Related
I was going to make a Rom but as we are waiting for 2.1 I saw no point!I did this instead.....
This update.zip should be flashed through a custom recovery!! it will root and install busybox.Also includes a script to mount system.
after obtaining su and pressing allow type mnt in shell or terminal to mount system.
saves having to type mount -o re,remount -t yaffs2 /dev/block/mtdblock3 /system everytime.
Also contains apps2sd which is working (as far as i can see) on a standard kernel!
to turn it on..
in cmd window type
adb shell mnt followed by apps2sd on this will only work if you have a ext2/3 partition BEWARE it may remove your apps so you will need to reinstall them
download...
http://www.multiupload.com/05RYNZXFMX
Does it work with stock kernel?
yes I am using stock kernel from 2.73.405.66
Oh.. great news! I am trying to install busybox for days without any success...
But could you tell us what to do with these scripts ?
Thanks a lot!
i would call it a zipfile, not a script, and looking at it it seems that it should be flashed through the custom recovery image...
btw, will this be suitable to root the final release, once it is out? i suppose it will have ro.secure=0 and therefore boot.img needs to be altered?
it contains no boot.img yet so is useable on any rom i think?
As for the script all it does is mount the system like adb remount but on a standard kernel/rom it will say operation not permitted or something similar, so instead with this update.zip type (in a cmd window) adb shell then mnt
and it will say System mounted OK. Voila the system is mounted to allow such things as apps2sd on,rm <FILE> etc..
Installing it through custom recovery SHOULD install all the parts inside and give permissions.
Have updated first post..
what i meant is will it work on a stock rom with release-keys?
but nevermind, i'll just try when it is there...
i have reflashed my phone with WWE 2.73.405.5 146733 CL#61267 release-keys and yes,it works.
I wouldnt just go flashing the 2.1 update when it arrives though you should look into extracting a rom.zip from RUU and only flash the boot.img and the system.img. Otherwise you could end up with a perfected SPL and never be able to root
have now tried with ALL available release key kernels and confirm it works well.Apart from apps2sd,this is random on what kernels it works.
when 2.1 is released I will edit the standard kernels ro.secure thing and will be available here.
There are many changes on initrd that affect both 2.6.25 and 2.6.32, so:
When you update you need to apply this.
If someone post something like wifi doesn't work and he/she didn't apply the update i'll find a way to burn his phone remotely!
I fixed the problem of wifi for polaris (now we use the same module, thanks dzo)
The new initrd:
switch to correct version of modules between 2.6.25 and 2.6.32
change the name of the device
probably fix data corruption
2.6.32 kernel has a new parameter for fake sync so you can make all test you want (please post results in this thread)
2.6.25 is unchanged so when you flash you change only the initrd.
Haret users please download initrd from here.
if you have problem with data connection please let me know!
I suggest you to download latest version directly from atools.
To apply update you can use the boot menu or atools (BSE->select data and system partitions-> select intall update-> put install-seq.sh in sdcard/andboot/)
Download page here
changelog:
updated androidupdate.tgz with su fix
For releaser:
Entract the update on your distro
remove the /system/etc/ppp directory
put the ppp file (extract the zip) on /system/etc/
Click to expand...
Click to collapse
Release your new distro.
Thank You l1q1d
Appreciate everything you do!
I am a Vogue user on sdcard sys-date.img (not ext2), I have updated the 'must' and used the haret lzma, and zImage-11-23-10 .32 kernel but still get this:
sh:2 unknown operand
Automode for system
/init: line 319: /bin/losetup: not found
/init: line 319: /bin/e2fsck: not found
[ 24.743286] EXT2-fs: unable to read superblock
mount: mounting /dev/block/loop1 on /system failed: Invalid argument
Failed
Failed to mount /system
try now, when i update busybox some apps are moved in /sbin/
Thank you for the info
l1q1d said:
try now, when i update busybox some apps are moved in /sbin/
Thank you for the info
Click to expand...
Click to collapse
Sorry got the same result with the new 'NEED' updated.
Do you have di problem with atools or when you boot?
Somthing is wrong with download link i get this ::
XML Parsing Error: not well-formed
Location: http://androidhtc.git.sourceforge.net/git/gitweb.cgi?p=androidhtc/kernel-release.git;a=tree
Line Number 23, Column 117:function padLeftStr(input,width,str){var prefix='';width-=input.toString().length;while(width>0){prefix+=str;width--;}
--------------------------------------------------------------------------------------------------
try with another browser...
Yep link is working just fine. Tried it in IE8 and firefox with no issues. Sounds to me like your browser is having a hell of a time trying to parse xml.
Well it seems to work ok for me, wifi still works, and I will experiment with the vsync setting later.
One problem, the superuser app doesn't work anymore, typing su in a terminal gives:
su: unknown user root
and now roguetools won't work either obviously.
Any ideas what could have caused this? Clearing superuser data didn't help.
I would try to remove the superuser apk and reinstall it from the market, but I can't remove it because I don't have root access now!
So does each kernel now have it's own module folder?
Yes every kernel has his own dir
for su problem:
Code:
mount -o remount,rw /system
echo "root::0:0:root:/:/bin/sh" > /etc/passwd
mount -o remount,ro /system
l1q1d said:
Yes every kernel has his own dir
for su problem:
Code:
mount -o remount,rw /system
echo "root::0:0:root:/:/bin/sh" > /etc/passwd
mount -o remount,ro /system
Click to expand...
Click to collapse
Unable to mount error (not root)
can we just make a passwd file and put
root::0:0:root:/:/bin/sh
will that work?
BTW, very nice update
clemsyn said:
Unable to mount error (not root)
can we just make a passwd file and put
root::0:0:root:/:/bin/sh
will that work?
Click to expand...
Click to collapse
That worked I am able to su now, it doesn't open my su app but I can logcat and rogue tools work (after letting it sleep)
clemsyn, how did you do it?
I put "root::0:0:root:/:/bin/sh" in system/etc/passwd in an androidupdate.tar, but it hasn't worked, I still get the same error
l1q1d said:
if you have problem with data connection please let me know!
Click to expand...
Click to collapse
I applied the patch to 3 different rom freshly installed, Clemsyn's latest international, Scoot's CyanogenMod RLS4c and latest fat free froyo.
Wifi is working correctly but I cannot get 3g-gprs data to work.
APN seems correctly configured.
Am I the only one?
No overclock, panel 3, tilt, atools 1.02 and 0.11 (tried both)
Thank you for update,
is there any chance, that this update can fix thiis problem?
http://forum.xda-developers.com/showthread.php?t=844695
I flashed like hell on weekend and wasnt able to load any page with any 2.6.25 build (I tested many FroYos and even one Eclair). Sad is, that other than WiFi, system was fast and stable :-/
With 2.6.32 I was able to randomly load google.com page but very slow (less than 1kb/s) and cant connect with google acc still. On the top of that system wasnt so stable as with 2.6.25.
Its really weird, that I am only one, who have problem with loading pages
Can it also be caused by my radio: 1.65.38.14 (Touch Cruise Polaris POLA100 panel=1)? Its great for WM 6.5.3, but maybe not so great for WiFi on Andorid? Or is there anyone with working WiFI and that radio?
Otherwise, can someone post a link to tested and best radio for Android (I prefer Fat Free FroYo build, if someone tested it)
mmec2 said:
clemsyn, how did you do it?
I put "root::0:0:root:/:/bin/sh" in system/etc/passwd in an androidupdate.tar, but it hasn't worked, I still get the same error
Click to expand...
Click to collapse
dont put quotations "".
Grandelama said:
I applied the patch to 3 different rom freshly installed, Clemsyn's latest international, Scoot's CyanogenMod RLS4c and latest fat free froyo.
Wifi is working correctly but I cannot get 3g-gprs data to work.
APN seems correctly configured.
Am I the only one?
No overclock, panel 3, tilt, atools 1.02 and 0.11 (tried both)
Click to expand...
Click to collapse
You are not alone I am also having issues with mobile data. I'll look into it later on. I believe it's just a PATH issue in the sysinit.rc but I could be wrong.
for data connection try this:
Code:
mount -o remount,rw /system
rm -r /system/etc/ppp
ln -s /smodem /system/etc/ppp
mount -o remount,ro /system
@spellshaper: next time use search button in polaris section!!!! Flash 1.59.46.12 radio.
l1q1d said:
Do you have di problem with atools or when you boot?
Click to expand...
Click to collapse
The problem lies when I boot, it's before the animation starts or after the 'D-PAD press' to get into the options menu for installation, etc.
Background
To update (flash) a recovery image onto your phone allows you to update or replace your recovery environment on your phone. There are a number of ways to flash a new recovery image, some of the more commonly used methods are using a tool such as ROM Manager or using development tools such as Fastboot. There is also a third method using a standalone utility "flash_image" which allows the flashing of recovery using the terminal emulator on the phone.
flash_image is not a new tool, it has been used on Android since the beginning, many custom ROMs include the utility as part of the ROM itself though not all stock ROMs (including the stock ROM on the G2) include it.
Requirements
1. A permanently rooted (with S-OFF) phone
2. The flash_image binary
3, A recovery image that is compatible with your phone and ROM
3. A terminal emulator application on the phone or use of an ADB shell
Overview:
1. Get the flash_image binary and recovery image onto your phone
2. Copy or move the flash image binary to your system and make executable
3. Use flash_image to update your recovery environment
Stage 1: Get flash_image and recovery image on your phone
1. Download the flash_image binary (not needed if you are running a custom ROM that includes this binary)
2. Download the recovery image you wish to use
You can either directly download the files onto your phone or onto your PC and transfer to your phone. Probably the easiest way to do this is to connect your phone to your computer via USB and mount USB storage, then copy the files to your SD Card. Alternatively you can use ADB Push, bluetooth file transfer or several other methods.
Stage 2: Copy or move the flash image binary to your system and make executable
In terminal emulator:
su
mount -o remount, rw /system
cd /sdcard (or wherever you downloaded/copied the file)
cp flash_image /system/bin
cd /system/bin
chmod 777 flash_image
Click to expand...
Click to collapse
Stage 3: use flash_image to update your recovery environment
In terminal emulator:
su (not needed if using the same terminal session used in the steps above)
cd /sdcard (or wherever you downloaded/copied the recovery image)
flash_image recovery recovery.img (use the appropriate file name for the image file you are flashing)
Click to expand...
Click to collapse
Reboot into recovery and verify that the correct recovery environment is installed
Notes
Any of the commands that call for using a terminal emulator on the phone should work fine using an ADB shell if you prefer.
This was tested on G2 but I can't think of why it would not work on Desire Z or any other phone for which this version of flash_image works. Obviously different phones have different compatible recovery images.
I've attached a zip file containing the flash_image binary that I extracted from the CM 6.1 update zip. I suspect most custom ROMs already have flash_image.
If you are wondering "Why should I use this method over using ROM Manager?" you could be using a recovery image that ROM manager doesn't support, for example ClockWorkMod Recovery 3.x which is required for some experimental ROMs.
If you are wondering "Why should I use this method over using fastboot?" The two main reasons are you can't use fastboot if you are not with a computer with working ADB and using fastboot requires that you have previously flashed the engineering HBOOT.
This is my first guide so I'm open to suggestions or feedback.
Nice one
Though I would suggest that
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
could be simplified to :
Code:
mount -o remount,rw /system
Edit - actually /system isn't even on /dev/block/mtdblock3, and it's not a yaffs2 file system, I suspect that's come from another phone model ?
"dd" will do exactly the same, but no need to install extra stuff since its already there.
dhkr123 said:
"dd" will do exactly the same, but no need to install extra stuff since its already there.
Click to expand...
Click to collapse
I wouldn't have a problem using dd myself. But I would have thought it was much more risky, since instead of typing something relatively user-friendly like "recovery", you're typing in /dev/xyz/abc or similar, which if you get it slightly wrong could be disastrous ?
Excellent, worked for me, flashed CW 3.0 without fastboot
steviewevie said:
Nice one
Though I would suggest that
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
could be simplified to :
Code:
mount -o remount,rw /system
Edit - actually /system isn't even on /dev/block/mtdblock3, and it's not a yaffs2 file system, I suspect that's come from another phone model ?
Click to expand...
Click to collapse
Interesting, I've been using that command since forever (since I first rooted my G1 in early 2009) and it definitely does work on my G2 as well as my wife's MT4G.
I just tried "mount -o remount,rw /system" on my phone and it does not work, mount gives me the "Usage:" messages which seems to mean it wants more parameters.
steviewevie said:
I wouldn't have a problem using dd myself. But I would have thought it was much more risky, since instead of typing something relatively user-friendly like "recovery", you're typing in /dev/xyz/abc or similar, which if you get it slightly wrong could be disastrous ?
Click to expand...
Click to collapse
Unless you run wpthis before dd, you're perfectly safe. The radio partitions are all protected by the power-on write protect feature of the eMMC AS WELL as the linux kernel write protect on low addresses. Worst you can do is blow away your system, data, cache, misc, boot, or recovery partitions, and these are trivial to recover from.
raitchison said:
Interesting, I've been using that command since forever (since I first rooted my G1 in early 2009) and it definitely does work on my G2 as well as my wife's MT4G.
I just tried "mount -o remount,rw /system" on my phone and it does not work, mount gives me the "Usage:" messages which seems to mean it wants more parameters.
Click to expand...
Click to collapse
Depends on whether or not the mount command can tell the associations between the devices and mount points, which is determined by either system configuration, or what mount command you are using (i.e. android's mount or busybox mount).
raitchison said:
Interesting, I've been using that command since forever (since I first rooted my G1 in early 2009) and it definitely does work on my G2 as well as my wife's MT4G.
I just tried "mount -o remount,rw /system" on my phone and it does not work, mount gives me the "Usage:" messages which seems to mean it wants more parameters.
Click to expand...
Click to collapse
Sorry, there should have been an extra space, this works on my phone :
Code:
mount -o remount, rw /system
I don't have a "/dev/block/mtdblock3" on my system. My system partition is mounted on /dev/block/mmcblk0p25, and it is ext3 not yaffs2.
What ROM are you running ? I am running the stock DZ 1.34 ROM. I wonder if you are running Gingerbread ?
steviewevie said:
Sorry, there should have been an extra space, this works on my phone :
Code:
mount -o remount, rw /system
I don't have a "/dev/block/mtdblock3" on my system. My system partition is mounted on /dev/block/mmcblk0p25, and it is ext3 not yaffs2.
What ROM are you running ? I am running the stock DZ 1.34 ROM. I wonder if you are running Gingerbread ?
Click to expand...
Click to collapse
I'm running the Stock G2 T-Mobile post-OTA ROM, definitely not Gingerbread.
Edit: I just tried your method and it works, I will update the guide because your way is simpler and sounds like a safer choice.
you could just rename the CW 3.x.x recovery to the exact named recovery slap it in the cloclwork download folder after you delete the old one and flash it with CW just a quicker trick for GB roms
Not sure that's actually quicker, at least I don't think it would be for me, especially if you are changing recoveries with any frequency (like if tying out Gingerbread ROMs then going back to a 2.2 ROM) because you'd need to constantly rename your recovery images. With my method you would only need to leave the two files named as they are, or for expediency you could rename to recovery.img and recovery3.img then when you wanted to switch you could just execute:
flash_image recovery recovery.img
Click to expand...
Click to collapse
or
flash_image recovery recovery3.img
Click to expand...
Click to collapse
Depending on which recovery you wanted at that point & time.
As I said in the guide, there are already a number of options available, using ROM Manager and fastboot are the most commonly seen in guides but your method and mine are other options for people for whom they work better.
Works!!!
Hi my friends!
It worked for me flawlessly. I was using virtuos 0.9 on my desireZ
Great description, but file did not work for me
It's a very good description that a novice like me can follow. And, I am sure the provided file works for many of you, since many of you reported it to work. After following this guide, and not getting it to work (Stopping Signal error), I decided to find another binary file for flash_image, and the other flash_image file worked for me on my Sprint CDMA Hero. My phone currently has aospMod v0.9.9.2 | AOSP 2.2.1(12/10/2010), if it matters.
One can download a flash_image from here http://cyanogen-files.carneeki.net/flash_image.zip
Then unzip and place on sdcard - follow all the steps in the original post of this thread.
It is my understanding that this file is not unique for different android phones, but if I am incorrect, someone please reply to this thread to correct me.
Again, great job in summarizing the steps.
Regards,
Sanjiv
so darn easy! thank you!
Also usable for splash screen ??
Just curious,
Anybody tried to use flash_image to flash a custom splash screen ?
Something like :
flash_image splash1 customsplash.img
very good post for a newbie like me, just want to make sure, do i need to do the stage 2 every time I flash the recovery?
jaoyina said:
very good post for a newbie like me, just want to make sure, do i need to do the stage 2 every time I flash the recovery?
Click to expand...
Click to collapse
No, you only need to do stage 2 once, whenever you update/change recoveries from that point forward just use stage 3.
Is there a way I can reflash a recovery without access to the ROM?
I'm stuck at the HTC splash screen, so I'm basically stuck in my current (broken) recovery.
sanjivp2000 said:
One can download a flash_image from here (..)[/URL]
Click to expand...
Click to collapse
The flash_image in the start post did not work for me, the one above did.
Also, my HTC Hero was missing the cp command.
Instead, I used: cat /sdcard/flash_image > /system/bin/flash_image
Successfully flashed recovery again
hi guys, a friend of mine is asking me if there's something i can do to make her cp a bit faster/ smoother running stock rom (gb 2.3.6) since he don't want to use any custom rom. her cp
searching the thread, i was able to read some info that some was able to flash mod/ tweaks on stock roms to at least improve its performance. so i'm planning to install andrenaline engine or crossbreader on it but, as far as i know, flashing them requires ur rom, aside from of course being rooted, have cwm, etc., to support init.d which stock roms don't have. (corect me if i'm wrong)
i'm a bit in doubt doing this in the fist place, so any guide/ help or suggestions to make this init.d thing work is really really much appreciated. thnx in advance!
info i got (xda forum) about making stock rom support init.d Enable Init.d for Any Phones w/o Need of Custom Kernels
here, this link provide init.d support;
http://forum.xda-developers.com/showpost.php?p=32716432&postcount=3
flash zip_init.zip.
copy zip_init.zip to sd-card,
boot to cwm, mount /system, mount /data then flash zip_init.zip
check for test.log in /data if it is there or not, no test.log not working.
it work on my stock rom.
also flash adrenoboost v0.7 will boost perfromance from stock 5000 to 7000 (antutu benchmark).
adrenoboost link;
http://forum.xda-developers.com/showthread.php?t=2167228
saintsoh said:
here, this link provide init.d support;
http://forum.xda-developers.com/showpost.php?p=32716432&postcount=3
flash zip_init.zip.
copy zip_init.zip to sd-card,
boot to cwm, mount /system then flash zip_init.zip
check for test.log in /data if it is there or not, no test.log not working.
it work on my stock rom.
also flash adrenoboost v0.7 will boost perfromance from stock 5000 to 7000 (antutu benchmark).
adrenoboost link;
http://forum.xda-developers.com/showthread.php?t=2167228
Click to expand...
Click to collapse
thnx for the reply bro. about the adrenoboost, i think its main purpose is to boost the performance of Adreno 205 GPU or similar gpu but my friends device doesn't have gpu.
i didnt know tat.
anyway i think after mount /system, u should also mount /data (just in case).
it work on my sgw without mount /data but then i saw check /data for test.log which makes it necessary or not?
i'm not sure, just be on the safe side mount /data.
saintsoh said:
i didnt know tat.
anyway i think after mount /system, u should also mount /data (just in case).
it work on my sgw without mount /data but then i saw check /data for test.log which makes it necessary or not?
i'm not sure, just be on the safe side mount /data.
Click to expand...
Click to collapse
okay, i'll try that and hope it'll work
EDIT: sad, it didn't work
just learn something new when i reverted back to stock and re-install zip-init for init.d support.
when flash zip_init.zip and reboot, cwm will ask to "disable recovery flash" - select "NO".
(note: if select "yes", it will give a false positive, 'install-recovery.sh' will not have execute permissions and init.d support will not work).
after troubleshoot found out the install-recovery.sh is not in execute permission (rwxr--r-- instead of rwxr-xr-x).
by correcting the 'install-recovery.sh' permission, init.d support will work again.
ps;
must install busybox app (do a normal install).
saintsoh said:
just learn something new when i reverted back to stock and re-install zip-init for init.d support.
when flash zip_init.zip and reboot, cwm will ask to "disable recovery flash" - select "NO".
(note: if select "yes", it will give a false positive, 'install-recovery.sh' will not have execute permissions and init.d support will not work).
after troubleshoot found out the install-recovery.sh is not in execute permission (rwxr--r-- instead of rwxr-xr-x).
by correcting the 'install-recovery.sh' permission, init.d support will work again.
ps;
must install busybox app (do a normal install).
Click to expand...
Click to collapse
i got busybox installed, but i'm having status 0 error in CWM. in troubleshooting guide, it says replace the update-binary in zip-init.zip with a working update-binary of your phone and i don't how to do it
dec0der said:
i got busybox installed, but i'm having status 0 error in CWM. in troubleshooting guide, it says replace the update-binary in zip-init.zip with a working update-binary of your phone and i don't how to do it
Click to expand...
Click to collapse
update-binary is in the zip file, just download the latest which is the v2 and re-flash again.
if still doesn't work, try get help from init.d support thread.
i didn't get it working on the first time twice but somehow get it work again again.
saintsoh said:
update-binary is in the zip file, just download the latest which is the v2 and re-flash again.
if still doesn't work, try get help from init.d support thread.
i didn't get it working on the first time twice but somehow get it work again again.
Click to expand...
Click to collapse
it was v2 of zip_init that i use and i think i re flashed it 5x already and still getting that error anyways, thnx 4 ur help bro, godbless!
dec0der said:
it was v2 of zip_init that i use and i think i re flashed it 5x already and still getting that error anyways, thnx 4 ur help bro, godbless!
Click to expand...
Click to collapse
superusers app needed for terminal emulator, fx explorer(root access), busybox and script manager apps installed for root access.
use script manager, look for install-recovery.sh in /etc or system/etc (both r the same directory).
touch su n boot icon, su will turn green n boot will turn blue. reboot.
or
use fx explorer to set file permissions if u do not know linux commands.
google play search for fx explorer app and fx root addon (enable root access).
use root folder, look for install-recovery.sh in system/etc.
touch tool menu below and mount read-write then u can change file permission.
or
if u r familiar with linux commands, u can use terminal emulator to change file permission.
check install-recovery.sh permission is rwxr-xr-x, not other like rwxr--r--.
how2check in emulator, type n press enter:
ls -l etc/inst* ↵
how2change file permission, type n press enter:
su ↵
cd etc ↵
mount -o remount rw /system ↵
chmod 755 install-recovery.sh ↵
exit ↵
exit ↵
done, there shouldnt be any error, reboot.
if not re-flash zip_init.zip, reboot, select "NO" to disable flash recovery.
saintsoh said:
superusers app needed for terminal emulator, fx explorer(root access), busybox and script manager apps installed for root access.
use script manager, look for install-recovery.sh in /etc or system/etc (both r the same directory).
touch su n boot icon, su will turn green n boot will turn blue. reboot.
or
use fx explorer to set file permissions if u do not know linux commands.
google play search for fx explorer app and fx root addon (enable root access).
use root folder, look for install-recovery.sh in system/etc.
touch tool menu below and mount read-write then u can change file permission.
or
if u r familiar with linux commands, u can use terminal emulator to change file permission.
check install-recovery.sh permission is rwxr-xr-x, not other like rwxr--r--.
how2check in emulator, type n press enter:
ls -l etc/inst*
how2change file permission, type n press enter:
su
cd etc
mount -o remount rw /system
chmod 755 install-recovery.sh
exit
exit
done, there shouldnt be any error, reboot.
if not re-flash zip_init.zip, reboot, select "NO" to disable flash recovery.
Click to expand...
Click to collapse
busybox was installed correctly as i can see the folder bin/ xbin. it's rooted already so superuser was in there and i used root explorer file manager. i can't find install-recovery.sh in /etc or system/etc which maybe means that it was not working
dec0der said:
busybox was installed correctly as i can see the folder bin/ xbin. it's rooted already so superuser was in there and i used root explorer file manager. i can't find install-recovery.sh in /etc or system/etc which maybe means that it was not working
Click to expand...
Click to collapse
1) phone is rooted,
2) superuser app installed,
3) busybox app installed,
4) root explorer file manager app installed,
5) no install-recovery.sh in /etc or system/etc?
6) no test.log in /data?
7) re-flash zip_init.zip, reboot, select 'NO' to disable flash recovery?
8) no init.d directory in /etc?
9) in etc/init.d directory, there should have two files 00test n 08setperm. in /etc should have install-recovery.sh file.
10) u dont have these three files?
flashing cant write on system directory, means manufacturer locked the system.
unless u can find way to break the lock.
saintsoh said:
1) phone is rooted,
2) superuser app installed,
3) busybox app installed,
4) root explorer file manager app installed,
5) no install-recovery.sh in /etc or system/etc?
6) no test.log in /data?
7) re-flash zip_init.zip, reboot, select 'NO' to disable flash recovery?
8) no init.d directory in /etc?
9) in etc/init.d directory, there should have two files 00test n 08setperm. in /etc should have install-recovery.sh file.
10) u dont have these three files?
flashing cant write on system directory, means manufacturer locked the system.
unless u can find way to break the lock.
Click to expand...
Click to collapse
1-4 yes, all done
5-10 don't have those files coz i got status 0 error flashing zip_init.zip v2 in CWM
if thats the case, maybe i'll try to flash different stock firmware 1st
dec0der said:
1-4 yes, all done
5-10 don't have those files coz i got status 0 error flashing zip_init.zip v2 in CWM
if thats the case, maybe i'll try to flash different stock firmware 1st
Click to expand...
Click to collapse
try manually put in those files in their respectively directories.
unzip n try putting those files in their respective order.
create a init.d directory in /etc then put those two files 00test n 08setperm into it.
put the install-recovery.sh in /etc, set all permissions to rwxrwxrwx.
(upload manager doesnt allow .sh file, rename install-recovery.sh.txt to install-recovery.sh)
done, reboot n see it works or not.
saintsoh said:
try manually put in those files in their respectively directories.
unzip n try putting those files in their respective order.
create a init.d directory in /etc then put those two files 00test n 08setperm into it.
put the install-recovery.sh in /etc, set all permissions to rwxrwxrwx.
(upload manager doesnt allow .sh file, rename install-recovery.sh.txt to install-recovery.sh)
done, reboot n see it works or not.
Click to expand...
Click to collapse
okay, i'll try that. thnx
The Xperia M sure packs a lot in such a small device, but then, does it pack enough internal memory to install a huge number of applications? It does not. With just a little over 2 GB, it is very cumbersome to find that you cannot download data for large games. This guide aims to resolve that issue. Although it is not very user friendly at the moment (it requires you to type a few lines on the phone), I will get back to creating a script that you can execute this weekend.
Note: This guide requires you to be rooted. For rooting, you can follow this guide.
Step 1: Setting up stuff
Find and download a suitable file explorer that allows you to modify and browse system files. I recommend Root Explorer. (Optional)
Download and install Terminal Explorer from the Google Play Store.
Download and install Script Manager from the Google Play Store. (Optional)
Step 2: Walking the path
Open Terminal Emulator and type in
Code:
su
Your root manager should request you for permission. Grant the app superuser permission.
Type in
Code:
vold
Press enter
Type in
Code:
mount -t vfat -o umask:0000,uid=1000,gid=1023 /dev/block/vold/179:33 /storage/sdcard0
Press enter.
Type in
Code:
mount -o bind /data/media /storage/sdcard1
Press enter.
Click to expand...
Click to collapse
And, that's it! You're almost done. Go to Settings > Storage and check the internal and external storage to see that they have been mounted. You can now install huge games and enjoy them on your M. This is a temporary workaround until this weekend as I will write a script to automate this once my exams are over. If anyone else wants to do it, they're welcome to!
Note: You will have to type this again every time you reboot the device. A bit cumbersome, but I hope you can hold on till the weekend.
Credits:
@darz
@raw235
@mattiadj
@Ace King 34
not work in FW XM Dual
how to swap internal and external in FW XMD ?
@gadgetroid , will it work in Xperia M Dual 4.2 ?
It Worked!!!
gadgetroid said:
The Xperia M sure packs a lot in such a small device, but then, does it pack enough internal memory to install a huge number of applications? It does not. With just a little over 2 GB, it is very cumbersome to find that you cannot download data for large games. This guide aims to resolve that issue. Although it is not very user friendly at the moment (it requires you to type a few lines on the phone), I will get back to creating a script that you can execute this weekend.
Note: This guide requires you to be rooted. For rooting, you can follow this guide.
And, that's it! You're almost done. Go to Settings > Storage and check the internal and external storage to see that they have been mounted. You can now install huge games and enjoy them on your M. This is a temporary workaround until this weekend as I will write a script to automate this once my exams are over. If anyone else wants to do it, they're welcome to!
Note: You will have to type this again every time you reboot the device. A bit cumbersome, but I hope you can hold on till the weekend.
Credits:
@darz
@raw235
@mattiadj
@Ace King 34
Click to expand...
Click to collapse
Worked for me
13 GB internal storage
aerialus said:
not work in FW XM Dual
how to swap internal and external in FW XMD ?
Click to expand...
Click to collapse
I will need your help for that. If you can use ADB and pull these files for me and zip and upload here, it would certainly be very helpful.
Pull the folder "/dev/block/vold"
Open Terminal Emulator that you downloaded and run these scripts
Code:
cat /proc/partitions > partitions
Press enter
Code:
mount > mount
Then, on the computer, open a command prompt window (or terminal on Linux) and type in
Code:
adb pull /partitions
Code:
adb pull /mount
Put these two files in the zip along with the vold folder and post them here. I will look into it and provide you the guide.
jereMarfil24 said:
@gadgetroid , will it work in Xperia M Dual 4.2 ?
Click to expand...
Click to collapse
Since it runs 4.2, I can't be very sure, as Sony may have changed device names. Once the above user submits the files, I will look into it and post the guide.
gadgetroid said:
I will need your help for that. If you can use ADB and pull these files for me and zip and upload here, it would certainly be very helpful.
Pull the folder "/dev/block/vold"
Open Terminal Emulator that you downloaded and run these scripts
Code:
cat /proc/partitions > partitions
Press enter
Click to expand...
Click to collapse
i never use ADB ,, but i will try,,
when i do
Code:
cat /proc/partitions > partitions
in terminal emulator, the result is "can't create partitions: read only file system"
what is my fault?
Did u written su above?
Sent from my C1904 using Tapatalk 4
aerialus said:
when i do
Code:
cat /proc/partitions > partitions
in terminal emulator, the result is "can't create partitions: read only file system"
what is my fault?
Click to expand...
Click to collapse
Perhaps you aren't rooted. That is why the script in the OP didn't work for you either.
When you type in su in the terminal, do you get any prompt on your phone?
Or perhaps it could be that you haven't rooted the device completely. You need busybox for making any operations on the ~/ partition.
gadgetroid said:
Perhaps you aren't rooted. That is why the script in the OP didn't work for you either.
When you type in su in the terminal, do you get any prompt on your phone?
Or perhaps it could be that you haven't rooted the device completely. You need busybox for making any operations on the ~/ partition.
Click to expand...
Click to collapse
my device is already rooted and have Busybox installed,,
please look at my attachment
aerialus said:
my device is already rooted and have Busybox installed,,
please look at my attachment
Click to expand...
Click to collapse
Have you used root fixer? As mentioned by the OP of the root thread? If you have ES File Explorer, just try mounting the system partition as r/w over there. If it reboots immediately, then you aren't rooted properly yet.
aerialus said:
i never use ADB ,, but i will try,,
when i do
Code:
cat /proc/partitions > partitions
in terminal emulator, the result is "can't create partitions: read only file system"
what is my fault?
Click to expand...
Click to collapse
If I understand right the command will create the files "partitions" and "mount" directly into the root path that's why it claims "r/o file system"
try
Code:
cat /proc/partitions > [COLOR="Red"]/sdcard/[/COLOR]partitions
and pull it on your computer then with
Code:
adb pull [COLOR="red"]/sdcard/[/COLOR]partitions
same with "mount"
this should create those files into the sdcard which is not read only.
gadgetroid said:
Have you used root fixer? As mentioned by the OP of the root thread? If you have ES File Explorer, just try mounting the system partition as r/w over there. If it reboots immediately, then you aren't rooted properly yet.
Click to expand...
Click to collapse
in XM Dual no need use rootfixer anymore,,
just root with tools and success full root,,
magicw said:
If I understand right the command will create the files "partitions" and "mount" directly into the root path that's why it claims "r/o file system"
try
Code:
cat /proc/partitions > [COLOR="Red"]/sdcard/[/COLOR]partitions
and pull it on your computer then with
Code:
adb pull [COLOR="red"]/sdcard/[/COLOR]partitions
same with "mount"
this should create those files into the sdcard which is not read only.
Click to expand...
Click to collapse
ok i will try :fingers-crossed:
Yes. That is exactly what it does. It works if you put in sdcard
Script
I have created a script for this. If OP gives me permission i can publish it.
pull partitions and mounts success,,
but when i try to pull folder "/dev/block/vold"
the result is " 0 files pulled, 0 files skipped"
see my attachment
icoolguy1995 said:
I have created a script for this. If OP gives me permission i can publish it.
Click to expand...
Click to collapse
Sure, go ahead. Publish it. Are you sure its working? Cause when I created a script, it used to give me errors. That is why I posted this huge tutorial.
gadgetroid said:
Sure, go ahead. Publish it. Are you sure its working? Cause when I created a script, it used to give me errors. That is why I posted this huge tutorial.
Click to expand...
Click to collapse
I have attached the script in attachments.
STEPS TO EXECUTE
1) Download script
2) place it in SD card and open any Explorer in which you can change permissions.
3) Go where you have placed script and change its permission (Thick all the boxes)
4) Execute it.
But it will last till a reboot only
Simple Way
1) Download script manager from play store
2) Execute script with it and tick the boot,su option and tick it is executable.
Your memory is swapped
icoolguy1995 said:
I have attached the script in attachments.
STEPS TO EXECUTE
1) Download script
2) place it in SD card and open any Explorer in which you can change permissions.
3) Go where you have placed script and change its permission (Thick all the boxes)
4) Execute it.
But it will last till a reboot only
Simple Way
1) Download script manager from play store
2) Execute script with it and tick the boot,su option and tick it is executable.
Your memory is swapped
Click to expand...
Click to collapse
I'll add it to the op soon. BTW, if you place the script in /data folder and set it to rw-r--r--, it will be easier. That way, the script won't be in the wrong drive after it's been switched.
No it will not work unless all the options are ticked on permission setting.
icoolguy1995 said:
No it will not work unless all the options are ticked on permission setting.
Click to expand...
Click to collapse
It works for me with rw-r--r--
This message was brought to you by my Sony Xperia M (C1905), using the XDA app.