It may be stupid question, but is there a way to answer phone call using play/phone button using factory G2 headset?
...I'm pretty sure if your phone is ringing and your headset is connected, the middle button will answer the phone call. at least thats how it worked for me on stock rom
Related
This problem I am having seemed to start with WM5 AKU 2.3 and is still happening to me in WM6. If someone calls me, and I push the button on my bluetooth headset to answer, my ringtone plays for about a half a second to the person calling me. They usually complain about a loud noise when I answer the phone. I have discovered if I push the answer soft key on my phone instead, it doesn't play the ringtone, but it takes a little longer for my headset to pick up. This happened with my old headset (Plantronics Discovery 640) and my current headset (Jawbone). Has anyone else experienced this problem? If there was some way to adjust the delay for when the headset picks up, I think it would fix this problem because when pressing the key on the phone to answer there is a delay, but when pressing the button on the headset, there isn't.
Thanks...Brian
On my TP2, if a call is coming in and I have the bluetooth headset turned on, the headset will pick up the call only if I answer by pressing the headset answer button. If I answer by sliding the on-screen bar over the green "answer" button, the speaker in the phone itself comes on instead.
Is there a way to change this behavior such that the sound always comes through the headset if it is connected to the device, even if I answer on the phone itself?
I would be interested in this too, as I have a bluetooth car kit, if I accept the call from the car screen it is ok, if I accept it on the phone it routes through the phone.
I'm having a similar issue, but a little more complex it sounds like... When the phone rings and using my bluetooth headset (Jawbone2), I have to:
Press the answer button on the Jawbone2
Ringtone sound now comes through the headset
Remove phone from pocket and Slide2Answer with S2U2
Call is now connected through bluetooth
With my Kaiser, all I had to do was press the bluetooth answer button and the call would automatically pick up. No removing the phone, no pressing buttons or sliding to answer!
If I Slide2Answer on the phone when ringing without "transferring the call to bluetooth" first, the handset picks up the call. Useful in many cases, especially if I can't find the bluetooth after putting it down or in my jacket pocket for the time being. If I use the phone to make a call from the handset with bluetooth connected, it always transfers the sound directly to bluetooth. The problem lies with answering the phone with a bluetooth headset - the 4 steps above need to be completed instead of just #1 like it should be!
if you don't want it to go to the phone you need to answer with the device you want to talk with. thats how bluetooth on phones work, tp and tp2
You stole Boo Boo's Name said:
if you don't want it to go to the phone you need to answer with the device you want to talk with. thats how bluetooth on phones work, tp and tp2
Click to expand...
Click to collapse
I get that, If I try to answer the phone on the headset though, just the sound of the ringtone comes through the headset - the phone is still not answered, and is still ringing, just now in my ear! I STILL have to actually answer it via the phone's controls, which is pretty hard to do if you have your hands full........
For the OP Boo boo is correct. Answer the call on the device you want to use.
For Garcia25 the problem is S2U2. I ended up removing it and going back to the built in lock + LockDevice + built-in slide-to-answer.
S
I have been using the headset from my iphone and they did work fine / picking up calls with the button and hanging call too but after 2.2 the button is not longer working , The mic works i can answer the call from the phone and use the mic but i will have to go back to the phone to end the call. weird... im wondering if i should do a fresh wipe and reflash
gabesir said:
I have been using the headset from my iphone and they did work fine / picking up calls with the button and hanging call too but after 2.2 the button is not longer working , The mic works i can answer the call from the phone and use the mic but i will have to go back to the phone to end the call. weird... im wondering if i should do a fresh wipe and reflash
Click to expand...
Click to collapse
Try 3 quick clicks to answer....where is the documented?
1 clicks pauses/resumes music
2 clicks seems to call last caller?
Long press allows Voice Dial, but then it makes it confirm on the LCD (wtf)?
I am not able to receive call using the stock wired headset by pressing the button on it. Though I can hear the ring. Once I receive the call by using the phone I can have conversation. Again for hangin up I need to use the phone.
The button on the headset does not function. Is this a bug on CM7 or in need to configure some setting ?
Appreciate your reply with possible solution.
thx
Using HTC wildfire with CM7 #86.
Hi. I want to know how to get the iphone 5 headset to work on my galaxy s3? I'm aware the volume control will never work but assumed everything else does. Some have said they have managed to get it working on their galaxy s3 either through specific software or ROM changes?
Right now I can make calls to other with the headset working perfectly, but when I receive calls from others I cannot hear them nor can they hear me. So the problem only occurs when I RECEIVE calls. The mic is really important to me.
Any help would be really appreciated.
OK. I've narrowed down the problem. The headset stops working when I press the middle button to receive calls. In other words, if I answer a call using the actual phone, the headset works fine. If I do press the middle button to receive a call, I can no longer hear the other person nor can they hear me through the headset.
Does anyone use the iphone 5 headset with the galaxy s3? Does the headset work for you?
AbZ__ said:
OK. I've narrowed down the problem. The headset stops working when I press the middle button to receive calls. In other words, if I answer a call using the actual phone, the headset works fine. If I do press the middle button to receive a call, I can no longer hear the other person nor can they hear me through the headset.
Does anyone use the iphone 5 headset with the galaxy s3? Does the headset work for you?
Click to expand...
Click to collapse
Same issue. It does not work for me either.
mexigga said:
Same issue. It does not work for me either.
Click to expand...
Click to collapse
The workaround I'm using now is to have auto-answering enabled while a headset is connected. Now i'm trying to find away to reject calls with a single click but after trying various apps I've not been able to do so.
AbZ__ said:
The workaround I'm using now is to have auto-answering enabled while a headset is connected. Now i'm trying to find away to reject calls with a single click but after trying various apps I've not been able to do so.
Click to expand...
Click to collapse
How to set the auto-answer when using the headset ?
thanks