that's my screen,when a use my defy as usually then the screen no response!what'terrible when some one call me i can't answer it,because the screen no response,i've change the touch screen but no change,
Maybe reboot your phone will work.
Maybe the connector of touchpanel is broken,check it carefully.
Related
I have put in a new LCD screen into the device and it refuses to power up.
I can still hear wm6 in the background loading with all my reminders etc.
The old screen is cracked but still powers up etc.
Any ideas?
Fixed the problem.
I had to make sure all the contacts were touching for the LCD screen to work properly.
I guess during the cracking it bent something....
Hi,
i got my Desire rootet ( S-OFF, Clockworkmod 3.0.5, PirateRum ( based on Cyanogenmod 7 nightly )
my hboot is: 0.93.001
PVT1.
SLCD
Now.
If anyone call me, the screen goes black, normally.
If my partner ends the call, the screen wont wake up from this "sleep" mode.
If i type the power button the buttons for search and home become bright...
I think its a bug with the SLCD Screen... anyone got this problems to?
Dude,
The desire has a proximity sensor, so when you answer a call and put it by your ear, it switches off the screen.
Perhaps there is a bit of a bug in that rom, so it forgets to switch the screen back on when the call ends.
I highly doubt its a hardware issue.
Sent from my HTC Desire using XDA App
Sometimes it works, sometime it dont works.
This Desire is 2 Weeks old... Very sick. but thanks
MULTIPLI said:
Hi,
i got my Desire rootet ( S-OFF, Clockworkmod 3.0.5, PirateRum ( based on Cyanogenmod 7 nightly )
my hboot is: 0.93.001
PVT1.
SLCD
Now.
If anyone call me, the screen goes black, normally.
If my partner ends the call, the screen wont wake up from this "sleep" mode.
If i type the power button the buttons for search and home become bright...
I think its a bug with the SLCD Screen... anyone got this problems to?
Click to expand...
Click to collapse
Hi,
I have exactly the same problem with my Desire SLCD, i tried to go back to stock RUU but nothing changed
If someone got a solution.
Hey Hey i have the solution!
I fixed the problem of blank screen by cleaning dust between screen and earpiece (especially at left, where is the proximity sensor).
You can clean it like me with an air duster spay or/and with a vacuum cleaner
It works well now!!!
Enjoy!!!
how to?
i am interested
guys, check pls in what type of network screen stays black 3g or gsm,
this issue is after call only or in regular use from time to time?
this is know problem on desire, there can be falutly mobo, if your screen dont react and stays black - only battery unplug helps and this happends when your phone trying to switch between network GSM to 3G/HSDPA or from 3g to gsm
was having this issue long time + self rebooting and sent by desire to repair, they replacing mobo and know everything work fine for me,
proximity senzor works good in many cases, you can download apps to test you sensors if the proximity sensor react correctly and changing values then is not broken and pro problem is elsewhere,
face this problem on my SLi9003 and no one answer my question
This worked for me…. Finally
sh7adeh said:
face this problem on my SLi9003 and no one answer my question
Click to expand...
Click to collapse
I'm having the same problem on my Atrix HD. This fixed it. There's an Xposed module called App Settings. If you don't know what it is Google it. I looked up my phone app, dialer app and com.android.incallui in the App Setings module and selected the setting 'Show when locked'. ( you must click the little floppy disk icon to save the setting) this shows the phone and dialer ui's o er the lock screen, but still allows the proximity sensor to turn the screen off when it's to my head
Hi! I have a big problem with my Rhodium.
I have post another similar thread before but aybody seems to respoding..
I don't know what happened to my phone.
The touchflo3D seems to not responding. in other words the screen reacts when I tap on it, but I can't move or select anything on the screen.
I don't understand if it's a software or hardware problem.
The problem born with a custom rom I installed.
R [WWE|GER|FRA|ITA|NLD] |Feb 12| Energy™-.¸¸.·´¯ 6.5|21916 / 6.5.X|28244 * Sense 2021
after few days of no problem, the screen became as I described, incapable to select anything.
I tried also to move to the settings to disactivate sense but it was impossible with only the keyboard.
I searched on the forum for the solution, but the methods proposed didn't resolve the problem!
So I decided to return to the ufficial Rom.
RUU_Rhodium_HTC_ITA_1.19.408.1_Radio_Rhodium_3.44. 25.27_Signed_Ship
I performed a HardReset before the reinstall of the ufficial rom, but the problem remained.
So I performed a task29, but after the reinstall nothing changed and the TouchFlo seem to be broken.
I followed the guides proposed but I don't think I commited something wrong...
I suppose is a problem of the software because, I repeat, the screen react to my tap when is in minimum light.
Please help me because I don't know whato to do...
Tnx to All!!!!
Is the issue *only* with Touchflo? Can you tap on the Start menu and bring it up?
I'm confused as to why you say "the screen reacts when I tap on it, but I can't move or select anything on the screen"
How can you tell if the screen reacts?
Mnementh666 said:
Is the issue *only* with Touchflo? Can you tap on the Start menu and bring it up?
I'm confused as to why you say "the screen reacts when I tap on it, but I can't move or select anything on the screen"
How can you tell if the screen reacts?
Click to expand...
Click to collapse
Hi! No I can't tap on the start menù and when I tap on any icon on the screen nothing happens!
What I meant with "the screen seems to react" is that (sorry for my English XD!) before the screen goes black, the light goes high to low, ok?
when the screen has low light, and I tap on the screen, the light goes to high, so it seems that the screen can react to my tap.
tnk you very much for your response.
If I wasn't capable to explain correctly, please tell me 'cause I'm a little worried for my phone!
Bye.
i don't want to bring down any hope left, but if it does not respond to anything you do, i think your phone has just lost its flat cable. It might be broken and fixing it up would be a total pain. I would bring it back to where you bought it. Contact me through pm for further details, if u're still wondering what does this mean.
G4rreT84 said:
Hi! No I can't tap on the start menù and when I tap on any icon on the screen nothing happens!
What I meant with "the screen seems to react" is that (sorry for my English XD!) before the screen goes black, the light goes high to low, ok?
when the screen has low light, and I tap on the screen, the light goes to high, so it seems that the screen can react to my tap.
tnk you very much for your response.
If I wasn't capable to explain correctly, please tell me 'cause I'm a little worried for my phone!
Bye.
Click to expand...
Click to collapse
This sounds either like a broken / damaged ribbon cable (the "flat cable" the previous poster was referring to) or a damaged / broken digitizer.
On my old phone, the digitizer slowly broke - first the accuracy of the touchscreen would slide, then it got to the point where it wouldn't register 'on screen' at all, even though the phone could still tell I was tapping the screen because the backlight would come on etc, just as you describe.
Replacing the digitizer will cost money, but if you're going to do that find someone good at doing it! And also consider getting the device checked out and replacing the ribbon cable too, it's probably one of the most vulnerable parts of the device so it can never hurt to be overly cautious and replace both of them. Unfortunately there's always a cost involved
Let us know how you get on...
Hi the cable is not the only thing that can couse your screen to not respond, ive seen a tp2 that stoped responding because IT captured humidity in the digitizer screen, you can tell if this is the case by mooving your phone under the sun light and you will notice a kind of rainbow loking transparente spot, this humidity causes the digitizer screen to get stuck, the Solution can be to let it dry in the sun, or to rub it jently against your leg, the fricción can help to dry out the humidity, hope IT helps.
Search on here "tp2 screen not responding"
There is a thread on here I found about the screen not responding, and cleaning around the chrome edge with something thin, carefully, (I used my fingernail, which worked, but I lifted the contact too much down by the buttons on the bottom of screen). Worked for me and a few others. Good luck.
Hi all!
I hope someone could help me,
My Desire Z touchscreen works weird, sometimes it does 2 unusual things:
-sometimes when trying to scroll it will zoom in or out like there is another finger there but there is not. If i run pointer location test, then it shows there is screenpress in the middle, but im not pressing it. the only way to fix it is to turn off the screen then turn back on.
-other times, the problem is similar, about 1/4 of the touchscreen in the middle/horizontal does not recive input. And the whole screen wont recognize touch correctly.
The problem happens mostly -but random- when i play games, or read pdf!
Is this problem related to the digitizer? I have tried more ROMs, the same problem. Not charging, no screen protector on the device, no break on glass.
Thanks in advance
I have problem with my beloved phone. Sometimes there are several horizontal lines appear in the bottom of screen and disappear after being locked - unlocked. Is that a bug of firmware/ROM? I used Revo 5 and now using Carbon 4.4.4 n the anoyying line still appeare sometimes. Maybe the problem is recovery or anything like that..
Anyone knows how to solve it??
Defective LCD
Try to replace a brand new LCD buddy, the lines that appear is a sign that your LCD is not in good condition, however you can still use your phone for several period of time.