I want to get a dock however if it means having to take it out of the case everytime I don't see the point, which are compatible with the Official case?
Looking good, are they available in the UK? can't find anything for them on google.
Not sure if this fits the build but also posted else where in this forum.
http://www.mobilefun.co.uk/samsung-...rging-cradle-p29888.htm?referer=aff_aw_102463
Related
I know the Car Dock comes with an insert for the phone if you do, or don't have a case on it. Confirmed today that the laptop dock does too. I assume that all the docks have this, but haven't seen an entertainment dock or standard dock. If anyone can confirm with pics, it would be greatly appreciated. Here's the laptop dock one in pics attached to this post.
link12245 said:
I know the Car Dock comes with an insert for the phone if you do, or don't have a case on it. Confirmed today that the laptop dock does too. I assume that all the docks have this, but haven't seen an entertainment dock or standard dock. If anyone can confirm with pics, it would be greatly appreciated. Here's the laptop dock one in pics attached to this post.
Click to expand...
Click to collapse
I don't have pics but the Multimedia dock and Standard dock are the same way
I've got the MM dock and the car dock, and have played with the charging and LT docks in store. All have the little panel that pops out. The speck sorta works with the MM, charging, and LT docks, but not at all with the car dock. I now have the feather, which works with all 4.
I have the BodyGlove case from AT&T, and it works great on the laptop and car dock.
Son of a mother f*cking b*tch!!!!!! I already sent back my standard dock!!!!!!!!!
I have a Otterbox Commuter case, do you think that it would fit with the insert removed? The micro plug was really close to getting there, just couldn't make it work.
I know that even with my thin Body Glove case, the phone wouldn't even think of fitting in the laptop, but with the insert out, fits with ease. Could work fine, but I haven't dealt with the Commuter case yet.
link12245 said:
I know that even with my thin Body Glove case, the phone wouldn't even think of fitting in the laptop, but with the insert out, fits with ease. Could work fine, but I haven't dealt with the Commuter case yet.
Click to expand...
Click to collapse
*hitting head on desk*
I hate you... thanks for the info. guess I might re-order and give it a try.
*light bulb above head*
Wait a minute... I'll run down to the local AT&T store, they always have the Atrix in the Multimedia dock (same dimensions as the standard dock). I'll pop out the insert there and see if my case will fit.
Swiftks said:
*hitting head on desk*
I hate you... thanks for the info. guess I might re-order and give it a try.
*light bulb above head*
Wait a minute... I'll run down to the local AT&T store, they always have the Atrix in the Multimedia dock (same dimensions as the standard dock). I'll pop out the insert there and see if my case will fit.
Click to expand...
Click to collapse
Yep, my store didn't get the multimedia dock, just the laptop dock. We haven't recieved the otterbox defender in either, only seen them online. Best of luck, let us know what you find.
Well, no dice with the otterbox commuter case... I went to the local AT&T store, took the insert out of the standard dock, and the micro adapter still wouldn't reach. You should have seen the look on the dumb ass sales persons face... haha priceless.
I'm also assuming the otterbox defender case will not work either, as it is larger than the commuter case. Thanks anyway, still good info. to know.
Well I hope I'm not a thread-killer as I posted this several days ago in another thread and never had any comments on it...
I searched around on many forums but found no discussions about the "larger case" insert documented in the manual, at least for the Multimedia dock.
It's listed in the manual as part number SJYN0722A. The manual indicates that it is included when purchasing the dock and is for use with a "ruggedized" case. This is also referenced at Motorola's FAQ on accessories for use with a "2 shot battery door fit plate", whatever that is/was.
The insert that is being removed is part number SJYN0723A.
Anyone have this 22A insert or know anything about it? Was it discontinued before the docks were even released?
I have the Incipio Feather case and have removed the insert as discussed to use it in the Multimedia dock. It works, but does not physically support the phone at all as others have mentioned.
Thanks!
flexpackman said:
Well I hope I'm not a thread-killer as I posted this several days ago in another thread and never had any comments on it...
I searched around on many forums but found no discussions about the "larger case" insert documented in the manual, at least for the Multimedia dock.
It's listed in the manual as part number SJYN0722A. The manual indicates that it is included when purchasing the dock and is for use with a "ruggedized" case. This is also referenced at Motorola's FAQ on accessories for use with a "2 shot battery door fit plate", whatever that is/was.
The insert that is being removed is part number SJYN0723A.
Anyone have this 22A insert or know anything about it? Was it discontinued before the docks were even released?
I have the Incipio Feather case and have removed the insert as discussed to use it in the Multimedia dock. It works, but does not physically support the phone at all as others have mentioned.
Thanks!
Click to expand...
Click to collapse
Not killing the thread at all, more info is always welcome. I would assume that the other part number is just the dock connector with no insert on it.
Sorry to double post if you already put this up, hadn't seen anything and it was cool to find out.
Thanks link12245
The manual specifically speaks to two inserts. One for just the phone and one for "over-sized" cases.
I guess that it never made it to production and Motorola didn't change the manuals....
motorola forgot to add the plate
i spoke to motorola support @ 800-734-5870, they acknowledged that the plate (part #: SJYN0722A) should have been included. they will refund the full amount for the dock & advised me to repurchase it online. the newer docks now includes this part.
atrixhack said:
i spoke to Motorola support @ 800-734-5870, they acknowledged that the plate (part #: SJYN0722A) should have been included. they will refund the full amount for the dock & advised me to repurchase it on-line. the newer docks now includes this part.
Click to expand...
Click to collapse
Thanks!
I was going to call support, but thought I would ask around first.
I purchased this from Amazon and got it last week. I'll see if they have new stock for a return and/or give Motorola a call to see if I can find out who has fresh stock that has the insert.
Anyone know of a good one? Just started road biking and I'd like to be able to have my GPS and Pandora and stuff within view. Can anyone suggest a good one?
Thanks.
Glacier running on Faux's AOSP
It probably wouldn't be that hard to make one, just do a google search on homemade holders or see what others say on google, heres a good start
http://www.extremepda.com/T-Mobile-myTouch-4G-Bicycle-Motorcycle-Handlebar-Phone-Mount_p_1910.html
Also check this tread out http://forum.xda-developers.com/showthread.php?t=1040111
P.S I may buy sumthing like this also, thanks for the idea
i like that sealed waterproof one but when i got to the ultimate addons website i cant find it anywhere. actually i dont see any cell phone cases at all
A belt holster is under $10 on ebay or Amazon. Zip tie to your handlebars or neck.
Found this on a deals type website I often visit. It says its compatible with the Mytouch 4G. I cant comment on it personally though... Hope its still in stock by the time you see this message lol.
http://cgi.ebay.com/Universal-Bike-...sid=p1468660.m2000037&clk_rvr_id=238171356185
Been looking for a desktop dock for a while. Only one I could find was a generic micro usb dock. Anyone know of a specific ET4G dock?
The Official One from Samsung...
can't post the link, but if you go to Samsung.com and find the links for phones/sprint/E4GT/Accessories, you will see it.
Oh it's the same dock I saw but from a generic distro. These docks never account for additional space for a case. Since I never take my phone out of my case, it prob won't fit.
I completely agree with you about the docks leaving no space for a case. That's my concern as well. What about the docks by Sinjimoru Sync? I didn't know they existed until GooseChaser posted it in the other thread:
http://forum.xda-developers.com/showthread.php?t=1266005
I think the best option for people that use cases is to get a generic micro usb dock from a generic distro. Make sure it's a little bit bigger than your phone. Then use styrofoam or rubberized material with one side stick and adjust the depth for the phone.
Anyone know of any cases with Credit Card or ID Card Holder ??? I found some made by Case Mate but it's only for iPhone 3G/3GS/4.
Thanks in advance for any assistance on this.
I've been looking for one for any phone other than the iPhone for months and I haven't been able to find anything. I even emailed case mate about it and they never responded.
Sent from my SGH-T989 using XDA App
http://www.pdair.com/catalog/product_info.php?cPath=11000365_11000372_11001355&products_id=34089
maybe does not look as good but....
I finally found something worth getting. I just ordered one. Also work on just about any phone.
Since I can't post links I will direct everyone on how to get there.
Go to Amazon and search for Sinji Pouch
AgentVash said:
I finally found something worth getting. I just ordered one. Also work on just about any phone.
Since I can't post links I will direct everyone on how to get there.
Go to Amazon and search for Sinji Pouch
Click to expand...
Click to collapse
http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias=aps&field-keywords=Sinji+Pouch&x=0&y=0
This is all I can find. its not for our galaxy S2 though. its meant for the international version
edit: I didnt look close enough at the it. I guess the "case" is a just a sticker so in theory it should still work?
I have that pouch. The part of the phone at the bottom that curves up makes it so when you put the pouch on... It's not flat.. So the end doesn't stick down well. However, it works for me until they release a good looking case with an ID holder... Hopefully something like the twelve south iphone case. Here's a pic that sorta shows you what I'm talking about
Obviously Samsung is more well known, but has anyone heard of EZOPower. They have the exact Dual Case comp dock, they look almost alike except for labeling. Is it as good
which to go for? it is only 19 compared to $27
Thank YOu
This dock?
Jaxidian said:
This dock?
Click to expand...
Click to collapse
Thank you very much I guess I was wrong I have found that post but I was wondering which 1 is better.
eric0668 said:
Thank you very much I guess I was wrong I have found that post but I was wondering which 1 is better.
Click to expand...
Click to collapse
Since all this is is a charging dock, there is little for it be "better" or "worse". Essentially, all it is is a USB cable, with large head. personally i would go for the cheap one. If you were looking at a multimedia dock, it would be different.
personally, i would go for the hyperion one (also on amazon, and I cannot post links, yet because new members aren't allowed to help people directly, so you have to search for it) and save 2 bucks more.
thanks again
I found it. I had a bad experience with the wall chargers from them One didn't work. took awhile to get a refund
It looks ok tho.
1. It looks case compatible, don't you think?
2. The title says GS3, but the description says Galaxy Note. I do think it is for the S3
3. I did find the Kidigi which is more than that, the original Samsung, or the EZOPower, the Deluxe Piano Black Charging Cradle Dual Purpose Case Compatible. I dont know where to get it.
Thank You
I actually like this dock. Would LOVE to hear from anybody who has it if it would fit a thicker case like the Incipio Silicryilc. It's still fairly thin but not quite the skin-like cases that many love.
eric0668 said:
I found it. I had a bad experience with the wall chargers from them One didn't work. took awhile to get a refund
It looks ok tho.
1. It looks case compatible, don't you think?
2. The title says GS3, but the description says Galaxy Note. I do think it is for the S3
3. I did find the Kidigi which is more than that, the original Samsung, or the EZOPower, the Deluxe Piano Black Charging Cradle Dual Purpose Case Compatible. I dont know where to get it.
Thank You
Click to expand...
Click to collapse
My thoughts:
1. case compatible? probably not... unless you have a dremel... if you do: yes it is.
2. with that shape, if it works for the note, i BET it works for the S3, as the S3 is thinner... but it might be "floppy"
3. kidigi says that the only US retailer is hypercel, but hypercel's website does not have it listed....
Jaxidian?
Jaxidian said:
I actually like this dock. Would LOVE to hear from anybody who has it if it would fit a thicker case like the Incipio Silicryilc. It's still fairly thin but not quite the skin-like cases that many love.
Click to expand...
Click to collapse
When you said you like this dock, which one? the one I questioned ? The one in the Amazon link? or the Hyperion?
Thanks
eric0668 said:
When you said you like this dock, which one? the one I questioned ? The one in the Amazon link? or the Hyperion?
Thanks
Click to expand...
Click to collapse
The one in the amazon link is what I'm very interested in...