Develop Bugs

[ROM] [GSM] CM7 Gingerbread Beta 2012-02-19

Hi everyone,
First, read the readme.txt in the zip file.
You flash it at your own risk. Backup everything. Learn how to use Heimdall. If it eats your dog it's not my problem . Many things are broken - post about it in the thread if nobody posted before. If you have any idea how to fix things, post too or PM me.
Requirements: GSM (Euro, US ATT/TMO tabs), with JQ1 (Gingerbread) unprotected bootloaders that can run Euro JQ1 ROM and gt-p1000_mr.pit partitioning.
Modem versions:
ATT: use I9000UGJK3 modem (this is what I am using)
TMO: try JK5
Euro: reports say that JK5, JPZ modems work
HK: user reports JK5 modem works.
CDMA: This ROM does not support CDMA Tabs.
LTN: experimental kernel included.
The archive with the build with Heimdall is here http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-08-05.zip
Please use heimdall to install. This zip file is not for flashing with CWM. Unzip and read the readme.txt in the zip file. Flash using the Heimdall command line (below).
The update zip for CWM is here http://gtab7.nexus-lab.com/cm7sgt/cm-7-20120805-UNOFFICIAL-galaxytab.zip, (GSM only, no LTN), please be sure to flash it from recovery that supports EXT4 or flash it once so it updates kernel/recovery, reboot to new recovery and flash it again. If you encounter any problems, use the Heimdall version.
P1000L/N
There is experimental P1000L kernel and bootloaders included in LTN directory in Heimdall package. It should work on P1000L and maybe P1000N.
Big thanks to Humberos for patches and testing. Adventureous souls with Latin Tabs please try it and report how it worked for you. You should have Gingerbread bootloaders and partitioning done first, so it should be easy if you are already running Gingerbread on your P1000L/N.
Installation using Heimdall
normal update from previous CM7 version, or a flash from another Gingerbread ROM:
Code:
heimdall flash --kernel zImage --factoryfs factoryfs.ext4
full flash and repartition:
Code:
heimdall flash --repartition --pit gt-p1000_mr.pit --primary-boot boot.bin --secondary-boot sbl.bin --kernel zImage --factoryfs factoryfs.ext4 --cache cache.ext4 --dbdata dbdata.ext4
Please be careful and double check your Heimdall command line when you flash bootladers, you may brick your Tab pretty bad.
If you get stuck on first reboot after install, or your settings aren't saved it means your data partitions need to be reformatted to ext4. This should be handled by setup_fs in init.rc.
If it didn't happen, start adb and run
make_ext4fs /dev/block/mmcblk0p2
make_ext4fs /dev/block/stl10
make_ext4fs /dev/block/stl11
Or try full wipe in recovery.
make_ext4fs is slightly wonky so you could use "/system/bin/mke2fs -t ext4 -m 0" instead (recovery is also using make_ext4fs internally to wipe partitions)
Samsung apps, Swype, Gapps etc
This is an unofficial port of CyanogenMod. I am striving to give us the pure CyanogenMod experience on Galaxy Tab.
So, there are no Samsung apps and don't ask for them.
There is no TouchWiz and don't ask for it.
It comes with ADW Launcher and if you want anything else, there is plenty of launchers in the Market.
If you want Google Apps, get it from the usual place http://goo-inside.me/gapps/ and install from recvery after flashing update.zip. The Heimdall version has Gapps integrated right now.
There is one stupid annoyance on Google sign-in welcome screen. It asks to slide open the keyboard (which we don't have and for now I can't find this setting). So skip the whole set up and sign in to Google account from Settings->Accounts&Sync.
Swype: there is no Swype. Since Swype has a policy of allowing Swype on modded ROMs as long as the original ROM had Swype integrated, if somebody cares to make flashable zip with Swype I can link it from OP.
Market issues.
Market 3.x has much stricter rules about DPI and device checks. So very often it shows apps as not compatible with CM7 on GalaxyTab.
Just go to Settings->Applications and uninstall updated Market it will go back to 2.x for a while.
Or try tool like OldMarket http://forum.xda-developers.com/showthread.php?t=1240344
You can also change build.prop yourself, you will need to change two lines:
ro.build.tags=test-keys to ro.build.tags=release-keys
and
ro.sf.lcd_density=200 ro.sf.lcd_density=240
reboot, delete Market data from Settings->Applications
Big thanks to junkshow for investigating it.
sources at http://github.com/cm7sgt
How to report bugs
If you think you have found a bug.
- verify you can repeat it, make sure it is not caused by the fact you did not wipe the device by rebooting to recovery and using wipe when you first installed CM7. Particularly when coming from other ROMs that use ext4. When coming from RFS your partitions should have been reformatted on first boot but wiping after install will not hurt.
Please read existing open and already closed issues at http://github.com/cm7sgt/android_device_samsung_galaxytab/issues
If your bug is new.
Please see if it is upstream (general CM7 not related to Tab) bug, see in CM7 issues tracker http://code.google.com/p/cyanogenmod/issues/list
If it is already there, please stop or add a comment there.
If the bug is about generic issue, please try to verify it it also happens on other CM7 devices. If so, you should post it in CyanogenMod issues.
If the bug is Galaxy Tab specific, like, some hardware functionality is missing, some driver not working. Dialogs messed up because of resolution etc, this means it belongs to Galaxy Tab device issue tracer and I can fix it.
In this case please open new issue here http://github.com/cm7sgt/android_device_samsung_galaxytab/issues
Please use pastie.org or something like that for posting logs.
SDCARD controversy
By default, the real micro SD is /mnt/sdcard, the internal mmc is /mnt/sdcard/external_sd, like in Galaxy S CyanogenMod builds.
If you don't like it, you can swap the devices, go to Settings -> CyanogenMod settings -> Application and check Use internal storage [ ] checkbox.
Reboot, now internal will be /mnt/sdcard, external will be /mnt/sdcard/external_sd like in Samsung's Android.
In recovery, real sdcard in /sdcard, internal sdcard (embedded MMC) is /emmc.
If you want to flash zip from /emmc just go in recovery "install zip from sdcard" -> "choose zip from internal sdcard" -> choose whatever you want to flash.
--
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Current status:
Voice calls: OK (make sure to use modem.bin compatible with JQ1 RIL)
3G data: OK
Wifi: OK
Bluetooth: OK
Camera: Photos OK, video encoding (movie capture) back OK, front corrupted
Sensors: seem OK
GPS: OK
Recovery and initramfs: CWM, partitions get mounted, wipe works, havent tried backup/restore
Video playback: overlay and copybit work, OMX libraries are in and decoding works.
Changelog:
2012-08-05 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-08-05.zip http://gtab7.nexus-lab.com/cm7sgt/cm-7-20120805-UNOFFICIAL-galaxytab.zip
Fixed Bluetooth MAC address issue. Now it is read correctly from EFS. Thanks to ableeker.
2012-07-28 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-07-28.zip http://gtab7.nexus-lab.com/cm7sgt/cm-7-20120728-UNOFFICIAL-galaxytab.zip
Update to latest from CM7 git.
2012-02-19 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2012-02-19.zip http://gtab7.nexus-lab.com/cm7sgt/update-cm-7-2012-02-19-Beta-GalaxyTab-KANG-signed.zip
Update to latest from CM7 git. set default DPI to 240 to fix market issues, advanced users can set any DPI they want anyway.
Go back to stock dialer layout because it has changed a lot.
2011-11-02 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2011-11-02.zip http://gtab7.nexus-lab.com/cm7sgt/update-cm-7-2011-11-02-Beta-GalaxyTab-KANG-signed.zip
use android socket for wpa_supplicant control interface. anyone upgrading to this version please delete their /data/misc/wifi/wpa_supplicant.conf
thanks to jt1134, removed extra field in mfc interface in kernel which prevented it from working with aries OMX libraries
updated media_profiles.xml to expose 1024x600 and 800x600 resolutions for camcorder. its not perfect but at least video recording works now. front cam produces broken video.
2011-10-31 http://gtab7.nexus-lab.com/cm7sgt/tcm7beta-2011-10-31.zip http://gtab7.nexus-lab.com/cm7sgt/update-cm-7-2011-10-31-Beta-GalaxyTab-KANG-signed.zip
update to latest from git. we are little past 7.1.0.
fix key setting for AP mode
new init.rc/init.gt-p1000.rc unified with CDMA device
2011-10-09
move download cache to /data/cache_download and system dalvik cache to data, it should fix download issues with large APKs
fix bluetooth keyboard keypad rotation issue
move touchscreen event rotation to kernel to to clean up frameworks/base
use switchable pair and new stacked mounts in vold for /mnt/sdcard and and /mnt/sdcard/external_sd
2011-09-20
Update to latest from git.
Merged P1000L/N kernel. P1000L kernel included in build.
Voodoo Sound update to V10. Switch to JHASH3 hash function in kernel.
Disabled NEW_AP in Wifi driver, fixed hotspot mode.
2011-08-07
Update to latest from git. Android 2.3.5.
Added BLN kernel driver and LIGHT_ID_NOTIFICATIONS -> /sys/class/misc/backlightnotification/notification_led device to liblights. Big thanks to Neldar.
Fix geolocation/networklocation settings in props and frameworks' config.xml
Update EGL driver and pvrsvrkm kernel driver to latest from EF17 Sprint GB release.
2011-07-20
Update to latest from git.
Merge changes from Sprint GB kernel source release. Merge relevant kernel changes to up to 2.6.35.10.
2011-06-21
Enable CRT screen off/on animation.
Add virtual flag to capacitive buttons to enable vibration when they are pressed.
Increase HCI baud rate to 3M, hopefully this will help A2DP issues with BT keyboards.
2011-06-13
Rotary Lockscreen bitmaps and Twelve Key Dialer portrait and landscape layouts have been fixed by Fabrizio. Big thanks!
Fixed wrong parameter to ril->setCallVolume, hopefully will make call audio better.
Switched to use Samsung's binary brcm_patchram_plus with the same parameters in init.rc. Bluetooth SCO works now. Magic?
2011-06-06
Add attribute for available frequencies, fix cpufreq sysfs permissions so CMParts can access it.
Change compile options for kernel to cortex-a8. Enable Tiny RCU.
Fixed calls from other places in the kernel that used olde speed levels and caused frequency spikes to 1.2GHz.
Fixed Low Power Mode (it properly starts /lpm.rc and displays charging animation).
2011-06-05
Added 10-point Multitouch to kernel (thanks to The_Double and hoss_n2)
Added overclock (1.4GHz) and undevolt (thanks to Richard Trip and Koxudaxi)
Added Voodoo Sound V9 (thanks to Supercurio and Richard Trip)
Switched to (some) Crespo EGL SOs, hopefully will fix some OpenGL issues.
2011-06-03
Add usb_connected switch to kernel, fixes usb mounting and usb connection detection.
Use mke2fs instead of make_ext4 for formatting in OTA and setup_fs. Should be more reliable.
Added download mode to reboot menu.
2011-05-30
Fix problems with headphones/headsets and libaudio, kanged common-aries libaudio.
Added OMX libraries and overlay from common-aries.
2011-05-28r2
Fixed setup_fs so it properly formats partitions.
Enabled more tablet tweaks (soft buttons).
Removed format for .android_secure in recovery, should fix wipe.
2011-05-28
Switched to Gingerbread kernel 2.6.35.7 recently released by Samsung.
Use JQ1 binary drivers for OpenGL, sensors, lights, copybit, overylay, camera etc, so they all work!
Portrait is default orientation now, ro.sf.hwrotation=90 is set and touchscreen events are rotated in input layer so they match.
<cut short, more in readme.txt>
Big thanks to noobnl, coolya, codeworkx, rotohammer, KhasMek, deodexed, captainkrtek, lilstevie, a_snowman, frusso, humberos, koxudaxi, spacemoose, oldmacnut and others for help, advice, testing etc etc.
DEVS ONLY HERE ---------------------------------------
How to build CYanogenMod 7 for Galaxy Tab GT-P1000
First, please read this article http://wiki.cyanogenmod.com/index.php?title=Compile_CyanogenMod_for_CaptivateMTD
You will need the same prerequisites.
Then
Get repo as described there. I put mine in /usr/local/bin
Sync Android tree. You need to use manifest from cm7sgt github.
(If you have more/less than 4 cores modify your -j4 accordingly)
Create a directory for your Android, you will need oer 10GB of free space. It helps a lot to put it on SSD.
repo init -u git://github.com/cm7sgt/android.git -b gingerbread
since kernel.org gits are still down, until they are back up you need to sync repo tool from github, so use this command line, thanks to Disgustipated for pointing it out.
curl https://raw.github.com/android/tools_repo/master/repo > ~/bin/repo
chmod a+x ~/bin/repo
repo init -u git://github.com/cm7sgt/android.git -b gingerbread --repo-url=git://github.com/android/tools_repo.git
repo sync -j4
Grab Rom Manager as described.
You can't (no script) and don't need to copy proprietary files, everything is already included in vendor git.
Setup your android build environment and choose device to build:
. build/envsetup.sh
lunch cyanogen_galaxytab-eng
make -j4
There, it should build with no issues. Sometimes it will complain about API changes, run make update-api then.
From here you have two options.
1. Build Heimdall images. You will need kernel with loop support, losetup, ext4 tools (mkfs.ext4).
cd device/samsung/galaxytab/tools
./buildimage
it will grab stuff from out and create ext4 images. Flash with Heimdall.
2. Build update.zip
make -j4 bacon
How to build kernel
First, you will need the arm toolchain from CodeSourcery. You need arm-2009q3-68-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
From http://www.codesourcery.com/sgpp/li...q3-68-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
Unpack it in /opt/toolchains. as root
mkdir -p /opt/toolchains
cd /opt/toolchains
tar -xjvf arm-2009q3-68-arm-none-eabi-i686-pc-linux-gnu.tar.bz2
Then in your CM7 tree
BEFORE YOU BUILD CM7 TREE
cd device/samsung/galaxytab
./kernel.sh defconfig
./kernel.sh modules
This will configure the kernel and build and copy modules to prebuilt directories. The kernel build directory is out/target/product/galaxytab/kernel_build
Build your android tree normally so initramfs is created.
Then again
cd device/samsung/galaxytab
./kernel.sh kernel
This will build the kernel using the initramfs in recovery/root and update prebuilt kernel image.
(for Latin kernel use kernel_ltn.sh script and use kernel_ltn file it produces)
Now you need to run make on your android tree again so boot.img is updated.
And proceed to buildimage or make bacon as usual.

sweet news

P1000L tabs too?
I can test for you.

ivannw said:
P1000L tabs too?
I can test for you.
Click to expand...
Click to collapse
AFAIK P1000L hardware is different so it will need different kernel

How do we check which bootloader we have?

TheGrammarFreak said:
How do we check which bootloader we have?
Click to expand...
Click to collapse
If you installed Euro JJ4 ROM you probably have JJ4 bootloader.
It will probably also work with stock ATT and TMO bootloader but I cannot guarantee that. I have JJ4. People have reported issues using Euro ROMs on ATT bootloaders, I believe the same issues will show up in my CM7.

Great news. I have polish rom maybe i help. galaxy tab jm6

That is amazing work!
Well done.

Which issue r u tlaking abt? I have recent att tab went straight to jme no issue. Lemme know if i could hrlp testing. Ubuntu & heimdall ready. I actually pulled your old cm6 and cp kernel-tab and what not to cm7 but failed at lunch cyanogen...
Sent from my GT-P1000 using XDA App

quattr0 said:
Which issue r u tlaking abt? I have recent att tab went straight to jme no issue.
Click to expand...
Click to collapse
some white lines while booting etc. if JME works for you my stuff should work too.

TheGrammarFreak said:
How do we check which bootloader we have?
Click to expand...
Click to collapse
I'm no expert but this seems obvious (for me). If you have a linux box, do a "strings boot.bin" on a protected bl (extract from JMF downloaded from samfirmware for instance), you will see these lines
PBL: Error.. sbl verification failed..
PBL: booting stop!
My at&t backup boot.bin does not have the above 2 lines.
Just my guess.

Technomancer said:
AFAIK P1000L hardware is different so it will need different kernel
Click to expand...
Click to collapse
Can you help me or give the way to compile the correct kernel?
Sent from my GT-P1000L using XDA App

I can't wait for this... My Tab seems to just be less awesome without the love CM gives to Android.

installed but touch doesnt works.
what is the next step?

ivannw said:
installed but touch doesnt works.
what is the next step?
Click to expand...
Click to collapse
this is because of the different hardware!
if ur not a developer, leave it till it is stable because u are missing some necessary features for everyday use!

landroid thanks for your response.
btw i wanna learn how to fix that. can you give me directions ?
first of all I'll try to get stock rom compiled.

too bad again not for CDMA tab user

ivannw said:
landroid thanks for your response.
btw i wanna learn how to fix that. can you give me directions ?
first of all I'll try to get stock rom compiled.
Click to expand...
Click to collapse
First off all u need to find the kernel source for ur tab (i think P1000L, right?) And then apply the patches technomancer made to the kernel but this is very hard to do! The best thing would be to contact technomancer! And if i find some spare time tommorrow ill try to compile a P1000L kernel for u but i cant guarantee that if i manage to do that everything works! But i knoe how to compile kernels from source so it should not be a problem!
Sent from my GT-P1000 using Tapatalk

ivannw said:
landroid thanks for your response.
btw i wanna learn how to fix that. can you give me directions ?
first of all I'll try to get stock rom compiled.
Click to expand...
Click to collapse
Get sources for your kernel from opensource.samsung.com.
Compile it with gingerbread branch of this initramfs https://github.com/cmsgs/android_initramfs_galaxytab
See what happens ;-)

Look awesome!!

[26.July.2011] AngelDeath Kingdom Sense 3.0 Release v1.5 FINAL!

AngelDeath Presents: TMOUS & EU Kingdom Sense Rom V1.5 FINAL!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on Kingdom WWE 0.81.651.0 Kernel: TyTung R10 with patches from everywhere.​
Thanks and Credits to the following Chefs/Creators/Dev's: DungPhp, Derek, Imilka, Cmylxgo, The RCMix Team, Capychimp, i00, TyTung, Virtuous, Seo​Thanks to the following Testers: JHR5474, TheGeorgiaSwagger, Kameirus.​Thanks to Carl1961 for helping with the Logo.​
The ROM has been a long and Painstaking process of trying to stablize it ever since it came out, and after countless hours, sleepless night, endless testing, forever flashing, constantly patching, and alot of cursing, here is my version of "Kingdom".
What Works:
Just About Everything!
What Doesnt work:
CamCorder (Use a 3rd Party)
Anything Else, You'll Let me know.
Whats Been Removed:
Any app that can be downloaded from Market
All Sample JPGs to save room.
What has glitches but works: (Explained Later Below)
Bluetooth
Whats been Added:
TyTung GPS Lib 1.8 (NEW)
My GPS File North America & Europe.
WIFI scan has been increased to 4min scan intervals to save battery.
Suggestions:
NONE

Glitches Explained
Bluetooth Pairing: To get Bluetooth to work, go into Bluetooth, turn on bluetooth, put headset or device into pairing mode. Then Tap Scan for Devices, then tap Discoverable (Making the HD2 discoverable) the device will be found and paired and working. If you disconnect a paired bluetooth or turn off bluetooth, to re-connect, turn bluetooth on, then tap discoverable, then tap the device you want to re-connect to. Its a PITA but it works!
CWR Partition Needed EU: NEW CWR 01.July.2011
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 8M
system ya 216M (Recommended 220)
cache ya 8M (Recommended 16)
userdata ya|asize|hr allsize
CWR Partition Needed TMOUS
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 8M
system ya 400M
cache ya 8M (Recommended 16)
userdata ya|asize|hr allsize
Works for me.
How to prepare your Phone for this rom if you are coming from another rom using the same CWR Layout (If you Flash a new CWR Partition you can skip this step):
In CWR go to Mount & Storage, and Manually format each section:
Format Boot, Cache, Data, System, then go to advanced and then wipe dalvik cache. once you do that, then you can flash the rom. I have made it that it formats boot, data, and system before flashing, but its an extra precaution, especially for EU users.
EXTRA NOTATION:
As I said in the FAQ, you can try different partition sizes, but any problems that occur I can not be responsible for. Do understand that we all have a limit of what we can use on our rom.
So seeing that so many people are having this stuck at gogogo problem, I have attached here the CWR zip for EU & TMOUS. The problem is not the Rom but your BOOT Partition Layout.
Just to be safe here are the instructions, "Just in Case":
Boot into Magdlr, make sure your phone is not connected by USB, then choose USB Flasher when it says waiting USB, plug your phone in, WAIT for it to say Waiting USB...USB, then flash the CWR I provided, these settings will and do work, when the phone reboots, then choose option 8 to go to recovery, and flash the rom, and right after flash the 1.3 update.
As a habit, you should after the flash of the rom go into the advanced option before rebooting, and choose error report, so that a recovery.log of the boot process is saved to your sdcard, and then you should pull this log into your computer. This log shows you the whole flashing process and can save you endless time and headaches of why your phone is not booting.
98% of the time the failure to boot is due to running out of room on the device because of the wrong partition layout. 1% of the time it is due to a wrong boot layout. 1% of the time its due to bad blocks on the phone that cant be writtten to which reduces your partition size.
I cannot guarantee that HD2 toolkit formats the partition layout correctly, or anything other program, this is what I use and it has not failed me yet, if you choose to use a different way of laying out your partition, then please do not blame the rom.
Thank you.

FAQ & Things
FAQ's
Q: Will you be putting out a CLK rom?
A: No, if you want to use clk its rather simple, extract the initrd.gz and zimage from the rom and place it in the fastboot folder. Flash the rom as normal, and then enter fastboot and type this command: fastboot -c "" -b 0x11800000 flash:raw boot zImage initrd.gz
Reboot, and enjoy!
Q: Does the TMOUS use an SD-EXT?
A: No, the whole rom fits on the phone, (yes you read this right), and you still have about 45mb of free space in the system folder.
Q: What about apps? Thats not enough room to put apps in!
A: All apps are scripted to install in the "DATA" folder, since you have nearly 400mb of free space, I think that is more then enough. Not to mention you still do have an SDCard.
Q: What about us EU users?
A: EU users will still have to use an SD-EXT. I didnt want to play with this much, since I dont have an EU HD2, but I am looking to see if I can lessen how much of the EXT is used. (Possibly moving framework and some rom apps into the phone). Still undecided.
Q: Are you planning to update this rom?
A: As of 1.5's release No. Due to the fact that a> All bugs should be squashed, b> There isnt anything new to add, c> and the biggest reason; Both my HD2's are biting the dust and can no longer continue flashing roms.
Q: Can I use a different Partition layout?
A: Sure, but if it doesnt work, then dont blame me.
Q: How stable is this ROM?
A: As stable as its going to get currently, there are too many missing parameters in this rom and until they are sorted out it will still have glitches and hiccups.
Q: I don't know how to flash this rom, can you help?
A: Sure. Read the sticky in this forum and learn the basics.
Q: This Rom is garbage, it doesnt work, and you call yourself a Chef?
A: No, Refer to the Answer above regarding me being a Programming Idiot.
Q: I like this rom do you have plans to do any others in the future?
A: No Comment.
Q: Can I donate to you for all you have already done?
A: Sure if you feel so inclined, its that green button under my thanks meter to the left, but if you dont, the thanks button will do.
Q: Can I download this ROM from my Phone?
A: Only if you are using mobile firefox or opera, the default browser will not work on the phone, it does not handle FTP links.
Q: I have these glitches on the screen, or some people call white noise every so often. How do I get rid of them, or do you have any plans to fix it?
A: Please See this Post: Graphic Glitches or White Noise
Q: I want to have your child!
A: Sorry I have 6 kids, the factory is closed.

All ROM Links & Add-Ons
Links to TMOUS & EU ROMS + Build Updates:
TMOUS & EU ROMS HERE
Mirrors: Thanks to Omnimann!
Links to EU & TMOUS
Add-Ons: (Attached to post removed Apk's)
Twitter
Tip Widget
Trends Widget
Flickr
ProTips
Stock
Voice Dialer
Voice Search
EReader
Wireless Tethering If needed. [20.06.2011]
Wired Tethering if Needed [23.06.2011]
Change Log V1.5 list of fixes/enhancements: RELEASED
Mail Widget 3rd Selection does show Email. (Fixed)
New OOBE Video (Thanks to Capychimp for permission for use) (Release 1.5)
3D Sense ability if wanted (Removed, too much resource used)
Ram Optimization
New market app
New Msg App
New Contact App
cLK compatible
Stock Advanced Power Menu V3 (Thanks to Dansta34!) (Found a Problem, Removed due to re-sizing Bug)
Car Panel REMOVED (Part of locations)
TYTUNG'S AGPS SUPPORT v1.8
World Clock Bug (Fixed V1.5)
Added/Enabled New boot animation screen.
Added/Enabled Bootup Audio
DOWNLOAD THE ROSIE FIX.ZIP TO CORRECT CONTACT WIDGET RE-SIZING FOR 1.5
CHANGELOG:
NEW EU ROM: V1.4.2.
EU Install Instructions: Install Rom 1.4, then Use Update Build Pack to Update to 1.4.2.
Icon Bug Fixed.
Updater for 1.4.2 Fixed. (Thanks to dansta34 for letting my look at his update script to fix mine.
APP to SD Fixed.
NEW TMOUS ROM: V1.4.2 (EU Users Working on finishing.)
TMOUS Install Instructions: Install Rom 1.4, then Use Update Build Pack to Update to 1.4.2.
Fixed Missing ICON issue.
NEW EU & TMOUS ROMS: V1.4.1 (TEMP REMOVED DUE TO ICON BUG)
Included all V1.4 Build Updates fixes into rom.
Fixed MMS Issue for T-Mobile Users, both EU & US (Thanks bigcnlb)
Build Update Pack to V1.4 (New Screenshots Posted on OP)
New Msg Widget
New Album
New Camera (Better Pictures)
New Contacts
New FM Radio
New Streamplayer
New MSG App (Now has Secure Box!)
Stock Notification Pull Down now has Recent Apps Window
Added Google Talk
Lockscreen Now has a BLACK Ring instead of Silver. (Thanx JHR5474 For pointing it out)
Add New Skins:
BlueSky Skin
Burgundy Skin
Build Update Pack to V1.3 (Removed due to Update with 1.4)
Removed Jaglicic Fix (Not needed anymore)
New EGL's added
Music Fixed
Weather Fixed
Weather Wallpaper Fixed
Gallery(HTC Album) Fixed
Maps Added and Fixed
Kingdom V1.2
Added Jaglicic Fix to Build Prop.
Kingdom V1.1 Initial Release
Build Updates:
Build updates are CWR Flashable, unless otherwise stated.
Download Rom 1.2, Flash it, then Right after Flash The Update pack. There will be no 1.3 Full Rom released.
Please use the Thanks Button, and leave the posts for Questions, Comments, Suggestions, and such.
Donators: (Thank you, it is humbly appreciated)
Pronor
Mihaelzeuch
Marcel van Egmond

so thats where you been

wow nice ! where download link ?

ah nice,
will try asap. :=))

been waiting on this...I KNOW IT WILL BE GREAT THANKS!!!!

Looks very nice!
I will test it later.

chapyy said:
wow nice ! where download link ?
Click to expand...
Click to collapse
look at post #4 ;=)

Link is down.

wow nice will try now

moises93 said:
Link is down.
Click to expand...
Click to collapse
downloading at 30 %

dirtytwo said:
downloading at 30 %
Click to expand...
Click to collapse
How do you manage to download ? I get a site where i have to login..........but i don't have a username or/and password.
Mazzie

downloading now
will give it a whirl when i get home loater today
and Thanks

mazzie66 said:
How do you manage to download ? I get a site where i have to login..........but i don't have a username or/and password.
Mazzie
Click to expand...
Click to collapse
Download is slow. Maybe you have to try later. No username or password.

Download slow 3 hours remaining

dirtytwo said:
Download is slow. Maybe you have to try later. No username or password.
Click to expand...
Click to collapse
Thanks, it was my Opera browser that couldn't manage the download ! FF is now doing the job.......slowly hahaha
Mazzie

Remember I am hosting the files on my own server, I have a limit of 5mb upstream, so please be patient.
And make sure to read the FAQ's I have just updated them with a post from Jaglicic If you still have FC's:
You can try this :
Download Android Terminal Emulator from the market and launch it
Type in su then hit enter. (Accept when SU asks if you want to allow root)
Type in echo ro.HOME_APP_ADJ=1 >> /data/local.prop then hit enter.
restart phone.
After a few ours testing I didn't have any Sense FC and no rosie restarts.
I am hoping that this is the way to keep rosie in memory.
God luck...
If it works please confirm here.

@Angeldeath
I dont know why you did implement your gps.conf (even though it was a lot of work for you) as tytung clearly said that his (which he had written by himself which means he knows about his own code) and everyone else's gps lib is not going to fetch any data of the gps.conf
so why even putting it in there? (or was it just because it can't hurt to put it in there?)

[24 Aug 2011][cLK/MAG] Stock Desire HD HotMod v0.5 [Android 2.2.1/Sense 2.0][Raf 1.9]

Stock Desire HD HotMod v0.5
- based on CMYLXGOs great work -​
[RUU: Ace 1.84] [Android 2.2.1/Sense 2.0]​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With permission of CMYLXGO, I ported his fantastic ROM to cLK and updated/modded it in some aspects (see changelog). I plan to maintain this ROM and keep up with development in the future. It is based on CMYLXGOs Stock Desire HD v1.1.18n. Everything should be working. For a full description, see the original thread
Click to expand...
Click to collapse
Key Features:
Stable
Fast
Data working (cedesmith's ppp wrapper 0.8b4 for maximum stability)
aGPS (libs v2.0 + gpsconf, thanks to tytung - change server to your region before flashing)
No graphic glitches
Camera + Camcorder fully working (No 720p recording...)
FM Radio
Offmode charging
720p playback (using thrid-party app)
Adobe Flash working flawlessly (Install from Market)
Installation:
If you are a pro and already have cLK and CWM installed, you know the drill (partition 300-5 since v0.5). If you are new to Android flashing on the HD2, I recommend stirkac's excellent tutorial. All necessary files can be found in HotMod utilities.
1. Download ROM and copy zip file to your SD Card.
2. Download HotMod utilities v0.2. Extract the zip file.
Flash cLK
1. Enter SPL by holding VOL DOWN while switching on the phone
2. Flash with CustomRUU.exe from HotMod utilities.
Install CWM Recovery
1a. Power up your phone while holding BACK key
1b. Plug in USB cable. Driver is located in folder HotMod utilities/google-usb_driver, if necessary.
2. On command prompt, switch to HotMod utilites folder and type:
fastboot flash recovery recovery_leo4014.img
3. Reboot (type fastboot reboot or manually)
Install ROM
4. While powering on, hold HOME key
5. Select "install zip from sdcard"
6. Select HotMod_vX.X.zip
7. Confirm, relax, reboot, enjoy
MAGLDR:
To use MAGLDR, download HotMod_MAGLDR__utilities_[partition_+_cwm_4.0.1.4]_v0.2 and HotMod_MAGLDR_patch_v0.1. Copy rom and patch to sd card.
Install MAGLDR 1.13.
Install CWM 4.0.1.4 and partition layout using DAF.exe from zip.
Install rom via CWM, don't reboot yet.
Install patch via CWM. Reboot.
Click to expand...
Click to collapse
EU Users: Memory on NAND is low. Prepare your sd card by creating 1 gig ext3/4 partition. Install Apps2SD for HotMod via CWM. Transfer dalvik to sd.
Known issues:
robotic voice on first call. Solutions: a) Disable "Audible touch tones" from Settings / Audio. b) Enable + disable speaker during robotic call. c) Hang up. b + c will work until reboot.
Low incall volume: if incall volume is too low for you, delete /system/etc/firmware/htcleo.acdb. This will make you suffer from high mic gain...
You tell me...
Click to expand...
Click to collapse
Credits:
- CMYLXGO for creating his wonderful ROM
- cotulla and his team for making Android on HD2 possible
- cedesmith for cLK
- rafpigna for Kernel
- tytung for aGPS
- arif-ali for partition layouts and recovery
- averyk for reports & testing MAGLDR patch
- the whole HD2 scene for making this the coolest phone ever!
Click to expand...
Click to collapse

Changelog
Code:
v0.5
- Cleaned up Ringtones to fit 300 mb partition [URL="http://www.fileserve.com/file/fcg73cA"][Use new partition layout v0.2][/URL]
v0.4
-Fixed green camera tint + camcorder lag
v0.3
- Reverted to Raf 1.9 to fix Bluetooth
- Updated Notes Widget to v2.00 from HTC Hub
- Removed Flashlightplugin remnant
- Removed Youtube (Download from Market)
- Removed File Manager (Download from Market)
- Removed unnecessary Apps2sd files from base build
v0.2
- Updated Kernel to Rafpigna 2.0
v0.1 Initial release
- Built for cLK
- Added tytung's libgps v2.0 RPC + gps.conf (intervall set to 48 hours, region set to Germany. I recommend changing it to your location in /system/etc/gps.conf, set NTP_SERVER=XXXX.pool.ntp.org )
- Included letama's htcleo.acdb to fix high microphone gain. Now you may use your HD2 as a phone again :)
- Reverted to stock browser.apk to fix bookmarks [thx carl]
- Removed Flash + FlashLight, install recent version from market if necessary. Works perfectly for me.
- Removed Adobe Reader
- Removed Google Apps
- Removed Solitaire + Sudoku
- Removed Facebook
- Removed Soundhound Freemium
- Removed TMoUS stuff. Will provide apks by request.
- Removed unnecessary HTC stuff to save precious space
- Stuff I forgot.....
Download history:
HotMod v0.5
HotMod v0.4
HotMod v0.3
HotMod v0.2
HotMod v0.1

Oh great, a Froyo Sense at last !
I think you will encounter a huge success until 3.0 is stable...especially if you provide a patch to revert to the stock theme/framework...

Froyo+ Sense 2.1 ? Are you sure? It will be great but you must write it one more time
Sent from my HTC HD2 using XDA App

Ouch, you're right, my bad. Still might be an interesting project to pursue
Rom will be up in 10 minutes.
Edit: Files are up. I hope that everything is working as it is for me. Please report bugs or feature requests. Good night...

Hello,
this ROM sounds very good but are there any screenshoots? What is not like the Original?
Is this Version also for the EU-Version and what Partition Layout?
Is it also Multilanguage (German)?
Most important question: Is it only for cLK or also für MAGLDR with CWM?
Best Regards
Dennisth10

Everything is stock, thats why I made no screenshots. Maybe I should include some tomorrow. I removed some HTC widgets that I never use, but the important stuff is there. If something is deeply missed, I will add it again.
It should work for the EU model, but I couldn't test as I only posses the TMoUS model.
It is Multilanguage, and especially German is working just fine gps.conf is already set to Germany, so enjoy!

Hannes_HD2 said:
Everything is stock, thats why I made no screenshots. Maybe I should include some tomorrow. I removed some HTC widgets that I never use, but the important stuff is there. If something is deeply missed, I will add it again.
It should work for the EU model, but I couldn't test as I only posses the TMoUS model.
It is Multilanguage, and especially German is working just fine gps.conf is already set to Germany, so enjoy!
Click to expand...
Click to collapse
Ah that sounds good.
But:
Can I install it on MAGDLR with CWM?

Hannes_HD2 said:
Ouch, you're right, my bad. Still might be an interesting project to pursue
Rom will be up in 10 minutes.
Edit: Files are up. I hope that everything is work as it is for me. Please report bugs or feature requests. Good night...
Click to expand...
Click to collapse
No problem bro, maybe it's even better, "all" who workrd on Sense rom goes to Ginger with a 2.1 but with all due respect for their hard work i can't stand on it more than two, three days. Glitches, camcorder, power menu and the rest smaller bugs it's still, even after big progress, too much for me. After many many task29 I would like to have fully working, daily using and whatevering rom, sense rom, for more than three days:-D and
I'm not Bond, James Bond
PS: But that doesen't mean that I will not try a new Pyramid 1.8 from Dung also:-D
Sent from my HTC HD2 using XDA App

You exactly described the purpose of this rom. This is meant to be the fully working daily driver. Camera and camcorder are working perfectly and there are no graphic glitches. Hope you like it. If there are any bugs, let me know.
Sent from my HTC HD2 using XDA App

Dennisth10 said:
Ah that sounds good.
But:
Can I install it on MAGDLR with CWM?
Click to expand...
Click to collapse
No, not at the moment. You could try, probably it will boot, but there won't be RMNET, the only feature that you are missing with cLK. I could deliver that, but I think you should try the original (see first post).
Sent from my HTC HD2 using XDA App

hmmm
what partition layer should i use? 150-5?

andreyxxl said:
what partition layer should i use? 150-5?
Click to expand...
Click to collapse
320-5, as included in utilities package. Sense is huge.
Sent from my HTC HD2 using XDA App

The ROM link is down.

Sklar said:
The ROM link is down.
Click to expand...
Click to collapse
It's working for me. Anyone else?
Sent from my HTC HD2 using XDA App

finally i get new updated DHD rom,its really great
i just want to know does it support App+ ??!! and if not can u upload patch for this ( just for Eu user )
and thank u for ur big effort
can i update kernel to raf 2oc?

Has anyone used this on EU hd2?
Sent from my HTC HD2 using XDA Premium App

EU users should use APP2SD following this tutorial by carl1961. Please report back.
Will test Raf 2.0. If everything is smooth, there will be an update.

Hannes_HD2 said:
EU users should use APP2SD following this tutorial by carl1961. Please report back.
Will test Raf 2.0. If everything is smooth, there will be an update.
Click to expand...
Click to collapse
Right okay so if installed without a2sd on EU hd2 we would have next to no space
Sent from my HTC HD2 using XDA Premium App

[24 Apr 2012] [CWM] [Sense3.5] Sendroid Beta .46 Update! [Marc1706 0.2.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#1 - Overview / Known Issues / Download Links / Requirement / Credits (now here)
#2 - Changed Logs / Next Plan / FAQ
#3 - Install Tutorials / Screenshot / User Banner
#4 - Debug Info Demo / Useful Tools / Recommendation
Click to expand...
Click to collapse
Big Thank for DFT Team, for Cotulla, for all of kernel builder, for Daekin and his Great Sense of Eclipse, no them no me. for the helps and discuss from dorimanx,zeppelinroxfor,Cheech1976. for everyone who devoted for Android on HD2 and for who created those tools for cooking Android system, and someone who supported all of devs and chefs, all thanks for yours.
For yes/no menu and many things, thanks for Dorimanx and his helps.
For ODEX, thanks for Xylograph and his helps.
For AUTO cLK Detect, thanks for E334.
For debugs, thanks for Rasumia;GraveDigger176;xanthrax.
For the Mirror file server, thanks to Michaelkamen
For the Update me APP, thanks to acquariusoft
For the AROMA installation wizard, thanks to amarullz
Click to expand...
Click to collapse
Sendroid are sharing with Italy people by Sgnuffitech.it and Willy89 now!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
An Android 2.3.5 and Sense 3.5, Based on HTC Sensation XL (Runnymede) RUU 1.27.1400.4 from fooball
Support 2 Versions, A2SD / Nand-Only
Support 2 Modes, Fully and Lite(Clean) installation. *below
Multilanguage / Ad-free / RTL languages support / Proper AGPS support
Zipaligned
Deodexed for NAND-Only, Odexed for A2SD
Optimized for performance!
Auto language detecting.
Ti Backup / Dev Tools / Spare Parts / Leo AGPS injector / Newest Google Play(Market).. etc
Overview:
Add:
A hacked Sense 3.5 Roise.apk(Sense Launcher), disabled the 3d display.
Sendroid customized boot animation and off the animation when power-off.
Support:
Fully HW rendering UI.
CRT Unlock/Lock screen animation. *thanks to dungphp
Auto cLK/MAGLDR detecting, thanks for e334! he made it!
Sony 2 type posted process engines. *thanks to mwakious and seaman2k.
Android 4.0 ICS Font suit: "ROBOT" already inside.
A REALLY /cache partition! now all of market and apps cache folder will be in the ram, it will be created when linking automatic!
P.D.P, Phone Daemon Processes. *below
a system control app called "Screwdriver". *below
Modify:
Keep Weather but modify animation and sound let animation became a stopped picture so reduce resource usage.
OC when booting to reduced boot time.
com.htc.resources.apk and framework-res.apk, to reduce resource usage.
a lot of stuff about system, for more and more performance!
Enable:
Enable ZRAM, in all version and all modes. *Zram thanks for DM and Marc and all of kernel maker.
Enable Scheduled Tasks, for clean caches/memory/etc.
Removed:
Removed some HTC services and widgets
Disabled SWAP, for now we don't need it anymore.
Version Description:
NAND:
Mounted RAM as dalvik cache folder, so we can use all of data spaces and get a faster system.
A2SD:
Database to ext mod, created by me.
ODEX framework and system apps and user apps in A2SD version!
A2SD get level 0 compression for all system app! to speed up respond! when first time boot it will decompress by atuo so no any compression now!
Modes Description:
Fully installation:
Included all of system and user apps i suggested for daily use.(for guys like you and me, i guess.;p)
Lite(Clean) installation:
Only include some apps that are needed to use, so you can maximum custom your phone without remove any apps.(for Advanced users.)
Click to expand...
Click to collapse
Phone Daemon Processes:
These Processes control kernel and whole sysem via set sysctl and release cache when phone switch between Sleeping and Awake - so phone never getting slower.
Screwdriver:
It is an app that can control my part of function from rom. *coming soon till 2012-Apr-16.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Camcorder : only normal at 320x240 resolution(30 FPS), others will get half or more less FPS, and can't use the vertical way to recording videos.
HTC Sense Previews : can't shows preview screen, it's a common issue of EGL libs.
Click to expand...
Click to collapse
[Click me go to Main download page] ------------------------- [Click me to find FAQs]
[Click me go to Mirror download page]
If you like my work, please considering to do:
Donate to me or Daekin.;p
Use the Sendroid's User Banner at your signature. (just like me!)
Click to expand...
Click to collapse
Click to expand...
Click to collapse

#2 - Changed Logs / Next Plan / FAQ / Debug / Install Tutorials
Click me to look FAQs *important
Get a problem and solution for it? pls tell me and i will add in my FAQ!
Click to expand...
Click to collapse
Aroma installation wizard
Update me app
Wrench app
Click to expand...
Click to collapse
2012-Apr-24--Sendroid_Update_v1.04.46-F2FB6493
changed:
re-build part of shell scripts and move /cache partition from memory to nand to solve "when market auto restore apps, it will get stuck" issue.
move P.D.P data from /cache to /tmp
make debug part independent, now it's a part of xbin.
also make toolbox and init.d part more lite.
[*]2012-Apr-21--Sendroid_Update_v1.04.45.1_TEST_For_TMOUS-4E89B6A1
changed:
now i provided a update for TMOUS users in Major server. this update must be flash after you finished full package and without reboot. if i don't get any wrong, your second boot won't get any crash msg anymore.
[*]2012-Apr-19--Sendroid_Nightly_v1.04.45-B2A9E48F
[*]--------------Sendroid_Update_v1.04.45-4E89B6A1
changed:
Fix the cLK boot issue.(if still can't pls tell me asap, i'm using 1.4.0.1 running well)
Fix some bad code in installer-script for CWM.(also fix the issue of Fully/Lite were install the same things.)
Improve the in-call volume, from 800 to 900. (need test more)
Fix some bugs from the PDP, like the default cpu freq should be 1.3Ghz, but in .44 you will get 1.536ghz.
Update user apps to newest.
I forgot.
Issue: miss location still needed to be fix.
Issue: when plugging the 3.5 audio line, may crash the DSP manger(need test and seems not a big deal? not sure.)
[*]--Sendroid_Update_v1.04.43, CRC:E1FBAF95
*for all
improve the compatible of the network connection.
fixed the zram mod, i set it off and forgot to turn it on in .42 .
issue: miss location still needed to be fix.
issue: support of CLK needed to be fix.
Old changed logs
Click to expand...
Click to collapse

#3 - Install Tutorials / Screenshot / User Banner
*MAGLDR or cLK auto detect thanks for E334
*CWM Menu thanks for dorimanx.
Step by Step with Texts:
Download Package and check the CRC32 code.
If the code coincided, be sure you already install the MAGLDR or cLK.
The install script will detect the cLK or MAGLDR by auto.
No MAGLDR or cLK? click me to linking to HD2 Toolkit to know and install.
Install the package that you downloaded via CWM.
Select from menu to get what is you wanted.
Menu 1 : What kind of installation do you want?
NAND-Only for EU HD2 or A2SD for EU HD2? If you have a TMOUS HD2, you needed to select A2SD.
Menu 1-2 : What modules do you have? EU or T-Mobile HD2?
This step will decide where should be installed, /sd-ext or /data. so if you're the user who have T-Mobile HD2, don't get the wrong selected here.
Menu 2 : What mode do you wanted?
Here will decide what kind of mode you want to use, Fully or Lite(Clean)? the different is Lite only install some app that have to be install(like phone.apk).
Waiting to finished.
Step by Step with Video:
If you did the partitioning, in most case don't need wipe but it's depending on you. you can do it, for the reason with ensure.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
More will come...
Click to expand...
Click to collapse

#4 - Debug Info Demo / Useful Tools / Recommendation
I provided a tool to test I/O system , I believe this can help me ... all of ROM builder and devs to proof his or her tweaks really working prefect. so if you have free time, please look this one and give it a try!
Today download it, Tonight use it!
[DEV][SCRIPT][I/O][v0.6] I/O Schedulers and devices Tester
Click to expand...
Click to collapse
Click to expand...
Click to collapse
My ROM is based on Daekin's Sense of Eclipse, and his version provided a Complete Android 2.3.3 and Sense 2.1+3.0 User Experience.
#---->> Wanna try a Complete Sense? Click me to link to Sense of Eclipse 2.5.0.0 right now! <----#​
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Sounds impressive, I've been waitingfor someone properly reduce Sense to more ram, I'm downloading now
Sent from my HD2 using xda premium

Just to clear, I want to install apps2sd version do I need to just download one zip?
Damn I can't download the zip file through my phone and Ubuntu won't connect to wifi,
Sent from my HD2 using xda premium

mexicandroid said:
Just to clear, I want to install apps2sd version do I need to just download one zip?
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
hi it's need base and an app package :
nand=base+napp
a2sd=base+a2sd package

Nice rom and thread! Love the pictures and instructions ^^

Now sir, YOU made me want to flash this!
Just 1 question, I see you use htc sense 3.0, but I f*cking HATE the 3D animation in sense(when you swipe trough screens) is this removed? (please say yes <3)
And another thing, will we be able to use all of the sense skins that have been released?
I'm going to try this right away!
Good luck & Good job !!

so we are flashing base.zip the flashing over it with either nand only.zip or a2sd.zip depending on preferences
also rom states dont need ext the says under required that you do ?
[11 Dec 2011] [CWM] Sense of Lunar 1.0 [DORIMANX Kernel 2.1] [don't need EXT!]
*HD2 Required :
Radio 2.15.50.14
HSPL 2.08
MAGLDR 1.13 / cLK 1.4.0.1
ClockworkMod Recovery 3 or the newest one
1024 MB EXT4 partition on SD card for App2SD versions

manemzjum said:
so we are flashing base.zip the flashing over it with either nand only.zip or a2sd.zip depending on preferences
also rom states dont need ext the says under required that you do ?
[11 Dec 2011] [CWM] Sense of Lunar 1.0 [DORIMANX Kernel 2.1] [don't need EXT!]
*HD2 Required :
Radio 2.15.50.14
HSPL 2.08
MAGLDR 1.13 / cLK 1.4.0.1
ClockworkMod Recovery 3 or the newest one
1024 MB EXT4 partition on SD card for App2SD versions
Click to expand...
Click to collapse
First you flash the base, build 0706, then you flash update 2 for the base. After you've done that you flash either the NAND package or the A2SD package. If you use the NAND package, you DON'T need the sd-ext partition, if you flash the A2SD package you DO!
Hope I cleared it up a bit

yz.hd said:
Nice rom and thread! Love the pictures and instructions ^^
Click to expand...
Click to collapse
Thanks! I also like your comments!
ybinnenweg said:
Now sir, YOU made me want to flash this!
Just 1 question, I see you use htc sense 3.0, but I f*cking HATE the 3D animation in sense(when you swipe trough screens) is this removed? (please say yes <3)
And another thing, will we be able to use all of the sense skins that have been released?
I'm going to try this right away!
Good luck & Good job !!
Click to expand...
Click to collapse
good question, for now this Sense launcher --- Rosie.apk , I already modified anima part but can't and don't sure how to remove that anim you said. so I think it'll provided more speed then the original one.
and also I'll provide the Sense 2.1 one in op soon, if you still don't like you can take it
manemzjum said:
so we are flashing base.zip the flashing over it with either nand only.zip or a2sd.zip depending on preferences
also rom states dont need ext the says under required that you do ?
[11 Dec 2011] [CWM] Sense of Lunar 1.0 [DORIMANX Kernel 2.1] [don't need EXT!]
*HD2 Required :
Radio 2.15.50.14
HSPL 2.08
MAGLDR 1.13 / cLK 1.4.0.1
ClockworkMod Recovery 3 or the newest one
1024 MB EXT4 partition on SD card for App2SD versions
Click to expand...
Click to collapse
yep you're right but this Required is for a2sd version ... I'll edit the op title to eliminate this misunderstanding.

ybinnenweg said:
First you flash the base, build 0706, then you flash update 2 for the base. After you've done that you flash either the NAND package or the A2SD package. If you use the NAND package, you DON'T need the sd-ext partition, if you flash the A2SD package you DO!
Hope I cleared it up a bit
Click to expand...
Click to collapse
YES! this is what I mean, thank you friend

Wow looks great I now burn it on my cell phone!
But still did not understand some things which versions this Android? And a Sense?

nadavgal said:
Wow looks great I now burn it on my cell phone!
But still did not understand some things which versions this Android? And a Sense?
Click to expand...
Click to collapse
sorry about this, I'll add it after reply. now is android 2.3.3 and sense 2.1, a part of 3.0 were added.

Nice ROM - very fast!
But it crash when I try to setup Exchange account - enter all data and after final submit it craches
Update: Wheater, browser bookmarks crash too

ksokol said:
Nice ROM - very fast!
But it crash when I try to setup Exchange account - enter all data and after final submit it craches
Click to expand...
Click to collapse
okay i'll check it ... can you use es folder manager or root explorer? I think the reason probably is I replace the sense 3's mail.apk ...
ok, if you do then try to replace those files for your mail.apk:
1. mail.7z is the original one in sense 2.1
2. mail-o.7z, if the first one can get into exchange mailbox, then pls try this one. it's the optimal one for file size and speed. optimal probably cause no-go so need test before put in next release.
*mail-o.7z working! thanks ksokol

the bookmark i found the reason, i removed the common_icon_bookmark_rest.png on resource. I'll add it back to fix this issue.

Mail-o.7z - works!

ksokol said:
Mail-o.7z - works!
Click to expand...
Click to collapse
wow thanks. the browser issue maybe need wait and fix in next ver. I'm testing the new stuff but it's still unstable.

roeddie v0.9.6 Vodafone Smart II Alcatel v860

Vodafone Smart II aka Alcatel v860
with Latest Update2 INTEGRATED
based on stock vodafone it​
1. How to make flash.
First unpack "alcatel-onetouch.7z" to ROOT of your MicroSD Card.
"must be in root eXactly like this "f:\alcatel-onetouch\backup\" (where f:\ is your letter of the MicroSD Card)
so for that just unzip, unrar the files "alcatel-onetouch.7z" to your MicroSD Card letter mine is f:\
2. Insert in your Vodafone Smart II aka Alcatel v860 smarthphone and be sure that you have the phones battery charged at 100% before continue.
3. make backup of your stock rom first just in case something is wrong
start up phone with VOLUME UP + POWER as soon as is vibrate just let go of POWER key and don't let go of VOLUME UP till TCT ALCATEL Recovery v1.0.0.0 appears
to navigate use VOLUME UP + VOLUME DOWN
to enter in subdirectory or to enter use HOME (HOUSE)
to go back from subdirectory use GO BACK ARROW
4. To make BACKUP of existing ROM go to
- backup and restore - backup
5. To RESTORE do
- wipe userdata/factory reset (confirm with YES -- delete all user data)
- wipe cache partition (confirm with YES -- Wipe Cache)
- advanced - Wipe Dalvik Cache (confirm with YES -- Wipe Dalvik Cache)
- backup and restore - Restore (select "apps")
Wait to complete restore operation and
- reboot system now
roeddie custom rom edition v0.9.6
Changelog: 10-September-2012​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
===============================================
Italiano
Espanol Francais
Deutsch​English (United States)
English (United Kingdom)
​===============================================​
With Applications version
Requires: microSD memory card inserted in the phone with a TOTAL of 1GB free space
0. Integrated the Latest OTA Update2 from Vodafone
(NO locked boot and no Missing Recovery, all are Here Functional)
1. Has Backup and Restore, Install Zip from sdcard
(all here nothing is lost You still have Recovery Menu in Power + VolumeUp)
2. Install now apps directly to sdcard
(thanks to Vodafone OTA Update2 for that)
3. Totally UNBRANDED from Vodafone Crap
4. ROOT access with Superuser
5. Link2SD for advanced USERS
6. 70 MB free space of internal memory
7. has best tweaked settings for CAMERA
(Video, Photo & Sound Quality, as much as this phone Hardware can offer)
Ex: vodafone: eddie:
video: encoding: 15 fps 25 fps (no more pauses, fluid recordings)
codec: m4v AVC H264 (Activated,better quality, on vodafone was Erased)
bitrate: 360000 1500000 (up to 1.5 mb/s of 640x480)
audio: codec: amrnb AAC (better quality)
bitrate: 12200128000 (128kbs)
samplerate: 8000 16000 (16KHz)
fotos: quality: 90% 100%
8. Added Volume Sound Boost by 20%
(now you can hear better and louder in the limit of the speaker)
9. IMPROVED speed up and performance with new settings
(Ex: speeded up wi-fi up/downs, speeded system rendering with gpu assisted acceleration,
faster scrolling, added rendering quality, decrese dialing delay...... )​
10. Total Commander with ROOT support (the best file manager ever)
11. BATTERY BOOSTER to balance and maximixe battery without loss in performance
12. Launcher replaced with tweaked more powerfull and less memory eater LaucherPro 13. Fixed WiFi, Bluetooth and 3G, no more errors when turning off, on
14. Fixed ALL APPLICATIONS INSTALLED IN THIS RELEASE !
(meaning that GooglePlay, Google+, Google Talk, Search, YouTube
and the rest of them are Indeed Working)
(tested All Applications till the green blood of Android, no more errors)
15. Customization and many, many, many others tweaks and hacks.....
(it's a looooong list)
16. Build in with Apps and Games.
Quick Info Update:
added: customizations (theme, icons......)
init.d tweaks (for advanced startup scripts and settings)
*now everyone can mod with personal scripts system/etc/init.d/*
*init.d will be used also after the boot will be unlocked*
updates: (updated Google Play Store to v3.8.16, Maps 6.11.1, Google+ 3.1.1.32879387
Facebook 1.9.9, Google Translate 2.5, Skype 2.9.0.315, Twitter 3.3.1
Yahoo! Messenger 1.8.1, Yahoo! Mail 1.4.5, QR Code 5.2.2 and others......)
added: Tapatalk 2.2.8 and others ......
PART 1: MD5: 98388102682ebd5849cbdab4e7b16808
www.mediafire.com/?j49zt6mvz6mbw9q
PART 2: MD5: 95e015d050536230524321e120f61564
www.mediafire.com/?3s3vsxhs5v8v85n
Custom Themes Packs
by roeddie​
How To Install:
0. Copy the zip file to ROOT of miscroSD card
"ex: f:\blue.pack.zip"​​1. Install from Recovery
with Install zip from SDcard.
2. Reboot and Enjoy......
only for this pack of languages
not tested on other languages
compatible with v0.9.6 and v0.9.1
by roeddie​===============================================
Italiano
EspanolFrancais
Deutsch​English (United States)
English (United Kingdom)
===============================================​
Default Themes Based From
v0.9.6
return to Default theme
Size: 4.77 mb
MD5: 14fc4fe6b527f8d7d7f82a4185e69807
Download: www.mediafire.com/?mdx6inop8kiyins
Ladies Edition v0.1​
​​​
​
Size: 10.80 mb
MD5: 548fd17d0f38271f46bb3d64257b18ff
Download: www.mediafire.com/?8b54cwfb2a8b1pb​
​
Green v0.1
Size: 9.1 mb
MD5: 358114cfea69b32eb7d47d99443b7cef
Download: www.mediafire.com/?qt5od0teb9taf61​
High Tech v0.1
Size: 8.2 mb
MD5: 541cd895b4fa85c5f721a7ead50abcf2
Download: www.mediafire.com/?88zx5i29ez8r9nn
​
======================================================================
These compilations are made by EDi and as usual it says
NO, NO, NO, NO ,NO ,NO,
NO Viruses, NO Mallware, NO Trojans, NO Rootkits, NO Spyware
or any other **** invented by sick mind(s) are NOT here.
This compilation is intended to HELP and Support The Real User, Novice, Advanced and PRO.......
And not to be harm by unknown.
tWEAKS + Speed + Settings + Compatibility + Stability + Compiled (by EDDIE)
====================================================================== ​
​​

Soft Buttons dont work now
I there i flashed roeddie with apps on my Irish Vodafone Smart 2 - everything working touchscreen etc and volume sswitch - however my soft buttons at bottom of screen Home/menu/back/search do nothing now when pressed. Can you tell me what img file controls these buttons is it : Boot.img or Bootloader.img or cache.img or custpack.img or data.img or modem.img or recovery.img or system.img thanks - obviously there must be something different between the Italian smart 2 and the Irish smart 2 phones / ROM

andy_from_ireland said:
I there i flashed roeddie with apps on my Irish Vodafone Smart 2 - everything working touchscreen etc and volume sswitch - however my soft buttons at bottom of screen Home/menu/back/search do nothing now when pressed. Can you tell me what img file controls these buttons is it : Boot.img or Bootloader.img or cache.img or custpack.img or data.img or modem.img or recovery.img or system.img thanks - obviously there must be something different between the Italian smart 2 and the Irish smart 2 phones / ROM
Click to expand...
Click to collapse
hi, I have a same problem. Flash back stock Italian rom not solve the problem. I think the original 01015 rom could solve it, but i can't find. Maybe the original recovery (with four options) will be enough too, but i can't flash it back. Send OK write OK, but nothing changes.

Here is the solution:
Flash this rom, with this commands and after reboot wait a few secunds then say: wolo-looo and evrything will work well:
fastboot-windows.exe flash bootloader bootloader.img
fastboot-windows.exe flash boot boot.img
fastboot-windows.exe flash system system.img
fastboot-windows.exe flash recovery recovery.img
fastboot-windows.exe flash custpack custpack.img
fastboot-windows.exe flash userdata data.img
fastboot-windows.exe reboot
UK http://www.mediafire.com/?9xqfq9ww7031xgx

i have that downloaded and on the sd card, i boot into the screen for the "TCT ALCATEL Recovery v1.0.0.0" and i can use the volcume buttons to change up and down the screen, but as i have flashed with a different rom the soft buttons down the bottom dont work so i cant flash this rom... any help on this is greatly appriciated

My low line keyboard is not working after upgrade...
Hello,
What I can do now to fix it? Pls help me...
Luc

add language
add czech language pls : D + CyanogenMod would be best : D

thnx, i will try after my warranty has expired. Also (am a noob whith adnroid roots) can my phone after rooting work whith others sim card exept vodafone?!

No Elis wont work whith other sim's (Duhet zbllokuar te kto qyqanet) :beer:
Sent from my U8160

????
port cyanogenmod of samsung galaxy ace s5530i? It has the same chipset + pixel resolution : Zmatený: : Smích:

Hi there, my old u8110 got pwned, and touch is dead now, so I got now this nice smartphone, Alcatel v860 (Vodafone Smart II)
I was going to flash this ROM, but not sure since I see some negative feedback about soft buttons.
Can anyone tell me something more about this ROM please? Is just to know if it is a nice idea to test it or not.
Some guy some posts above gave a solution, does it work?
And if I get the time I could start working on CyanogenMod since there are not active projects of it for this smartphone
EDIT: I've flashed the recovery, and it's going great at the moment, even the home button is working now.
Now I'm flashing the ROM, let's see how it goes, hope good, thanks for this Eddie, hope to see you soon back at XDA

Everything works, everything DD

MantisEngine said:
Everything works, everything DD
Click to expand...
Click to collapse
Cool! So you didn't get any problem with soft keys?
Did you already have the recovery?
I've got the stock rom with the stock alcatel recovery (I didn't update the firmware), so I don't need to get into fastboot to install, I just have to wipe and to restore roeddie's rom.. Is it right?
Ty

BenLz said:
Cool! So you didn't get any problem with soft keys?
Did you already have the recovery?
I've got the stock rom with the stock alcatel recovery (I didn't update the firmware), so I don't need to get into fastboot to install, I just have to wipe and to restore roeddie's rom.. Is it right?
Ty
Click to expand...
Click to collapse
Yeah, I've flashed first the recovery.
But the easiest way is to use fastboot and the tool given by roeddie here
Just enter into fastboot mode and use ROM v0.9.6 + Recovery/Backup/Restore to flash ROM/Recovery.
It's pretty easy, if u need any more help, just ask me

Well, I flashed the ROM through recovery yesterday.
Everything works, except for GPS fix... It just... doesn't fix the location! I tried the apps fasterfix, gpsfix, gps status, but these didn't solve the problem! With the stock rom I had a pretty fast fix.
Does your GPS work well? If yes, could you let me see your gps.conf content? Here's mine:
Code:
NTP_SERVER=it.pool.ntp.org
XTRA_SERVER_1=h t t p://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=h t t p://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=h t t p://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.google.com
SUPL_PORT=7276
I had to insert these spaces between h t t p because I still can't post outside links in this forum
Have you got some idea?
Thank you very much
PS: I live in Italy

BenLz said:
Well, I flashed the ROM through recovery yesterday.
Everything works, except for GPS fix... It just... doesn't fix the location! I tried the apps fasterfix, gpsfix, gps status, but these didn't solve the problem! With the stock rom I had a pretty fast fix.
Does your GPS work well? If yes, could you let me see your gps.conf content? Here's mine:
Code:
NTP_SERVER=it.pool.ntp.org
XTRA_SERVER_1=h t t p://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=h t t p://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=h t t p://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.google.com
SUPL_PORT=7276
I had to insert these spaces between h t t p because I still can't post outside links in this forum
Have you got some idea?
Thank you very much
PS: I live in Italy
Click to expand...
Click to collapse
With the GPS Fix do u mean the precision of the GPS on Maps? Because I get the same at stock and custom. It's accurate within 60 meters.

I mean the time that the gps takes to find my position, not the accuracy. It doesn't find it.... It just keep on searching forever, so I can't use any navigation app. That's why I asked you to post the content of your gps.conf, I think there's something wrong with mine.

Same Problems with gps-fix and activating bluetooth (roeddie_0.9.6)
[email protected] i use the same rom-image (0.96). when data-service and wlan is on, i m not able to activate bluetooth-service. the cell-phone tryś to do it, but it failed. only if i restart the phone, bt would be activated.
is there any fix for it?
best regards
kowalskie

kowalskie said:
[email protected] i use the same rom-image (0.96). when data-service and wlan is on, i m not able to activate bluetooth-service. the cell-phone tryś to do it, but it failed. only if i restart the phone, bt would be activated.
is there any fix for it?
best regards
kowalskie
Click to expand...
Click to collapse
Try using bluetooth whether WiFi or service data, both may cause a conflict with the bluetooth.
It may be a bug that u can solve by wiping with recovery.
If not, tell me what are u using BT for and I may give u a solution.
---------- Post added at 03:49 PM ---------- Previous post was at 03:48 PM ----------
BenLz said:
I mean the time that the gps takes to find my position, not the accuracy. It doesn't find it.... It just keep on searching forever, so I can't use any navigation app. That's why I asked you to post the content of your gps.conf, I think there's something wrong with mine.
Click to expand...
Click to collapse
Hmmm, for me it is working, try wiping all data and dalvik-cache thru recovery.
Anyway I will post to you my GPS config.
NTP_SERVER=europe.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.vodafone.com
SUPL_PORT=7275

MantisEngine said:
Try using bluetooth whether WiFi or service data, both may cause a conflict with the bluetooth.
It may be a bug that u can solve by wiping with recovery.
If not, tell me what are u using BT for and I may give u a solution.
---------- Post added at 03:49 PM ---------- Previous post was at 03:48 PM ----------
Hmmm, for me it is working, try wiping all data and dalvik-cache thru recovery.
Anyway I will post to you my GPS config.
NTP_SERVER=europe.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST=supl.vodafone.com
SUPL_PORT=7275
Click to expand...
Click to collapse
[email protected] I use bluetooth to connect to my motorola headset, my bt-freespeaker in my tomtom-navi und to send and receive data with my laptop or another cellphone. I think, i need a fix to correct the bt-mistake.
Cheers
kowalskie