This is a review of Anker Astro E5 15000 mAh external battery: http://www.ianker.com/product/79AN15K-WA
Being familiar with footprint of their E4 battery, when Anker announced a new E5 model with higher capacity I was expecting to see bigger and heavier model with a typical 30% efficiency loss. I know I bring it up in a lot of the reviews, but labeled capacity of ANY external battery is not what your phone battery going to see. Its a total capacity of cells inside of external battery which gets converted to 5V usb interface output and then back to your cell phone battery while charging - the efficiency loss during the conversion reduces the actual capacity by approximately 30%, with some batteries close to 40% and others maybe slightly better to 25%. On top of that, a lot of no name ebay HK sellers have batteries with super exaggerated capacity where you will be lucky to get even half of what they advertise on the label. That is why I only trust a few brands, Anker being one of them.
Once I received E5 unit for review to my surprise, the footprint stayed almost unchanged and difference in weight was negligible in comparison to previous E4 gen. But you actually get 2000 mAh more in capacity to bring it up to 15000 mAh. The battery cells are changing and improving, and I'm glad to see that Anker is keeping up with a new technology. E5 external battery is not exactly feather light, but at about 11.1 oz and 5"x3"x0.9" is manageable and actually the same as Note 2 with Zerolemon battery. The exterior is solid plastic, no flex, and comes in either white or black. For this review I chose a white unit and found it to be great to cover up any fingerprints. The top has a large power button with dual functionality to also turn on built-in led light. At full charged battery capacity, the light could last up to 700 hours if you only use it for that purpose. Next to power button you have 4-led capacity/charging indicator in 25% increments. Charging input to the battery is a standard micro-usb and has 1.5A charging speed for a fast charging of this battery. Output is a dual full usb port, rated at 2A and 1A both of which can be used simultaneously to deliver 3A of combined current. Each port current output is regulated where I confirmed charging Note 2 from one gave me max 2A and from the other one only up to 1A.
This extended battery comes with usb cable and interchangeable tips for micro-usb, mini-usb, and apple 30-pin connector. Also, it comes with a convenient storage pouch for a battery, cable, and attachment. It also comes with a detailed manual and 18-month warranty card. But there is also a big surprise. I have been reading other independent test reviews of this module and it turned out to have an actual capacity close to 11,800 mAh. We are talking about 21.5% efficiency loss which is very good considering typical batteries of such capacity have it at 30% or higher. This mean you can charge your Note 2 with a standard battery almost 4 times, or easily charge Zerolemon and have some juice still left - all this at a max 2A speed. Overall, I'm very impressed with this battery and its performance!
Here are the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Awesome! Thanks for this! What are you using to measure the charge that is going in to the Note 2? I have an external battery rated at 12,000mah, that has both 1A and 2A ports, and would like to see what it's actually putting out, as well as check some wall adaptors that I have. Thanks for the review! Anker is also one of the few brands that I trust as well!
SwiftKey'ed from my White Sprint Note 2 using XDA Premium
stanglifemike said:
Awesome! Thanks for this! What are you using to measure the charge that is going in to the Note 2? I have an external battery rated at 12,000mah, that has both 1A and 2A ports, and would like to see what it's actually putting out, as well as check some wall adaptors that I have. Thanks for the review! Anker is also one of the few brands that I trust as well!
SwiftKey'ed from my White Sprint Note 2 using XDA Premium
Click to expand...
Click to collapse
it says it in the last screenshot dude, really? LOL
Galaxy Charging Current
Galaxy Charging Current *Lite* (free version): https://play.google.com/store/apps/...hbnRpcy5nYWxheHljaGFyZ2luZ2N1cnJlbnQuZnJlZSJd
I actually found it to be relatively accurate by comparing charging time versus charging percentage. Ignore "Now" value. Just look for Max/Avg as your charging currents. This app comes very handy for those without root, like myself, to measure your charging current.
vectron said:
Galaxy Charging Current *Lite* (free version): https://play.google.com/store/apps/...hbnRpcy5nYWxheHljaGFyZ2luZ2N1cnJlbnQuZnJlZSJd
I actually found it to be relatively accurate by comparing charging time versus charging percentage. Ignore "Now" value. Just look for Max/Avg as your charging currents. This app comes very handy for those without root, like myself, to measure your charging current.
Click to expand...
Click to collapse
Thanks!! Just tested it out. Like you said, the Now value isn't what the charging rate actually is. Took me reading some reviews on the Play Store to figure that out. The Now value is what the device recommends, while the Average value is what rate you're actually charging at.
I'm not sure how accurate it is though. While using my HTC wall chargers that came with my both my black Evo LTE and white one, the values are Maximum 900, Now 1798, and Average 900. I'm getting the same numbers while using the Samsung wall charger that came with my Note 2. I assume that 900 is correct for the HTC chargers, as they're only 1Amp chargers so I'm getting .9Amp from them. The Samsung charger is 2Amp though, so it should be twice as high as the HTC chargers.
EDIT : Just tested my 12,000mah PowerBank. I got 500 out of the 1Amp port, and 1700 out of the 2Amp port! Very happy with those numbers!! Especially it considering that it appears to be charging at a higher rate than my OEM Samsung wall charger!!!
SwiftKey'ed from my White Sprint Note 2 using XDA Premium
:good:Solid review bro! Something that powerful could almost charge the ZL battery twice, haha.
stanglifemike said:
...
I'm not sure how accurate it is though. While using my HTC wall chargers that came with my both my black Evo LTE and white one, the values are Maximum 900, Now 1798, and Average 900. I'm getting the same numbers while using the Samsung wall charger that came with my Note 2. I assume that 900 is correct for the HTC chargers, as they're only 1Amp chargers so I'm getting .9Amp from them. The Samsung charger is 2Amp though, so it should be twice as high as the HTC chargers.
EDIT : Just tested my 12,000mah PowerBank. I got 500 out of the 1Amp port, and 1700 out of the 2Amp port! Very happy with those numbers!! Especially it considering that it appears to be charging at a higher rate than my OEM Samsung wall charger!!!
...
Click to expand...
Click to collapse
Mike, which 12kmAh charger are you using? I know Anker stuff is universal for Apple/Android, while some other ones will drop your charging current to max 0.5A when connected to "apple" port. Another question, which usb cable are you using? Unless if its original Sammy cable that came with OEM charger or a cable like from monoprice with 24AWG/28AWG rating (thicker power wires to handle up to 3A of current), the cable itself its a bottleneck if its designed for a lower charging current. So for example, if you are using HTC charger/cable and then used their cable to connect to Samsung wall charger - you could be current limiting your phone (thinner wires, more resistance). And even if you are using OEM Samsung wall charger and cable - I noticed that in our house some outlets can't supply enough current depending on what other stuff is connected to the same shared power branch.
vectron said:
Mike, which 12kmAh charger are you using? I know Anker stuff is universal for Apple/Android, while some other ones will drop your charging current to max 0.5A when connected to "apple" port. Another question, which usb cable are you using? Unless if its original Sammy cable that came with OEM charger or a cable like from monoprice with 24AWG/28AWG rating (thicker power wires to handle up to 3A of current), the cable itself its a bottleneck if its designed for a lower charging current. So for example, if you are using HTC charger/cable and then used their cable to connect to Samsung wall charger - you could be current limiting your phone (thinner wires, more resistance). And even if you are using OEM Samsung wall charger and cable - I noticed that in our house some outlets can't supply enough current depending on what other stuff is connected to the same shared power branch.
Click to expand...
Click to collapse
I think PowerBank is the brand, and Long March is the model. There is a long thread in the Evo LTE Accessories subforum (my other phone), and that's how I heard about it. I normally wouldn't buy an off brand accessory, but with many XDA members giving great feedback, and some have had it close to a year, I decided to try it out. Very happy that I did!! I looks a lot like your Anker actually. It has 2 USB ports for charging other devices, a 1 Amp and a 2 Amp, and also has a little LED flashlight as well. It works great and this app you mentioned showed me that the 2 Amp port is charging at 1.7 Amp(while using my HTC micro USB cable, so it may charge at an even higher rate using the Samsung cable), so I'm happy with that.
For the Samsung wall charger, I'm using the Samsung wall charger and Samsung micro USB cable. I do have it plugged in to a power strip though, so I'll have to try it plugged directly in to a wall outlet with nothing else plugged in. Thanks for the info!
EDIT : Update - after trying the Samsung charger in a wall outlet instead of the power strip, I'm still getting 900(.9 Amp). Maybe my charger is just not putting out the Amperage it should anymore, and I should just buy another Samsung wall charger if I want to get the correct Amperage. I rarely use my wall charger though, as I just use my external battery charger to charge my extra Samsung battery. When I do plug in the phone, it's usually in to my PowerBank while I'm sitting outside playing on my phone and drinking/smoking (never smoke in my house!).
SwiftKey'ed from my White Sprint Note 2 using XDA Premium
stanglifemike said:
I think PowerBank is the brand, and Long March is the model. There is a long thread in the Evo LTE Accessories subforum (my other phone), and that's how I heard about it. I normally wouldn't buy an off brand accessory, but with many XDA members giving great feedback, and some have had it close to a year, I decided to try it out. Very happy that I did!! I looks a lot like your Anker actually. It has 2 USB ports for charging other devices, a 1 Amp and a 2 Amp, and also has a little LED flashlight as well. It works great and this app you mentioned showed me that the 2 Amp port is charging at 1.7 Amp(while using my HTC micro USB cable, so it may charge at an even higher rate using the Samsung cable), so I'm happy with that.
For the Samsung wall charger, I'm using the Samsung wall charger and Samsung micro USB cable. I do have it plugged in to a power strip though, so I'll have to try it plugged directly in to a wall outlet with nothing else plugged in. Thanks for the info!
EDIT : Update - after trying the Samsung charger in a wall outlet instead of the power strip, I'm still getting 900(.9 Amp). Maybe my charger is just not putting out the Amperage it should anymore, and I should just buy another Samsung wall charger if I want to get the correct Amperage. I rarely use my wall charger though, as I just use my external battery charger to charge my extra Samsung battery. When I do plug in the phone, it's usually in to my PowerBank while I'm sitting outside playing on my phone and drinking/smoking (never smoke in my house!).
SwiftKey'ed from my White Sprint Note 2 using XDA Premium
Click to expand...
Click to collapse
What you refer to is Yoobao brand power bank model "Long March". Unfortunately, there is only one official reseller of Yoobao brand in US and its KeviKev (I reviewed Yoobao Thunder 13000 mAh from them before - http://kevikev.com/Samsung-Galaxy-NOTE-II-2-N7100-Cases-and-Accessories_c47.htm). Long March is 11,200 mAh model. Did you get it from Amazon or eBay? It's a Chinese knock off of Yoobao, but it doesn't matter since it works for you. They all use the same battery cells anyway, and original Yoobao stuff might be a bit more robust and have more durable plastic shell. But listen, if the one you have works - its all good and don't worry about it!!!
Strange about Samsung wall charger. Sounds like something is gone south. Btw, don't even bother buying anything labeled as "original OEM Samsung wall charger" from Amazon or eBay - it's all fake knock offs as well. For the fun I just look on Amazon reviews, and everybody complaining about Samsung OEM wall charger not even being able to supply 1A. That's a problem with Amazon, anybody can create a merchant account and list their product under original manufacturer listing. And the rest is history because you will never be able to find original Samsung part since everything else will be a fake copy But I assume you are using your original wall charger and cable which came from Samsung when you bought N2?
flynnchen said:
Yoobao brand is quite good. I had one before. Is anker battery stable now ? I just found out this post on xda
http://forum.xda-developers.com/showthread.php?t=1361749
Click to expand...
Click to collapse
That explosion has nothing to do with Anker batteries. That was highly/almost 100% due to the black cheap/low amp charger. I had a random cheap black USB charger similar to that for charging low amp Emerson bluetooth headphones, which was 400 mAH output, and we charged my brother's IPAD 2 with it, and it started to smoke. Same issue happened when charging his S3 with that cheap charger. I think it was their mistake for providing such a terrible charger, which is why it seemed the white one was probably better. The lesson is: don't charge anything that has a higher capacity/requirement with something far below it's capacity - otherwise, you're just asking for a dangerous situation to occur. That's just my two cents and observation from what I have seen, read, and personally experienced
how to charge
Excellent and informative review! 2 questions (I am a novice...). How do I charge the charger...can I use either my iphone 5 plug (output 5V/1A) or ipad2 plug? And, when charging my devices, is it the 1A socket for iphone 5, and 2A socket for ipad 2? Thank you!
---------- Post added at 10:18 AM ---------- Previous post was at 10:07 AM ----------
Excellent and informative review! 2 questions (I am a novice...). How do I charge the charger...can I use either my iphone 5 plug (output 5V/1A) or ipad2 plug? And, when charging my devices, is it the 1A socket for iphone 5, and 2A socket for ipad 2? Thank you!
maestrojohn said:
Excellent and informative review! 2 questions (I am a novice...). How do I charge the charger...can I use either my iphone 5 plug (output 5V/1A) or ipad2 plug? And, when charging my devices, is it the 1A socket for iphone 5, and 2A socket for ipad 2? Thank you!
Click to expand...
Click to collapse
To charge the charger you can use any wall charger with micro-usb output. Since this is Android forum and Note 2 section, I assume you have one of those. Otherwise as you aware the charging cable for iPhone 5 is not micro-usb. But to charge your device, you can do that with any phone or tablet since charging/data cables have usb on one side (that will go into a charger) and whatever connector you are using on your device on the other side of the cable. In theory you can use either outputs.
Hello! Great review, I purchased it for 50 bucks on amazon 5 minutes ago because of the review. I am a noob, sorry in advance, I made this account to ask these two questions: 1: I just wanna use it for my iPhone 5, do i plug it in on the 1A or 2A? If both is ok, which one is better for the battery in the phone? 2: I will need an adapter, which one is better? Micro Usb to Lightning or 30pin to Lightning? I dont like the size of the 30 pin to lighting, so is it ok to purchase a micro usb to lighting instead? Does this affect anything like charging time?
Thanks for answering, have a nice day
flotschi13 said:
Hello! Great review, I purchased it for 50 bucks on amazon 5 minutes ago because of the review. I am a noob, sorry in advance, I made this account to ask these two questions: 1: I just wanna use it for my iPhone 5, do i plug it in on the 1A or 2A? If both is ok, which one is better for the battery in the phone? 2: I will need an adapter, which one is better? Micro Usb to Lightning or 30pin to Lightning? I dont like the size of the 30 pin to lighting, so is it ok to purchase a micro usb to lighting instead? Does this affect anything like charging time?
Thanks for answering, have a nice day
Click to expand...
Click to collapse
You can use either 1A or 2A outputs. Your phone has a fixed charging speed and will not draw more current that it's limited to. So for example if iPhone can charger at a speed of 1A per hour and you connect it to an output that can supply 2A per hour - it will only draw at 1A per hour speed. BUT, if you have Note 2 which takes advantage of 2A per hour charging and you plug it into 1A port, it will be charging at half the speed.
Regarding cable, try to minimize number of connecting adapters. For example, you get a cable with 30pin connector and you can add 30pin to Lighting adapter to it, but with every connection you add resistance which going to affect total amount of current and can slow down the charging, etc. You want to have point-to-point cable. So I would recommend using USB to Lighting connector cable. Not micro-usb, but usb because charing ports on this external power supply are full size usb. Only the port to charge this battery is micro-usb because of a common connection with other charging cables.
reply removed...
I wonder if you could try something for me.
Could you find out if the Anker will supply a phone/device while it is itself being charged? Also, whether it will keep supplying the phone/device without interruption when its own charging supply is connected and disconnected?
I want to use it like a mini-UPS for my phone while charging it from my bicycle dynamo, but for this, it needs to cope with a charging supply which stops and starts, while continuing to supply any connected devices.
I think I tried it before, and it didn't work. These external battery devices are not intended to work in pass-through mode. I think there are some other ones (I'm 100% sure if that was NewTrent), but the vendor will not guarantee the device under warranty because of an additional overheating and cut of the efficiency. This will really complicate the controller of such ext battery where it has to keep balance between charging and discharging of the same battery at the same time. I'm pretty sure Anker stuff will not allow that because they have smart current monitoring functionality built-in in order not to overcharge or over-drain the device.
But it would be an interesting experiment where you connect ext battery to the outlet and to the phone. I wonder if it starts charging battery first until it's full, and then switch to charging the phone
vectron said:
I think I tried it before, and it didn't work. These external battery devices are not intended to work in pass-through mode. I think there are some other ones (I'm 100% sure if that was NewTrent), but the vendor will not guarantee the device under warranty because of an additional overheating and cut of the efficiency. This will really complicate the controller of such ext battery where it has to keep balance between charging and discharging of the same battery at the same time. I'm pretty sure Anker stuff will not allow that because they have smart current monitoring functionality built-in in order not to overcharge or over-drain the device.
But it would be an interesting experiment where you connect ext battery to the outlet and to the phone. I wonder if it starts charging battery first until it's full, and then switch to charging the phone
Click to expand...
Click to collapse
I did just that yesterday, and it worked fine. Now, the anker would not actually increase its charge due to simpe physics: it charges with 1.5A from the wall, and my nexus 10 used 1.2A of those, and adding some inefficiencies on that it would likely mean that it would just hold a charge level in the anker battery, not increase it. But as soon as the tablet ramps its current draw down the anker would suck up any left over juice. This becomes even worse of course if you charge a phone at the same time.
One little note: The battery in this is not the most awesome (also the capacity measurement is a simple voltage-based instead of counting coulumbs). While charging with ~1A from the 1A port, when I added my nexus 10 to the 2A port the charge indicator actually went from 50% to 25%. When removing the tablet the LEDs indicated 50% charge again. This is due to voltage sag which is itself due to internal resistance of the batteries. Meaning: The faster you charge the more heat will be wasted in the batteries. So to really prolong the battery life you should actually charge slowly, at least as far as the Anker is concerned.
Thanks for the review, I will probably be getting one now.
My phone came with a 500ma 5v charger, I seemed to have misplaced it, I have a spare 500ma 5.2v charger at home, Is it safe to use it? Will the extra 0.2V have any adverse effects?
Thanks
Probably OK,
I would say it is OK for most part. Usually, AC/DC adapters are not that precision. You can check voltage output with ohm meter under load for actual voltage output.
Simple way to fix is connect 5v zener diode for quick voltage control between + and -, if your device battery is Lithium battery that is sensitive to input voltage. Check device specification for battery type. You can get zener diode from Radio Shack or electronics part store.
@rhanxdad: good reply but I'm afraid I'm only one of few people in this forum section who understood what you meant Not everybody has EE or electronic hobby background
Here is my take on this. Your battery is 3.7-3.8V, and once you plugin that 5.2V charger into micro-usb (5V standard) interface of your phone conector it depends on tolerance of its input of the internal converter chip (5V -> 3.7V for charging). This can't be guaranteed and will vary between phones, just my guess. Considering your have 500mA charger, I can also guess you don't have the latest brand name smartphone where most of them use 1A-2A chargers. Another thing, everybody makes 5V micro-usb wall chargers, and the fact that you have one rated at 5.2V sounds like some cheap ebay part? So taking all this into consideration, I would probably stay away from that charger. Look up on Amazon, you can find a nice one under $10, like from Anker or Ravpower.
Final Answer
@vectron, yes your answer is better, haha. Sorry about the ambiguous answer.
@aqswde123, How is this, if it is only 5v, then connect to Laptop/PC USB through your Sync cable. You probably already own this and then it will be free.
Good luck.
Thanks guys, will order a new charger and will use my comp to charge it in the meanwhile. After starting this thread I have been googling and I've read that the usual USB tolerance is between 4.75 - 5.25 V and hence anything inbetween is safe, but i wont take the chance anyway.
Ordered a QI charger off Amazon (the same Lerway Chinese brand one everyone seems to get) and it's charging incredibly slow. Not sure if the app I'm using to record the charge rate is incorrect or I'm not reading it correctly but it says it's charging at only +200mA max sometimes as slow as <50mA.
Anyone else experience this?
skusa93 said:
Ordered a QI charger off Amazon (the same Lerway Chinese brand one everyone seems to get) and it's charging incredibly slow. Not sure if the app I'm using to record the charge rate is incorrect or I'm not reading it correctly but it says it's charging at only +200mA max sometimes as slow as <50mA.
Anyone else experience this?
Click to expand...
Click to collapse
What kind of power source you use to power the charger and what kind of cable do you use?
If you connect the charger to computer USB port it will not provide enough power for the charger. Same with cheap cables, like the ones mostly included with the generic QI chargers. You need a premium USB cable.
Also if you have a thick case on your phone it will diminish the charging current received by a coil in your phone.
Firstly check how much power and what current your charger gets, so instead of plugging the QI charger, plug your phone and check what amperage you get (I use Current Widget). If it's less then 1600mA (maximum amperage that N5 will allow from direct charging through cable) your charger is underpowered and you need to change socket charger to 2A one. If you're using 2A socket charger and still get under 1600mA then your micro USB cable isn't good enough.
Properly and fully powered Qi charger should charge your bare phone (without a case) at about 700-800mA.
Znamir81 said:
What kind of power source you use to power the charger and what kind of cable do you use?
If you connect the charger to computer USB port it will not provide enough power for the charger. Same with cheap cables, like the ones mostly included with the generic QI chargers. You need a premium USB cable.
Also if you have a thick case on your phone it will diminish the charging current received by a coil in your phone.
Firstly check how much power and what current your charger gets, so instead of plugging the QI charger, plug your phone and check what amperage you get (I use Current Widget). If it's less then 1600mA (maximum amperage that N5 will allow from direct charging through cable) your charger is underpowered and you need to change socket charger to 2A one. If you're using 2A socket charger and still get under 1600mA then your micro USB cable isn't good enough.
Properly and fully powered Qi charger should charge your bare phone (without a case) at about 700-800mA.
Click to expand...
Click to collapse
Thanks for the info I thought I was going crazy.
No case so that isn't an issue.
I have the phone connected direct to a 3A charger currently and am only getting 995mA charge rate with the screen on and it looks like full 1.5A with the screen off. Maybe a defective QI charger?
Nope. Everything is normal. You just need a better cable that will manage to transfer 2A of current.
QI charger needs 2A input to give 1A output on a coil. Giving about 70-80% efficiency rate, your phone would be getting about 700-800mA.
Since your charger gets only about 1A input it gives about 500mA output. Therefore giving that efficiency rate, your phone should be getting about 350-400mA tops. It is possible that your charger has lower efficiency rate (some have about 50-60%), so the values that you're getting are pretty normal unless you use a premium micro usb cable, preferably with thicker, like AWG24 or lower (the lower value the better) power wires.
Might want to try these cables, a lot of people have had great luck with using them on Qi chargers. Don't know which length you would need, they have 3 and 6 foot cables. For the price, I'm ordering 6 6ft cables.
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=9762&seq=1&format=2