Develop Bugs

HTC Universal problem with conection

Hi.
I have a problem with my HTC Universal. I tried to upgrade software in it and while update PDA is restarting on screen I can notice that bootloader is working but on my PC there is an note that computer can't recognise USB device.
Sorry for my english
Thx for any info how to solve that problem

I have found it. Could somebody delete this Thread.

Need Help: Wizard stuck in bootloader, not recognized by computer

My HTC Wizard (Cingular 8125) is stuck in the bootloader mode. I had successfully flashed a new rom, and all was well until it started shutting down. After a couple of hard resets with no change, I tried to put it in bootloader mode to flash a downgraded rom. Now I can only get to the bootloader screen and the usb connection is not recognized by the computer or the device. Any suggestions?
sl1p
Cingular 8125 G3
IPL/SPL 2.26
ROM CR86 Touch HD 1.2 (Ezinput)

I have a useless suggestion, just to keep this problem at the top of the list so you find help:
First, try using a different USB port on your computer. Maybe the one you're using fried, or perhaps for some reason the device is just not getting enough powre through it. Try one of the ports on the back of your computer, directly connected to the motherboard. I assume the USB port you're currently using is the one you always use, so this probably won't help at all. But worth a shot.
Also, have you posted this problem in the device specific forum? Someone there might be of more assistance.

help needed

hello all.
i just brought a second touch diamond unlocked but i'm having a few problems.
1. does not connect in windows 7 but however does connect to usb mode in bootloader.
now i tried flashing hard-spl onto the device, it goes to as far as the white progress bar, and does nothing.progress bar remains on 0%.
2. i did a hard rest and when the phone finally loaded it was in arabic, makes me wonder if the phone is imported. the s/n does work on the official website.
3. what i would like is help on connecting it to my computer and be able to slash a custom rom it.
please can sombebody please help me out of this pickle pls.

Try downgrading the radio to one below 1.02.xxxxx before flashing the HARDSpl
Also download Windows Mobile Device Centre from MS to get active sync running on the PC

ive done it
thanks all ive it,you guys are great.
thanks for all the advise.

Stuck in "download mode" whenever i plug a usb

Hi i recently purchase a second hand LG-E971 (locked to rogers and not rooted).
The phone seem to be working at first but whenever
i connect the phone to the computer or charge it on the wall
it goes to "download mode" the only way to exit it is to hold pwr for 8sec.
i got all the driver installed properly in "download mode"
tried to factory reset it with E97110D_00.KDZ and E97110E_00.KDZ
with success but still having the same problem
whenever i plug a usb cable in
i installed the driver for PC
LGUnitedMobileDriver S4981MAN38AP22 ML WHQL Ver 3.8.1.exe
when i connect the phone the driver got installed automatically
but the phone doesnt connect to the PC (win7 i tried 2 different computer) in any mode it is only charging
Is there a KDZ that is already Root with CMW or TWRP that i can factory reset it?
Thank you.

I would contact rogers to get the device checker under waranty.
If you have flashed the original KDZ, you eliminate all software related issue that could've cause this. It must be an hardware issue.

i have same problem. since today whenever i plug the phone to charge it it goes to download mode.
any way to fix it? im on cm but didnt change anything recently

I would suggest to start with cleaning the USB pirt on the phone. Compressed air and a wooden toothpick will help. I had a similar problem with my old SGS2, when dirt in the socket was causing sime weird behaviour.
Worth trying before going to the service centre...

having the same issue as well..i hope there's a possible fix available.

dead thread i know but i have SOME valuable information if you have this phone lying around "dead"ish. i went through a lot of crap trying to revive my dead battery phone and i remembered, i just by chance stumbled upon a "solution" of sorts. it basically is taking out the sim card, turning on the phone WITHOUT the cable, and once it's on i can connect it again. the moment i put in a sim, the damn thing starts flaking out. i'm currently using solidkernel 1.95 gproj with cm 12.0 official nightly 10/16(2015). this had happened to me like a month and a half ago or so as well. ANYWAY, it's either a radio thing, a kernel thing, a rom thing, or a combination of the three. that would NOT explain why the phone assumes download mode has been invoked, especially given it should only happen through a special pre-boot procedure using buttons (two no less). still, it is possible that my sim slot is too dirty, or my sim itself is problematic? i don't know. what do you guys think?

[Q] HTC ONE X Conection

Hi there
I have recently brought a HTC ONE X second hand from a friend,
Im using the latest OS on my macbook pro and im trying to connect my new HTC to my sync manager but not having much success,
I have tried all the usual still developers usb debugging etc but still says unable to connect anyone have any advice or help please?
kind regards
Shane

shaneuk said:
Hi there
I have recently brought a HTC ONE X second hand from a friend,
Im using the latest OS on my macbook pro and im trying to connect my new HTC to my sync manager but not having much success,
I have tried all the usual still developers usb debugging etc but still says unable to connect anyone have any advice or help please?
kind regards
Shane
Click to expand...
Click to collapse
does your macbook recognises the device? Maybe your usb cable or drivers are problem?

hi
hiya
yes it says phone connected but nothing else
i can view music and photos but nothing more it says devise not found please reconnect phone yet when i try the home screen on sync manager it says phone connected loading data but nothing!!!