I have successfully configured vpn on my phone to connect to my home network. Unfortunately I have no idea what this is useful for. Can anyone give any suggestions?
gillepy said:
I have successfully configured vpn on my phone to connect to my home network. Unfortunately I have no idea what this is useful for. Can anyone give any suggestions?
Click to expand...
Click to collapse
VPN or Virtual Private Network gives you the ability to connect from a hotspot to your home network. Once connected you can use the services of your own network while being somewhere else. For example if you have set up a DLNA server at home, you can watch your movies while sitting in the park for example. This is of course if both your home internet connection and the hotspot's connection can spare the bandwith required for the service you are using and the service doesn't mind the extra lag.
VPN is more useful if you connect to your business network, because companies usualy limit the services and data that can be accessed from the internet.
That's the theory anyway, because I can't test that feature - my router doesn't support incoming VPN connections.
Related
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
Hi Everyone,
Sorry if this is a dumb question, I'm fairly good with Android/computer-y stuff in general, but I have absolutely no experience with VPNs so my knowledge of them is very limited.
I know that if I set up a VPN with my home network, I'll be able to access things like private network shares over the internet. This is great, but I'm curious if I can use the VPN to route my phone's network traffic through my home internet connection? I know it'll add latency, but I'm mainly interested in giving my phone the same external IP as my home network, even while out and about. I feel it'd probably help from when I'm on IRC and the phone disconnects and reconnects every time I connect to Wireless, but if it was all done over VPN, it shouldn't matter. Is this possible with a VPN, or do I still have to go about setting up a proxy server?
When you connect to your home VPN - it's IP range will be the same as if you were at home, connected normally to the wifi network.
Now that's what I wanted to know! Thanks, Tander!
I have Desire. Try to create VPN connection to my work net over 3g, GPRS or Wi-Fi. Tunnel creation is succesful. It's working perfect for 15-20 seconds then nothing. No any warnings in Phone. VPN Server says it's OK. But net resources and RDP connections are unavailable. I'm using IPsec/PP2P protocol. Server with Win2k.
Also try to connect to another VPN server (router). Same result in such different situations
Same problem here. Using hideipvpn.com service. No internet connection when connected to vpn
up? Somebody help pls
Old WinMo works excellent but my new Android doesn't want
Hello,
I want to use portable Wi-Fi hotspot on my phone to connect to my laptop in places where public wi-fi is not available, or to connect to two computers to each other. And it seems to be working.
But I have a problem. I do not want to use mobile network to access Internet for those computers. I want only to exchange data between phone and computer, or between computers themselves.
But every time I switch on hotspot, 3G connection switches on automatically, even if it is switched off on purpose. I know this is intended use of hotspot, but I have a question:
Is there a way to prevent phone switching 3G network on in wi-fi hotspot mode, or just preventing data traffic over 3G?
Or I am missing the point completely?
The application is not intended for such usage; all it does is route traffic between connected wlan-clients and the carrier's apn. The phone itself has the ip-address 192.168.1.1 during this setup, but it is not listening on any ports that would be useful for your setup (ie 'cifs/samba').
LeeCHeSSS said:
The application is not intended for such usage; all it does is route traffic between connected wlan-clients and the carrier's apn. The phone itself has the ip-address 192.168.1.1 during this setup, but it is not listening on any ports that would be useful for your setup (ie 'cifs/samba').
Click to expand...
Click to collapse
I do not know if I do understand you but here are the facts:
I connect two dell laptops to portable wi-fi hotspot on my wildfire s:
one is : 192.168.1.135
other : 192.168.1.185
I can ping one from another. If I share a folder in one (.135) and go to others(.185) "Search for computers or people" I see all files in shared folder and can do all the usual operations over them (edit, move...)
Also if I install Remote Web Desktop from Market on my phone I can access phone through web interface.
In a word, I can do all things as on "normal" wi-fi network ( and I promise it is the only network around here ) except all the time I have 3G switched on. And I do not want to do that because I see my network data traffic going up.
So, as I see things, my only problem is unwanted 3G traffic.
Help?
Ah, but you did not mention that you had installed a seperate application to open up a port for the webinterface.
This however does not change the intended usage for the mobile wifi hotspot application!
hey...you can try this:
1. go to your mobile network settings
2. create a new APN, a dummy one
3. set the new APN as default
4. launch your wifihotspot
I did not test it with 2 pcs but, when u launch wifihotspot, 3g no longer comes on and my pc still connected to the wireless network without any problems.
Let us know your results
Cheers,
Hey,
I ran more test on this issue. The previous posted solution works like a charm.
I was able to use the wifihotspot as a wireless access point:
1. 2 or more PCs can communicate with each other (browse folders)
2. If one of the PCs has internet access, it shares to the rest of the PCs
3. If one of the PCs has an ethernet connection to a server, all other PCs also get connection to the server
For 3. to work, you will need to brigde the local area connection with the wireless connection on the PC that has cabled ethernet connection. Also browsing folders will work only if you use \\server ip (\\servername does not work).
I will try getting DNS access via the hotspot later.
Hope this helps
Is there any way for the fire TV to connect to it? My university uses it, and I was wondering if I could connect, but the access point is not showing up
Can´t look now because I´m not at home but wasn´t there a setting for a manual AP setup where you could enter the SSID by yourself?
Some organizations may keep a second network available for legacy devices like printers, XBoxes, and older machines. You can check with your university's tech support to see how you can add your device to the list of allowed access for that network.
This isn't a guarantee that this network exists for you, but most enterprise and even some residential-grade equipment have this capability.
Otherwise, you might be able to find a router or range extender that can understand and connect to WPA2-Enterprise to work around this. In a pinch, an old laptop with two wifi cards or a wifi Ethernet port should suffice.
Or you may want to scrap wifi and run an Ethernet cable to your dorm's jack or personal switch.
Related topics found through Googling, but no further help:
https://www.reddit.com/r/cordcutters/comments/2sv1ov/best_option_for_college_wifi/
https://www.reddit.com/r/fireTV/comments/2mydhh/fire_tv_stick_can_you_use_a_wireless_network_that/
Thanks the responses, but neither of them works well for me. there is a secondary unsecured wifi network, but it is just too slow to use, especially for streaming videos. I sideloaded a wifi APK onto it, and the networks DO show up, but there is no way to enter the login information (you need both a username and password.) Anyone know of an app that can do that?