Garmin-Asus M10 dual booting with android Garmin-Asus A10 ROM - Upgrading, Modifying and Unlocking

M10 and A10 have such similar hardware, hopefully, the A10's ROM would be an ideal candidate for dual booting android in M10.
Anyone who has the same thoughts?
If someone could get the A10 ROM, I can try creating a kitchen and an android ROM for M10. I am no expert, but I think my linux knowledge should help.

can this help?
kindly google for software update of A10. i was not allowed to post the link.
i am new to windows mobile but i will certainly like too see android on m10.
these are my 2 cents
hope this helps.

http://www.garminasus.com/zh_TW/support/a10-updates.html

Thanks guys. The update link gave me a ext2fs file system image. Which after unpacking has 4 files:
1. 512_A10_PACKAGE.raw (probably the most iteresting part, 284MB)
2. system_version.sig
3. 512_A10_PACKAGE.raw.sig
4. system_version
I am still trying to dig and figure out what the raw file is. All comments and tips are welcome.

I hope you succeed
http://forum.xda-developers.com/showthread.php?t=455648

Really looking forward to run android on my M10, it will be super cool!

Here is a hex dump of the first few kbs of the raw file:
00000000 50 61 63 6b 61 67 65 20 6f 66 20 53 44 20 44 6f |Package of SD Do|
00000010 77 6e 6c 6f 61 64 00 ff ff ff ff ff ff ff ff ff |wnload..........|
00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
00000040 4d 6f 6e 20 4f 63 74 20 31 38 20 31 34 3a 31 39 |Mon Oct 18 14:19|
00000050 3a 30 37 20 32 30 31 30 0a 00 ff ff ff ff ff ff |:07 2010........|
00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
00000080 0a 00 00 00 b0 ed 5b 1c ff ff ff ff ff ff ff ff |......[.........|
00000090 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
000001f0 70 61 72 74 69 74 69 6f 6e 2e 6d 62 6e 00 ff ff |partition.mbn...|
00000200 ff ff ff ff ff ff ff ff 00 04 00 00 d0 01 00 00 |................|
00000210 71 63 73 62 6c 68 64 5f 63 66 67 64 61 74 61 2e |qcsblhd_cfgdata.|
00000220 6d 62 6e 00 ff ff ff ff d0 07 00 00 84 2c 00 00 |mbn..........,..|
00000230 71 63 73 62 6c 2e 6d 62 6e 00 ff ff ff ff ff ff |qcsbl.mbn.......|
00000240 ff ff ff ff ff ff ff ff 54 36 00 00 f0 df 00 00 |........T6......|
00000250 6f 65 6d 73 62 6c 2e 6d 62 6e 00 ff ff ff ff ff |oemsbl.mbn......|
00000260 ff ff ff ff ff ff ff ff 44 18 01 00 e8 b8 0e 00 |........D.......|
00000270 61 6d 73 73 2e 6d 62 6e 00 ff ff ff ff ff ff ff |amss.mbn........|
00000280 ff ff ff ff ff ff ff ff 2c d3 0f 00 28 e0 2d 01 |........,...(.-.|
00000290 61 70 70 73 62 6f 6f 74 2e 6d 62 6e 00 ff ff ff |appsboot.mbn....|
000002a0 ff ff ff ff ff ff ff ff 54 b5 3d 01 5c d9 00 00 |........T.=.\...|
000002b0 61 70 70 73 2e 6d 62 6e 00 ff ff ff ff ff ff ff |apps.mbn........|
000002c0 ff ff ff ff ff ff ff ff b0 90 3e 01 28 98 36 00 |..........>.(.6.|
000002d0 72 65 63 6f 76 65 72 79 2e 69 6d 67 00 ff ff ff |recovery.img....|
000002e0 ff ff ff ff ff ff ff ff d8 2a 75 01 00 00 42 00 |.........*u...B.|
000002f0 75 73 65 72 64 61 74 61 2e 6e 61 6e 64 69 6d 67 |userdata.nandimg|
00000300 00 ff ff ff ff ff ff ff d8 2c b7 01 80 10 00 00 |.........,......|
00000310 73 79 73 74 65 6d 5f 65 78 74 33 2e 69 6d 67 00 |system_ext3.img.|
00000320 ff ff ff ff ff ff ff ff 58 3f b7 01 00 00 00 10 |........X?......|
00000330 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
000003f0 53 69 6e 67 68 6f 6d 65 5f 4c 65 65 00 ff ff ff |Singhome_Lee....|
00000400 53 52 31 00 ff ff ff ff ff ff ff ff ff ff ff ff |SR1.............|
00000410 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
....
I see two headers. Followed by a section which may be some signature? And then a file list. The rest of the contents is possibly files. I am not sure what the number at the end of each file name means. The file name "recovery.img" got my hopes high.
Linux does not directly recognize this format. It may be custom. Will try extracting recovery.img assuming the rest of the file is somehow delimited. If someone can recognize the format, that would be great. As usual, all comments are welcome.

i think same with you
m10 may be use android
you are cool

Howabout using A50 updated Rom since M10 and A50 share the same screen size.
Link: http://www.garminasus.com/en_AU/support/nuvifone-a50-software-updates.html

hey akku good work. keep going. yaar i dont know any thing but i think u should ask guy who ported android on p 535 asus pda.
hope this helps.
dude plzzzz port android to m10. m dying for it.

Hello! The following links are useful?
http://www.godevice.com/2010/08/19/convert-your-windows-mobile-into-android-device/

Thanks for all the tips guys. Just managed to extract the following files from the update package:
system_ext3 file system image:
http://hotfile.com/dl/83156994/76dbe38/system_ext3.img.zip.html
recovery.img and the extracted components:
http://hotfile.com/dl/83167576/975a3e1/recovery.img.d.zip.html
the recovery.img package contains the extracted contents as well, thanks to split_booting.pl posted on the other forum.
Did not bother extracting the other files in the update package. Not sure if they are important.
Disclaimer: There was no licence when I downloaded the original file. I own an M10 and so I hope I have the right to do whatever I am doing. You are responsible to check your own license rights.
Trying to put these together with haret next.

Great man,
Please, continue working on this. I think a lot of people will be very grateful if you succeed.
If you need any support or donation to continue, just say.

Cool~~
Could you find the following files in recovery.img??
another doc says..if you can find zImage, at least you can boot into linux command line mode.
-rootfs.img
-system.ext2 (system_ext3??)
-zImage

multi888 said:
Howabout using A50 updated Rom since M10 and A50 share the same screen size.
Click to expand...
Click to collapse
Its bed idea. M10s screen has size 800x480 but screen on A50 has size 480x320 and A50s screen supports multitouch. So, I don't think that A50 image is sutable for M10.
aaaku
Keep going!
Have you tried to boot image on M10? And could you please share with us your progress. I mean, what have you done and what is to be done.

Guys, my current attempts are to
1. pick up one of the htc dual boot android roms
2. Replace the fs, kernel and initrd
3. try to boot.
Haret always crashes with some unknown exception. If I know linux, screen size shouldn't be a big issue. There should be params to change this. The reason for picking up A10 rom is the processor match and the rest of device driver compatibility. Please let me know if anyone thinks otherwise.
Feel free to cook things yourself too. As I said, I am no android or mobile expert. I just know some linux. If you want me to extract something from a different update file, I can do that.
Does anyone know how to extract anything from an update exe. Is it some kind of self extracting zip ?

Dear aaaku,
What tools do you use to extract files from 512_A10_PACKAGE.raw? Could you explain this part?? Thanks~

After reserched some documents, i think the problem is haret itself. Haret don't seem to support MSN7227 cpu, so it misrecognize msm7227 as an ARMv6 cpu.
Here are some relative posts..
http://forum.xda-developers.com/showthread.php?p=7834782
http://lists.linuxtogo.org/pipermail/haret-devel/2010-February/000006.html

Was there any luck in porting android to M10? I am interested in it.

sad to know that ... even htc hd mini has no android 4 it.... m10 n htc mini share same processor... too bad to hear that....
i suggest lets put up a bounty to develop a haret for both phones... any one in?

Related

impossible to change pagepool ipaq rx1950

Hi,
I really dont know if i have posted in the right place!...
I bought a stock of rx1950 for my work-team but i need to run on it an application that needs more page file,,,luckily i saw your post but i have a problem: after the 'FF FF FF FF FF FF FF FF 9B 4F FF FF 64 B0 00 00 64 00 00' in my rom file cant file the 00 C0 or 00 08 or something else...please would you help me telling me how to edit that rom?
if you need the rom you can find it here:
http://h20000.www2.hp.com/bizsuppor...8135&swEnvOid=2067&swLang=8&taskId=135&mode=3
and of course i am giving you the piece that i need:
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
really really thanks a lot!
whops i suppose that you didnt understand anything...
it was referred to the post http://forum.xda-developers.com/showthread.php?t=276630
i was wondering if anyone could tell me how to apply it to ipaq rx1950

Need Help Asus P320

In 850_gax_sd.bin (ENG 4.15 version)
address 0x038C118F
30 34 30 34 00 FF FF FF FF FF FF FF 31 39 C7 63
control for GSM.BIN but this not CRC32, Adler32 or CHECKSUM(32)
What is this ??????

OBEX and other Transfer Protocol

It seems Kies use OBEX...
AT+SYNCML=MOBEXSTART
First time I saw OBEX was in Brew Mobile Commander in 2006.
Also there was an Plugin for Total Commander...
But this seems not work with S8500.
Other used Protocol is TFS... Samsungs Test Commands. For instance in TkFileExplorer_2.2.exe used.
Hmmm. I need more info/practice about OBEX...
Best Regards
TFS - I saw references to that on the boot loader stuff that was decrypted elsewhere on this forum... Tiny File System, Transparent File System.....?????
New year... old questions.
In Kies you can find several OBEX Commands... like:
m-obex/system/memory
m-obex/application/count
apps_c...
m-obex/fs/info
m-obex/fs/mem_size
In bada 2.0 it seems removed obex... replaced by other stuff...
Anyway. For learning I wish I could use obex Commands successfully.
At the moment no idea how.
Maybe someone could help me.
Best Regards
Edit 1.
Found something via Google...
http://wammu.eu/docs/manual/protocol/m-obex.html
But I sent on XXJL2 AT Command, but can't see any results...
AT+SYNCML=MOBEXSTART
For instance I use WinComm...
AT Commands work on my Port 5...
But if I send this:
AT+SYNCML=MOBEXSTART
AT Commands not more work on COM 5...
Also I get no answer for obex Commands like this:
m-obex/application/count
Is obex open new port?
Or if I sent on 5 I should receive on COM 5 ?
Again many Questions.
Thanx for reading.
Best Regards
todo: implement it in bterm
Code:
Request: AT
41 54 0D 0A
Answer: AT OK
41 54 0D 0D 0A 4F 4B 0D 0A
Request: ATZ
41 54 5A 0D 0A
Answer: ATZ OK
41 54 5A 0D 0D 0A 4F 4B 0D 0A
Request: AT+SYNCML=MOBEXSTART
41 54 2B 53 59 4E 43 4D 4C 3D 4D 4F 42 45 58 53 54 41 52 54 0D 0A
Answer: AT+SYNCML=MOBEXSTART OK
41 54 2B 53 59 4E 43 4D 4C 3D 4D 4F 42 45 58 53 54 41 52 54 0D 4F 4B 0D 0A
Request:
80 00 0F 11 00 20 00 46 00 08 4D 4F 42 45 58
Answer:
A0 00 14 10 00 20 00 CB 00 00 00 01 4A 00 08 4D 4F 42 45 58
#########################################
# Additional command goes here...
#########################################
Request:
81 00 03
Answer:
A0 00 03
Request: ATZ
41 54 5A 0D 0A
Answer: ATZ OK
41 54 5A 0D 0D 0A 4F 4B 0D 0A
commands examples
Code:
Request: m-obex/connection_packet
82 00 23 CB 00 00 00 01 42 00 1B 6D 2D 6F 62 65 78 2F 63 6F 6E 6E 65 63 74 69 6F 6E 5F 70 61 63 6B 65 74
Answer:
A0 00 03
Request: m-obex/security/privacylock
83 00 27 CB 00 00 00 00 42 00 1F 6D 2D 6F 62 65 78 2F 73 65 63 75 72 69 74 79 2F 70 72 69 76 61 63 79 6C 6F 63 6B 00
Answer:
A0 00 12 C3 00 00 00 02 4C 00 05 00 00 49 00 05 00 00
Request: m-obex/fs/privacy_lock
83 00 22 CB 00 00 00 00 42 00 1A 6D 2D 6F 62 65 78 2F 66 73 2F 70 72 69 76 61 63 79 5F 6C 6F 63 6B 00
Answer:
A0 00 0D C3 00 00 00 02 49 00 05 4E 4F *
Request: m-obex/application/count
83 00 27 CB 00 00 00 00 42 00 1C 6D 2D 6F 62 65 78 2F 61 70 70 6C 69 63 61 74 69 6F 6E 2F 63 6F 75 6E 74 00 4C 00 03
Answer:
A0 00 14 C3 00 00 00 04 4C 00 05 00 00 49 00 07 2C 00 00 00
Request: m-obex/system/imsi
83 00 21 CB 00 00 00 00 42 00 16 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 69 6D 73 69 00 4C 00 03
Answer: IMSI ;)
A0 00 1F C3 00 00 00 0F 4C 00 05 00 00 49 00 12 .......
Request: ƒm-obex/system/mnc
83 00 20 CB 00 00 00 00 42 00 15 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 6D 6E 63 00 4C 00 03
Answer: 02
A0 00 12 C3 00 00 00 02 4C 00 05 00 00 49 00 05 30 32
Request: ƒm-obex/system/csc
83 00 20 CB 00 00 00 00 42 00 15 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 63 73 63 00 4C 00 03
Answer: S8500OXAJID
A0 00 1B C3 00 00 00 0B 4C 00 05 00 00 49 00 0E 53 38 35 30 30 4F 58 41 4A 49 44
Request: m-obex/system/openapiversion
83 00 2B CB 00 00 00 00 42 00 20 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 6F 70 65 6E 61 70 69 76 65 72 73 69 6F 6E 00 4C 00 03
Answer: 1.2.0_1009152352_LIS_S8500XXJID_XEO
A0 00 33 C3 00 00 00 23 4C 00 05 00 00 49 00 26 31 2E 32 2E 30 5F 31 30 30 39 31 35 32 33 35 32 5F 4C 49 53 5F 53 38 35 30 30 58 58 4A 49 44 5F 58 45 4F
Request: m-obex/application/getinstallsetting
83 00 33 CB 00 00 00 00 42 00 28 6D 2D 6F 62 65 78 2F 61 70 70 6C 69 63 61 74 69 6F 6E 2F 67 65 74 69 6E 73 74 61 6C 6C 73 65 74 74 69 6E 67 00 4C 00 03
Answer:
A0 00 14 C3 00 00 00 04 4C 00 05 00 00 49 00 07 01 00 00 00
---------- Post added at 06:31 PM ---------- Previous post was at 06:29 PM ----------
PS. tested on bada 2.0
Thank you very much.
I got it now.
Tested on bada 1.x
Older then XXJL2 seems to have other syntax...
But I can confirm work also on XXKL6.
Wow. Every little mistake have lead to no further connection...
Best Regards
Oh "surprise"...
Again obelix power...
m-obex/system/restore/start
.
.
See here:
http://forum.xda-developers.com/showpost.php?p=21541765&postcount=4
Best Regards

adb is the only thing not working, bricked??

My problem ; no adb connection in booted OS nor in recovery .
everything else works fine; sdcard, bluetooth , mounting sd on PC all ok.
my handset : pvt4, oxygen Hboot, S-off
I allready tried "fastboot oem eraseconfig"
but stil no adb connection possible..
before I do anything stupid I want to make sure if I have the usb-brick
cause it seems I haven't apart from the not working adb.
I can adb with my other pvt3 desire so my pc setup is ok.
Is it possible to have usb brick whilst everything else apart from adb is working fine?
Is there something that can be checked? I have uploaded my misc.img
for the specialists amongst us to see if its ok or not
Hope anyone can shed some light on this.
ps similar post of me in usb brick thread in developer section but I thought
I had more chance on an answer here.
grtz lanbase
well you dont have USB brick
what happens when you do adb devices ?
also make sure your ADB is installed properly (try reinstalling?) and maybe try with diffrent ROM ?
hi,
just edit your misc img =>
00000000:48 54 43 5f 5f 33 30 34 00 ff ff ff ff ff ff ff HTC__304.ÿÿÿÿÿÿÿ
00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020:44 65 76 69 63 65 57 61 72 6d 42 6f 6f 74 00 ff DeviceWarmBoot.ÿ
00000030:ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00000040:ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00000050:43 45 20 53 65 72 69 61 6c 20 49 6e 55 73 65 00 CE Serial InUse.
00000060:44 65 62 75 67 20 43 61 62 6c 65 20 45 6e 61 00 Debug Cable Ena.
00000070:43 45 20 20 20 55 53 42 20 20 49 6e 55 73 65 00 CE USB InUse.
00000080:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000090:43 6c 65 61 72 41 75 74 6f 49 6d 61 67 65 20 00 ClearAutoImage .
000000a0:32 2e 32 39 2e 34 30 35 2e 32 00 00 00 00 00 2.29.405.2.....
so to my point of veiw your file is right (see first line)
compare to mine it s all right (mine is HTC_204)
i won't say it s usb brick, when plug did you look at device manager??
know that your comp is fine but maybe the also right just sof issue.
just to be sure
hoe tis help
dzumagos said:
what happens when you do adb devices?
Click to expand...
Click to collapse
You should a serial number followed by "device" - this confirms your PC is recognizing your device.
thanx dzumagos for confirming my misc.img is ok, that's what I thought; no usb brick, then why the hell is adb not working on this device and working fine on my other one???
adb devices command doesn't
give me anything.
I have 2 desires, one of them is ok and gives me the serial as it should.
the one with non working adb just returns with command promt.
Sent from my HTC Desire using Tapatalk
hi,
i won't say it s usb brick, when plug did you look at device manager??
know that your comp is fine but maybe the also right just sof issue.
just to be sure
Click to expand...
Click to collapse
Thanx mate, for making me look at device manager when I plug in the phone. I noticed "adb with an exclamation mark" when plugging in my pvt4 and "android adb interface" when plugging in my pvt3
in device manager.
I reinstalled the adb driver with the pvt4 plugged in and now both devices have working adb!!! who would have thought that adb driver was corrupted somehow and able to recognize one phone and not the other....
Anyhow problem solved! thanx guys!
Sent from my HTC Desire using Tapatalk

Enter S8600 store with your Wave 1 or 2...

Any idea how Kies identify model? It seems not via AT Commands...
Or I am dumb...
AT+DEVCONINFO
I have used portmon to sniff communication...
Maybe it is the name, what Explorer shows?...
So the mass thingie USB driver...
How for instance S8600 answers in Explorer?
Best Regards
May be it?
http://forum.xda-developers.com/showpost.php?p=11286021&postcount=78
amss.bin I have checked... maybe not.
I have tried MANY combinations... maybe I have something not seen.
Maybe much easier.
Little example how bada Version is checked... Attention, high protection...
extreme hardcoded to prevent change...
2 parts needed...
Part 1:
SystemFS\User\OspSys\registry\buildnumber.ini
Part 2:
SystemFS/User/OspSys/registry/systeminfo.ini
Compare with latest Firmware and you know how to prepare your bada 1.x device for bada 3.0 Apps.
Anyway, I'm blind to manage Kies to work as S8600...
Best Regards
Okay, I've found Original Screenshot of S8600...
But I know where this Text String is stored...
But I can remember, I've tried this... and was not enough...
Maybe I'll try again.
Best Regards
It can be usb device description string in USB driver on phone or PC side (if it's PC side, description is paired with certain PID and VID), try to connect phone to linux in kies mode and use lsusb -a (aint sure if it's -a, anyway the thing is to get verbose info about device)
Hi, I think stune reads the same data that the kies when connected to the terminal.
I mean:
STUNE when you start telling us the firmware version terminal model of our product code, even our imei
Not fully correct
There is something in the PC driver that needs to be changed
You can see this in the driver details
Best Regards
Maybe Kies via Wi-Fi easier...
Not tested yet.
Best Regards
Bus reported device description is sent from device during USB enumeration. So model id is stored in Bada USB module. I'm nearly sure it's unicode string.
Maybe my fault...
AT+PROF="Device
Leads to file device.xml...
Will compare Wave 1, 2, 3 device.xml ...
Best Regards
Edit 1...
Code:
<ModelName value="GT-S8500"/>
<BaseModelName value="GT-S8500"/>
<ProjectName value="Lismore"/>
<FriendlyName value="Lismore"/>
<ProductLineup value="HHP"/>
Code:
<ModelName value="Wave 3"/>
<BaseModelName value="GT-S7250"/>
<ProjectName value="Wave3"/>
<FriendlyName value="Wave3"/>
<ProductLineup value="HHP"/>
Kies now shows other Error
Please, maybe someone can post from S8600 under Explorer...
Remember to remove IMEI...
I think this is MTP device... USB blabla portable Device Driver under Device Manager in Windows...
PS...
Text Samsung... in white Background is editable...
Edit 1.
Hmmm... Wave 2 can't edit ... grey colored...
Screenshot from S8600 would be nice.
Thanx in advance.
why do you think AT+DEVCONINFO is wrong? whole infos including imei in one packet
http://forum.xda-developers.com/showpost.php?p=20497198&postcount=15
Because I've found all files and positions to make 1:1 clone... including IMEI...
But this is not working for Kies.
Kies shows Error, that unsupported device is attached.
Best Regards
error it is kind of progress
what about these ones
Code:
Request: m-obex/connection_packet
82 00 23 CB 00 00 00 01 42 00 1B 6D 2D 6F 62 65 78 2F 63 6F 6E 6E 65 63 74 69 6F 6E 5F 70 61 63 6B 65 74
Answer:
A0 00 03
Request: m-obex/security/privacylock
83 00 27 CB 00 00 00 00 42 00 1F 6D 2D 6F 62 65 78 2F 73 65 63 75 72 69 74 79 2F 70 72 69 76 61 63 79 6C 6F 63 6B 00
Answer:
A0 00 12 C3 00 00 00 02 4C 00 05 00 00 49 00 05 00 00
Request: m-obex/fs/privacy_lock
83 00 22 CB 00 00 00 00 42 00 1A 6D 2D 6F 62 65 78 2F 66 73 2F 70 72 69 76 61 63 79 5F 6C 6F 63 6B 00
Answer:
A0 00 0D C3 00 00 00 02 49 00 05 4E 4F *
Request: m-obex/application/count
83 00 27 CB 00 00 00 00 42 00 1C 6D 2D 6F 62 65 78 2F 61 70 70 6C 69 63 61 74 69 6F 6E 2F 63 6F 75 6E 74 00 4C 00 03
Answer:
A0 00 14 C3 00 00 00 04 4C 00 05 00 00 49 00 07 2C 00 00 00
Request: m-obex/system/imsi
83 00 21 CB 00 00 00 00 42 00 16 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 69 6D 73 69 00 4C 00 03
Answer: IMSI ;)
A0 00 1F .....
Request: ƒm-obex/system/mnc
83 00 20 CB 00 00 00 00 42 00 15 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 6D 6E 63 00 4C 00 03
Answer: 02
A0 00 12 C3 00 00 00 02 4C 00 05 00 00 49 00 05 30 32
Request: ƒm-obex/system/csc
83 00 20 CB 00 00 00 00 42 00 15 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 63 73 63 00 4C 00 03
Answer: S8500OXAJID
A0 00 1B C3 00 00 00 0B 4C 00 05 00 00 49 00 0E 53 38 35 30 30 4F 58 41 4A 49 44
Request: m-obex/system/openapiversion
83 00 2B CB 00 00 00 00 42 00 20 6D 2D 6F 62 65 78 2F 73 79 73 74 65 6D 2F 6F 70 65 6E 61 70 69 76 65 72 73 69 6F 6E 00 4C 00 03
Answer: 1.2.0_1009152352_LIS_S8500XXJID_XEO
A0 00 33 C3 00 00 00 23 4C 00 05 00 00 49 00 26 31 2E 32 2E 30 5F 31 30 30 39 31 35 32 33 35 32 5F 4C 49 53 5F 53 38 35 30 30 58 58 4A 49 44 5F 58 45 4F
Request: m-obex/application/getinstallsetting
83 00 33 CB 00 00 00 00 42 00 28 6D 2D 6F 62 65 78 2F 61 70 70 6C 69 63 61 74 69 6F 6E 2F 67 65 74 69 6E 73 74 61 6C 6C 73 65 74 74 69 6E 67 00 4C 00 03
Answer:
A0 00 14 C3 00 00 00 04 4C 00 05 00 00 49 00 07 01 00 00 00
m-obex/system/csc and
m-obex/system/openapiversion ?
Thank you.
m-obex I have no success because also not enough knowledge.
See here:
http://forum.xda-developers.com/showpost.php?p=20954943&postcount=3
Best Regards
I've somewhere correct sequence to start obex on wave. I will post later
Good afternoon if it will not for anything in this case but I found this on apps_compressed:
x40BF86FF 'kDHd:! eNULL: @ STRENGTH'
0x40BF8765 'eNULL:! ANULL: @ STRENGTH'
0x40BF8784:'/../ cx / source / Xsupplicant / src / auth_methods / eapfast / eapfast.c '
0x40BF889C:'/../ cx / source / Xsupplicant / src / auth_methods / eapfast / eapfast_key.c '
0x40BFAE8C '/ www.openssl.org / support / faq.html'
0x40BFB506: '23456789ABCDEF '
0x40BFC610 '] VOHyrkd'
0x40BFD099: '56789.: AbcdefABCDEF '
ferrloz said:
Good afternoon if it will not for anything in this case but I found this on apps_compressed:
x40BF86FF 'kDHd:! eNULL: @ STRENGTH'
0x40BF8765 'eNULL:! ANULL: @ STRENGTH'
0x40BF8784:'/../ cx / source / Xsupplicant / src / auth_methods / eapfast / eapfast.c '
0x40BF889C:'/../ cx / source / Xsupplicant / src / auth_methods / eapfast / eapfast_key.c '
0x40BFAE8C '/ www.openssl.org / support / faq.html'
0x40BFB506: '23456789ABCDEF '
0x40BFC610 '] VOHyrkd'
0x40BFD099: '56789.: AbcdefABCDEF '
Click to expand...
Click to collapse
Umm, sorry, it's not helping anything in that case. FYI there are literally tenths of thousands such char strings in apps_compressed. Good you're looking tho. ;P
Maybe my goal is not clear enough...
Most of us have NO S8600...
But S8600 has few nice NEW Apps.
You can download without attached handset EVERY App you can find via Kies.
BUT not install if attached handset is not valid...
My goal is to make S8500 valid to install S8600 Apps via Kies.
Solution 1 is wait...
Maybe Samsung will offer these Apps like Tintin before Christmas 2012...
Really realistic...
I think minimum 2-3 months not available for S8500/S8530 to be exclusive for S8600...
Solution...
Move your bu ehm brain.
This mission is NOT impossible.
Best Regards
Sorry for them to lose the time, now I will focus more on the subject.
ferrloz thanks.

Categories

Resources