt for me will update later thanks guys
Sent from my HTC One X using xda app-developers app
Cheers All removed all drivers for htc one x then downloaded the 4.2 versions from the link
http://forum.xda-developers.com/show....php?t=2217396
once reinstalled adb gave unauthorised error again but then put the prompt up on the phone. So possible the 4.2 contains the info for requesting permission as i havent changed anything other than the drivers adb and fastboot have been the same since i started. Anyway cheers all
confusion about installing driver
crshd said:
I was having issues with adb not finding my device. These drivers worked for me...
Click to expand...
Click to collapse
bro i download your driver but how to install it. my htc one x just start in fastboot mode. i want to unlock bootloader but without adb i am helpless
If you have Windows 7,8,8.1 just enable automatic update and let windows install correct drivers
Sent from my HTC One X using Tapatalk 2