hi i just recently bought a galaxy note 2 phablet, im very happy with it every thing works perfectly fine, however i did come across a slight problem which is bugging me alot, as i loaded the phone up it shows you all the tutorials and stuff, for panning and zooming in using motion control.... i did not realise the problem before as i was really happy to just get the phone after so long, My motion sensor and gyroscope functions are not working
i have tried everything from factory reset to restarting , taking the battery out and putting it back in, has anyone stumbled upon this problem, and is there a solution to this problem, whether this is a software glitch/problem or a hardware issue. if anyone can help me please and thanks in advance
*#0*# check there if they are working.
Sent from my GT-N7100 using xda premium
mariosraptor said:
*#0*# check there if they are working.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
hi thank you for the quick reply, i had a look at what you asked me to do and i did manage to find all the settings, however it looks to me everything is working apart from the light sensor one, all the other settings came up as a PASS apart from the light sensor which came as level 0, which i dont know what that means, while i was on the sensor screen i swiped my hand across the sensor and the screen shifted colour from white to yellow, which is a good indication that it is working , however i went back on the operating system and tried the palm swipe and it did not work, niether did the quick glance, and the pan to zoom features are not working either, i did test the gyrocope settings and it came out as a PASS too, could you explain maybe why this may be happening and what does the level 0 on the light sensor option means, please and thank you , i really do appreciate it.
Lavel 0 says to all phones I have tried including mine. As long as the LUX changes it is working.
Now for your primary problem try to recalibrate gyroscope.
Do it by going settings-motion-advanced settings-gyroscope calibration.
If that does not help try clearing cache in recovery.
If that does not help then backup and try reflashing your rom.
Sent from my GT-N7100 using xda premium
darkgallion said:
hi i just recently bought a galaxy note 2 phablet, im very happy with it every thing works perfectly fine, however i did come across a slight problem which is bugging me alot, as i loaded the phone up it shows you all the tutorials and stuff, for panning and zooming in using motion control.... i did not realise the problem before as i was really happy to just get the phone after so long, My motion sensor and gyroscope functions are not working
i have tried everything from factory reset to restarting , taking the battery out and putting it back in, has anyone stumbled upon this problem, and is there a solution to this problem, whether this is a software glitch/problem or a hardware issue. if anyone can help me please and thanks in advance
Click to expand...
Click to collapse
Hello in response to your issues with the motion sensor. Have you installed a screen protector on your note 2? i noticed that after installing the screen protector on my Note 2 some of the motion actions did not work properly. So if you do have one on remove it and see if that corrects the issue. :good:
Useful help.
This was a very Useful thread, thanks. I've done the tests and came up vitha a fail when i tried my motion sensor. Is it likely to be broken? I'm going to reset to factory settings and pull of my screenprotector and se what happens before i do anything else. Is there anyone out there who has replaced the motion sensor? Is it soldered to the main board? Hard to replace?
Thanks beforehand. Tommie.
i thnk my sensor is nt wrkin... when i do the test, d color is alredy green nd isnt changin nd is vibratin continuosly?? is it broken or somthng lyk dat??
note 2 sensor help
mariosraptor said:
*#0*# check there if they are working.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
can't get quick glance to work
*#06*# does nothing on my note 2 why? Sensor not working was but stopped for some reason?:crying:
Samsung Galaxy Note 2 Motion Sensor and Gyroscope not working
hi my samsung note 2 was working well for last 2 years bur recenrtly its motion sensor has stopped working.
i have checked all settings, it isnt working at all..
gyroscope and motionsensor tests are fail on checking. please help me, what to do?
I have had the exact same issue. The only way to fix it is to get the whole motherboard replaced. I went into Samsung store and they said that. Issue here is that it costs £145 to replace the main board. The sensors are on the main board itself and that is why it costs a lot to fix. I've been using my Note 2 with no gyroscope for a few months now, going to buy a new phone. Rather buy a brand new phone than get it fixed
just loosen the screw nearest to the microsd card. motion sensor is under it. it work on my phone.
gyroscope sensor
Hi,
my gyroscope is burned and i buy it and now i opened my phone and i don't know how to replace it. Any help is welcome...
haakhan said:
just loosen the screw nearest to the microsd card. motion sensor is under it. it work on my phone.
Click to expand...
Click to collapse
Yeahhh!!!
You are a Hero! I tried nearly everythink since January 2016! I took the screw out, shut down my phone, put it into download mode and pull the battery out.
Im not shure if a restart would do it alone, i did all to be shure. And it now works again. My srew was magnetized! Maybe that was the reason or the chip has
a loosen contact.
Up to now it works great! I thought my sensor was dead.
Hey folks. I've searched in xda and other forums (including mighty google), but none of the answers resolved my problem.
I've had 4.2 camera and photosphere was working perfectly fine Time had passed and I decided to use it again.
Problem is that I cant align blue dot in Landscape mode as well as portrait. I have to chase the blue dot and when I finally get it, screen starts to flicker and nothing happens. I have tried on 2 different ROMs and yes I did factory reset.
I found some folks saying that If you put your phone on a flat surface for few seconds it will resolve the issue, but it didnt work for me.
I'm gonna be traveling overseas and would love to capture my trip experience with photosphere. Any ideas how to resolve this? I dont think its a gyroscope issue (hardware).
Thanks in advance.
Bump!
Attached video. Can someone suggest of a possible fix? I've tried 2 TW ROMs +1 CM10.1 ROM, same issue.
Hi!
In my Galaxy Nexus, a line of pixels on the top of the screen isn't normal.
http://i.imgur.com/sd9WGXJ.png
Just see by yourselves... The line at the top of the sreen (left side when landscape mode) isn't coloured normally. Is it a screen issue or software issue? I am using coloured softkeys that I modded with metamorph but I've never noticed this problem for 3 months of softkeys modification, just now...
If it is a hardware problem I'll send it do warranty, but I need to be sure that is worth of it
Seems like a hardware problem. The app you asked about doesn't seem like it'll fix it, but worth giving it a shot.
no it doesn't fix... what kind of "pixel disease" it is?
warranty covers that?
http://forum.xda-developers.com/showthread.php?t=1394358
Thanks, I've posted my problem there also
First of all thanks for such awesome work on this Rom. I am facing a weird issue and I didn't find anything in the thread...
When I am charging the phone basically the screen stop responding, if I touch an area on the screen, the response is like if I touched somewhere else and even the browser starts by itself.
Have anyone faced this issue? Could it be a firmware problem? I'm s-off and I have flashed the firmware myself.
Cheers.
more info
Hi all,
Just a bit more information on this issue. I have noticed that the screen start behaving weird only when I'm using the HTC dot case. If I use the phone without the case while charging everything is just fine.
Is anybody able to help on this? Maybe the magnet sensor is having a conflict while charging?
Thanks a lot.
All of a sudden after charging my phone the top part of the screen is not working. Has anyone else experienced this problem and is there a work around. Please help cz it's really annoying
it seems to be an issue with the digitizer i had the same problem i had to replace the whole screen and you can use the line drawing test in the hardware diagnostics section under the htc guide app