Related
¿Where the fck can we buy an MHL adapter microusb-hdmi or a full cable to use with the phone?
tada!
http://www.clove.co.uk/samsung-galaxy-s-ii-i9100-mhl-adaptor
As clove give a mid june date, anyone know other site to buy a mhl cable now?
try here, but its more expensive
http://cgi.ebay.com/Samsung-Galaxy-...183007?pt=PDA_Accessories&hash=item5ae01ef99f
note: this was supposed to be sold for the galaxy s, but i think it didnt work, so it was abandoned. I think that what happenend. If im wrong, someone kindly correct me please
Hum, I think that MHL is a different kind of cable, in concept it is the same input output, but the middle conversor I dont know.
I prefer not to try at that price until I know for sure
Is this not all that is needed
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320679284523
Hope so as i orderd one a few hours ago.
Is this not all that is needed
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=320679284523
Hope so as i orderd one a few hours ago.
Click to expand...
Click to collapse
I doubt that'll work as it's not an MHL connector, which I understand is HDMI and USB combined, but if it somehow does... bargain!
Lol now i look properly its not going to work at all
imo very stupid not to use standard HDMI mini port... now we have to buy adapters and ****.. and the phone won't charge if you don't have special adapter.. epic fail imo.. anyway they should include adapters with the phone.
I agree, they should include the required cables and adapters in the box, other manufacturers like Nokia do with their flagship handsets.
I think MHL will ultimately be better than mini HDMI port though, since its looking very likely to become the next standard connection.
I'm hoping to get one of the MHL cable/adapters from the MHL consortium for my Clove Blog review, if I do then I will post up a youTube video for everyone. At the present time the consortium PR person is trying to procure one for me, but it seems likely its inordinately difficult, so remains to be seen whether I will have it in time for the review.
In the very least, you'd expect them to have manufactured and released the accessories by the time the actual phone is released.
lambda-tek.com/componentshop/index.pl?prodID=2191847
due to my low post count i cant post this as a link.
have spotted this adaptor for the HTC Flyer, says will be in stock 16/5
I assume this would work guess a little more research needed 1st.
Here you go... It's supposedly the official Samsung Galaxy S II MHL adaptor.
http://www.clove.co.uk/samsung-galaxy-s-ii-i9100-mhl-adaptor
crabjoe said:
Here you go... It's supposedly the official Samsung Galaxy S II MHL adaptor.
http://www.clove.co.uk/samsung-galaxy-s-ii-i9100-mhl-adaptor
Click to expand...
Click to collapse
First stock due mid-June just saying.
Can someone confirm for me that this is the same cable. They call it an Ethernet Micro-HDMI (Type D).
Edit: Monoprice[)0Tcom has them for like 5 bucks. I can give the link so you can see the cable once I get some more posts in here.
I'm not worried about the Ethernet part, it should not get in the way because the extra connections for it are female.
Also, there is a lot of great info on these forums. Look forward to sticking around and modding some phones in the future.
Edit 2: So when searching for the Samsung cable by Goog'ling the phone, they call it either "microUSB" or "HML port"
That site has two different types that they call: Mini-HDMI (Type C) and Micro-HDMI (Type D) the type C looks like the usual Samsung cable connection, I was just wondering if there is some different way they wired the Samsung cables so that we had to use those ones. I cannot see them doing that though since there are many devices switching to the same cable as well.
The trick is that standard HDMI so far does not include a link for power. The Samsung MHL adapter has a microUSB plug that connects into the phone and a microUSB jack to connect your charger, and the mini-HDMI jack to hook up to the TV so the device gets charged while playing back. In a future specification update, HDMI will probably be amended to include a power link.
Some info here: http://www.youtube.com/watch?v=ZtwTcnR0hqA
Clove told me that the MHL cables from different manufacturers will be compatible which is useful to know. I guess they all conform to the standard
Sent from my GT-I9100 using XDA App
Just seen this in the description for the HTC version - interesting
" Also if your television supports MHL enabled HDMI connections, then you can charge your HTC Sensation when connected and control the Sensation using the television remote (MHL enabled televisions expected late 2011)"
Sent from my GT-I9100 using XDA App
Thats only true if you TV is MHL capable (hint: nobodies is yet).
i dont understand how the phone has is out but the cables are not? how do they know it works if theres no cables lol
Has anyone connected their Galaxy S III up to a Motorola Atrix Lapdock?
If I remember well, the Motorola lapdock uses a HDMI plug to connect with the Atrix.
GS3 doesn't have one, you should get a MHL/HDMI convertor. Don't know if it'll work as a native HDMI plug will do.
If someone have both, it could be intereting to see if that work
So I'm going to dust this thread off a bit because this is the project I'm looking to work on -
I've ordered an Atrix Lapdock for my Bionic (very simple mod to dock the bionic) but as my personal phone is an S3, I'd like to use the lapdock with it primarily while still having the option to dock the bionic while on the go (I carry both phones). (While I'm at it, I'll probably look to get an hdmi micro extension cable and usb-micro-male to usb-A-male extension and try and use the lapdock as the base station for the Samsung Slate 7 PC i barely use since the interface is so poor)
Here's what I've gathered by reading various threads.
Lapdock:
The Lapdock will work with any HDMI source as seen in other threads (ie connecting to a PS3 via hdmi female micro to hdmi male standard adapter, $4 part from dealextreme). Others have posted how they can use the lapdock as a self powered hdmi external monitor with their laptop (very cool usage btw considering it's size)
Droid Bionic:
easily docks to the Atrix version of the lapdock by simply rotating the hdmi/micro usb connectors 180degrees in their sockets since they're piped in with short cables.
Galaxy SIII / S3 (mine is the T999):
here's where it gets tricky.
As I've gathered about the 11pin micro usb port (on the S3 and shared by the Note 2):
the original 5 pin MHL standard was ditched in favor of the 11pin MHL type connection. this in theory would allow the use of hdmi output with simultaneous usb otg and charging capabilities.
reviewing this thread here: (showthread.php?t=1953061&page=2) one can see that an OTG cable was modded with a simple resistor to allow for charging - member triff (the OP) was able to get this going and noted the log he got when the cable was plugged in reported 'hdmi fail' which leans to failing to initiate an hdmi connection... later in the thread member MRBR7 alludes to having an hdd running to view while charging on the OTG cable - his post is a bit vague as to whether he did the mod on an OTG cable or an HDMI cable.... i'll have to follow up.
finally, the posts in this thread (first 12 pages are a quick read showthread.php?t=1741583&page=12) provide resistor values and some close ups of the boards for the 11 to 5 pin adapter as well as what I thought was a list of pins for the 5 pin MHL.
I'm really trying to be purposefully clear in this thread as to my findings because it seems there are too many vague threads out there regarding the functionality; simply missing a letter or punctuation in a thread can turn a sure thing into a vague post...
another avenue is the official samsung galaxy note 2 "smart dock" which has 3 usb ports, in additon to an hdmi output and charging input - since this is sold out in the US (and due to PAL vs NTSC Standard I am hesitant to order from germany) it'll be a while before I can personally buy and test one (unless i can find one locally somehow). this seems like the best bet for a dock which can be hacked or adapted to interface the s3 with the lapdock.
my ideal final outcome of this thread would be to have a small cable or interface box which i can plug into the s3 to enable hdmi output + usb otg + charging. that trifecta would connect via a single micro-usb to the device (11 pin) and have an output of a female usb (A or micro, either can be adapted) and either a male or female standard hdmi (again, both of which can be adapted). this cable could enable the phone to be used as an impromptu desktop, carputer, lapdock brain etc...
Lapdock software required...
Sent from my SGH-T999 using xda premium
deedscreen said:
Lapdock software required...
Click to expand...
Click to collapse
What do you mean by that?
The Atrix Lapdock is internally nothing but an 1366x768 HDMI LCD monitor with (rather poor) speakers and an USB-Hub on which a keyboard/touchpad and two free USB-ports are connected to. The monitor and the USB-hub have to be simply attached to any device which supports HDMI-output and USB-OTG via (slightly uncommon) HDMI- and USB-OTG-plugs.
There is no software running on the Lapdock (it is actually completely dumb) and there is no need for any specific SW on the connected device (might be nice to have something like webtop running but it is not necessary).
The S3 works flawlessly with the keyboard/touchpad/USB-hub using a USB-OTG-Adapter and with the HDMI-monitor via an MHL/HDMI adapter cable. The tricky part is only to get both simultaneously and possibly even charge the S3 from the Lapdock. For that purpose I use as long as there is no combined MHL-HDMI/USB-OTG-adapter/dock available (as described in the thread and page already indicated above: showthread.php?t=1741583&page=12 ) the allshare cast dongle and a cheap OTG adapter. You can use office apps, watch videos, play games etc. without any problem. You can check out
ecx . images-amazon . com/images/I/712%2BAbT1u3L.png
(no links for me yet)
to see how that looks like...
a32quaeler said:
What do you mean by that?
The Atrix Lapdock is internally nothing but an 1366x768 HDMI LCD monitor with (rather poor) speakers and an USB-Hub on which a keyboard/touchpad and two free USB-ports are connected to. The monitor and the USB-hub have to be simply attached to any device which supports HDMI-output and USB-OTG via (slightly uncommon) HDMI- and USB-OTG-plugs.
There is no software running on the Lapdock (it is actually completely dumb) and there is no need for any specific SW on the connected device (might be nice to have something like webtop running but it is not necessary).
The S3 works flawlessly with the keyboard/touchpad/USB-hub using a USB-OTG-Adapter and with the HDMI-monitor via an MHL/HDMI adapter cable. The tricky part is only to get both simultaneously and possibly even charge the S3 from the Lapdock. For that purpose I use as long as there is no combined MHL-HDMI/USB-OTG-adapter/dock available (as described in the thread and page already indicated above: showthread.php?t=1741583&page=12 ) the allshare cast dongle and a cheap OTG adapter. You can use office apps, watch videos, play games etc. without any problem. You can check out
ecx . images-amazon . com/images/I/712%2BAbT1u3L.png
(no links for me yet)
to see how that looks like...
Click to expand...
Click to collapse
Interesting..especially for the 89$ price tag. Long as one can deal with S3 not charging its a simple setup no ?
xManMythLegend said:
Interesting..especially for the 89$ price tag. Long as one can deal with S3 not charging its a simple setup no ?
Click to expand...
Click to collapse
Well, I got the Lapdock for less than 70 Euros and I think that is really great value since it is very well build and versatile... the allshare cast dongle is a bit overpriced (currently it is about 55Euros here) for an adapter-replacement but if you need it for different use cases (I mainly have it for a small LED-beamer) it might be worth it.
You can charge the S3 from one of the USB-ports of the Lapdock using a micro-USB cable (as long as the dongle or any other device is connected to the Lapdocks HDMI-plug - that is what signals the Lapdock to power up), but you can not simultaneously use the MHL/USB-OTG then. So it is nice for watching movies from your S3 on the Lapdock-screen (btw. the sound works fine as well) while re-charging the S3 but for "office" work with kb/touchpad you have to replug the OTG-cable. Actually I'm quite impressed with the relatively low power consumption of the allshare cast connection - so that is not a real problem IMHO. There might be people out there to solder the right resistors into OTG-adapter cables to allow both...
One disadvantage is obviously that you have this "bulky" (it is actually lightweight but still bigger than a simple adapter) dongle on the Lapdock. The big advantage over a dock is that you can more or less freely move around the S3 while using this combination.
deedscreen said:
Lapdock software required...
Sent from my SGH-T999 using xda premium because i'm a moron and don't know what i'm talking about
Click to expand...
Click to collapse
you obviously don't know anything about the lapdock, so please, hang around, do some searching and learn about what it is before posting vague comments that ruin the integrity of a factual thread.
xManMythLegend said:
Interesting..especially for the 89$ price tag. Long as one can deal with S3 not charging its a simple setup no ?
Click to expand...
Click to collapse
google 'bens outlet' (a 1saleaday company) and you can pick one up for as little as $50usd! assuming it actually ships out, but worth it for a spare monitor project at the very least... - and yes, not a hard setup at all - the first use in my mind would be just to have a full size screen on the go, however to have a cable capable of mhl/hdmi + usb otg + charging would turn the dock into a powerhouse android laptop using 4g internet etc... (it'll give the chromebook a run for it's money)
a32quaeler said:
the allshare cast dongle is a bit overpriced (currently it is about 55Euros here) for an adapter-replacement but if you need it for different use cases (I mainly have it for a small LED-beamer) it might be worth it.
Click to expand...
Click to collapse
what's this LED beamer? (i'm just intrigued)
a32quaeler said:
You can charge the S3 from one of the USB-ports of the Lapdock using a micro-USB cable (as long as the dongle or any other device is connected to the Lapdocks HDMI-plug - that is what signals the Lapdock to power up), but you can not simultaneously use the MHL/USB-OTG then. So it is nice for watching movies from your S3 on the Lapdock-screen (btw. the sound works fine as well) while re-charging the S3 but for "office" work with kb/touchpad you have to replug the OTG-cable. Actually I'm quite impressed with the relatively low power consumption of the allshare cast connection - so that is not a real problem IMHO. There might be people out there to solder the right resistors into OTG-adapter cables to allow both...
One disadvantage is obviously that you have this "bulky" (it is actually lightweight but still bigger than a simple adapter) dongle on the Lapdock. The big advantage over a dock is that you can more or less freely move around the S3 while using this combination.
Click to expand...
Click to collapse
all very cool - I'm thinking of ordering the allshare dongle just to try this out until the smartdock gets back in stock to hack it apart .. I'll probably order an 11pin mhl in the meantime too. I have a 5pin mhl, not sure what I can do with it without the adapter (i'll probably bundle it with my galaxy nexus and sell it all)
@a32: on a side note, i broke down and bought a Note 2 yesterday haha, so I'll probably be continuing this project with the Note2, (tmo just happened to have some in stock haha) I'm putting my week old S3 up for sale soon, but this project is still on my radar!
teshgnex said:
you obviously don't know anything about the lapdock, so please, hang around, do some searching and learn about what it is before posting vague comments that...
Click to expand...
Click to collapse
The S3 would need the lapdock .apk for certain functionality... calm down, I've owned enough Motorola Android devices to know what I'm saying...
Thats all... Ben's Outlet would be good plus All4Cellular sells it with the extenders...
Its out of stock now but you can get the extenders separately at a hefty price:
www.all4cellular.com/motorola-atrix-4g-laptop-dock-hdmi-upgrade-kit.html
The hefty priced cables are below, but it is worth the cost:
www.all4cellular.com/motorola-atrix-4g-upgrade-kit.html
deedscreen said:
The S3 would need the lapdock .apk for certain functionality... calm down, I've owned enough Motorola Android devices to know what I'm saying...
Click to expand...
Click to collapse
Sorry to snap, but if you've been on enough forums, you begin to notice that comments like yours are just add to confusion when unsubstantiated.
Any phone without a 'web top' mode or apk would obviously not work similar to the webtop mode that Motorola intended, however it'll still work, perfectly in fact, because this connection project is akin to hooking up your phone to a tv or monitor and using a usb mouse and keyboard to control it, albeit it's portable, like the padphone.
If you have any ideas as to how one could hookup both mhl/hdmi and usb/otg with charging I'm all ears (the real breakthrough would easily be seeing a US version T999 or similar running with the Smart Dock for the Note 2
Another thought to throw out there is whether this finished product could look similar to the padphone concept: a pocket for the phone to slip into, docking connector inside, basically self contained
As for those extension cables posted, places like monoprice and dealextreme have much better prices and selection, granted I'm just going those links on my phone - i don't understand how those are considered 'adapters' when all they do is extend the port
Sent from my SGH-T889 using xda app-developers app
Silly question but why would you need software when your using it as a monitor, keyboard, mouse, usb hub & charging?
djashjones said:
Silly question but why would you need software when your using it as a monitor, keyboard, mouse, usb hub & charging?
Click to expand...
Click to collapse
You don't.
... that's what we posted already. The webtop SW on some Motorola devices starts a specific desktop and window-manager on your phone when connecting to the lapdock. It may facilitate the use of the apps on the phone via the Lapdock (resolution/size/... of apps in windows etc.) but you do not need it to work with the S3 on the Lapdock.
awesome! im very tempted to get one but in the UK they are still expensive
teshgnex said:
what's this LED beamer? (i'm just intrigued)
Click to expand...
Click to collapse
A bit off-topic: It is an ACER C20 I own for nearly 2 years now. Like this one:
ecx . images-amazon . com/images/I/41aXbNerVoL._SL500_.jpg
It is out of stock anyway, but I could "partly" recommend it:
It has the size of a phone, a built-in battery and - most important - lots of inputs (mini HDMI (HDCP), D-Sub (24-pin Universal), Composite Video/Audio (2.5mm 4-pin mini jack), micro USB (Typ AB), micro SD Card (SDHC)) + Audio out & speaker. It plays media from internal storage/SD card but that internal media-player is crap. It is however extremely mobile and together with movie players on modern phones like the S3+cast-dongle - or any tablet with HDMI-out or a device with Composite A/V out (e.g. old Nokias) - a nice device e.g. to entertain kids on travel or showing pictures while visiting the grandparents or alike. On the other hand, it is not really bright at all (actually you have to be in a very, very dark room to use larger screen areas) and the battery lasts often only 1/2 hour (but you can charge it with 5V from USBs or use it while on the mains adapter).
It works really nice with the S3 + allshare cast dongle (that's what I bought the dongle for in the first place), has a descent image quality (848x480 pixel) and accepts up to 1080i HD over HDMI as input signal for downscaling but for the dongle the input is of course limited 720p. It does NOT work with the S3 using the cheap (chinese) USB-MHL/HDMI-adapter with the long red cables (somewhere discussed here as well) since that one provides 1080p30Hz (at least to my TV - on which it works) and the projector obviously can't sync to that.
Back to the topic: that cheap HDMI-adapter for S3 works not very well with the Atrix Lapdock; you get an image but it is vertically squeezed. Again: the Lapdock and the S3 + cast dongle go together extremely well.
That led projector sounds pretty cool, I've waffle'd on buying one various times but can't say I've had a particular need other than for the fun of it hah
a32quaeler said:
Back to the topic: that cheap HDMI-adapter for S3 works not very well with the Atrix Lapdock; you get an image but it is vertically squeezed. Again: the Lapdock and the S3 + cast dongle go together extremely well.
Click to expand...
Click to collapse
So I'm guessing you've tested this, but with the hdmi cable and the screen rotation turned on, the device still shows up in portrait? Unless I'm reading that wrong and you mean it's width wise video but looks like a 4:3 video on a 16:9 widescreen?
I wonder if that behavior is present with the official adapter...
So to return to the method of the allshare dongle, does it look like image 1 as i posted?
I recall you mentioned the dongle's hdmi signal is what triggers the docks micro usb port for kb/mouse control and charging, so for clarity i drew the wiring method up.
The next two wiring diagrams are what I'd expect to do as i finalize what the connection should/could look like...
I'm always in for feedback on streamlining the connections - the simple yet two part method will be just having the official smart dock, assuming it works with the s3, powered with one usb port, hdmi to hdmi mini and usb micro to the usb port, though maybe modify the output to delete charging power from the kb/m micro usb port...
Sent from my SGH-T889 using xda app-developers app
teshgnex said:
I recall you mentioned the dongle's hdmi signal is what triggers the docks micro usb port for kb/mouse control and charging, so for clarity i drew the wiring method up.
Click to expand...
Click to collapse
Sorry, don't have much time and will have a look at your drawings later... The presence(!) of a device connected to the HDMI is detected by checking for a "Ground"-connection of one of the HDMI-pins (from googling I remember it to be HDMI-DDC/CEC) - that's what powers up the Lapdock (and activates the USB-Ports). No need for an already powered device on that HDMI port. The problem is however that there are many HDMI adapters/extension cables out there which do not pass that specific wire/connection and then the Lapdock will not react when using those. There is however no need to buy these overexpensive Motorola cable sets (those prices are unbelievable!)... my adapters & cables cost in total about 9 Euros.
+5V on the OTG-USB cable from the peripheral device (=Lapdock) to the host is not "liked" by most hosts (the S3 did not really react on it but it is probably not a good idea anyhow) so I cut the 5V red wire of the micro-USB(female)-to-micro-USB(male)-cable. On the latter you need something to signal the S3 the OTG mode (pin 4 grounded to 5). I do that quite stupidly using additional USB->OTG-adapters but you would have to take care of that in your MHL/OTC combi adapter with resistors etc. anyhow.
The "chinese" Adapter is vertically squeezed. The S3 goes into the correct HDMI-out mode including the (stock) homescreen to be usable in landscape mode - that is not a problem. Probably the 1080p30Hz mode is not well understood by the Lapdock and/or the adapter does not correctly "negotiate" the right resolution-/display ratio with the display or the quality of the sync signal from the adapter is really bad. That chinese adapter is not too bad for Full-HD TV sets but unusable for anything else. I did not try the official one. The Lapdock works however well with the dongle.
This info is much appreciated. I took the dive and ordered a lapdock from bensoutlet.com for $50 to play with. The regular one is $60 - but the keyboard that adds Hebrew letters was $10 cheaper. I figure the lettering doesn't hurt anything so I'd rather save the $10.
If anybody figures out how to simplify the connections, or perhaps someday enable MHL out + USB host with this thing - please post back.
Right now - I spent an additional $6 on dealextreme.com to get a microHDMI (female) to HDMI male adapter, and a micro usb female to male adapter so I can try to use the keyboard.
The result is going to be pretty cluttered, but I figure $50 is cheap for a portable, self powered HDMI monitor that could also power stuff from it's ports.
teshgnex said:
The next two wiring diagrams are what I'd expect to do as i finalize what the connection should/could look like...
Click to expand...
Click to collapse
Your drawing No 1 is what I use (see below). No 2 is how it should be indeed (but where is the "modded cable" coming from?). While No 3 will not help you since only the presence of a shortened HDMI-CEC pin (+ opening the display a bit) will power ALL the USB-ports including U1+U2 (that activity mode of the Lapdock is indicated by a small white LED next to the touchpad) - so there is no "pre-power" available. But (again) anything that provides that ground contact on the HDMI-plug will do the trick... I actually have one 90degree HDMI-adapter (don't know how to call it in English), which does exactly that and shortens those pin(s) and simulates to the Lapdock the presence of a device (I assume that is NOT on purpose but it works with a second, identical adapter as well). Don't take me wrong you do not need that one if you conect a device (any) directly to the microHDMI-to-HDMI adapter but it is needed when you use HDMI extension cables (etc.) that do not pass all wires to the HDMI device.
I attached some pics how I wire that thing. Pic 1: the micro HDMI plug on the Lapdock is turned by me by 180deg just to make a bit more room for the microHDMI(fem)toHDMI(male)-adapter. You may directly attach the dongle to it (it is relatively stable and easy to carry around - pic 2). That's what one could call "entertainment mode" since you may want to watch videos etc. this way. But than you have not enough space for the microUSB-cable for kb/mouse. That is what I use the 90deg-adapter for. This adapter alone signals already the Lapdock to power up (no other HDMI-cable or adapter I own does this). Back to pic 1: The microUSB(fem)-to-microUSB(male)-cable has the red 5V wire cut. The microUSB-to-USB + USB-microUSB-OTG(!) adapter is there only to signal the OTG-host mode for the S3. The stuff on the right are things you may use on the free USB-port.
That strange device with the mobile speaker attached to its headphone jack has to be explained: it is a (5 Euro) "USB sound card". That is a bit odd... the Lapdock has stereo speakers which are working well (but not great) and the audio-output via HDMI(cast) to the Lapdock works perfectly (sound is ok and in sync when watching videos & you can control volume etc. from the S3 or the Lapdock keyboard) but the allshare cast SW on the S3 does not allow you to plug in a headphone or connect a bluetooth audio-device to the S3 for output of the video(!)-sound. You can use headphones for mp3-player music while using an HDMI display etc. but when you switch on a video you have to remove headphones otherwise the allshare connection stops. There might be two reasons 1: HDCP, 2: there is a small lag in video display from the wireless transfer protocol and the audio stream is equally lagged on purpose to be well in sync with the video stream. You may want to bypass that artificial restriction because the Lapdock has NO headphone jack ... and you can by using such a "soundcard" which is fully supported by the S3 but the sound is then indeed a bit "in advance" of the video stream.
Less exotic devices you can attach are external disks/pen drives or even game controllers (all of them work)... Pic 3 shows you how I wire it for "productivity mode"
P0ll0L0c0 said:
This info is much appreciated. I took the dive and ordered a lapdock from bensoutlet.com for $50 to play with.
Click to expand...
Click to collapse
Thank you. 50$ ! When they are as cheap go and get some (or better get many)! The Lapdock is really, really useful and works with many devices.
I originally bought it for the Raspberry Pi but I use it as well with an Archos A80G9 android tablet (not so often since the tablet is big enough anyhow) which has seperated (mini)HDMI and USB-OTG connectors (as it should have been done for all mobile devices including the S3) and used it for my "old" Nokia N8 (miniHDMI as well). In that case USB-OTG does not work since the N8 does not support USB hubs but you can chrge it and watch movies on the Lapdock display with it (in the train ...). The RasPi is powered via the same cable that is used for kb/mouse. In that cable I did obviously not cut the 5V wire. The power the Lapdock provides this way is sufficient to operate the RasPi (+ wifi dongle) ... about 1A is needed for that. So it should be possible to use that power via that OTG microUSB port for the S3 as well ...
What abot the EDD-S20E dock won´t that work with the lapdock ???
Problem is the dock is useless for my next device in 2 - 3 Years....
The allshare cast dongle might stay usefull even with the next gen of android phones....
so, anyone taken apart an MHL adapter yet?
i have a sneaking suspicion, that the move to an 11 pin is what will allow BOTH OTG, and MHL at the same time, but i could be wrong.
look inside your USB port on the bottom of the S3...
whatya see?
the normal 5 pins on the USB part.. but what is that in back wall? THE OTHER 6 PINS!
yep, that is why you cannot plug the MHL adapter into a hub or anything.. there is 6 pins are missing.
Now, i am wondering:
has anyone taken it apart to see if the 6 pins are used alone, or if it uses the the USB also?
if it uses only the 6 pins for MHL-ness, then it should more than possible to make an OTG/MHL adapter/dock.
more thought says, if my theory is right, an 11 pin to 5 pin conveter may be the key.. and an otg can be spliced in to give 2 outputs: MHL in one (using an s2 MHL adapter) and OTG in the other.....
anyone wanna tear their adapter up? or are you guys gonna make me spend some money?
I ran across this post looking to see if anyone has done this yet. I am going to try to grab the 5 to 11 tomorrow and tear it apart (since it's the cheaper adapter). My plan was to rip it apart and if the original 5 pins are available, splice just as you mentioned.
I can't find a decent picture of the microUSB plug to see if all pins are there.
Also I found this:
http://homixtech.en.alibaba.com/pro...Galaxy_S3_11pin_To_Micro_USB_5pin_Gender.html
Which makes me think 11 pin microUSB plugs that work are available out there somewhere.
cmbg78 said:
I ran across this post looking to see if anyone has done this yet. I am going to try to grab the 5 to 11 tomorrow and tear it apart (since it's the cheaper adapter). My plan was to rip it apart and if the original 5 pins are available, splice just as you mentioned.
I can't find a decent picture of the microUSB plug to see if all pins are there.
Also I found this:
http://homixtech.en.alibaba.com/pro...Galaxy_S3_11pin_To_Micro_USB_5pin_Gender.html
Which makes me think 11 pin microUSB plugs that work are available out there somewhere.
Click to expand...
Click to collapse
I wait with baited breath... i REALLY think this is what is going on.
cmbg78 said:
I ran across this post looking to see if anyone has done this yet. I am going to try to grab the 5 to 11 tomorrow and tear it apart (since it's the cheaper adapter). My plan was to rip it apart and if the original 5 pins are available, splice just as you mentioned.
I can't find a decent picture of the microUSB plug to see if all pins are there.
Also I found this:
http://homixtech.en.alibaba.com/pro...Galaxy_S3_11pin_To_Micro_USB_5pin_Gender.html
Which makes me think 11 pin microUSB plugs that work are available out there somewhere.
Click to expand...
Click to collapse
So, did you do this experiment? Has anybody found a way to get access to all of the pins and make OTG work with MHL?
I've been waiting for two months for an answer about this. I'm glad someone started a thread. I kind of have this hesitation to start new threads.
I would love it if this could be integrated with the seidio active dock.
Sent from my SPH-L710 using xda app-developers app
nightwinn said:
I've been waiting for two months for an answer about this. I'm glad someone started a thread. I kind of have this hesitation to start new threads.
I would love it if this could be integrated with the seidio active dock.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I decided to take the plunge.... and have ordered a part to slice open. will update.
scarrmrcc said:
I decided to take the plunge.... and have ordered a part to slice open. will update.
Click to expand...
Click to collapse
Thanks bro!, Ive been searching for the answer to this awhile as well.. I wonder not many people have brought this up. Ideally I would love to use my S3 as a "PC".
Check this out: http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Edit: On another thread someone posted that they connected the USB OTG cable to the Micro USB port on the MHL adapter with no luck..hmm
romulusram said:
Thanks bro!, Ive been searching for the answer to this awhile as well.. I wonder not many people have brought this up. Ideally I would love to use my S3 as a "PC".
Check this out: http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Edit: On another thread someone posted that they connected the USB OTG cable to the Micro USB port on the MHL adapter with no luck..hmm
Click to expand...
Click to collapse
meh, I think that is wrong. many people have done exactly what it says you can do, and it doesn't work.
Makes me wonder if the boys at Samsung made a press mistake. If indeed you can't use both with the correct cable, then why make a port with 11 pins? Seems a waste of resources to me.
nightwinn said:
Makes me wonder if the boys at Samsung made a press mistake. If indeed you can't use both with the correct cable, then why make a port with 11 pins? Seems a waste of resources to me.
Click to expand...
Click to collapse
I have never seen anything from samsung saying that MHL and OTG was possible.. just speculation in websites.
It better be possible because if not all Samsung's managed to do is make us buy hugely overpriced new MHL cables when they could have kept the old type, but I guess Samsung's made some decent money giving people no option but to buy £30 MHL cables.
I hope Monoprice really is working on a cable. 35-40 USD is more than I want to pay, especially if I get a couple and/or an HDMI dock.
Geordie Lad said:
It better be possible because if not all Samsung's managed to do is make us buy hugely overpriced new MHL cables when they could have kept the old type, but I guess Samsung's made some decent money giving people no option but to buy £30 MHL cables.
Click to expand...
Click to collapse
+1
Sent from my GT-I9300 using XDA
neiliewheeliebin
Both the oem adapters are missing 2 data pins within the plug needed for simultaneous usb connectivity with mhl,I've ordered a Chinese alternative that I'm hoping will have all 11 pins,I'll report back If I have any success
neiliewheeliebin said:
Both the oem adapters are missing 2 data pins within the plug needed for simultaneous usb connectivity with mhl,I've ordered a Chinese alternative that I'm hoping will have all 11 pins,I'll report back If I have any success
Click to expand...
Click to collapse
gracias amigo.
when you get 10 posts, so you can post links, can you come back and post what you got? then I shall order a different one.
we will find the perfect cable.
neiliewheeliebin said:
Both the oem adapters are missing 2 data pins within the plug needed for simultaneous usb connectivity with mhl,I've ordered a Chinese alternative that I'm hoping will have all 11 pins,I'll report back If I have any success
Click to expand...
Click to collapse
Someone needs to find the resistor values first so the phone can use both simultaneously if it's even possible that is.
Geordie Lad said:
Someone needs to find the resistor values first so the phone can use both simultaneously if it's even possible that is.
Click to expand...
Click to collapse
that would be key. I have sent out messages to people that may know, or may be able to find out, but i have not had success.
heck, If it can be done in the terminal (turning on items) i can make a shortcut that would do it.. but i have had no success with that either.
It's not possible I think.
You can use an MHL enabled tv wich powers MHL, (so you don't need the adapter) but how do you want to split that?
You can split the cables from the samsung adapter, so you have the MHL ones(6) and the usb ones(5).
But what then?
You need to connect the MHL ones to an hdmi cable, and connect it with an MHL enabled tv. And the usb ones to an usb port for OTG.
But will that even work with this S3?, because it is designed to get power from your charger via the extra usb port on the adapter.
Maybe it only works with the adapter, and not even with an MHl enabled tv...
I think somebody needs to connect the S3 to an MHL enabled tv, if that works you can modify the adapter and use the usb as OTG.
Send from my GT-I9300 with Tapatalk
Jeurum_92 said:
Values are already figured out, but both MHL and usb output at the same time is not possible I think.
You can use an MHL enabled tv wich powers MHL, (so you don't need the adapter) but how do you want to split that?
You can split the cables from the samsung adapter, so you have the MHL ones(6) and the usb ones(5).
But what then?
You need to connect the MHL ones to an hdmi cable, and connect it with an MHL enabled tv. And the usb ones to an usb port for OTG.
But will that even work with this S3?, because it is designed to get power from your charger via the extra usb port on the adapter.
Maybe it only works with the adapter, and not even with an MHl enabled tv...
I think somebody needs to connect the S3 to an MHL enabled tv, if that works you can modify the adapter and use the usb as OTG.
Send from my GT-I9300 with Tapatalk
Click to expand...
Click to collapse
I found (and shared) the MHL value, and we already know the OTG value.. but it only seems logical there is ANOTHER value to activate both at the same time. we are postulating, the the reasoning behind the 11 pin, is to allow both. If adding just an OTG cable turned on MHL too, it would cause issues without an MHL connection. and the same with MHL activating OTG, without an OTG device connected. like i said, this is postulation at the moment, but there SHOULD be a thrid value to enable both at the same time. that value would be used by a future peice of hardware that does a whole "PC MODE".
and if it does not exist, it CAN be done, we just need more "stuff" a way to enable a special switch if you will.
some people are saying you can connect straight to an MHL enabled TV, but that has not been done yet (and since there are no 11 pin MHL cables, that are not adapters, it seem unlikell that anyone will until said cable exists. the S3 cannot send MHL signal over the usb part, it has to be either the extra 6 pins, or with the 11 to 5 pin adapter.)
essentially, the pins are there, and with some special software, or a hidden resistor value as to yet, unfound, and some custom hardware (as of now NOTHING 11 pin, has 11 pins in it) it SHOULD be possible.
but there is nothing that has been found (hardware wise) that is even modifyable to work.... yet.
What I don't understand, why does MHL only work with the power connected?
They could easily make an MHL cable with the 11 pin, and hdmi. That should work for only MHL.
Only no go I can think is that MHL drains your battery because of always having your screen on, and the MHL output.
So they decided to use the adapter with power, otherwise you can't use MHL feature very long before your battery is empty
I think inside the adapter they only use the pins for giving power, and not the full 5 pin support for OTG, and therefore OTG doesn't work when you want to connect something.
Inside the ROM they have maybe build in something that MHL will only work when power is connected.
Maybe the solution is very simple,modify the adapter so full 5 pins are connected.
after searching a little bit about 11 pin port in galaxy s3 and take apart an 11pin to 5 pin adapter i am thinking about make DIY smart dock for galaxy s3
i ordered mhl adapter and waiting for it mean while i tried to connect usb otg and extra micro usb connector together so i can use otg and charge the phone at the same time. but the problem is when i short ground and seance pin for otg ; charging doesn't work.
so any suggestion about the project?
i attached a plan of my project here
edited:after failing my 1st attempt i succeeded to make it work on my 2nd try!
this time i opened a 11 pin to 5 pin adapter. it has a small resistor which is connected ground to sense pin for hdmi out put. i removed that resistor and i connected 5 extra wire in the adapter 1. vcc 2. data+ 3. data - 4. sense 5. ground ( i showed in picture) . then i connected sense and ground with a 40.2k resistor.
then the 4 wire, which i i connected in 11 to 5 pin adapter (vcc, data+,data-, and ground) , goes to a femele usb where you will connect usb devices or usb hub.
and thats it!! hope you can try it too. if if have any other question just ask me
http://www.youtube.com/watch?v=EFzX6NlKJBU&feature=youtu.be
if anyone want to donate to help me with more projects click the link below
https://www.paypal.com/cgi-bin/webs...&bn=PP-BuyNowBF:btn_buynowCC_LG.gif:NonHosted
AW: diy smardock for galaxy s3
You forgot the vcc at the otg side, but anyway it can't work.
While charging you send 5v through the micro usb to the phone.
But in otg mode the phone will send 5v to the usb connector to supply power for the connected device.
I think your only chance is to use the inductive connectors to charge your phone while in otg mode.
Sent from my GT-P5110 using xda premium
i uploaded the corrected one
and i found this
http://forum.xda-developers.com/showthread.php?t=1953061
but my knowledge about this stuff is little low. so need some explanation
thanks
AW: diy smart dock for galaxy s3
There seems no way like you want it. I told you the problem.
You have to use the Pins for the wireless charger (QI-charger) under the battery cover.
Sent from my GT-P5110 using xda premium
G4Cab said:
There seems no way like you want it. I told you the problem.
You have to use the Pins for the wireless charger (QI-charger) under the battery cover.
Sent from my GT-P5110 using xda premium
Click to expand...
Click to collapse
charging via the back pins while in OTG mode with throw a message popup that says over current protection and shuts down the S3
at least it does on mine.
I have the smart dock and after opening, it does contain quite a bit of electronics
NuclearEMP said:
charging via the back pins while in OTG mode with throw a message popup that says over current protection and shuts down the S3
at least it does on mine.
I have the smart dock and after opening, it does contain quite a bit of electronics
Click to expand...
Click to collapse
would you mind taking a few pictures of the smartdock guts so the rest of us tech savvy people can drool at its wonders?
here is a few of the Note 2 Smart Dock internals
NuclearEMP said:
here is a few of the Note 2 Smart Dock internals
Click to expand...
Click to collapse
you frelling rock!
---------- Post added at 12:28 PM ---------- Previous post was at 11:59 AM ----------
I have a suspicion that the IC to the left of the Realtek one is the brains of the board. The RT chip does the hdmi out conversion and the other two longer IC's are usb host and usb audio. Can't make out the printed data on the unknown chip, but my best bet is if we can get a dump of whats on there then we might have a good chance of DIY hdmi/otg capabilities. i'm no expert by far, but just throwing ideas out there.
wolfy02 said:
you frelling rock!
---------- Post added at 12:28 PM ---------- Previous post was at 11:59 AM ----------
I have a suspicion that the IC to the left of the Realtek one is the brains of the board. The RT chip does the hdmi out conversion and the other two longer IC's are usb host and usb audio. Can't make out the printed data on the unknown chip, but my best bet is if we can get a dump of whats on there then we might have a good chance of DIY hdmi/otg capabilities. i'm no expert by far, but just throwing ideas out there.
Click to expand...
Click to collapse
Heres whats inside, including the "other chip"
SiI9292 MHL-to-HDMI Bridge
The SiI9292 is integral to the design of low-power, MHL-to-HDMI accessory devices such as docking stations, converters and adapters, enabling HD video and audio connectivity between MHL-ready mobile devices and HDTVs with HDMI inputs.
-------------------------
Realtek RTD2120
Overview
This chip is the micro-processor of LCD monitor. It uses the design ware DW8051 of Synopsys as the 8051 core of this chip and is compatible with other industry 8051 series. Also, 96Kbyte FLASH with 8 bit bus is embedded in this chip which is licensed from TSMC 0.18um e-FLASH process. Here we use the package of PLCC44/LQFP48 if we would like to have a discrete MCU controller or we make a multi-chip package with our LCD monitor controller to form one chip package to save the cost of package and PCB material.
Features
? Operating voltage range : 3.0V to 3.6V
? 8051 core, CPU operating frequency up to 50MHz
? 4 clocks per machine cycle
? 256-byte internal RAM
? 512-byte external data RAM, including 256-byte DDC RAM(128-byte x 2) and 256-byte general purpose RAM
? 96K-byte flash memory, 64k for program and 32k for saving parameter
? Two DDC ports compliant with VESA DDC1/2B/2Bi/CI
? Three channels of PWM DAC with programable frequency from 100K to 100Hz
? Watchdog timer with programmable interval
? Three 16-bit counters/timers (T0, T1, and T2)
? One PLL to provide programmable operating frequency and clock output, 2 clock output ports
? One full-duplex serial port
? Six interrupt sources with 2 external interrupts
? Four channels of 6-bit ADC
? Hardware In System Programming(ISP) capability, no boot code required
? Built-in Low voltage reset circuit
? Embedded 1.8V regulator
? Code protection
? Available in 44-pin PLCC or 48-pin LQFP package
----------------------------
FE1.1S
USB 2.0 HIGH SPEED 4-PORT HUB CONTROLLER
--------------------------------------------------
The PCM2704/5/6/7 is TI's single-chip USB stereo audio DAC with USB-compliant full-speed protocol controller and S/PDIF.
-------------------------------------
otg + charging success
hi guys! just want to give an update of my work.
i got otg and charging work together.
as in this post http://forum.xda-developers.com/showthread.php?t=1953061 i just connect ground and sense pin with a 40.2 k ohm resistor.
i ordered 40.2 k ohm resistor which i just got tonight. the hdmi adapter i have is a cheap and old one. its not mirroring the screen. i ordered a new Rocketfish MHL HDTV Adapter . hope that will work!! waiting for that to arrive!!!!
here i am giving 2 screen shot
mess lol
and here what i did so far....
i didnt connect micro usb female port for data sync because those i didnt get yet.
if anyone have any suggestion please tell me.
hoping to make it work.....
necomer said:
and here what i did so far....
i didnt connect micro usb female port for data sync because those i didnt get yet.
if anyone have any suggestion please tell me.
hoping to make it work.....
Click to expand...
Click to collapse
Great work, necomer. I've also been trying that for two months now, but haven't been able to make it work. I have the 40,2 KOhm resistor between sense and GND, and am able to launch smart dock mode on some ROMs I have tried. So, which ROM are you running? My only idea here is that maybe you having a US S3 is what does the difference (well, I'm assuming that, maybe you have an international one).
Thanks in advance, and once again, great work :good:
Hi. Thanks for reviewing I am using us galaxy s3 and just the stock touch wiz rom android 4.1.1.
And I received my mhl adapter. But when I am connecting it the tv screen going all black. Any suggestion about that?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
necomer said:
Hi. Thanks for reviewing I am using us galaxy s3 and just the stock touch wiz rom android 4.1.1.
And I received my mhl adapter. But when I am connecting it the tv screen going all black. Any suggestion about that?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I'm pretty sure your buying the wrong MHL adapter. The Note II and the s3 have a different micro usb than any other phone and require the samsung
MHL adapter.
Not sure what you are trying to do?
Amazon sells a combo cable so you can use OTG and charge the device at the same time. I use it to connect a 1TB portable drive to my S3 and Tab 2 10.1.
I bought the official Samsung HDMI adapters for both devices. They are powered and stream over HDMI to my TV just fine. Works with just about everything I've tried although some services require some workarounds. Copy protection crap.
What you are trying to do sounds risky. You might fry the phone.
I apologize if I haven't grasped your intentions but I'm kind of slow.
Edit: I think I may get it now. Are you trying to power, feed external data through OTG and then stream out to an HDMI display?
Dumb question as I said I'm slow but, how about the official Samsung HDMI adapter and use the power in port with a powered OTG combo cable?
This one:
http://www.amazon.com/gp/product/B003WV5DMO/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
Logunn said:
I'm pretty sure your buying the wrong MHL adapter. The Note II and the s3 have a different micro usb than any other phone and require the samsung
MHL adapter.
Click to expand...
Click to collapse
i used a 11 pin to 5 pin convertor. but i guess i did something wrong while connecting the wires .
i will order new 11 pin to 5 pin adapter bcz i messed up this one
schneid said:
Not sure what you are trying to do?
Amazon sells a combo cable so you can use OTG and charge the device at the same time. I use it to connect a 1TB portable drive to my S3 and Tab 2 10.1.
I bought the official Samsung HDMI adapters for both devices. They are powered and stream over HDMI to my TV just fine. Works with just about everything I've tried although some services require some workarounds. Copy protection crap.
What you are trying to do sounds risky. You might fry the phone.
I apologize if I haven't grasped your intentions but I'm kind of slow.
Edit: I think I may get it now. Are you trying to power, feed external data through OTG and then stream out to an HDMI display?
Dumb question as I said I'm slow but, how about the official Samsung HDMI adapter and use the power in port with a powered OTG combo cable?
This one:
http://www.amazon.com/gp/product/B003WV5DMO/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
what i am trying to do is, use otg , charge the phone and use hdmi at the same time. i thought it would be easy bcz samsung made new 11 pin connector in Galaxy s3 . so apparently its supposed to work ,as they are not using same pin for transferring data. But i dont have any idea about internal proses. while charging and otg at the same time is possible, dont you think we can connect hdmi with it in any way?
well all this is just guessing from my little knowledge. i want some suggestion from those who worked on this and correct my mistakes
necomer said:
Hi. Thanks for reviewing I am using us galaxy s3 and just the stock touch wiz rom android 4.1.1.
And I received my mhl adapter. But when I am connecting it the tv screen going all black. Any suggestion about that?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Maybe... it's a HDCP problem...
If your TV don't support HDCP function(or authentication failed), then MHL chipset will show a black screen
(HDCP : High-definition Digital Content Protection)
I was going to this topic, being all hopeful that I finally might get my S3 in OTG+Charge mode. And then it turned out it only worked on a phone still running 4.1.1. I have 4.1.2, and OTG+charge did work for me before, but it seems Samsung broke it in 4.1.2. It is probably the fault of the kernel that came with the XXELLC (a stock 4.1.2 ROM) update, but how to fix it is beyond me.
Are you serious! I won't update mine then. I need to use that together! !!
Thanks for the information
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hi. So I found this cable for the Note on eBay.
It seems a good item because it doesn't require the adapter or external power. Has anyone tried it, or is it more worth while to go for the original adapter? TIA
Gigarant said:
Hi. So I found this cable for the Note on eBay.
It seems a good item because it doesn't require the adapter or external power. Has anyone tried it, or is it more worth while to go for the original adapter? TIA
Click to expand...
Click to collapse
I'm not sure why you'd want one without the usb cable for power though, cuz if you're outputting your display to your TV then it's going to drain a lot of power.
Unless you only want to show say a picture, or a short video it might be okay, but if you want to output say a whole movie, you're going to want to provide your phone with power at some point.
I've recommended an mhl cable in the past. It might suit you if you're looking for a nice, compact cable with hdmi and usb (for power).
But if you're dead against one with a power cable then feel free to give your linked one a try and report your findings.
little-vince said:
I'm not sure why you'd want one without the usb cable for power though, cuz if you're outputting your display to your TV then it's going to drain a lot of power...
Click to expand...
Click to collapse
Yeah, but i got the impression it would draw power from the TV by itself. I may be wrong about that...its not that I'm dead against a cable that needs power, more that I'm thinking about portability and something to add a bit more value should I ever sell the Note. And admittedly for the last one a genuine OEM adapter would be the best option, but they are gorram expensive.
Considering I have to buy an HDMI cable for my laptop, I might try a generic adapter, see how that works, and then try this cable if I have the spare cash in the future.
Hi,
So I have an update for this; recently I bought one of the cables as above out of curiosity, and surprise surprise... It didn't work. When I connected the Note to the TV with it, it just flashed up 'USB connected' and then 'USB not connected' in the status bar. This is because of the obvious reason; that you need a conventional adapter with a USB-connection for external power. Also, the seller of this cable claimed that the TV in question needs to be MHL (not just HDMI) compatible for it to work. So essesntially you do in fact need a conventional Samsung (or generic copy) 5-pin HDMI adapter to get your Note's display on your TV.
I think that resolves the question. Oh, one more thing: you need a TW-based ROM for HDMI connection. Don't forget...