Related
I've just driven over 400 miles...
I was using my Desire with Co Pilot to navigate me from Scotland to Bristol...
The phone was in my phone holder which is placed in the cigarette lighter so the phone can apparently be charged at the same time as being held...
The phone showed that it was "charging" and yet it still ran out of power....
That's right.. the CHARGING phone RAN OUT of power and switched off!!!!!!! TWICE!!!!!!!!
Has anyone else experienced this? I can't imagine that this phone uses more power than the charge being applied?!
I used my Desire as GPS (with Copilot) the phone had 70% - 80% battery and after sometime it actually charged to 100%. Maybe there is some malfunction in your car charger or just not making a good contact in cigarette lighter plug. Check if charger's led lights all the time.
car chargers trickle charge so they prob couldn't keep up with the demands of CoPilot on the phone
EddyOS said:
car chargers trickle charge so they prob couldn't keep up with the demands of CoPilot on the phone
Click to expand...
Click to collapse
You need to ensure that the car charger is rated at 1AMP at 5V otherwise it will as stated only trickle charge. I've heard this story on other devices. Do you have a genuine HTC charger?
Also if the device gets to warm, it will stop charging in order to avoid damage.
Thanks for the reply guys!
No, it's not a geniune one... I tried 2 different ones, both the universal holder/chargers from Mobile Fun..
So far they've both been fantastic until this little phone came along...!
Connections have been fine, which is the strange thing..
It did get hot though, so you may be right Ardsar... Any way of keeping it cooled?
Buy OEM...
http://www.google.co.uk/products?q=...ient=firefox-a&price2=15.00&show=dd&scoring=p
Always best as you know that it'll work...
i have had the same problem plugging it into my computer and using it at the same time killed it.
charmz2k2 said:
I've just driven over 400 miles...
I was using my Desire with Co Pilot to navigate me from Scotland to Bristol...
The phone was in my phone holder which is placed in the cigarette lighter so the phone can apparently be charged at the same time as being held...
The phone showed that it was "charging" and yet it still ran out of power....
That's right.. the CHARGING phone RAN OUT of power and switched off!!!!!!! TWICE!!!!!!!!
Has anyone else experienced this? I can't imagine that this phone uses more power than the charge being applied?!
Click to expand...
Click to collapse
me
http: //forum.xda-developers. com/showpost.php?p=6075788&postcount=11
http: //forum.xda-developers .com/showthread.php?t= 658338 (delete the spaces)
Same as what others say as well. Your car charger doesn't supply enough amps to keep up.
Ofcourse it gets really hot, navigation is one of the most heavy thing you can do on the phone. And while doing that you charge it at the same time in perhaps a warm car as well.
But, get a 1A charger, not a 500mah like most are.
Same goes for hooking it on the computer, the usb port might not give enough power so the phone can drain itself when doing real heavy stuff.
Plugging something in does not guarantee it will work, you have to know what you plug in
casualt said:
i have had the same problem plugging it into my computer and using it at the same time killed it.
Click to expand...
Click to collapse
Of course you will - USB ports can only supply upto 500mA if you have nothing else connected to the USB HOst.
Same story for me.
I got a 550 mA car charger, and battery wasn't charging but slowly discharging (about 5-10% per hour) with navi+HDSPA.
Thought, well, 550 mA is not enough, let's see the plug charger from Desire box: that's 1000 mA. Let's go get a 1A car charger.
Got this www . p4c.philips. com/cgi-bin/dcbint/cpindex.pl?ctn=DLM2206/10&slg=it&scy=IT (saw off spaces) which is rated 5V-1A.
Plugged in, started navigating+HDSPA for satellite layer, and still wasn't charging but discharging at a rate of about 4% per hour.
I'm really annoyed 'bout this, I spent 20+15€ for both chargers, I do not want to spend another 25€ for OEM charger....it's unbelivable that I'd finish to buy 60€ of chargers to find out one that do not let battery deplete.
As a final test, I'll try a different cable from original HTC sync cable included in the box...let's see.
EddyOS said:
Buy OEM...
http://www.google.co.uk/products?q=...ient=firefox-a&price2=15.00&show=dd&scoring=p
Always best as you know that it'll work...
Click to expand...
Click to collapse
Can anyone who has used this confirm it will manage to charge fully even while the Desire is running a satnav program?
Why don't you plug in your normal charger and start running a navigation demo or something.
Not sure if that uses as much energy, but I think it most probably will. The original charger outputs 1A.
If the socket charger does the job, but not the car charger (read: you can also run a navigation demo in the car using that charger) your car charger might not be supplying enough energy as it should.
Or you can use a multimeter and see how many amps it outputs. But the pins are a bit smallish
Tried with another cable (not the original sync one) with just power wires connected, same story: I'll try with the original wall plug charger and see if it does the same or not, as both the Philips charger and the original HTC wall charger are rated 5V-1A
It does get very hot. I used my gps for 9 hours in a row and at the end it got too hot or something and the phone just rebooted.
Still It wasn't because the battery had run out of juice it was still good.
Also it was streaming music over bluetooth at the same time.
Used Nav for 1 hour this morning on the way to work while charging from the official HTC car charger. Phone now sat on my desk, battery reporting 100%.
The phone did get pretty hot though...
FlatEric83 said:
Same story for me.
I got a 550 mA car charger, and battery wasn't charging but slowly discharging (about 5-10% per hour) with navi+HDSPA.
Thought, well, 550 mA is not enough, let's see the plug charger from Desire box: that's 1000 mA. Let's go get a 1A car charger.
Got this www . p4c.philips. com/cgi-bin/dcbint/cpindex.pl?ctn=DLM2206/10&slg=it&scy=IT (saw off spaces) which is rated 5V-1A.
Plugged in, started navigating+HDSPA for satellite layer, and still wasn't charging but discharging at a rate of about 4% per hour.
I'm really annoyed 'bout this, I spent 20+15€ for both chargers, I do not want to spend another 25€ for OEM charger....it's unbelivable that I'd finish to buy 60€ of chargers to find out one that do not let battery deplete.
As a final test, I'll try a different cable from original HTC sync cable included in the box...let's see.
Click to expand...
Click to collapse
FYI, not all chargers are equal. I believe that HTC devices need a combination of pins to be connected on the USB port to "tell" the phone that it's connected to a real charger and not a USB port, otherwise the phone will only pull 0.5A, regardless of the output capacity of the charger.
This always used to apply to older HTC phones, and I can't see why they'd change it, so it's quite possible that your 1A Philips charger will not charge the same as my 1A HTC charger...
If in doubt, OEM
daern said:
FYI, not all chargers are equal. I believe that HTC devices need a combination of pins to be connected on the USB port to "tell" the phone that it's connected to a real charger and not a USB port, otherwise the phone will only pull 0.5A, regardless of the output capacity of the charger.
This always used to apply to older HTC phones, and I can't see why they'd change it, so it's quite possible that your 1A Philips charger will not charge the same as my 1A HTC charger...
If in doubt, OEM
Click to expand...
Click to collapse
That's what I thought, as I imagined that: I hoped that another cable I have, which has USB on one side and a 2 poles connector on the other side on which you connect various connectors, would be recognized by Desire as being a pure power cable. I wasn't lucky.
Since OEM is out for 25€, I tried with non OEM before to save some, but till now I buyed 35€ worth chargers, I'd have to stick with OEM
But now I'm really reluctant on getting OEM, since I do not want to end with spending 60€ in order to have my phone charged while navigating....I'll try to tinker some, and if I'll find out how, I'll report
I had the same problem by using a 1.5A car charger which is working great with iPhone.
As for the PC USB charge... are you sure it can't output 1A to charge the device??
JapanLover said:
I had the same problem by using a 1.5A car charger which is working great with iPhone.
As for the PC USB charge... are you sure it can't output 1A to charge the device??
Click to expand...
Click to collapse
USB2 specs do say that ports shall provide max 500 mA, ehnce motherboards have this limit.
BTW, here's a discussion I've found about the "cable" problem
forum.xda-developers. com/archive/index.php/t-643808.html
For HD2 (which is actually the model to which HTC CC C200 is dedicated)
I'll try to tinker with some cheap cable and see if this works.
I had a question about a charger - I'm interested in getting a second charger for the Vibrant. I see that the charger that comes with the Vibrant says it has an output of 5.0V and 0.7A.
If I have an old LG charger that has an output of 5.1V and 0.7A, would that work. Could it damage the battery in my Vibrant, in anyway.
Thanks.
Not sure about your old charger, but it should work. Try it out at your own risk though.
I did want to comment on the chargers for the Vibrant. The phone seems to want a lot of current to charge properly. I was using an older 5V 500mA charger that served me well with my G1 and older BB Pearl. I had the Vibrant on it and it wouldn't charge fully. I also noticed the same thing when I would hook-up the vibrant to my notebook (typically 500mA max per port).
The good news is that there are a lot of cheap 5V 1A chargers on eBay. Just make sure to check a charger's spec before buying one.
$1.75 wall charger - http://cgi.ebay.com/US-AC-Power-USB...er_MP3_Player_Accessories&hash=item4aa03f4b9a
I also bought 5V 1A car chargers and mini USB to micro USB adapters so that I can use my old USB to mini USB cables when I am on the go.
$2.40 car charger - http://cgi.ebay.com/1000mA-1A-USB-C...er_MP3_Player_Accessories&hash=item4399e189d1
Charge only $1 - http://shop.ebay.com/i.html?LH_BIN=...r&_dmpt=PDA_Accessories&_trksid=p3286.c0.m301
Charge + Data $2 - http://shop.ebay.com/i.html?_nkw=mi...adapter&_osacat=0&_trksid=p3286.c0.m270.l1313
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Vegastouch said:
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Click to expand...
Click to collapse
Tried my old charger .. it works but is really slow compared to the one that came with the Vibrant. Probably going to end up purchasing an extra one for when I travel.
Personally I don't mind something charging slower when I travel as long as I'm getting more power to the phone than I'm using of course.
Monoprice has 1000mA
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The extra 300mA will not damage the phone. Most smart phones require 700mA-1A to charge properly. But be careful, cheapo charger has potential to fry your phone. Anytime I buy a charger from ebay or cheap vendor, I plug it in to my old MP3 player for a week before I use it with my newer devices.
I have the same one that you see on monoprice. I've been using it for almost 2 years with no problem at all, YMMV tho.
I'd recommend this one. Looks identical to the charger that comes with my 3GS. Works well, I use it every day at work for more than 6 months now. Again, YMMV.
http://www.dealextreme.com/details.dx/sku.26446#open full view
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
the max charge rate for a Li-ion battery is 1C. So you could charge at up to 1500mA.
I ordered that exact charger a few days ago.
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The amperage rating only tells you the *maximum* possible output. The device (your phone) controls the current draw. As long as the voltage matches (5v), you can use a charger with any amperage rating which is 700mA (0.7A) or higher.
(Note that this only applies to chargers that your phone plugs into. You have to be more careful with the self-contained spare-battery chargers (where you remove the battery from the phone and put it into the charger). But those are normally battery-specific anyway.)
Also, you *might* risk damaging the battery through long-term usage of a charger that can't supply at least the minimum amperage (such as the sfsilicon's 500mA transformer). The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
MV10 said:
.......
. The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
Click to expand...
Click to collapse
that might explain why my laptop wouldn't always charge to 100% - first few times it did, and i'd find the notification msg when i'd close the laptop, but last few times it didn't
learn something every day
as i use the vibrant tethered every nite while browsing (which is when it was charging), any problem with finishing the charge with the samsung wall charger? ie interrupting the charge when i take it off the laptop?
The Samsung charger adapter which comes in the box is very slow in nature. It take more than 2 hours to charge my phone. I was wondering if I can use the following Nokia brand chargers which are fast chargers?
Nokia Charger Adapter CA-146C
Nokia Fast Micro-USB Charger AC-10
It won't make any difference the phone decides what current it draws from the charger, so it'll take just as long to charge.
Are you really sure about this? Can you link me to some articles which confirm this.
Even I was thinking about purchasing AC-10 charger from Nokia.
How fast is the nokia charger?
0-10% -> 100% in an hour or less?
Joey2o11 said:
It won't make any difference the phone decides what current it draws from the charger, so it'll take just as long to charge.
Click to expand...
Click to collapse
I'm not sure about this. I have a friend with a Blackberry Playbook and he reckons his phone charges much faster if he uses the charger from that.
The "stock" S2 charger is 700mA - it doesn't take a genius to work out that for a 1650mAh battery this will take about 2.5 hours to fully charge the battery under ideal conditions (phone off) or anything from 3-6 hours with the phone on, depending all what's running or if you're using the phone while it's charging.
Which is all pretty ridiculous - ok we're comparing apples and oranges when we compare a S2 to the likesw of a Nokia, but I do miss the days when I could charge my phone in an hour and have it last two or three days. I thought my Blackberry was bad but at least I can usually squeeze a full day out of it...
The only wall wart I had lying around that was more than 700mA was a 5V 2A supply. I've tried with that which works, but the phone chokes with a "battery overtemp" warning after about 10 minutes - which tells me I AM pumping more into the battery than it can handle. This would suggest that there IS a happy medium where we can optimize the battery charge time - I'm bust looking for a 1A supply...
I have TWO AC-10Xs, and am using it with the Ninphetamene kernel (which comes with increased charge input mods to 800ma) fine. Charges to full in about 2.5-3 hours.
I've never gotten overcharge errors either.
Hi,the usage of more powerful charger will eventually reduce lifespan of your battery. This comes from basic physics, materials and so... Higher mA means faster current, which wear the material of the capacitor - battery.
I have capdase 2 USB car charger that was used for my old iphone device.
It outputs 1A.
is it safe to use it?
I tried to charge with it for 10-15minutes or so, and didnt recognize any suspicious warmups...it reached 41~degrees while at the moment im charging and using it as a hotspot and its on 38 degrees.
DobermanS said:
Hi,the usage of more powerful charger will eventually reduce lifespan of your battery. This comes from basic physics, materials and so... Higher mA means faster current, which wear the material of the capacitor - battery.
Click to expand...
Click to collapse
The phone (specifically, the kernel) limits charge coming in, and there MUST be hardware limiters on the batteries and the phone themselves (which, in some cheapo batteries DON'T WORK and results in them frying themselves and the phone in process) and the batteries are replaceable anyway.
eranyanay said:
I have capdase 2 USB car charger that was used for my old iphone device.
It outputs 1A.
is it safe to use it?
I tried to charge with it for 10-15minutes or so, and didnt recognize any suspicious warmups...it reached 41~degrees while at the moment im charging and using it as a hotspot and its on 38 degrees.
Click to expand...
Click to collapse
i use htc wall charger rated at 1A and having no proplem with ,a pc USB port is capable of 1A and we all know there are no problem ,even so there are no visible improvement in charging time because as someone said the charging current is automatically regulated
ledavi said:
i use htc wall charger rated at 1A and having no proplem with ,a pc USB port is capable of 1A and we all know there are no problem ,even so there are no visible improvement in charging time because as someone said the charging current is automatically regulated
Click to expand...
Click to collapse
That's good to know that the current is regulated by the device.
Is there a software to see what is the current taken by the phone?
As long ad the temperture isn't higher than 45degrees is it ok?
By the way, Im pretty sure that usb outputs 0.5A and not 1A
Sent from my GT-I9100 using XDA Premium App
battery monitor widget
It seems logical to be able to use all chargers as smartphones all have micro usb .
(I 'm not sute that's mean something in english, sorry)
Great widget! thanks.
I really like the data it gives!
Sadly, while charging with my .7A original charger & meanwhile giving a hotspot to my laptop, it shows that only 76mA comes in!
hehe, gonna take forever to charge the battery this way.
i doubt this. i'm still worried about the compatible problem~~~
After two days with the battery monitor widget Im affraid itself it drains the battery.
could it be it affects the battery?
settings are regular, it monitors changes every 60seconds
Let's see if I can help make things a bit clearer. Feel free to correct where I may be off.
The Nokia thing, it's not a charger. It's a power supply.
The "charger" is built into your phone, hardware-wise.
How can I prove it?
Take the Samsung supplied cable, plug it into your computer. You'll see that your phone is charging too. No, the cable is not a charger. Do you think your computer is a special built charger for your phone? Hardly.
The charging circuit is within the phone, and thus charging the battery when there's available power.
Ok, so we have the charger (i.e. the mobile phone), we have the battery, we need the power. Where do we get power from? The wall adapters (or computers). So what are the wall adapters? Ratings of 1000mah means that the wall adapter can provide up to 1000ma per hour.
However, your charging circuit will determine how much current to actually draw. For example, drawing 800mah for 10 min may raise the temperature to 55 degrees, so after 10 min the charging circuit drops the charging current to 500mah.
Of course, if you're using el cheapo cables, some cables may not be able to support the current draw and you may find that even with 20000000mah power supplies your phone can only draw 100mah.
The SGS2 heats up pretty easily, and it doesn't quite draw beyond 700mah. The circuit built into the phone doesn't allow it to, if i'm not wrong. If your phone is overheating while charging, you better change your case as it's going to cause your phone to overheat sooner or later.
Using a 20000000mah power supply isn't an issue, because the charging circuit within the phone will be able to draw only a certain amount.
Me, I plug my SGS2 into a 2Ah charger every night to charge, and yes it's perfectly fine. I'm only upset that after buying an expensive 2A charger, I realised that the phone is not able to draw high currents (phone even heats up to 55degree Celsius when charging).
Charging the phone on a ice pack (which lowered the phone temperature to 16 degrees while charging) didn't increase the amount of current drawn by the phone, even on a 2A power supply.
My humble advise is, stick with the stock power supply, or at most get a 1A version. No need to splash for a 2A power supply. If you really need faster charging, get a battery charging dock.
eranyanay said:
After two days with the battery monitor widget Im affraid itself it drains the battery.
could it be it affects the battery?
settings are regular, it monitors changes every 60seconds
Click to expand...
Click to collapse
yes of course it does. It consumes a certain amount of ma per hour, doesn't it?
Personally, there's a app called watchdog, look for it, IMHO it helps to catch rouge apps better, and manage battery better.
I thought the whole idea of having a universal micro USB charging connection across most good brands was so you could use other chargers!
moooxooom said:
yes of course it does. It consumes a certain amount of ma per hour, doesn't it?
Personally, there's a app called watchdog, look for it, IMHO it helps to catch rouge apps better, and manage battery better.
Click to expand...
Click to collapse
Well I just like the widget, which shows me also the battery temperture
I hope it doesnt takes too much
Not sure if this is an issue, or if its standard. But here is what im facing.
A charge off the wall will get my Tmobile SGS2 to a full charge (from around 15%-20%) with the stock plug and cable in about an hour to an hour and a half. However charging from my laptop or from a car charger im only getting a total increase in battery 15% in an hour. I tried to use the stock cable with the laptop and got about 25% in an hour and a half. I tried to use the stock cable in my car and only got 7% in 45 minutes.
Anyone have any ideas?
When charging from the car or from a laptop, the power is limited to what the cable/charger can supply which might not be sufficient for the SGS2. For the car charger, you can try buying one that supplies more amps, but for the laptop, theres really nothing you can do, as it is limited by the USB cable itself.
Do you mean the USB cable or do you mean the actual plug & internal workings of the laptop? because i have tried several cables. And just also remembered that i tried the stock cable as well with crappy results.
you can buy a 2A charger, and it will charge a lot faster, that's what i use in my car
at home or office, i just use the regular charger, as i always carry extra battery packs
When you plug it into the laptop it only gives out a limited amount of amps unlike the regular charger that came with the phone. The one that came with the phone regulates the charge so that it doesn't overcharge your device or anything. The laptop USB plug is supposed to be meant for peripherals like a mouse and stuff so it doesnt give out that much amps, therefore charging slower than a regular charger.
I use the t-mobile rapid car charger, It can charge this beast in about 45 minutes. It also has a 2nd port for a 2nd device.
Deebo took your bike too?
Really?! I've never seen my charging current go over 700 mA, even with a 2 amp charger.
I'd happily give up some long-term lifetime for faster charging.
Sent from my Galaxy S II using Tapatalk.
They have a home charger too that's a home charger plus car charger in 1. I use them in the cars but they're great for trips cause you have a 2 in 1 charger.
With 3 batteries and a external charger though, I never need a home charger and haven't even put this on a charger yet.
Just as most of the others have said here, the charge is going to be limited to what the source can put out. If you get another charger (2A charger) then it will be able to charger faster but you also want to be careful with using after market chargers there are some that can negatively affect your battery by overcharging which is when the phone gets fully charged but the charger does not ever stop with the flow of power to the device.
Ok Thanks all.
Guess i need a new car charger and something for the office.
Also did some crawling through "Mother of all battery life" thread found some good ideas there for making this thing last longer on the charge its got.
Im having the same problem my fone takes forever to charge...im pluged into the wall using the charger in the box n it took me no joke 7 hours to charge my fone!
Im on it rite now as its plugged i to the wall n im losing power instead of charging...i tested the voltage n its fine ...is tgere anythin i can do?
Sent from my SGH-T989 using XDA Premium App
I, myself, actually haven't used the OEM charger that came with the phone. Although I did notice it is quite small and the phone battery is a 1850mAh (larger than normal) that might affect the charging rate. I am currently using the old HTC charger that came with my Sensation and it charges fully in about 2 hours. If you want a charger that charges your phone in an hour and a half, I recommend going into a T-mobile store and grabbing the Wallcharger they sell. It charges 33% faster than OEM chargers and does not harm your device nor kill your batteries.
You can find it by clicking here
Exactly same problem as OP.
OEM wall charger charges phone to full in couple of hours but laptop USB or car USB is doing at 10% / hour assuming you don't do anything on your phone but just leave it there to be charged. Otherwise you'll be losing battery rather than being charged.
513263337 said:
Exactly same problem as OP.
OEM wall charger charges phone to full in couple of hours but laptop USB or car USB is doing at 10% / hour assuming you don't do anything on your phone but just leave it there to be charged. Otherwise you'll be losing battery rather than being charged.
Click to expand...
Click to collapse
As explained in previous post, this is due to limitations in the laptop USB drive and depending on what car charger you have, the phone might suck up more juice than it is able to provide.
so this is nothing a kernel or any other tweak can fix?
mightymike889 said:
so this is nothing a kernel or any other tweak can fix?
Click to expand...
Click to collapse
no a new kernel or any other tweak wont work.
So i gotta buy a new charger!?!
Sent from my SGH-T989 using XDA Premium App
Yes, or if you have like an old microUSB charger from HTC or another Samsung phone (Samsung Vibrant) you can try using those.
the 2A chargers from BlackBerry are the best
So, you guys are seeing the phone draw over 700 mA (when the charger is capable)?
If I use my iPad charger (2A), I still top out at 700 mA, and the ~4 hours that go with it. :/
Even my 1A car charger tops out at 700 mA, that's why I thought it was a hardware issue.
Sent from my Galaxy S II using Tapatalk.
Hey Everyone,
Surprisingly enough, I have been playing with a lot of car chargers and found a great one. I was talking through Walgreens and saw this one for $5, I turned it around and it charges at 1000mah, that's the same as an AC Adapter charger the phone comes with.
From my experience, most chargers that try and charge the Phone at 1000 mah, such as other car chargers and the iPhone block will either not do anything or charge as USB. This baby actually charges your phone as "AC" and therefore charges much faster than the 500 mah car chargers you often get at other stores.
This was found at WALGREENS, of all places! I recommend it for the AC charge ability versus the USB charge. Another plus is how small it is. It doesn't take up any room at all any barely pops up half an inch.
If anyone has any other ones they commend, feel free to do so.
Cons: It does not have a internal fuse like one of my other chargers, so if there is ever a surge of current, I don't know if the phone has anything built in to protect itself. This is charging at 1000 mah.
Pretty sure this phone will allow for 2.1 amp charging, the SII does, and if you buy any of the following ones, the phone will charge a whole lot faster for a few more dollars:
3.1A Dual USB Car Charger Adapter (White)
Wagan Twin USB/DC Socket Traveler's Adapter
(for the home) PowerGen Dual Port USB 2.1A 10W AC Travel Wall Charger
I've removed text on there for these being made for iPhones / iPads for a reason, but I'll go ahead and state that they'll work just the same for our devices as well....
I bought everything on that list, multiples of the 2nd and 3rd for multiple cars / rooms, so I know they're good quality stuff
KryptosXLayer2 said:
Pretty sure this phone will allow for 2.1 amp charging, the SII does, and if you buy any of the following ones, the phone will charge a whole lot faster for a few more dollars:
3.1A Dual USB Car Charger Adapter (White)
Wagan Twin USB/DC Socket Traveler's Adapter
(for the home) PowerGen Dual Port USB 2.1A 10W AC Travel Wall Charger
I've removed text on there for these being made for iPhones / iPads for a reason, but I'll go ahead and state that they'll work just the same for our devices as well....
I bought everything on that list, multiples of the 2nd and 3rd for multiple cars / rooms, so I know they're good quality stuff
Click to expand...
Click to collapse
But is it recommended by the manufacturer to charge at those speeds? Do they offer any accessories that charge at those speeds naturally?
Because I don't want to charge above anything that Samsung recommends. I know the wall charger is rated at 1amp.
Reason being is that charging batteries faster and higher than recommended can damage or give them false charges.
Just thought I'd comment on this.
I have the 2.1 amp dual port charger from Tech$Go (Walgreens / E-Filliate Inc ) - I attached a picture.
I have a MyCharge power brick, and it all the sudden stopped holding a charge. Now it charges forever, and only supplies power out for a very very small amount of time. I usually charge it, and my phone, using the Tech&Go charger. When using that charger on my other cell phone, when plugging it in/taking plug out I noticed that the battery level was jumping around crazy.
I think it might be putting out too much and I think the higher voltage/amps caused a problem with my power brick.
Anyone have any clues about this I'd greatly appreciate it. I searched on Google and got this link so figured I'd ask even though I don't have this phone, I'm using a LG-Connect from MetroPCS
anyone have experience using car chargers with extended batteries?
Zerolemon 7000mAh battery
---------- Post added at 01:18 AM ---------- Previous post was at 01:08 AM ----------
i love this rom!