Only I9000t
XXJPY_I9000UGJL2_XXJPY.zip
File Contents, .tar
PDA I9000XXJPY
PHONE I9000UGJL2
CSC I9000XXJPY
KERNEL K12C of HARCORD
Thank lgkahn
XXJPY_I9000TDOJP2_XXJPY.zip
File Contents, .tar
PDA I9000XXJPY
PHONE I9000TDOJP2
CSC I9000XXJPY
KERNEL K12C of HARCORD
Just place the file. tar PDA
without Re-patition
Original without modified firmware
Only adds to. tar
Modem I9000TDOJP2
Kernel K12c of Hardcord
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Archives for ODIN
Feel free to use your modem and csc choice
Link: PDA
PDA_I9000XXJPY_k12C.zip (171.03 MB)
Link: Modem
MODEM_I9000UGJL2_850MHZ.zip
Link: Modem
MODEM_I9000TDOJP2_850MHZ.zip
Link:Modem (Best results + better signal reception)
I9000B_JPA_JP3_JPA_JPA_850mhz.zip UPDATE.ZIP
I9000B_JPA_JP3_JPA_JPA_modem_850.zip ODIN
LINK: CSC
CSC_I9000XXJPY.zip
Firmware I9000DDJP6
India requested by ragin
Separate
Modem CSC-JP5-Firm-I9000DDJP6.zip
CSC Phone-_JP2-Firm-I9000DDJP6.zip
This allows eg. use
PDA = XXJPY
MODEM = JP2
CSC = JP5
Click to expand...
Click to collapse
More information here
http://www.grupoandroid.com/modding-galaxy-i9000/11714-i9000t-nuevo-firmware-xxjpy.html
Brilliant. Thanks. Downloading as i write this.
not really necessary you can flash full jpy and then simply usng tar extract any modem.bin from any f/w you want and flash that on top of f/w using odin..
i tested jp2 on my i9000t and much prefer the modem from il2 much better battery life.
lgkahn said:
not really necessary you can flash full jpy and then simply usng tar extract any modem.bin from any f/w you want and flash that on top of f/w using odin..
i tested jp2 on my i9000t and much prefer the modem from il2 which is il3.. much better battery life.
Click to expand...
Click to collapse
SI can be
but it is a contribution
if someone is useful either
Especially for the novice
Greetings
criskelo said:
SI can be
but it is a contribution
if someone is useful either
Especially for the novice
Greetings
Click to expand...
Click to collapse
true ........
Thanks for the post, just what I was looking for : )
Just flashed with Olin, no issues, all setting messages ect still there. I went from 2.1. Also no Telco apps or screens.
lgkahn said:
not really necessary you can flash full jpy and then simply usng tar extract any modem.bin from any f/w you want and flash that on top of f/w using odin..
i tested jp2 on my i9000t and much prefer the modem from il2 which is il3.. much better battery life.
Click to expand...
Click to collapse
its a ONE step flash for new people, of lazy people
its definitly usefull.
ps: i thought i read somewhere (in GA maybe ? ) that you had included CF-root too ? i must be tired
I just installed darkys rom over my current rom (stock telcel, america movil i9000T) with no problems whatsoever
i have now my galaxy from telcel(mexico) running full 3g (umts and hspda) on i9000xxpy modem
This makes me think the modem file itself has all frequencies which just get enabled if your hardware supports them
Sent from my GT-I9000T using XDA App
Regarding the previous comments on the modem, I wanted to say I am testing the modem I9000BVJJPA with very good results and an increase in the signal, better than I9000UGJL2 recommend giving it a try.
I9000B_JPA_JP3_JPA_JPA_850mhz.zip
Thanks for this, is nice to have a Galaxy S phone without all that bloatware from Telcel .
criskelo said:
SI can be
but it is a contribution
if someone is useful either
Especially for the novice
Greetings
Click to expand...
Click to collapse
If this can be done to all the recent & relevant ROMs for different regions, It would be a sticky material worth referring to.
PS : A lot of people from the Indian sub-continent would be happy to have DDJP6 in this form.
ragin said:
If this can be done to all the recent & relevant ROMs for different regions, It would be a sticky material worth referring to.
PS : A lot of people from the Indian sub-continent would be happy to have DDJP6 in this form.
Click to expand...
Click to collapse
If you provide me that
PDA
Phone
CSC
I can do for you
Greetings
hi criskelo,
i installed your xxjpy rom and its running fine so far. I was wondering though if it has a lag fix enabled by default. if so, is there any way do disable it?
thanks,
b3n
I only have a single file containing all.
criskelo said:
If you provide me that
PDA
Phone
CSC
I can do for you
Greetings
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
b3n_ said:
hi criskelo,
i installed your xxjpy rom and its running fine so far. I was wondering though if it has a lag fix enabled by default. if so, is there any way do disable it?
thanks,
b3n
Click to expand...
Click to collapse
This is not a custom rom
has no lag fix
Only this added modem 850mhz
for I9000T
It's a really quick firmware
which does not need lagfix
Greetings
ragin said:
I only have a single file containing all.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
and as the name of this file
where you can download
criskelo said:
and as the name of this file
where you can download
Click to expand...
Click to collapse
This is from samfirmware http://www.multiupload.com/MXTHT51QND pass = samfirmware.com
EDIT : It contains the file JP6_JP5_U_JP2.tar
EDIT2 :
HKAINU
PDA = JP6
MODEM = JP2
CSC = JP5
ragin said:
I only have a single file containing all.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Here I leave requested
Also located in the first post
Firmware I9000DDJP6
India requested by ragin
Separate
Modem CSC-JP5-Firm-I9000DDJP6.zip
CSC Phone-_JP2-Firm-I9000DDJP6.zip
This allows eg. use
PDA = XXJPY
MODEM = JP2
CSC = JP5
Click to expand...
Click to collapse
criskelo said:
Here I leave requested
Also located in the first post
Click to expand...
Click to collapse
Thanks a Lot. I will mention this to all.
ragin said:
Thanks a Lot. I will mention this to all.
Click to expand...
Click to collapse
It is a pleasure to help
Greetings
Related
I also wanna know if we can do this...
I just want the original australian (optus) CSC back... cause I flashed over it not knowing what it is. Well, at least my phone works fine, but I'm a bit scared that I could have problems in future.
shouldnt your csc be in your stock firmware?.. CSC_xxx.tar should be it unless its missing?
raspdeep said:
shouldnt your csc be in your stock firmware?.. CSC_xxx.tar should be it unless its missing?
Click to expand...
Click to collapse
Can't find our stock firmware for optus. This is our versions:
PDA: DTJF3
Phone: DTJF3
CSC: OPSJF1
I would like a backup too before flashing, any ideas how?
hernit said:
Can't find our stock firmware for optus. This is our versions:
PDA: DTJF3
Phone: DTJF3
CSC: OPSJF1
I would like a backup too before flashing, any ideas how?
Click to expand...
Click to collapse
I would also like to know how to do this.
Root + this perhaps?
Javalu said:
I would also like to know how to do this.
Root + perhaps?
Click to expand...
Click to collapse
up with this program not work
stefano_na said:
up with this program not work
Click to expand...
Click to collapse
check this out mate:
http://forum.xda-developers.com/showthread.php?t=726673&highlight=backup
edit: meh, false alarm but u can always have a look
It seems like pail found a way to do this ... He said that his next rom doesn't require a pre flash
Sent from my GT-I9000 using Tapatalk
ZSJPG (first android 2.2.1 for hong kong) is released via Kies on 24 Feb 2011
put the file on odin pda (uncheck repartition) to flash it, no pits required.
PDA/PHONE/CSC: JPG/JPG/JPG
Build date: 8 Feb 2011
download link HERE
ZSJPG modem: download HERE
may not be rooted (superuser not working) as some users reported
speedmod can still flash over it but not everyone can apply tweaks as users reported
speed like JS5, lag-free without lagfix
Cool, really want to try new radio. Can anyone make CWM flashable?
languages ?
dadyal said:
languages ?
Click to expand...
Click to collapse
English (UK), English (US), Korean, Traditional Chinese (HK), Simplified Chinese, Traditional Chinese
Hm, JPY/JS3/JS5 should be greater than JPG (in terms of version number)?! So imo it should be useless.
vinceyeung said:
ZSJPG (first android 2.2.1 for hong kong) is released via Kies.
put the file on odin pda to flash it, no pits required.
PDA/MODEM/CSC: JPG/JPG/JPG
download link
Click to expand...
Click to collapse
vinceyeung,
Thanks for sharing.
Is it rootable?
ZSJPE (previous radio from HK rom) is my choice for a really good battery life and nice reception, so really hoping for another hit with this ZSJPG.
+ built date 8th Feb (latest of all available now I guess
tzyn said:
Hm, JPY/JS3/JS5 should be greater than JPG (in terms of version number)?! So imo it should be useless.
Click to expand...
Click to collapse
tzyn,
Dated Feb 8th, 2011. For the TGY market, at least, this official I9000 ZS firmware is new.
Will give a try but i think modem only with XWJS5
howipig said:
vinceyeung,
Thanks for sharing.
Is it rootable?
Click to expand...
Click to collapse
yes, and also u can use speedmod k13c as well
can someone tell me if this one is faster than XWJS5?
where can i find only the modem file? Can somebody make a modem file to flash with Cwm
Thanks
tzyn said:
Hm, JPY/JS3/JS5 should be greater than JPG (in terms of version number)?! So imo it should be useless.
Click to expand...
Click to collapse
Perhaps for you, but not for the users in East Asia.
Sent from my GT-I9000 using XDA App
Thanks bro, I previously flash my rom to js5 (Docrom), is your flash method suitable and safe for me?
ihmcjacky said:
Thanks bro, I previously flash my rom to js5 (Docrom), is your flash method suitable and safe for me?
Click to expand...
Click to collapse
it uses 803pit as js5 do, should have no problem
I'm on js5 with 512.pit, works fine.
Sent from my GT-I9000 using XDA App
vinceyeung said:
yes, and also u can use speedmod k13c as well
Click to expand...
Click to collapse
vinceyenung,
But I keep getting NAND lock message... until I flash the kernel with your suggestion. Thanks again
I flashed my phone with ZSJPG, Ver 2.2.1
Very Very Smooth, No Lag, BenchMark=1100,1115,1125. Its better Than JPY. But same as JS5
Use Odin
Just select the PDA file, Do not check the Re-partation. Works perfectly.
Browser still have problem Squre box shows up while Zoom in & out.
Same Problem with JPY,JS3 & JS5
fail to root
failed to root with z4root, i know i can deal with it by flashing speedmod through obins, but i need to back up the stock kernel
a1030bw said:
failed to root with z4root, i know i can deal with it by flashing speedmod through obins, but i need to back up the stock kernel
Click to expand...
Click to collapse
Use sgs kernel flasher, no odin and you can backup the kernel.
Sent from my GT-I9000 using XDA App
Hi
New Euro-FW on samfirmware.com P1000XWJMK:-
http://hotfile.com/dl/111457375/883e471/P1000XWJMK.rar.html
password samfirmware.com
File Size: 205MiB
PDA: XWJMK
Modem : XXJMA
CSC: PHNJM5
ro.build.version.release=2.2
ro.build.date=2011. 02. 22. (ȭ) 11:01:46 KST
boot.bin & Sbl.bin included >>>>>>>>>>>>>>>>>>>Locked bootloader
good news! any improvements?
What he means at the end there is DO NOT USE, IT HAS A LOCKED BOOTLOADER.
Instead, use the safer versions further down the thread.
Sent from my "way better than an iPad" tab.
btyork said:
What he means at the end there is DO NOT USE, IT HAS A LOCKED BOOTLOADER.
Sent from my "way better than an iPad" tab.
Click to expand...
Click to collapse
You can exclude them easily.
- Open P1000XWJMK-REV03-ALL-CL900323.tar.md5 using PowerArchiver but without extracting any
- select both boot.bin & Sbl.bin
- delete
- close file....
- Flash with Odin
btyork said:
What he means at the end there is DO NOT USE, IT HAS A LOCKED BOOTLOADER.
Sent from my "way better than an iPad" tab.
Click to expand...
Click to collapse
means that you have to read this tread first before you try flashing another firmware.....
btyork said:
What he means at the end there is DO NOT USE, IT HAS A LOCKED BOOTLOADER.
Sent from my "way better than an iPad" tab.
Click to expand...
Click to collapse
You could use it - just don't flash the bootloaders! Use Heimdall after extracting the bits you're interested in. Personally I'd avoid it and wait for a modaco-based version with working recovery .
I wait for Roto Version
thanks
hello,
Above all thank you for the rom
I followed your instruction but I get the message in odin
md5 not valid.....
you can flash it as it is and after patch it no problem
go strong. Overcome 1.4.0 is wiating for us with JMK Rom
triplex76 said:
you can flash it as it is and after patch it no problem
Click to expand...
Click to collapse
are you sure that patch still works?
DO NOT DO THAT. Playing with locked bootloaders is almost surest way to get bricked. Either flash with heimdal or wait for a version without bootloader.
overcome - excellent rom!
skdubg said:
go strong. Overcome 1.4.0 is wiating for us with JMK Rom
Click to expand...
Click to collapse
overcome - excellent rom!
wallah said:
hello,
Above all thank you for the rom
I followed your instruction but I get the message in odin
md5 not valid.....
Click to expand...
Click to collapse
Hi Wallah,
Just omit .md5 from the extension
thanks
Galaxyer said:
Hi Wallah,
Just omit .md5 from the extension
Click to expand...
Click to collapse
thank you Galaxyer
but I will be wise and wait for the update to Overcom
Thanks a lot !!!
Where's the fun in wise? I'm gonna try and flash and have a looksee at what's new.
ah do not push me, because I have not asked twice
I am impatient but not want to brick my tab
because I use the tab to phone
wallah said:
ah do not push me, because I have not asked twice
I am impatient but not want to brick my tab
because I use the tab to phone
Click to expand...
Click to collapse
If I get it flashed, and assuming no-one beats me to it, I'll put a "safe" version up
thanks dude
thanks a lot very nice on your part
Seems that only CSC is different from JMI.. Other parts are the same..
Kobo was removed and now there is music store from samsung. And strange program called "nrcnext"..
Product Code: GT-S8530BAAXEF
Latest firmware: S8530XXKK5/S8530OXAKK5
Modified: 23.11.2011 11:42:53
Filename: GT-S8530_XEF_1_20111123114125.zip.enc2
Now I'm testing.
Later more.
Best Regards
wow thanks man.
going to the crime scene...
@SamFirmware
Firmware: S8530XXKK5_S8530OXAKK5_XEF Fast: http://hotfile.com/dl/135948390/db0620d/S8530XXKK5_S8530OXAKK5_XEF.zip.html
(Bada 2.0)
pass: samfirmware.com
S8530XXKK5:
CSC:S8530OXAKK5
http://hotfile.com/dl/135949882/8d19ae5/GT-S8530_XEF_S8530XXKK5.rar.html
Thank you very much
better, veyron faster, beuaty !! over ota works all is the best i dont change for android !!!
hope we can change keyboard color !!!
Browser fasterrrr smoothhhhh flash full screen !!!
Vocale commande work perfect i can wright call ask and its works like a charme !!!
yeah!
hey! good sammobile! how much freeram? stability? browser? and what about lenguage? is in english?
greetings, Paul
It's real !!
best ROM so far !!!
it support most common language known (don't ask for English, because it's the default).
Someone can check if it is possible to write in Hebrew in this version?
update:
I can't call, sms, and use packet data using this ROM.
downgrade to KJ1 custom until someone modded this one.
miina_tokiha said:
update:
I can't call, sms, and use packet data using this ROM.
downgrade to KJ1 custom until someone modded this one.
Click to expand...
Click to collapse
are you sure bro? i'm in indonesia too and i have been using XXKK5 and worked well with indosat operator here...
the_hoho said:
are you sure bro? i'm in indonesia too and i have been using XXKK5 and worked well with indosat operator here...
Click to expand...
Click to collapse
hmmm, that's strange.
I'll try to reflash tonight.
KK5 is now removed from FUS...like KK5 on S8500 before...
So I think soon we can get newer Version for S8530.
Best Regards
KK7 is available via FOTA for Product Code XEF
Check this out:
http://forum.xda-developers.com/showthread.php?t=1363328
Best Regards
adfree said:
KK7 is available via FOTA for Product Code XEF
Check this out:
http://forum.xda-developers.com/showthread.php?t=1363328
Best Regards
Click to expand...
Click to collapse
I dont know what about KK7 but KK8beta its faster then KK5 and more nice, wifi have nice driver
KK8? for sure? What Product-Code to use in CFD?
Setialpha said:
KK8? for sure? What Product-Code to use in CFD?
Click to expand...
Click to collapse
Sorry its KL1
Its work just for S8530XXKK5 XEF
Dont upgrade more then KL1
Never upgrade like small size file 4.8Mo but for real file like 6.8Mo...
If you are now on KKV you need to reflash to KK5 and rebegin FOTA upload then stop when you have KL1 cause there's other KLV and if you upgrade it you cant after upgrde for new version also you need to reflash from KK5 again, then stay on KL1.
Ah... OK. Will it work with S8500, too?
Setialpha said:
Ah... OK. Will it work with S8500, too?
Click to expand...
Click to collapse
Normally in 8500KK5 DBT firmware but its doesn't work for now for some one.. You can test. Not guaranteed works
And there's no KL1 for S8500 for now
S5360TAJKK3_S5360TLPKK3_S5360TAJKK3 (Austria)
this is the stock firmware for GT-S5360T from sammobile
3 files for odin
converted and uploaded by:
TheCommander
using SplitFUS2 v2.00.120425GA by Doky
link
mediafire
?8uunty5cb229ue4
Thanks for the rom mate fixed the annoying accelerometer issues I was having after flashing overseas roms.
My Telstra branded Galaxy Y is now unlocked and rooted with no issues at all.
CSC Radio for Telstra rom
I am trying to get the CSC radio for my Telstra phone as i stuffed up and flashed the wrong radio without a backup. I know "idiot!"
Dumb bump, old thread.
amigo porfa
dany730 said:
S5360TAJKK3_S5360TLPKK3_S5360TAJKK3 (Austria)
this is the stock firmware for GT-S5360T from sammobile
3 files for odin
converted and uploaded by:
TheCommander
using SplitFUS2 v2.00.120425GA by Doky
Click to expand...
Click to collapse
regalame el link de mediafare porfavor mi email es [email protected]
de colombia
Well please use english language if you are bad in or you want to use spanish then please provide the google translation
ROM EVOLUTION X3
KERNEL HELL FUSION
ALINS JB THEME + EVOLUTION S3 STATUS BAR.
The link please
Worked like a charm!
dany730 said:
S5360TAJKK3_S5360TLPKK3_S5360TAJKK3 (Austria)
this is the stock firmware for GT-S5360T from sammobile
3 files for odin
converted and uploaded by:
TheCommander
using SplitFUS2 v2.00.120425GA by Doky
Click to expand...
Click to collapse
Thank'ou so much! It worked perfectly!
I had 8Hrs all night without sleeping searching for how to fix this Phone flashed as S5360DDXXX but it's really a 5360T
Now I need to change the modem to make it goes on 3G Latam Networks 850/1900Mhz Some Idea?
Thanks again!
eli0dt7 said:
Thank'ou so much! It worked perfectly!
I had 8Hrs all night without sleeping searching for how to fix this Phone flashed as S5360DDXXX but it's really a 5360T
Now I need to change the modem to make it goes on 3G Latam Networks 850/1900Mhz Some Idea?
Thanks again!
Click to expand...
Click to collapse
I have 5360T firmware on my firmware thread but its for telstra but feel free to try it
http://forum.xda-developers.com/showthread.php?t=2568853