Develop Bugs

I think I bricked my phone.... Please help!

I have been waiting nearly two months for HTC to get on the ball and release the official version of Windows Mobile 6.5 so I could download it and see if it's worth using as my main phone OS. But they have been lazy and have yet to come out with it. So, I got impatient and began looking into the roms that were already available and how to flash my phone to get them to work. The first step I read that I needed to do was unlock my phone. However, I forgot what the text said at the top of the page (here's the link to the program I used, if that's helpful): http://forum.ppcgeeks.com/showthread.php?t=36062. So I proceeded to use the Diamond Unlocker (as that should have been a huge tip-off to me then, but this was my first ever unlocking experience, so I had no idea what I was doing) Now, my HTC Touch Pro 2 from Verizon won't even turn on. It won't go into a bootloader screen, absolutely nothing happens when I press power button, the reset button, or a combination of any of the buttons on the device.
However, when I plug the phone into my computer, a device does pop up: Qualcomm CDMA Technologies MSM. I can't get anything more than that, though. No software drivers will install, it does try very hard to find some though.
Any help, advice, tips, tricks, random guesses, would be greatly appreciated. Thanks for all your help.

Welcome aboard
try to reflash another ROM
have a deep read here
http://forum.xda-developers.com/showthread.php?t=550540
Good luck,

Buttons don't respond.
I can't get my phone to turn on or even go into bootloader mode. So, without that, I don't understand how I can flash a new ROM onto my phone.
And hello to you as well.
I did read that link, but none of the button codes worked, and my phone isn't responding to the Hard-SPL that I started when my phone was connected. It says that it cannot find the device and I need to resync it. But I start Windows Mobile Device Center and it can't find my phone either.
However, an interesting new development is that my phone, every now and again, starts charging when connected to my computer. The light turns orange, and my computer picks it up. But it does this for a bit, and then it changes back to nothing.

If you can't access the bootloader using any of the methods detailed here, then I hate to say it, but your device is probably bricked. It's really difficult if at all possible to recover when the SPL (AKA bootloader) is severely damaged or completely destroyed. There were some tools a while back to help recover from nuked SPLs, but AFAIK they aren't compatible with the TP2, and you have to be security unlocked, which I can pretty much guarantee you aren't.
Your best bet would be to take it back to the store and play dumb, saying that it "just stopped working" in the hopes that they'll give you a new one, but there are no guarantees it'll work. Best of luck

That's what I need to know
Thanks for the information. I just needed to know what to do. I can't access the bootloader or anything even similar to it, so I am just going to get it replaced and then be much more careful in the future.

[Q] Advanced Ace Hack Kit issue

Earlier today, I ran the updated 15/10/11 version of the ace hack kit. Like it was suggested, I read through the manual then I re-read it and re-read it again. As suggested, I disabled / uninstalled all security software on my pc and the other superfluous services. Ran the executable drivers file then I set the phone to charge only and usb debugging was ticked.
I then ran the hack-ace.cmd file as administrator and let the program do it's thing.
It appeared to have completed without any glitches in the suggested 6 minutes.
However, on the phone, all was not well. Since running this, the screen remains blank. When I power on, I get the HTC logo and then it disappears / disintegrates into a blank screen and nothing happens.
The only reason I ran this was to get rid of the irritating apps that I never use but have to Kill every day.
Can anyone help to overcome this problem? This was a replacement handset that I had to fight with my insurance company to get only for this to happen.
I am literaly at my wits end.
Thanks

anomander0108 said:
Earlier today, I ran the updated 15/10/11 version of the ace hack kit. Like it was suggested, I read through the manual then I re-read it and re-read it again. As suggested, I disabled / uninstalled all security software on my pc and the other superfluous services. Ran the executable drivers file then I set the phone to charge only and usb debugging was ticked.
I then ran the hack-ace.cmd file as administrator and let the program do it's thing.
It appeared to have completed without any glitches in the suggested 6 minutes.
However, on the phone, all was not well. Since running this, the screen remains blank. When I power on, I get the HTC logo and then it disappears / disintegrates into a blank screen and nothing happens.
The only reason I ran this was to get rid of the irritating apps that I never use but have to Kill every day.
Can anyone help to overcome this problem? This was a replacement handset that I had to fight with my insurance company to get only for this to happen.
I am literaly at my wits end.
Thanks
Click to expand...
Click to collapse
i think you need to install custom rom and flash it in recovery follow the steps in instruction in ace hack kit because it happen to me also when I ran the ace hack kit..

avnr said:
i think you need to install custom rom and flash it in recovery follow the steps in instruction in ace hack kit because it happen to me also when I ran the ace hack kit..
Click to expand...
Click to collapse
Yes this is the best thing to do. Something must have corrupted your stock ROM. If AAHK completed properly, then you should have ClockworkMod recovery installed.
The first thing I did was install 4EXT recovery but thats not necessary, that was just a personal choice.
So these are the steps you should take:
1: Download a new ROM and put it on your SD card in a convenient place (I recommend the RCMIX32 Runny 3.1 ROM)
2: Remove the battery and reinsert the battery
3: Hold down the volume down button and then hold down the power button. You will get to a white screen with some green robots on the bottom. This is the bootloader screen. You will have to wait a bit for it to finish scanning the SD card. It will tell you when it is finished
4: Use the volume buttons to select recovery and press the power button to select it
5: After a few seconds the recovery environment will appear
6: Go to the wipe menu. Wipe data, cache and dalvik cache (and system if you have the option. I havent used Clockworkmod in a while so I cant really remember what options you have there)
7: Go a few menu's back and select Install zip from SD card
8: Select the zip file
9: Press yes on the confirmation screen
10: When it is finished, click reboot now. It might be on the menu back
This will install a new ROM and it should work properly. If you have any problems along the way just say and we will help to the best of our ability

Thanks for the responses.
I don't think ClockworkMod is installed as there are no options available when I select recovery. It just reboots the device back to the HTC splash screen which as mentioned then fades / deteriorates to a black screen. I had tried the Android HD Revolution rom but no difference.
One thing I did yesterday in my panic was to select 'Factory reset'. Will this have usb debugging setting?
Finally, when I connect to a pc, it doesn't see it. Is this because it's still set on charge only mode?
I'm probably my own worst enemy

If you finally press "Factory reset" you will reset USB debugging, then you can't root your phone using this tools kit. Try to reinstall the stock rom.
If you didn't root your DHD. Phone may still under warranty.

Hi Guys
I've managed to get this back up and running again.
After a lot of playing about with various file downloads last night, I finally managed to get my pc to see the phone. After that, I just downloaded a stock rom and installed it.
After this fright, I am reluctantly going to stick with this and not bother with rooting / custom roms.
Anyway, many thanks for all your responses, I really appreciate the time you took to helpo me out.
This forum absolutely rocks.

Hi,
I've just downloaded, I read the 'effen' manual and then ran ace-hack, it seems to have worked except I can't see clockwork mod recovery?
I can see superuser and ROMmanager, is it still ok to try and download and flash a custom ROM?
---------- Post added at 09:46 PM ---------- Previous post was at 09:03 PM ----------
Well to confirm my noob status I have now found that clockwork mod recovery is indeed installed (I assume you're not meant to be able to see it as an app as it sits at a lower level).
I downloaded the CM7 ROM, so have booted up into recovery mode, have wiped/formatted as instructed but when I choose the zip file from SD card it appears to start then aborts installation...help!!!!

Hi juicyp
juicyp said:
Hi,
I've just downloaded, I read the 'effen' manual and then ran ace-hack, it seems to have worked except I can't see clockwork mod recovery?
I can see superuser and ROMmanager, is it still ok to try and download and flash a custom ROM?
---------- Post added at 09:46 PM ---------- Previous post was at 09:03 PM ----------
Well to confirm my noob status I have now found that clockwork mod recovery is indeed installed (I assume you're not meant to be able to see it as an app as it sits at a lower level).
I downloaded the CM7 ROM, so have booted up into recovery mode, have wiped/formatted as instructed but when I choose the zip file from SD card it appears to start then aborts installation...help!!!!
Click to expand...
Click to collapse
Did you check the MD5 Checksum of the .zip before you copied it to your SD Card? as it might is some way have got corrupted.
Here is a link to what I always use before I copy anything to my SD Card or install on my OS System:- MD5 Check 2.1.
Take Care
TheQuest

Thanks!
I'm all sorted (I think, fingers crossed).
It was principally because of the mac unzipping (Safari preferences not checked), this was the original and prime fault.
That caused me to doubt my partitions on the SD card (google is sometimes your enemy) which I altered.
So what then happened was CM7 installed but upon reboot looped continuously on the android skateboarding screen.
I finally resorted to formatting the SD Card, reapplying the CM7 zip and the google zips and so far it looks good.
Of course I (me and me alone) has stuffed up all the user data I had on the SD card. I might try to recover some photos but stuff like contacts I can regenerate no major loss there.
Thanks for replying!!

CM7 - the experience thus far
Well its 72 hours since I took the plunge!
Initially it looked odd and felt flakey, the Market refused to download 80% of the apps I tried. I resolved this (not sure if it was the right way) by going into recovery and clearing the cache 2-3 times and eventually downloaded all of my old apps.
Some apps cause frequent force-closes, I assume because they've not been updated for Gingerbread? Thats a very minor irritant, I can easily live without these apps anyway.
Battery life hasn't noticeably altered yet but I suppose I have been constantly been tinkering, playing with settings, trying wifi (seems a little less sensitive to signals) and gauging how the radio is working - I seem to get HSPDA a lot less and resort to 3G more than I previously did?
So, done it, like it despite some minor reservations - now what, is there anything else I can do to improve the experience?
I must add one thing this has shown me - I really really know very little about what goes on under the hood. Despite 20+ years experience in CIS this is a very different world and all credit to those who have developed CM7!!

Please help if you can.. please
Hello!!
I am desperately seeking some guidance. Please.
So, I used to have a HTC Inspire 4G and in June I rooted it successfully.. then installed Cyanogenmod 7 etc.. everything worked great. I unfortunately lost the phone and because of insurance got a new one.
When I rooted the first time I used the old school method that was in the XDA forum.. ADB..etc.. but today... with the new replacement..
I downloaded Advance ace hack kit 29102011 (ahhk 29102011.zip) which after reading all the stuff I thought would be just a quicker way to get rooted. I used the same PC that I used before.
This time, unfortunately I am getting a black screen, right after the HTC splash screen shows up.. it fades to black.
I can get to the "Hboot" screen but removing the battery, then restarting by holding the power and the down vol button.
Tried Factory reset.. still fades to back
Tried Recovery .. still fades to back
The device will not be recognized on my laptop when connected to USB..
Am I stuck? Do I have any options?
I should have done what I did before.. but am at a loss right now.. will you please help me.
Please.
Thanks a million in advance for your responses.
Please help.

ravennyc said:
Hello!!
I am desperately seeking some guidance. Please.
So, I used to have a HTC Inspire 4G and in June I rooted it successfully.. then installed Cyanogenmod 7 etc.. everything worked great. I unfortunately lost the phone and because of insurance got a new one.
When I rooted the first time I used the old school method that was in the XDA forum.. ADB..etc.. but today... with the new replacement..
I downloaded Advance ace hack kit 29102011 (ahhk 29102011.zip) which after reading all the stuff I thought would be just a quicker way to get rooted. I used the same PC that I used before.
This time, unfortunately I am getting a black screen, right after the HTC splash screen shows up.. it fades to black.
I can get to the "Hboot" screen but removing the battery, then restarting by holding the power and the down vol button.
Tried Factory reset.. still fades to back
Tried Recovery .. still fades to back
The device will not be recognized on my laptop when connected to USB..
Am I stuck? Do I have any options?
I should have done what I did before.. but am at a loss right now.. will you please help me.
Please.
Thanks a million in advance for your responses.
Please help.
Click to expand...
Click to collapse
Try to run the latest RUU.

Similar Issue
Hi all,
Similar issue as the thread, during AAHK had a "file not found" issue and now, only get HTC screen fading to black. Getting into HBOOT works fine.
I do have S-OFF but;
Have tried recovery, nothing.
Any RUU nothing
ADB shows device is offline
running any other option in AAHK device offline
Any help would be greatly appreciated.
Cheers!

Screen black in HBOOT, Recovery, and won't boot

Hello, I know that there have been posts in the past to address this, but I haven't found one yet that has valid links to the files needed.
I was following the instructions in this thread, and the problem occurred when I followed the instructions linked in step 3.
Does anybody know of a location where I can get the files and good instructions for fixing this brick?

If you cant get into hboot, im afraid there isnt anything you can do, the phone is bricked. Does it vibrate or do anything att all.
There is a known issue where flashing a wrong clockworkmod recovery to the wrong screen type can leave the phone functional but without the screen working. That is probably what you were thinking of. If you didnt flash an older version of cwm right before trying to enter hboot to do the ruu, then this is not your issue.

I can get the phone to vibrate like it's turning on by holding the poer button down, but nothing else. I did not flash any new recoveries, I've been on the latest CWM for a while.

Just for anybody else who might need it, I finally found a PB31IMG.zip that works to get back to stock 2.3.4
Link

Thanks
Sent from my Incredible using XDA App

Droid Incerdible 1 vibrate when turned on but black screen
I'm new to the site and maybe this has been answered. But I have a droid incredible rooted. It will charge and the orange light will appear but when I attempt to turn on the phone it will vibrate once but the screen remains black, when connected to a computer and the power the phone on and it vibrates once the computer can detect it.
I do not have any of the files need for the phone on my sd card due to old one being lost so I know I need them, as well as the proper htc sync software. If someone could point me in the right direction that would be awesome

Boostedk said:
I'm new to the site and maybe this has been answered. But I have a droid incredible rooted. It will charge and the orange light will appear but when I attempt to turn on the phone it will vibrate once but the screen remains black, when connected to a computer and the power the phone on and it vibrates once the computer can detect it.
I do not have any of the files need for the phone on my sd card due to old one being lost so I know I need them, as well as the proper htc sync software. If someone could point me in the right direction that would be awesome
Click to expand...
Click to collapse
See the link in cmlusco's sig, above. You should be able to find all the files you need and more there.

[Q] Galaxy Nexus black screen of death

Basically, this: http://forum.xda-developers.com/showthread.php?t=1384415
No one responded to that thread because it was in the wrong forum.
I got the "Phone -- ! -- PC" screen, and was attempting to fix it before getting this black screen of death.
Galaxy Nexus GSM
Rooted, Codename ROM, don't think there is a Kernel in there
Carrier: Virgin Mobile
Edit: I won't be able to respond for a couple hours as I'm going to work. Any and all help is much appreciated.
Original post from above thread below:
Hello guys,
I have recently bought my first android phone, the Samsung Galaxy Nexus.
On the second day I decided to root it since I needed market enabler, as my local market (UAE) has literally no apps.
I rooted using the SDK tools, fastboot and superboot. Everything worked fine for 1 day.
However, the next day, the phone just died on me, and would not boot at all. It kept getting stuck on the "Google" image at startup. At that point, I could still go into the bootloader. I tried locking/unlocking the bootloader again, since that basically wipes all the date on the phone, but it still refused to load, it would get stuck at the startup animation.
After a few more attempts, it kept spam restarting every time I tried to switch it on.
At that point, I was downloading the default OEM ROM so I could reflash that onto the phone. However, I thought I could try using the superboot bat file again, and maybe that would fix the problem. BIG MISTAKE.
As soon as I ran that file, the phone COMPLETELY died. It will not start at ALL, it will not go into Bootloader, not go into Recovery mode, and not even go into Download (odin) mode.
The ONLY possible response you can get from it, is when you plug it into the PC. My PC seems to play that "detection" sound, same sound as when you plug in a USB, but it would just play that sound over and over again, as if im plugging/unplugging a device really quickly. It seems like the phone is continously restarting itself. When I connect the phone to the PC and that disconnect/reconnect sound comes up, I went into my device manager and I could see the following:
An item under "Other Devices" called "OMAP4440" keeps appearing and dissapearing all the time, with the little "!" mark next to it indicating that there is a driver error. The drivers for this phone are fully installed on this same PC, and it use to work fine before it went dead.
Now the problem is since I cant get into any mode whatsoever, its a bit hard to diagnose the phone. I know there is a "recovery" slot at the bottom of the phone that is accessible with a small pin, but I dont for the life of me know how that works or what it does. Does anybody know how to work that or what it actually does?
Any help would be appreciated! Thanks fellas.
Click to expand...
Click to collapse

What i with my little (almost nothing experience in android) would do its going to another computer with no drivers installed, would download the toolkit and install those drivers, then plug the phone and see what happen, im sure its not bricked since the computer recognice it.. I did lot of stuff with blackberry and there was a lot of ways to recover a phone like that... From here if the toolkit recognice it in any way.. Then you could try to do some of those steps.. As far as i tried doing all kind of stuff to my phone, toolkit its for much the Best Tool and way to do anything to your phone or at least for starters like me
Sent from my Galaxy Nexus using xda premium

But the computer doesn't actually recognize it. The "detection" sound it makes is for an unresponsive device. It won't charge, won't be recognized, and no matter what combo I use, it doesn't turn it.
I played dumb, called Samsung, and now I'm going to send it in. Thanks for the help though.

sometimes my screen goes blank and I have to pull the battery and everything comes back to normal

[Q] My Phone Vibrates Continuously as I hold the Power Button to Turn it on

Hello, everyone, I have a problem with my phone.
Before the problem, I was rooted without any custom roms. I have never installed any custom roms on my phone. I have always been stock, but rooted.
This morning, T Mobile pushed an updated to my phone. I did some research (not sure if I did enough) and apparently it was the UVLDE update. So I clicked it, phone restarted in 5 seconds, and restarted in clockwork mod, I believe. It was the screen that allows me to reboot along with some other options and is navigated by pressing up and down on the volume buttons.
I pressed reboot phone and the phone rebooted and worked normally throughout the day.
Now, I wake up (and I am not sure what happened, maybe I accidentally turned the phone off in my sleep) and I attempt to turn the phone on and it vibrates consecutively, on and off, and sometimes the screen blinks.
Is there any way I can fix this issue?
Thanks for your time. I performed a search, but I couldn't find the issue or I couldn't find any keywords.

Mr. Holmes said:
Hello, everyone, I have a problem with my phone.
Before the problem, I was rooted without any custom roms. I have never installed any custom roms on my phone. I have always been stock, but rooted.
This morning, T Mobile pushed an updated to my phone. I did some research (not sure if I did enough) and apparently it was the UVLDE update. So I clicked it, phone restarted in 5 seconds, and restarted in clockwork mod, I believe. It was the screen that allows me to reboot along with some other options and is navigated by pressing up and down on the volume buttons.
I pressed reboot phone and the phone rebooted and worked normally throughout the day.
Now, I wake up (and I am not sure what happened, maybe I accidentally turned the phone off in my sleep) and I attempt to turn the phone on and it vibrates consecutively, on and off, and sometimes the screen blinks.
Is there any way I can fix this issue?
Thanks for your time. I performed a search, but I couldn't find the issue or I couldn't find any keywords.
Click to expand...
Click to collapse
Maybe a brick? And questions go in the questions section for future reference.
Sent from my SGH-T989 using xda premium

Thanks. I'll remember that for the future.
I don't know if it's a brick or not. I haven't tried anything fancy yet. I'm looking for assistance before I go any further, if there is any further place to go.

Mr. Holmes said:
Thanks. I'll remember that for the future.
I don't know if it's a brick or not. I haven't tried anything fancy yet. I'm looking for assistance before I go any further, if there is any further place to go.
Click to expand...
Click to collapse
If you have clockwork mod on your phone and you can get to the clockwork mod menu, go to mounts and storage and plug your phone into your computer and click mount usb storage and copy this rom to your phone.
http://theunlockr.com/2011/11/29/how-to-unroot-the-samsung-galaxy-s-ii-t-mobile-version/
Then go to install zip from sd card and pick the one you just copied to your phone. It'll put you back on stock 2.3.5 hopefully that will work and if it does you will have to re root your device because this zip puts your phone to completely stock and removes the root. Hopefully this works for you it has for me in the past good luck.
Sent from my SGH-T989 using xda premium

Update.
I plugged it in to my computer via the USB.
Apparently, the computer can't recognize itbecause the device has malfunctioned (not sure how accurate that is), but the phone has turned on and I can use it.
I know the problem still, exists, so should I still follow your advice, JPOKeefe's, and go completely back to normal after erasing everything? I have no problem doing that to save my phone.
Modification:
Maybe the battery was just dead... which is why it's 0 % charged and it won't turn on after it was working perfectly before I slept.
If that is the case, then I am prepared to defend my intelligence! I guess it's just some paranoia from the update this morning that didn't actually go through.

Mr. Holmes said:
Update.
In plugged it in to my computer via the USB.
Apparently, the computer can't recognize itbecause the device has malfunctioned (not sure how accurate that is), but the phone has turned on and I can use it.
I know the problem still, exists, so should I still follow your advice, JPOKeefe's, and go completely back to normal after erasing everything? I have no problem doing that to save my phone.
Click to expand...
Click to collapse
Honestly you don't NEED to do it but if your phone is messing up and wont boot maybe you should go back to stock and re root when you read and learn more and feel more comfortable having a root.

Thanks for you quick replies.
I ninja edited my post, by the way. I'll give it a moment to charge and see what happens.
The phone was acting slightly stupid this morning after I attempted that update, so I guess I had to be sure it wasn't something drastic.
I have been comfortable with the root I had. If this phone bricks or blows up, then I have an excuse to get a GS3. Because, you know, I might as well. =p

Mr. Holmes said:
Thanks for you quick replies.
I ninja edited my post, by the way. I'll give it a moment to charge and see what happens.
The phone was acting slightly stupid this morning after I attempted that update, so I guess I had to be sure it wasn't something drastic.
I have been comfortable with the root I had. If this phone bricks or blows up, then I have an excuse to get a GS3. Because, you know, I might as well. =p
Click to expand...
Click to collapse
Just hit the thanks button!
And i have to wait till december for GSIII thats when my contract is up /:

Questions go in the Q&A section