[Q] problem with S-Off 2.2.1 PC49IMG.zip - Wildfire Q&A, Help & Troubleshooting

Hi, I have a S-Off'd Wildfire (done with XTC-Clip) in version 2.2.1 and I asked a user from this forum how could I root. He answered me with this message:
Code:
hi poinu glad you managed S-off now you can put on any rom you want.
first you must get a custom recovery on your machine I use ClockworkMod 3.0.0.6
this should be fine to flash cyanogenmod7.
here is the file to it (http ://www . mediafire . com /?i09yp4r7odhlzws)
put this PC49IMG.zip on the root of your sd card. (not in a folder)
put the cyanogenmod update zip also on your sd card.
Reboot your phone into Hboot Mode by pressing Volume Down and Power.
It will now ask if you want to update the firmware select Volume Up for Yes.
wenn its done remove thePC49IMG.zip from your sd card.
Reboot your phone into Hboot Mode again.
it will look for the PC49IMG.zip again let that finish and ignore.
Then go with volume down to recovery and push power button, clockwordmod will start.
Do a wipe cache partition, wipe data/factory reset and under advanced wipe Dalvik cache.
go to install zip from sdcard / choose zip from sd card and choose your cyanogen mod update zip and install.
reboot wen finished don't worry if it takes some time first reboot always is slower.
hope i helped you enjoy your mod.
kind regards ab65
I've downloaded the PC49IMG.zip file and copied at the root next to the cm7.zip file (picture: http : //i55 . tinypic . com/ egai5s. png) but when I enter the HBOOT and looks for the PC49IMG.zip file, it finds nothing (and yes, the file is PC49IMG.zip not PC49IMG.zip.zip, I've already checked this )
I don`t know what I have done wrong (I have done nearly anything!) any ideas?
Thank you very much for having a look on the threat

here is what i suggest simply,
***** Ur memory card must be formatted with fat32 partition before doing this.......
go to this link and download the attached file at the bottom PC49IMG.ZIP
http://forum.xda-developers.com/showpost.php?p=12188132&postcount=15
Since security flag is turned of (by xtc clip) , the recovery partition is no longer protected. U can install custom recovery without any exploits. That downloaded PC49IMG.ZIP file is nothing but "ClockworkMod Custom Recovery". Put it in the root of the memory card (fat32). Then go to hboot menu. It definately finds the file and prompts u to install. Go with it. At the end u will have custom recovery.
then u can install custom roms. Custom roms will be packed in zip files and can be installed from recovery menu. Its not needed to put the custom rom zip file only in the root of memory card. And the most important thing is, remember to clear data/factory reset and clear cache (both done frm recovery menu) before installing a custom rom. Thats all

Oh god, i didn`t know that.... succesfully done
but now... there's another problem, I installed the CyanogenMod7 and there are some things that I pretty dislike and I would like to install another ROM I have (it's a 2.2.1 rooted ROM) and I tried to do what I did to install the CM7 but when I installed it from the recovery this error message appeared:
"Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5. It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted."
Is it really possible to root this ROM or do I have to stay in the CM7? :S
Any suggestion? Thank you very much for the support

poinu said:
Oh god, i didn`t know that.... succesfully done
but now... there's another problem, I installed the CyanogenMod7 and there are some things that I pretty dislike and I would like to install another ROM I have (it's a 2.2.1 rooted ROM) and I tried to do what I did to install the CM7 but when I installed it from the recovery this error message appeared:
"Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5. It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted."
Is it really possible to root this ROM or do I have to stay in the CM7? :S
Any suggestion? Thank you very much for the support
Click to expand...
Click to collapse
CLockworkmod 3 is a must for the gingerbread CM7 roms.
And clockworkmod3 recovery will not support "amend - scripting"
What u need to do is, to install the CM7 custom rom. Then install "Rom Manager" from market. Then use a different version of clockworkmod (downgrade to 2.5 version or try different versions). Then reboot to recovery from Rom manager itself. Then try to install the 2.2.1 rooted rom. It should work. If u have any issues with installing custom roms, then try different version of clockworkmod recovery (from Rom Manager). That's all.
explanation: http://forum.xda-developers.com/showthread.php?t=897026

it surely worked, thank you very much

I done the Alpharev s-off method but now when I try to install CM7 from CWM 3.0.0.6 it get stuck on "Installing update"
Any ideas?

diarmaid said:
I done the Alpharev s-off method but now when I try to install CM7 from CWM 3.0.0.6 it get stuck on "Installing update"
Any ideas?
Click to expand...
Click to collapse
what recovery do you use? did you dowloaded the zip correctly?

I upgraded to cwm4 and it worked perfectly.
That was a close one, it was a birthday present for the missus and i finally got it working on the morning of the birthday
Sent from my HTC Desire S using XDA App

Related

problem installing rom from fresh root

I am trying to install the ozzey ROM on my incredible I just got it and rooted it. I have Rom managr, astro file viewer and titanium backup installed. I know I can do it via update.zip or Rom manager but it always fails and says signature verification failed. I triple checked the file to see that it was in .zip not .zip.zip I had windows show the hidden file extensions. In Rom manager it says whole file verification failed along with signature file. Astro file viewer shows it as update and on the root of the SD card but still get the error. I haven't done nand unlock or backup, and I don't care about looking any apps its a new phone with nothing on it. Any suggestions or method instructions? Does the SD card have to be fat32? My SD card is the 2gb pny card. Thanks!
You should just be able to use the .zip, put it anywhere on your sd card. Boot into Clockwork Recovery (If you flashed the new recovery using reflash.exe from unrevoked), DO A NANDROID BACKUP (this is a full system backup), format the user data and cache partition (both options), select update with a .zip and select your preferred .zip file (in your case ozzeh's)
See here for more information and any questions: http://forum.xda-developers.com/showthread.php?t=709220
Any thoughts as to why I am getting those errors? Can I use the re flash tool and go into clockmode recovery and install througt that?
If you do not have clockwork recovery you're not going to be able to flash a ROM. You need to use the reflash tool before you can flash any ROMS.
i have clockwork recovery its on my phone but it still won't flash. Also I tried the reflash but it keeps saying that its interrupted, I uninstalled HTC Sync and it still doesn't work. I also tried to format the sd card to fat32 and ran clockwork recovery but it didnt work same error
It's not clear from your posts exactly what your error is. You say you have Clockworkmod Recovery installed but you keep referencing trying to flash from ROM Manager.
What happens when you boot into Recovery and try to flash the zip file from there?
I instaleld Clockworkmod from ROM Manager, 2.0.1.3 is the verison of clockworkmod I have installed on the phone. I then use ROM Manager to install ROM SD card and it fails, it says signature verification failed and whole-file verification failed. I booted into it and it says it can't find the file in /cache/ and it says verification failed so it aborts and reboots.
kingdavid216 said:
I instaleld Clockworkmod from ROM Manager, 2.0.1.3 is the verison of clockworkmod I have installed on the phone. I then use ROM Manager to install ROM SD card and it fails, it says signature verification failed and whole-file verification failed
Click to expand...
Click to collapse
You might want to try a different rom and see how it goes.
That makes no sense. You can't flash CWM Recovery from ROM Manager on the Incredible (although you can update a prior install, sort of); you have to use unrevoked's tool.
kingdavid216 said:
I instaleld Clockworkmod from ROM Manager, 2.0.1.3 is the verison of clockworkmod I have installed on the phone. I then use ROM Manager to install ROM SD card and it fails, it says signature verification failed and whole-file verification failed
Click to expand...
Click to collapse
I thought I remember reading in some thread that ROM Manager going to clockworkmod will not work because there is no write access.
You will have to use recovery reflash tool to install the clockworkmod recovery and boot into it.
You can find that information in this thread:
http://forum.xda-developers.com/showthread.php?t=706270
supagene said:
I thought I remember reading in some thread that ROM Manager going to clockworkmod will not work because there is no write access.
You will have to use recovery reflash tool to install the clockworkmod recovery and boot into it.
You can find that information in this thread:
http://forum.xda-developers.com/showthread.php?t=706270
Click to expand...
Click to collapse
I instaleld Clockworkmod from ROM Manager, 2.0.1.3 is the verison of clockworkmod I have installed on the phone. I then use ROM Manager to install ROM SD card and it fails, it says signature verification failed and whole-file verification failed
Click to expand...
Click to collapse
You can use Rom manager to boot into clockwork recovery and install the zip from there however, you can't use the feature "Install rom from sd card" within rom manager itself.
Well I tried using just ROM manager to boot into clockwork and I was able to but it still gives me the same errors. I can't do the unevoked flash it reboots then says the communications were intruputed. I deleted HTC synch and had the usb on both disk drive connection and HTC synch but it doesn't go through
kingdavid216 said:
Well I tried using just ROM manager to boot into clockwork and I was able to but it still gives me the same errors. I can't do the unevoked flash it reboots then says the communications were intruputed. I deleted HTC synch and had the usb on both disk drive connection and HTC synch but it doesn't go through
Click to expand...
Click to collapse
Did you ever successfully use unrevoked's flash utility? If you just downloaded rom manager and booted in to recovery without successfully flashing, that won't work.
If you're having problems using the reflash tool then I suggest you get that working and then try again installing a rom.
Use terminal emulator to verify u have su.. Just type su and click accept, if u can do that follow word for word unrevoked reflash method, including installing the correct drivers for adb.
Sent from my ADR6300 using Tapatalk
i just did terminal emulator and i get root acess, #, superuser comes up and allows me to access it, so I will try again but for some reason I get that communication was interuppted.
hey, thanks to all you guys I finally got the custom ROM to work. I did the revoked flash, i had to delete the old htc driver and start again, and once it finally flashed just mounted the sd card and installed, worked perfectly, thanks again!!
kingdavid216 said:
hey, thanks to all you guys I finally got the custom ROM to work. I did the revoked flash, i had to delete the old htc driver and start again, and once it finally flashed just mounted the sd card and installed, worked perfectly, thanks again!!
Click to expand...
Click to collapse
glad you got it working!
Congrats man, good to hear you finally got it working.

[Q] Missing boot menu item

I installed HTC Sync then, unistalled (keeping the drivers).
I installed the HBOOT modified drivers in device manager. it now says:
"Android device"
|
"My HTC"
I ran unrevoked3, successful, done. I did one click only and let it run.
I then downloaded Wildpuzzle 2.2 froyo (kept it zipped copied it to SDcard).
I powered down phone then pressed volDown and power together to go to boot menu.
my boot menu looks different to that of a video I saw:
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
shouldn't it look like this?:
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
HBOOT USB
note- it doesn't make a difference if my wildfire is plugged in to the pc, or if I'm running unrevoked at this point.
I wait for the update scan check thing, then I go down one to RECOVERY (If I'm running unrevoked at this point communication is lost) this takes me to ClockworkMod Recovery v (black screen, green text).
I choose "-wipe data/factory re" then "-install zip from sdc" choose my zip blaa blaa...
I see the install bar and it does it in a second, completed.
- reboot system now
I wait till phone is ready (have a sandwich very nice)
check menu/settings/about phone/software information.... still says:
Firmware version
2.1-update 1
Ahhhhhhhhh
I keep trying for three days different roms, typing here is last resort by papa roach!
HOW . DO . THIS . ?
edit your post and add a title.. please be more observant..
I hope you are not selecting the update.zip under the sdcard which might be the clockworkmod recovery image (rom manager based recovery installation keeps it there). Since clockworkmod recovery has that as an option above the zip file selection, it is a possibility (especially based on the sped of the update)
hackworks said:
I hope you are not selecting the update.zip under the sdcard which might be the clockworkmod recovery image (rom manager based recovery installation keeps it there). Since clockworkmod recovery has that as an option above the zip file selection, it is a possibility (especially based on the sped of the update)
Click to expand...
Click to collapse
No I'm not selecting update.zip
i have this same problem
please guide me ...i have this same problem...without hboot usb option in the boot menu...how can i install the hboot drivers?
u successfully rooted ur device. but have u installed clockworkmod recovery. i doubt this. and u also need to update the clockwork mod recovery. and then only u can install custom roms. dont forget to wipe all data and clear cache.

[Q] Flashing a radio- help needed

Hi all,
Today i was trying to flash the radio for my HTC wildfire
version: 13.55.55.2424H_3.35.20.10 (same as the one on my phone now)
What i have done:
1-renamed the radio to update.zip and put it on SD root
2- booted in recovery mode (CWM 4.0.1)
3- chosen install zip from sd card
but i got this message:
Installing update..
Amend scripting ( update.script) is no longer supported.
( some sentences including CWM 3 and ginger bread) don't remember them exactly
Installation aborted.
I rebooted phone and thanks to God it's working OK, communications OK.
What i have done wrong?
help will be appreciated
thanks in advance.
It needs Clockworkmod Recovery 2.x. So, you can get that from within ROM Manager App.
- Open ROM Manager
- Select Install Clockworkmod Recovery
- This will install v2.5.0.7 on your SDCard (It wont touch your v4.x)
- Then select Reboot into Recovery from within ROM Manager.
- This will start Clockworkmod 2.6.0.7, then flash the radio as normal.
Alternatively, get this attachment:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
Flash in in Clockworkmod 4.0.1, it will give you temporary 2.5.0.7, then proceed as normal.
Thanks a lot 3xeno
i have done the first on and it worked
but
when i installed the updat.zip
some lines was showed but it was very quick i couldn't read them
but the process took about 5 seconds or maybe less
is that normal??
how can i know that i have flashed the radio succefuly?
the phone is working OK.
Yes, its normal. When you follow the second procedure, it gives you temporary 2.5.0.7.
I hope you followed only one of the procedures though. (Either go via the ROM Manager App way, or go via the update1.zip way, not both)
When you flash a Radio, it says "The Radio will install on Reboot". Then, you select "Reboot System Now" in Clockworkmod, and it will reboot your phone, and it will state "Writing Radio Image". This process takes some time, after which your phone reboots again and starts normally. When this happens, you can be sure you have reflashed the radio properly.
i followed the first
i have reeboted into CWM 2.5 ( green color)
then i flash the update.zip by install zip from sd card
it shows quick lines
and i don't see this "The Radio will install on Reboot"
the back to recovery menu
i choose reboot system now
the phone reboot as normal without this "Writing Radio Image"
any thing am missing?
Don't flash the update.zip in Clockworkmod 2.5.0.7 (Green Text). The update.zip is an alternative to be flashed in Clockworkmod 3.x/4.x (Orange text) which will reboot your system in Clockworkmod 2.5.0.7. (ie - It is to be used only if you didn't use the ROM Manager method. Since you have installed Clockworkmod 2.5 using ROM Manager, you can delete the update.zip, you no longer need it)
Once you get to Clockworkmod 2.5.0.7, Flash the Radio's Zip using the same procedure. (Install Zip from SDCard > Select Radio Zip file). To reiterate, theres no need for update.zip once you are in Clockworkmod 2.5
Thanks a million 3xeno
flashed the radio Successfully
what i was doing wrong that i have renamed the radio zip file to update.zip
method that i have done for anybody hwo wants to do that (thanks to 3xeno):
1- put the radio file as it is on SD root (don't change the name of zip file)
2- go to rom manger and choose flash clockworkmod recovery
3- from rom manger choose reboot into recovery
(will reboot in CWM 2.5) green text
4- choose install zip from sd card
5- press go back (back button won't work) go to the bottom of menu and you will find the ++back++
6- choose reboot system now and wait til it finish.
I don't think changing of filename from radio.zip to update.zip will affect installation of radio (as long as you haven't extracted the zip).
But what happened is (I guess) ---
You are changing the radio.zip to update.zip and kept it at the root of sdcard. Then if you open Rom manager and flash recovery, the update.zip related to radio will be overwritten by cwm2.x update.zip . And vice versa if you have flashed Rom manager cwm2.x first and then copied radio update.zip to root of sdcard.
So basically one of the needed things are missing ( = being overwritten) which interfere with the process. Anyway nice that you made it.
Sent from my HTC Wildfire using XDA App

[q]Stock rom

Can some one suggest me where download and how installa the stock rom for wildfire.
Now I use a cynogen 7 and i want go back to original froyo + sense
There are 3 primary ways to do that:
1) If you had taken a Nandroid Backup before installing CM7, Just restore that. (But I am assuming you didn't, hence you are asking this)
2) If you want to retain root and Clockworkmod Recovery, just flash this ROM. Its Stock Froyo + Sense:
http://forum.xda-developers.com/showthread.php?t=877977
The process to install that is as follows:
- Download this attachment and place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash in Clockworkmod 3.x or higher. This will give you temporary Clockworkmod 2.5 (Green Text)
- Then, perform a Data Wipe, and install the ROM Zip file as normal.
3) If you dont want to retain root and Clockworkmod
- Download the Froyo RUU from Shipped ROMs (Froyo WWE 2.22.405.1 EXE) from Shipped ROMs:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect Wildfire to the PC, and simply run it.
Hi, I'm back
Just 2 questions
I downloaded both files
i copied both files on sd then i started rom manager and tapped on first field to
Flask clockwork mod recovery
Then? what i have to do to revert to Clockworkmod 2.5?
i downloaded this file from the link Safe_Buzz_Froyo_HTC_WWE_2.22.405.1_Rooted
is it true?
3xeno said:
2) If you want to retain root and Clockworkmod Recovery, just flash this ROM. Its Stock Froyo + Sense:
http://forum.xda-developers.com/showthread.php?t=877977
The process to install that is as follows:
- Download this attachment and place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash in Clockworkmod 3.x or higher. This will give you temporary Clockworkmod 2.5 (Green Text)
- Then, perform a Data Wipe, and install the ROM Zip file as normal.
Click to expand...
Click to collapse
I cant find the website ther's a mirror if i want go back to stock with no root rom
3xeno said:
3) If you dont want to retain root and Clockworkmod
- Download the Froyo RUU from Shipped ROMs (Froyo WWE 2.22.405.1 EXE) from Shipped ROMs:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect Wildfire to the PC, and simply run it.
Click to expand...
Click to collapse
Ariakan said:
Hi, I'm back
Just 2 questions
I downloaded both files
i copied both files on sd then i started rom manager and tapped on first field to
Flask clockwork mod recovery
Then? what i have to do to revert to Clockworkmod 2.5?
i downloaded this file from the link Safe_Buzz_Froyo_HTC_WWE_2.22.405.1_Rooted
is it true?
I cant find the website ther's a mirror if i want go back to stock with no root rom
Click to expand...
Click to collapse
I can't understand what you mean by your first question at all. Clockworkmod Recovery flashed via ROM Manager is temporary. Your original Clockworkmod will remain untouched. So if you are using the option called Flash Clockworkmod Recovery in ROM Manager, then the next step is to select Reboot into Recovery from the ROM Manager App again, then flash the ROM File. In this case, you can discard the update1.zip file, as it has no significance.
As for your second question, mirrors of the EXE RUU can be found here:
http://forum.xda-developers.com/showthread.php?t=1275680
My first question is simple
on my phone i have rom manager and there is a row named "Flask clockwork mod recovery"
but
i don't know how go back from cynogen to stock rom using clockwork mod recovery
can you help me step by step?
and the stock [with no root] rom for wildfire with froyo is this one?
RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.2 4H_3.35.20.10_release_160191_signed.exe (This RUU contains HBoot 1.01.0001)
i need only to connect the phone to pc and run the exe?
First, decide what you want to do - Flash the EXE RUU, or Flash the Safe Flash ZIP File. If you decide to flash the Safe ZIP file, you will keep Clockworkmod Recovery, which will allow you to flash stuff later. If you select the EXE RUU, Clockworkmod Recovery will be removed, so you will NOT be able to flash anything, like ROMs, Kernels etc.
Once you have decided, here are the steps:
1) If you decide to install the Safe Flash ZIP File
- Download the Safe Flash ZIP from here:
http://forum.xda-developers.com/showthread.php?t=877977
Rooted / Unrooted, Its upto you which version you want. Rooted version has Superuser, so you can run apps like Titanium Backup etc. Unrooted doesnt have Superuser, so you cant run root apps.
- Place this file on your SDCard
- Now, open ROM Manager
- Select Flash Clockworkmod Recovery. Then make sure you select 2.5.0.7. NOT a version beginning with 3.x, 4.x or 5.x
- Once it is installed, in ROM Manager, the next option will be 'reboot into recovery'. Select that
- Once you select that, then you will be taken to Clockworkmod 2.5.0.7 (Which has all its options in Green coloured Text). Here, select "Wipe Data / Factory Reset". This step will erase all data on your phone (Not on your SDcard, Just your phone data. This step is essential when changing ROMs)
- Lastly, select "Install Zip from SDCard", and then, select the ZIP file you placed on your card at the beginning of this step. Let it install. Once installed, Select "Reboot System Now", and let the phone reboot. Done
2) If you decide to run the EXE RUU
- Its pretty much 1 step. Connect the phone to your PC and run the EXE File. It will automatically perform the install. If you get an Error 131 - Customer ID Error, you will need to create a Goldcard. There's a guide for that here:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
Did u perform wipe data n clear cache before flashing?
Sent from my HTC Wildfire using XDA Premium App
same question
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
shemulweb said:
same question
I tried with mode 1
after choose install from sd and select yes it took hours but notting happen
then i rebooted my phone and it's stukked on clockworkrecovery but the version is the 3 not 2.5.0.7
i cant install stock rom from version 3
how i can go back to cwr 2.5.0.7
Click to expand...
Click to collapse
Flash this zip file in CWM3: (Install Zip from SDCard > Choose Zip from SDCard. (Don't select the "Apply update.zip option)
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
It will give you temporary 2.5.0.7, then you can flash the ROM. (It is temporary, so, everytime you want CWM 2.5.0.7, you will have to flash this Zip file)

[Q] Failed to install dalvikcache2sd (oxygen)

Hi all, Yesterday I flashed oxygen and all is fine. Restored apps, sms, contacts etc, happy with it but thought I'd install the dalvik cache script so I'd have a bit more memory. I downloaded file dalvik-cache2sd and put it on sdcard.
Went to clockworkmod, choose zip from sdcard, install zip from sdcard then it starts then I get this:
installing: /sdcard/dalvik-cache2sd-signed.zip
Finding update package...
Opening update package...
Installing update package...
Amend scripting (update script) is no longer supported.
Amend script was deprecated by Google in android 1.5.
It was necessary to remove it when upgrading to ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted.
I've no idead what this means or what to do next...Any advice anyone...
try to flash it with rmd recovery :http://forum.xda-developers.com/showthread.php?t=1137763
Since version 3 clockworkmod uses a newer updater script. Some scripts are not updated to this version, so you have to flash an older recovery like RMD or 4EXT via fastboot.
Thanks for advice. I wasn't going to play around changing recoveries because I guess it's not that importart to install the script BUT I went to update my radio and the same message came up. WTF...if I change to this recovery (how can I do it) will I have to change anything else, I guess it means I won't have cwm recovery but amon-ra recovery, am I right. Please guys clarify this for me as getting a little confused... Thanks
Are you S-OFF or S-ON?
SwiftKeyed from dGB with Transparent XDA App
Have a read of the oxygen forum. It has the script you will need and if you can't find it there the redux script works as that is what I use.
Check out oxygen.im
sent from my Oxygen desire
I'm s-off (revolutionary method)and I found the oxygen dalvik2sdscript no problem, it's in the root of my sd card along with the latest radio...that I can't install. Would it work if I renamed the radio file to update or something similar ? I wonder....
Flash the dalvik zip file the same way as you do a rom in recovery
As for the radio file you need to use fastboot. But if you have changed your h-boot make sure it has enough space to flash the radio or you could end up with a permanent brick. I believe you need a min of 25mb but check this before you flash the radio.
Hope this helps
To flash anything like alternative recovery, radio, or hboot it is best to use fastboot (back button and power)
sent from my Oxygen desire
There is absolutely no need to change radio here. Just changing the recovery to 4EXT or RMD (currently the most recommend recoveries) will do the trick. This operation can be done either with fastboot or with Android Flasher.
For fastboot check my guide. For Android Flasher read the opening post.

Categories

Resources