Develop Bugs

[Q] I can't flash anymore roms :(

Guys I tried to flash CM 7.1 stable on my girlfriend's defy and on the first try it didn't install correctly the google apps so I had to reflash them again.
Since that moment I couldn't be able to access the rom anymore, it was stuck in boot loop.
So I flashed some sbf's but I was'nt satisfied with any of them so everytime I try to repeat the whole procedure (root, recovery, flash) the CM 7.1 rom that I flash doesn't start, it stops on the CM boot logo.
Today I tried again installing CM starting from a Froyo sbf, but again no success, this time it's stuck on the original motorola logo, not even the CM one.
What can I do? it seems like I'm not able to properly flash a rom anymore, only sbf's work. Thanks!

have you wipe data from recovery before apply cm7....?

check if you have wiped data before flashing cm plus which version of 2ndinit did you install ???

tegezan said:
have you wipe data from recovery before apply cm7....?
Click to expand...
Click to collapse
Yes, I wiped data, cache and dalvik before applying cm7.
flunk03 said:
check if you have wiped data before flashing cm plus which version of 2ndinit did you install ???
Click to expand...
Click to collapse
I wiped data. I installed 2ndinit 1.9

One more wipe
You should also do a full wipe (data/cache/dalvik/Battery Stats) AFTER applying all the zips.

wipe everything and try
wipe both data/cache and then try
if its for your girlfriend's phone then try cmiui its awesome man.
im sure you will be appreciated for this from your girlfriend.
you can find that over here.
http://forum.xda-developers.com/showthread.php?t=1268997
download --> go to recovery mod --> wipe data and cache --> install zip from SD card --> select zip and wait for some mins and your phone will start cmiui
i have installed 2.1 but you install 1.8 or 2.0 its working fine.
Regards,
cheat.

Tyler83 said:
Yes, I wiped data, cache and dalvik before applying cm7.
I wiped data. I installed 2ndinit 1.9
Click to expand...
Click to collapse
there you go thats the problem installing 1.9 and trying to install cm causes a bootloop use 1.4 that is known to be stable and will work !!!!

[Q] Leedroid Problem

Ive just installed the Leedroid 3.0 Sense add on. It installed fine but now its stuck in a boot loop. Its just keeps booting up. Any Ideas on how i can resolve this problem?

1. Wipe Dalvik Cache and cache - if fails, then:
Wipe Everything and flash LeeDroid ROM again.
It's stated you should do a Nandroid just in case, so if you did one, then use it, if not - reflash.
Or Post some logcat, maybe you'll get lucky and you don't have to wipe.

Screwed up my phone. HELP!!

So, I was running CM9 with D2SD but wanted to remove it because I was getting some problems so I tried to restore my backup with the normal CM9. It didn't restore properly. I then thought that anyways the internal member is very low on CM9 then I should try out MTDPartition. I forgot to edit the txt file which is using while flashing CM7 . It installed but didn't pass the boot screen. I tried flashing again but no use. So I downloaded CWM again and flashed it. Then tried installing CM7. Didn't install! So I flashed CWM again and tried with MTD. It installed.
Everything was working normally. I wanted to flash a theme so I rebooted into recovery and flashed that theme (Which I was using since over a month). It just didn't start my phone then.
Now everytime I reboot, my phone starts the boot screen and then suddenly gets stuck and restarts again. This happens again and again. I tried flashing CM7 and CM9 again but same thing happens always
Please HELP!

Have you tried installing CWM recovery again?
I would recommend, install CWM again, then run superwipe, then MAKE SURE YOU REBOOT INTO RECOVERY (NOT REBOOT SYSTEM), then flash your rom again.
(thanks to blueridge wfs team for the sharing superwipe script).

Before flashing your rom, did you perform the following steps?
1. Wipe Data/Factory Reset
2. Wipe Cache
3. Wipe Dalvik
If not, try to do that first, then flash your rom.

Stuck in boot loop after flashing CM7

Hi all, hoping this is a stupidly simple fix. I wanted to update to latest stable CM7 and so downloaded and flashed it from CWRecovery,
I also ran the factory reset, and cleared the cache.
When I boot, it shows the blue loading screen, then comes to the "Welcome to ADR6300" and reverts to the CyanogenMod7 loading screen..
Then, it keeps bouncing back and forth between these two screens until I pull the battery...

You didn't mention the order of what you did. Assuming you have no valuable data, I would just start over.
Reboot into recovery
Wipe system
Factory reset
Flash ROM
Flash GAPPs (if desired)
Reboot into ROM
Also, ensure you're on the latest CWM, first.

[Solved]
PonsAsinorem said:
You didn't mention the order of what you did. Assuming you have no valuable data, I would just start over.
Reboot into recovery
Wipe system
Factory reset
Flash ROM
Flash GAPPs (if desired)
Reboot into ROM
Also, ensure you're on the latest CWM, first.
Click to expand...
Click to collapse
Worked perfectly! Thank you!!
Apparently the problem was having the wrong version of GAPPs. I was reinstalling but Wiping system was the step I had skipped!

Flashing any rom results in infinite boot

I have tried the roms below:
Pac-rom
LiquidSmooth
CyanogenMod 12.1
CyanogenMod 11
And the result is it always gets stuck at boot where the boot animation continues infinitely. I have gave it about 30 minutes to boot.
With LiquidSmooth I was able to run logcat, but CM12.1 I am not able to.
I have tried resetting system, data, caches in twrp and using the reset for new rom in philz.
I have tried flashing with both TWRP and Philz.
I am using the latest Philz and TWRP.
The only thing that has worked for me is samsung stock ROM, but I do not like the stock ROM.
Are there SPH-L900 phones you have to do something different?
Is there a way to get boot logs from CM12?
Am I doing something wrong?
See attachment from LiquidSmooth.

After flashing http://forum.xda-developers.com/showthread.php?t=2086769 everything worked.

GRMrGecko said:
After flashing http://forum.xda-developers.com/showthread.php?t=2086769 everything worked.
Click to expand...
Click to collapse
Hi,
I see that you got it working by using that thread, but what exactly did you flash from it? I had it working with CM12.1 but decided to flash the recovery from CM for my phone and it ruined the installation. Tried re-flashing with the latest nightly to get stuck in the CM infinite boot, returned to stock (that worked fine) flashed TWRP and CWM 6.0.4.3 Touch, re-did everything again with both, but cant go past the infinite boot. This happened the last time too, but it started working out of nowhere so I continued patching until I flashed "cm-12.1-20150828-NIGHTLY-l900-recovery.img". Now it doesn't boot again and redoing what I did the last time is not working (Wiping Cache, Dalvik...)
Thanks

Raziel10000 said:
Hi,
I see that you got it working by using that thread, but what exactly did you flash from it? I had it working with CM12.1 but decided to flash the recovery from CM for my phone and it ruined the installation. Tried re-flashing with the latest nightly to get stuck in the CM infinite boot, returned to stock (that worked fine) flashed TWRP and CWM 6.0.4.3 Touch, re-did everything again with both, but cant go past the infinite boot. This happened the last time too, but it started working out of nowhere so I continued patching until I flashed "cm-12.1-20150828-NIGHTLY-l900-recovery.img". Now it doesn't boot again and redoing what I did the last time is not working (Wiping Cache, Dalvik...)
Thanks
Click to expand...
Click to collapse
Followed this guide from some post I found after reading for 8 hours, LOL. Don't remember who it is from... It's for the Cyanide ROM but worked perfect for CM12.1 latest nightly with the latest GAPPs
1.) revert everything to stock
Using Odin3 v3.09 I first flashed this: L900VPUCNE2_L900SPTCNE2_SPR.zip
2.) Reboot and verify it's not bricked, then use ODIN to flash Philz philz_touch_6.15.4-l900.tar.md5
3.) Reboot into Philz recovery and follow these steps exactly
1. Mounts and Storage
Format / system
Format / cache
Format / data
Format / data and /data /media (/sdcard)
(note this isn't the EXTERNAL sdcard, on to which I had loaded the ROM, Shift and gapps)
2. Power Options > reboot recovery
3. Wipe cache partition
4. Advanced > Wipe dalvik cache
5. Wipe data / factory reset > Wipe data / factory reset
6. Wipe data / factory reset > clean and install new ROM
At one point Philz asked me if I wanted to root and I said yes.
3.) Flash (from the external sdcard) the ROM (Tablet style ROM found in OP "5.0.2-RC-7.1-tablet"), Then flash Shift (Shift-LP-4.3 other versions DID NOT WORK), then flash gapps (GApps-5.0.2-20150315-signed NO OTHER VERSION WOULD FLASH, got Error 20 every time) Here's the
After everything was flashed I rebooted and got stuck at boot animation AGAIN, so I rebooted into recovery and wiped cache. Just cache, not dalvik or user data, rebooted, and it worked.
Installed Netflix from appstore, when I logged in to netflix it asked me to update google play services (I've seen it do this on other devices as well). Updated google play services and went back to Netflix, chose a random show and tapped on it, stuck at "loading" screen. Rebooted phone, tried netflix again and it works.
This was a tough one! But it's working now and I've saved all these files in one place incase it bricks again. Now to install the Note 3/4 style faux-stitched-leather back cover I got off Amazon.
Thanks all!