Related
i have the xperia arc love the phone , but hate some issue. Ine issue is it offten losses the data signal. i have to poere the device off and on to correct. it also frezzes and cant do anything for a few minutes. i also finds it heats up. does anyone have these issue and have any ideas how to fix aswell the iphone has the option to press the home button and power button to reboot doe the arc have the same option thanks.
How about trying to repair your phone using SEUS? You might lose data but chances are that they might also solve your problem.
Good luck!
hey thanks, but what is seuss where do i find it and does it work
LOL! Sorry, SEUS stands for Sony Ericsson Update Service. You most likely would have installed this on your computer when you purchased your phone.
lol thanks
So i've had the arc for about a week now and really don't get on with it, mainly the lock button, i've nearly dropped the phone a few times trying to press it.
Anyway my phones being replaced and Ive installed the latest update, unlocked the bootloader and rooted the phone, obviously the phone can't go back this way. Whats the easiest way to get this phone to a working (retail) state.
Relock the bootloader and then update via SEUS to get back to stock.
And there are widgets that help turn the screen off. I use Widgetsoid.
yusuo said:
So i've had the arc for about a week now and really don't get on with it, mainly the lock button, i've nearly dropped the phone a few times trying to press it.
Click to expand...
Click to collapse
DONKEY
Bad excuse for selling your arc..
Sent from my LT15i using Tapatalk
yusuo said:
So i've had the arc for about a week now and really don't get on with it, mainly the lock button, i've nearly dropped the phone a few times trying to press it.
Anyway my phones being replaced and Ive installed the latest update, unlocked the bootloader and rooted the phone, obviously the phone can't go back this way. Whats the easiest way to get this phone to a working (retail) state.
Click to expand...
Click to collapse
you can unlock it with the home button
Seriously, you never thought of pressing the Home button?
Sent from my SE Xperia arc (LT15i) using Tapatalk.
That litle button up top may be small but once you get useto it it's just fine .
yusuo said:
So i've had the arc for about a week now and really don't get on with it, mainly the lock button, i've nearly dropped the phone a few times trying to press it.
Click to expand...
Click to collapse
...monkey! hahaha, How you never press the Home button??... My daughter knows how to unlock the phone.. (she's 1 year old...).
Ok, so half a year ago i used my xperia arc for a couple of minutes, locked it. And then when i was about to unlock it just 2 minutes later the phone started vibrating, the slide to unlock button was blinking and the lower part of the screen was not responding to my touch.
I could however unlock the phone by swiping my finger from left to right about 2,5cm higher than the swipe to unlock button is located.
.
I delivered it to service and they told me it was water damage to the motherboard, and that i had to get a new phone. (I dont think its water damage, since the water sensors where triggered when i lost the phone in the snow half a year before this happened, and at the time the screen malfunctioned the phone had been dry for ages)
I now own a iPhone 5, but it would be nice to have a phone i could use when in dangerous situations, camping in the forest, skiing etc.
Now i have tried to connect my Arc to the pc and opened up pc companion, but i have lost the SIM card a long time ago, and i can not enter the unlock pattern on my phone due to the weird screen, so i am not able to troubleshoot the phone via that program.
So i was wondering if there is any chance for me to rescue my phone, either it is software or screen replacement i need.
(If a new SIM is needed for troubleshooting i can just go to the store and get one)
I can also upload a video of the phone if that would be to any help.
Edit: Seems like every time i touch the upper/middle part of the screen the lower part of the screen also registers my touch.
Thank you for helping me out with this troublesome issue.
snorketre said:
Ok, so half a year ago i used my xperia arc for a couple of minutes, locked it. And then when i was about to unlock it just 2 minutes later the phone started vibrating, the slide to unlock button was blinking and the lower part of the screen was not responding to my touch.
I could however unlock the phone by swiping my finger from left to right about 2,5cm higher than the swipe to unlock button is located.
.
I delivered it to service and they told me it was water damage to the motherboard, and that i had to get a new phone. (I dont think its water damage, since the water sensors where triggered when i lost the phone in the snow half a year before this happened, and at the time the screen malfunctioned the phone had been dry for ages)
I now own a iPhone 5, but it would be nice to have a phone i could use when in dangerous situations, camping in the forest, skiing etc.
Now i have tried to connect my Arc to the pc and opened up pc companion, but i have lost the SIM card a long time ago, and i can not enter the unlock pattern on my phone due to the weird screen, so i am not able to troubleshoot the phone via that program.
So i was wondering if there is any chance for me to rescue my phone, either it is software or screen replacement i need.
(If a new SIM is needed for troubleshooting i can just go to the store and get one)
I can also upload a video of the phone if that would be to any help.
Thank you for helping me out with this troublesome issue.
Click to expand...
Click to collapse
I correct my self, the video would be really useful, if you could please post it, thanks.
Ahhh.... cant post "outside links"... i uploaded the video on youtube...
Can i upload it on this site somewhere?
snorketre said:
Ahhh.... cant post "outside links"... i uploaded the video on youtube...
Can i upload it on this site somewhere?
Click to expand...
Click to collapse
Use the youtube video feature on the forum.
Take the video code and put it between youtube tags, for example
If video's link is http://www.youtube.com/watch?v=JmvCpR45LKA, then the video code is everything after =, in this case it is
JmvCpR45LKA
Click to expand...
Click to collapse
So you have to put it between youtube tags, like this
Code:
[ YOUTUBE]JmvCpR45LKA[/YOUTUBE]
(Remove the space between [ and Y, I removed it to show, how it works.)
Then it appears like this
This was just an example. Post your video by the same method.
Have you tried flashing stock firmware?
From what I think this is that somehow ur screens size has been reduced in the system, bcuz if the screen would have gone bad u wudnt be able to unlock it from 2.5cm above the actual place
But this is just me guessing a reason
I suggest you flash stock firmware using flashtool, or use repair option on PC companion
There are many guides on xda to use flashtool
Sent from my LT18i
Ok, so here is a cropped clip of the phone, at about 01:00 i managed to unlock the phone, but as you see that does not help me...
Sorry for awkward camera handling
snorketre said:
Ok, so here is a cropped clip of the phone, at about 01:00 i managed to unlock the phone, but as you see that does not help me...
Sorry for awkward camera handling
Click to expand...
Click to collapse
Flash stock firmware with SEUS.
Prider555 said:
Flash stock firmware with SEUS.
Click to expand...
Click to collapse
I found a tutorial on how to do it, but the link to download seus sends me to sonymobile.com/uk... and i am not able to find a download, would you mind helping me out?
http://forum.xda-developers.com/showthread.php?t=1376184
This is the tutorial i found, would this work?
snorketre said:
Ok, so half a year ago i used my xperia arc for a couple of minutes, locked it. And then when i was about to unlock it just 2 minutes later the phone started vibrating, the slide to unlock button was blinking and the lower part of the screen was not responding to my touch.
I could however unlock the phone by swiping my finger from left to right about 2,5cm higher than the swipe to unlock button is located.
.
I delivered it to service and they told me it was water damage to the motherboard, and that i had to get a new phone. (I dont think its water damage, since the water sensors where triggered when i lost the phone in the snow half a year before this happened, and at the time the screen malfunctioned the phone had been dry for ages)
I now own a iPhone 5, but it would be nice to have a phone i could use when in dangerous situations, camping in the forest, skiing etc.
Now i have tried to connect my Arc to the pc and opened up pc companion, but i have lost the SIM card a long time ago, and i can not enter the unlock pattern on my phone due to the weird screen, so i am not able to troubleshoot the phone via that program.
So i was wondering if there is any chance for me to rescue my phone, either it is software or screen replacement i need.
(If a new SIM is needed for troubleshooting i can just go to the store and get one)
I can also upload a video of the phone if that would be to any help.
Thank you for helping me out with this troublesome issue.
Click to expand...
Click to collapse
If i was U
for first work i'll flash an stock firmware using flashtool
Testing out sony update service now :silly: Hope it works
Ok, so sony update service set my phone to factory default, updated it to android 4.(something) aaaanndddd....... screen is still not working
s.bluedreams said:
If i was U
for first work i'll flash an stock firmware using flashtool
Click to expand...
Click to collapse
I cant rly enable usb debugging, so i think im out of luck there
Edit: Flashed the phone with flashtool, screen still not working :L
Note that this phone have never been attempted rooted or similar.
Ok ya it should have upgraded u to ICS 4.0.4
But I guess I have no other solution, sorry :-/
Sent from my LT18i
No-one else?
None of you know how to fix this?!?
Just give me some feedback, no answers does me no good :L
3rd bump...
Bump, and... how do i delete a reply?
Super uber bump...
Yet another bump
Bought this phone off the electronic bay, arrived totally fine, no signs of any damage, worked just fine. Upgraded it with the sony OTA updates to 4.1 and then the screen started acting a little funny. Sometimes when hitting the unlock button it would just light up the backlight. Then a few days later it stopped ever doing anything besides lighting up the backlight. Then it progressed to doing what I show in the video.
It still plays alert tones when i get messages or calls, but obviously the phone is totally unusable, but charges up fine.
any ideas what is going on here? Called Sony for a repair, but I was unaware they just charge a flat $185 irregardless of what the problem is...ridiculous.
foofiebeast said:
Bought this phone off the electronic bay, arrived totally fine, no signs of any damage, worked just fine. Upgraded it with the sony OTA updates to 4.1 and then the screen started acting a little funny. Sometimes when hitting the unlock button it would just light up the backlight. Then a few days later it stopped ever doing anything besides lighting up the backlight. Then it progressed to doing what I show in the video.
It still plays alert tones when i get messages or calls, but obviously the phone is totally unusable, but charges up fine.
any ideas what is going on here? Called Sony for a repair, but I was unaware they just charge a flat $185 irregardless of what the problem is...ridiculous.
Click to expand...
Click to collapse
Hi,
The best way to rule out any software problems would be to flash the latest 6.2.B.1.96 ftf using Flashtool. So, first make sure that the phone has enough charge, then press and hold the volume up+power combination until you get three vibrations. Then press and hold the volume down key and simultaneously connect the USB cable when Flashtool prompts you to. Once the flashing is complete, disconnect your phone and turn it on normally.
Regards,
abcdjdj
Sent from my LT26i using xda app-developers app
I already flashed back to stock just using the sony bridge app. It seemed to work fine (nothing showed up on the screen the entire time). After the phone boots up I can hear notification sounds as it gets all my texts and voicemails/whatever else. But otherwise it still does what is shown in the video below:
here is the video again, not sure if it worked last time:
http://www.youtube.com/watch?v=jbrpsWburMw
foofiebeast said:
I already flashed back to stock just using the sony bridge app. It seemed to work fine (nothing showed up on the screen the entire time). After the phone boots up I can hear notification sounds as it gets all my texts and voicemails/whatever else. But otherwise it still does what is shown in the video below:
here is the video again, not sure if it worked last time:
http://www.youtube.com/watch?v=jbrpsWburMw
Click to expand...
Click to collapse
What bug u reported is the bug of .200 and .211 official bug.. Its fixed in .96fw.. Wipe everything when u flash .96fw... So there won't be any problems..
sudhindrakv said:
What bug u reported is the bug of .200 and .211 official bug.. Its fixed in .96fw.. Wipe everything when u flash .96fw... So there won't be any problems..
Click to expand...
Click to collapse
Well there is a slight problem.
The phone does not have an unlocked bootloader yet, so I can't use flashtool. It has been flashed back to stock using the method I mentioned above. I have just finished installing ADB because (bear with me please) there is no way to turn the phone into fastboot mode without turning it off (I cannot currently turn it off because I can't see what is happening on the screen and don't remember how this phone works when you hold down the lock key to turn it off). I can perform a hard reset, but no way to just get it to turn off entirely.
So I thought I could use adb to shut it down, but adb won't work unless I have debugging enabled, which again I can't do unless I could basically just blindly navigate the menu to those buttons.
Although if I wait until the phone is fully dead then I can hopefully get it into fastboot mode, but that only gives me one chance. Plus it has a full charge right now, so that's going to be awhile.
Any suggestions?
I can get it in to fast boot if I'm quick, but I still can't enable debugging beforehand so its semi worthless.
I've been trying to watch videos to see where the button placement is to navigate through the menu to blindly enable debugging, but I can't seem to figure it out. It also doesn't help that I have no idea what version of android is now on the phone. I used the mac sony bridge app to restore the phone, but i'm not sure if that set it back to stock stock, or what version of android it set it to.
I am also now even more confused because I connected the phone to the computer and when I browsed it, all the pictures I took were still there...which should have been wiped when I restored it with sony bridge...
figured out it was 4.1 and watched review videos until i found one that showed the menu layout (although now I realize google images would have been more helpful).
Now going to see if I can get the bootloader unlocked.
I still feel like flashing 6.2.B.1.96 isn't going to do anything, because I assume that is what the sony bridge app flashed to it. Also I don't see where you are talking about that the issue I am having was a known issue, if you could point me in that direction that would be very helpful.
EDIT: Actually I'm not sure I enabled debugging after all, as when I do adb devices, no device is listed as running, just a blank space. Though I'm still not convinced doing the above would do anything, as it is basically what I have already done, just with flash tool as opposed to the official sony route.
Anyone have any ideas? I got a torx 6 and opened the phone, checked the connection between the motherboard and phone and it is fine. Screen is still having same issue.
I would be happy to just buy a replacement part for it, but i have no idea what part is messing up. Is it the display (the touch works fine) or is it the motherboard (it seems weird that it would be this because the phone functions completely normally, I even accidentally answered a call yesterday).
If i was to try and replace the LCD (or whatever it is) would I have to replace the digitizer as well? At which point it would make more sense to just sell the phone for parts I suppose.
You can use the flash tool by bin4ry with a locked bootloader. Not sure if you're past that stage though.
Sent from my LT26i using xda app-developers app
dkconor said:
You can use the flash tool by bin4ry with a locked bootloader. Not sure if you're past that stage though.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
I'll go ahead and try that out, but is there really much of a point do you think? Considering I've technically flashed the phone back to stock using the official software, why would it be any different doing it this way?
I am asking honestly btw, not trying to sound rude. I'm thinking it is more of a hardware failure, i just have no idea what part exactly is failing.
The phone itself works totally 100% fine, the touch works totally 100% fine, the only thing that is not happening is the data getting to the screen and displaying. The screen just flashes white for a second and then fades out (as you can see in the youtube link). Or it flashes a solid block of white at the top in the middle and faded white the rest of the way down and then it slowly all fades out (or disappears immedaitely if i press the lock button. The buttons all work fine (physical and touch) and i can navigate around the phone, albeit totally blindly.
This is really frustrating, and I'm pretty disappointed to see how sony had no interest at all in helping me resolve this situation.
Flashtool works with lock and unlocked bootloader
XDAプレミアムを使用 して私のLT28hから送ら れてきた
UchihaDareNial said:
Flashtool works with lock and unlocked bootloader
XDAプレミアムを使用 して私のLT28hから送ら れてきた
Click to expand...
Click to collapse
....right i know, but why does that matter. Why would reflashing my phone help at all at this point. Did you even read my post?
Listen to us
Alright so you came to this thread for...help
We have told you numerous times to flash using this tool (dev host link):
http://d-h.st/Kb8
install the flashtool created by Binary (sorry for username spelling error)
Download the ftf
https://docs.google.com/file/d/0B18FXPCopQhkeXNoWGVWbzlRaG8/edit?pli=1
now USING FLASHTOOL (link 1)
FLASH the FTF (link 2)
A clean flash. This flash is different from the flash that Sony will provide you for obvious reasons.
Using this method will COMPLETELY remove any doubt whether the issue is regarding software or hardware. Then you dont have to "think" whether the issue is hardware related or software related.
Sorry if i sounded rude but i had a hard time comprehending why you would not use the advice given by i believe 2 different indiviuals on a questions and answers thread.
424aca said:
Alright so you came to this thread for...help
We have told you numerous times to flash using this tool (dev host link):
http://d-h.st/Kb8
install the flashtool created by Binary (sorry for username spelling error)
Download the ftf
https://docs.google.com/file/d/0B18FXPCopQhkeXNoWGVWbzlRaG8/edit?pli=1
now USING FLASHTOOL (link 1)
FLASH the FTF (link 2)
A clean flash. This flash is different from the flash that Sony will provide you for obvious reasons.
Using this method will COMPLETELY remove any doubt whether the issue is regarding software or hardware. Then you dont have to "think" whether the issue is hardware related or software related.
Sorry if i sounded rude but i had a hard time comprehending why you would not use the advice given by i believe 2 different indiviuals on a questions and answers thread.
Click to expand...
Click to collapse
Hi,
because I could not follow the advice from the first user because the bootloader is locked. The second person gave me the advice, but honestly it seemed like pretty pointless advice. I don't understand how it is "obviously different" if it is literally flashing the same firmware (at least the first advice was that). I don't think it's that strange to ask why it would be any different.
To me it sounds like I had a broken window in my house and I asked someone how to fix it. I bought the replacement glass from store A and it didn't fit. I asked for help and someone pointed me to the exact same item at store B and said that surely it would work. Do you understand why this could be confusing? I feel like about half the time people give help on XDA it is very general and people are just looking for "thanks"...
I'll definitely try this though if you think there's a chance that it might work out differently. I'll try and get it set up tonight, thanks for the encouragement, I understand I probably sound stupid, just trying to figure out what to do.
Also, I assume this flash tool won't work if USB debugging isn't enabled. As I've said in previous posts, I can click things just fine, but because I can't see what I am doing, I don't have way of knowing where to click on the menu.
Does anyone have their phone set up with this version of android still. If you could take screen shots of each click to make to get to the dubugging box (and if there is a confirmation box) i would greatly appreciate it. I only had the phone for a week before this randomly happened, so I hadn't thought to enable debugging yet, as I hadn't even thought about custom firmware yet.
EDIT: Or even just a picture of what the screen that comes up when you long press to shut the phone down. I have no way of turning off this phone right now without just waiting for it to run out of battery.
Holding down the power button for a long time does nothing, holding vol up and power restarts it, but I need a way to turn it off. If i hold the power button for like a second so instead of locking it, the menu comes up, I just can't seem to find the freakin button for power off.
(please remember I can see nothing on the screen, it is just blank).
flashtool does not need debugging when you doing the actual flashing
to turn off the phone
SIMULTANEOUSLY hold down
Power+ Vol up + Vol Down (AT THE SAME TIME)
wait for about maybe less than 25 seconds and you will experience THREE short consecutive vibrations
at this time...the phone is off
then you can begin the flashtool method
Hello guys, I need your help.
Today, out of the blue, my wife's ION (lt28at) touchscreen stopped responding. The phone boots just fine (perhaps a bit slower than before, but that's my appreciation), messages are received, apps update automatically, but it doesn't respond to touch. How could it happened? we were just arriving home from a running workout, we were sitting on the porch and the phone rebooted on its own, after that it stopped responding to touch.
Now I've got a very sad wife, very little chance of getting a new device (the market in Venezuela is very restricted and limitative), and no clue as to how to fix it.
Please if any of you can help me here, it will be most appreciated.
Edit: Forgot to mention. the device has its bootloader locked. Firmware updated to ICS 6.1.C.1.111. Rooted (probably about 9 months ago).
rupalazzi said:
Hello guys, I need your help.
Today, out of the blue, my wife's ION (lt28at) touchscreen stopped responding. The phone boots just fine (perhaps a bit slower than before, but that's my appreciation), messages are received, apps update automatically, but it doesn't respond to touch. How could it happened? we were just arriving home from a running workout, we were sitting on the porch and the phone rebooted on its own, after that it stopped responding to touch.
Now I've got a very sad wife, very little chance of getting a new device (the market in Venezuela is very restricted and limitative), and no clue as to how to fix it.
Please if any of you can help me here, it will be most appreciated.
Edit: Forgot to mention. the device has its bootloader locked. Firmware updated to ICS 6.1.C.1.111. Rooted (probably about 9 months ago).
Click to expand...
Click to collapse
Try taking a backup of data and re installing the software using Sony PC Companion.
Sorry for the lack of response. As suggested I tried to repair the firmware via Sony PC Companion. No success there. Looks like somehow its some piece of hardware malfuctioning.
I'm going to try to open the device and see if something is out of place. I'll post what happens then.
my device -->>Xperia S
same thing happen with me after shutdown when i turned it on back(pressing power to ON)
the phone was slow and after 1 or 5 min touch screen not responding...
so i tried switching off but touch screen was not working so i opened by phone backpanel with screwdriver
after that i took out the battery and placed it back.
then again i turned it on after that everything was fine my touchscreen was working good..
i dont know its was my luck or something ..
PLZ dont open your phone if you dont Know..!!!