Hi!
I'm using MIUI XJ A2SD/A2SD+ 1.4.29 - 2.3 FINAL
my problem is that a2sd isn't working any more after flashing the new rom.. I used connectbot for making a2sd ready. the usual thing: su, a2sd zipaign and a2sd cachesd
but when i type in: a2sd zipalign 2 errors appear:
[X] No a2sd.swap environment variable found.
[X] Problem detected: Darktremor Apps2SD may not have ran during boot. Cannot read a2sd.mountpoint.
how can i solve it?
Instead of a2sd zipalign you can type:
su
a2sd reinstall
Click to expand...
Click to collapse
Your Desire will restart. Then to move the dalvik-cache to ext type:
su
a2sd cachesd
Click to expand...
Click to collapse
Related
ok this is very confusing i moved from wildfire to desire
on wildfire we used darktremor for a2sd etc with cammand
on desire im struggling to figure out how to cache2sd
im currently using this rom
[Sense2.1 GingerBread]InsertCoin CM7/A2SD+
but dont understand the thing about cm7 hboot wat does it do
and is there a terminal cammand to cache2sd????
daddyspud said:
but dont understand the thing about cm7 hboot wat does it do
Click to expand...
Click to collapse
The CM7 HBOOT will shuffle around your NAND to 130Mbs System 5Mbs Cache 302Mbs Data, stock it's 250mbs System 40Mbs Cache and 147Mbs Data.
Basically you get 302Mbs of internal app space where as using a stock Sense ROM you get 147Mbs. You'll need AlphaRev's S-OFF to perform it though.
If your installed ROM uses Darktremors a2sd script you have to type
Code:
su
a2sd cachesd
in terminal (like connectbot) on device.
From PC its
Code:
adb shell
a2sd cachesd
Try!
yh i tryed the rom does not use darktremor im know how to wen usin darktremor
I'm trying to move dalvik back to data partition by removing it from the init.d script. but for some reason after I reboot my ext partition is gone..
What am I doing wrong?
What ROM?
What Script?
davebugyi said:
What ROM?
What Script?
Click to expand...
Click to collapse
Cool SagaS v10
Cyanogen's script
I assume with cyanogen's script you mean the a2sd script by darktremor because this comes with cyanogenmod (as far as I know). If you use darktremor's a2sd script, you can move dalvik-cache back to internal with the command
Code:
a2sd nocache
in terminal emulator.
MatDrOiD said:
I assume with cyanogen's script you mean the a2sd script by darktremor because this comes with cyanogenmod (as far as I know). If you use darktremor's a2sd script, you can move dalvik-cache back to internal with the command
Code:
a2sd nocache
in terminal emulator.
Click to expand...
Click to collapse
It's not darktremor's script
* Cyanogen A2SD script tweaked by me, moves both Apps and Dalvik to EXT.
I understand that I need to modify the 40a2sd script in /system/etc/init.d. So I did, I removed all the dalvik-chche mentioning, pushed it back there while in recovery mode, reboot and no ext partition
Yishtabach said:
It's not darktremor's script
* Cyanogen A2SD script tweaked by me, moves both Apps and Dalvik to EXT.
I understand that I need to modify the 40a2sd script in /system/etc/init.d. So I did, I removed all the dalvik-chche mentioning, pushed it back there while in recovery mode, reboot and no ext partition
Click to expand...
Click to collapse
just reflash the standard one in the nighty thread
that only move /data/app
I do it by this guide usually.
Had to re install the rom with the modded 40a2sd file, worked like a charm afterwards. Thanks for the help!
Hello,
Could you tell me the most efficient mod for cyanogen rom 7.2 ?
Thank you in advance
Miui XJ a2sd 1.7.x was the first Miui i flashed on my desire, I tried activating the a2sd with the zipalign and cachesd commands but it didn't work.
Searching the internet for a fix i read that it's a common problem and flashing the darktremor a2sd script should fix the problem.
I searched everywhere but i couldn't find the script to download.
I then decided to flash the d2ext, but it was really slow, and i had some issues with deleting files.
In the end i gave up and returned to froyo.
Once again i flashed the Miui xj a2sd 1.8.12 in the hope that things will run different this time, but i ran out of memory very fast, my phone shows that i have only 20 MB of internal memory left, and the a2sd has like 450 MB.
I can't install anymore apps without seeing the low memory sign, so is there anyway to fix this?
Sent from my HTC Desire using XDA App
Activate A2SD+ with commands from a terminal emulator
A2SD zipalign
A2SD reinstall - this did it for me.
Thanks alot for the help, that did work.
I tried the aligning first but didn't work, it said that the script didn't run on boot, so i used the reinstall command and now i have 90 MB free internal memory.
I'm going to install more apps to see if the a2sd is working, or if i have to do this everytime i run out of memory.
Nope. You can do this only once. Reinstall actived the a2sd for you - because before it was not loading properly.
Sent from my customized HTC Desire using TTP
davebugyi said:
Activate A2SD+ with commands from a terminal emulator
A2SD zipalign
A2SD reinstall - this did it for me.
Click to expand...
Click to collapse
im having the same problem as above.im trying to enter the commands but i got an "access denied" response.what is the full command?
First you must type in:
su
a2sd reinstall
Click to expand...
Click to collapse
thanks a million guys.. been searching for an answer to my low memory...this fixed it...i love miui xj rom been using it for about a week i think i will keep it for now
thanks again davebugyi
davebugyi said:
Activate A2SD+ with commands from a terminal emulator
A2SD zipalign
A2SD reinstall - this did it for me.
Click to expand...
Click to collapse
i've tried this as well but still getting insufficient space when trying to download anything larger than 1mb from market..
xcly said:
i've tried this as well but still getting insufficient space when trying to download anything larger than 1mb from market..
Click to expand...
Click to collapse
you need to flash the cm7r2 market cache fix from the MIUI thread..
Hi guys,
I installed the ROM and type the commands like in the guide (su - a2sd install). After the reboot I type "df" in the terminal and I can see that the apps are both in the "data" folder in the internal memory and in the "data/app" folder in the partition on the SD memory.
If I install some application this are installed both in the two (SD and internal) memory.
In my opinion the apps must be only in the SD partition and not in the internal memory, anyone can help me? please
bye
Jerry
hey,
do you try :
HTML:
a2sd cachesd
then reboot ??
Logimann said:
hey,
do you try :
HTML:
a2sd cachesd
then reboot ??
Click to expand...
Click to collapse
I have resolved installing the darktremor app2sd script. It works perfectly.
What all do i need to do to get dta2sd working on cm7.2 and get rid of the cm a2sd? Please include links to zips as well?
Sent from my PC36100 using Tapatalk
i hope im right, but i would assume that its thee same as with any rom... i used dt a2sd on sense and my current CIUI rom, which is a mix between CM and MIUI. here is a link
http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta04-signed.zip
flash this from the sd card in recovery.... then dl a terminal emulator and enter the following commands:
su [ENTER]
a2sd reinstall [ENTER]
you can also do the following to move cache to sd to free up more space if needed:
a2sd cachesd [ENTER]
hope this helps
dbenney said:
i hope im right, but i would assume that its thee same as with any rom... i used dt a2sd on sense and my current CIUI rom, which is a mix between CM and MIUI. here is a link
http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta04-signed.zip
flash this from the sd card in recovery.... then dl a terminal emulator and enter the following commands:
su [ENTER]
a2sd reinstall [ENTER]
you can also do the following to move cache to sd to free up more space if needed:
a2sd cachesd [ENTER]
hope this helps
Click to expand...
Click to collapse
Well put. That'll do it.
Thanks. I figured it out, just seemed to be bootlooping because it rebooted about 8 times, but it worked out. Thanks though
Sent from my TRON-itized EVO