Defy Update 2.51.1.en.DE installation impossible - Defy General

Since today the Defy of my Girlfriend finds the OTA Update 2.51.1.en.DE but it wont install.
After pressing Install the Device reboots and the status bar is showing for 2 seconds. Then the Installation hangs up and switches to the warning triangle.
After moving the Battery out and in it reboots normal without the Update.
The Device is rooted and has Recovery installed.
Any Ideas?

maybe you should just manually flash the en.GB Version, works well, all in german too. :=) (have it installed on my phone)
so there's no difference between using the OTA update or this version.
maybe there're some doublechecks with root and the custom recovery which makes it impossible.
why did u install root and recovery to your girlfriends phone? man - that's just bringing work ;=P
gl
cV
Ps.: just use RSDLite, works like a charm, if u really want to

Anyone can post how i can unroot my phone again? I dont want to install any other then the official ROM for EU/Germany.

can the Rom fix the flashlight problem? I have undated the flashlight fix and now my flashlight is not working properly. There is dark green light when it flashes.
sorry for my poor English..

Related

Red Question mark when doing update before Froyo?

My bro checked his UK, unbranded Desire for updates and noticed that he has an update of around 30MB and not Froyo.
He thinks that maybe he never installed this one and Froyo will show after he first installs this. He goes to install it, but after the green arrows, a red question mark appears in the middle of the screen with a phone. The phone just restarts as normal after this and the update is not applied.
What's causing this? I think it's the 1.21 update if I remember rightly.
His phone IS rooted but it's stock ROM.
No-one knows the answer?
Has he tried un-rooting?
apparently from what ive heard you cant get OTA updates if you've had your phone rooted
That must be it then.
I'll probably skip the official update then and get a decent custom ROM for him.

[Q] Process system is not responding - Force close or Wait

Hi there
I think I destroyed my CPU or something ... I used a custom kernel which does OC and UV and it worked without any glitches for about 8 hours.
Then it froze and now I cannot boot any rom.
If there is user data it boots to a frozen lockscreen.
If I do a factory reset it says that the Process system is not responding...
Anybody got an idea?
I just flashed the official SLCD RUU and now it works again ...
I can only run official ROMs
If I root and flash a new one, the same error persists!
anybody any idea?
I cannot really tell HTC to replace my phone, it works with their froyo version :S
but I don't like Sense and now I'm stuck using it ... hate that -.-
Well you rooted with an RC of unrevoked. Could as well have something to do with that. Have you tried custom sense roms? Just to see if they work. Else, i would try the downgrade-to-hboot-0.83-method.. just practice the screenless method with the screen turned on, i managed to do iy in one attempt (H)

How to turn off update warning on a rooted nexus?

My phone is rooted and a custom rom is installed but i keep getting the official google warning to update my phone. I tried updating to see if it would go away but it freezes the phone probably because I am rooted. Does anyone know how to turn the update warning off.
yamilrx said:
My phone is rooted and a custom rom is installed but i keep getting the official google warning to update my phone. I tried updating to see if it would go away but it freezes the phone probably because I am rooted. Does anyone know how to turn the update warning off.
Click to expand...
Click to collapse
1. Wrong section
2. Try flashing a newer or updatable rom - most of the newer roms that are out do not have this warning, and if they ever do they won't crash when you try to update.

HTC ONE X Problem with camera

Hello everyone yesterday I opened bootloader and flash custom rom (ARHD V21) and custom recovery (TWRP) using this post http://forum.xda-developers.com/showthread.php?t=2069904&highlight=stock+recovery
the thing is as I finished everything and had the ARHD V21 I noticed there's problem with my camera !
the problem is sometimes it can get into camera right away without any issues and sometimes it a bit stucks and even force close with messege unable to start the camera and sometimes it force closed without an Error at all !
but when I switch to front camera it shows me Fofocim and then turns purple with lines ahead
I tried another camera app called MXCamera and factory reset and restore backup still problem exist !
so I decided to back to completely stock rom so I relock bootloader and flash custom rom and then run the RUU for my version
(CID HTC_044) software 3.14.707.24 ASIA WWE first it was work almost completely fine but sometimes when I press to enter the camera app it was stucks and even force closed without an error at all but the front camera was working fine so I did soft restart and the problem I talked about before back
what can I do to fix it ?
thanks in advance
heres screenshots of the problem : http://img211.imageshack.us/img211/6827/003xf.png
http://img692.imageshack.us/img692/9919/004rn.png
Was it working before? Did it happen only after you flashed the ROM?
I didn't noticed that but never mind I was at the store today and they fixed my both cameras now thank god it working great !
and also got OTA update today to 3.20.401.1
thanks you can lock this post

[Q] Back to stock, touchscreen does not work after OTA update

I did a restore of my One-X to stock rom according to this tutorial.
http://design-extreme.net/restore-ht...-to-stock-rom/
This all went well and without problems. The RUU I flashed is this one.
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Ra dio_5.1204.162.29_release_302015_signed
When I now startup the phone it all works perfect. Then the phone says there is an OTA (to 3.20 I believe)
I download and install the OTA and the phone restarts, but after restarts the phone's touchscreen does not work anymore.
I solved this for now by installing the 3.14RUU again, then it works again. But of course I would like to be able to install the OTA's
To me it sounds like a driver problem in the new version that prevents the touchscreen from working. Anyone have idea how to solve this?
I tried different boot.img after the OTA update but none of them solved the problem. Somebody here who has a good idea?
Xanion said:
I did a restore of my One-X to stock rom according to this tutorial.
http://design-extreme.net/restore-ht...-to-stock-rom/
This all went well and without problems. The RUU I flashed is this one.
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Ra dio_5.1204.162.29_release_302015_signed
When I now startup the phone it all works perfect. Then the phone says there is an OTA (to 3.20 I believe)
I download and install the OTA and the phone restarts, but after restarts the phone's touchscreen does not work anymore.
I solved this for now by installing the 3.14RUU again, then it works again. But of course I would like to be able to install the OTA's
To me it sounds like a driver problem in the new version that prevents the touchscreen from working. Anyone have idea how to solve this?
I tried different boot.img after the OTA update but none of them solved the problem. Somebody here who has a good idea?
Click to expand...
Click to collapse
Kicking my own question. No-One who has an idea or thought? I've tried everything I could think off and would appreciate some fresh thoughts.
I have almost the same problem now. I was running CWM 10.2 with the TWRP recovery and reverted back to stock using a backup from this thread: http://forum.xda-developers.com/showthread.php?t=1975140
The installation went fine, but touch isn't working anymore. What could be wrong? I would like to have my phone back to stock and use the OTA from HTC.

Categories

Resources