Related
Hi,
I f i have an existing contact , and i get a call from him but from a new phone number.
How can i add his new number from the phone list to the existing contact.
Ron
Hi Ron!
If you go into your Call History list and then find the number you want, with your stylus press and hold on the number, it will then give you a drop down menu. The top one Save to Contacts will get you to the contact to save it.
I hope this helps, StayLucky Jim :wink:
Jim,
i want to add it to existing contact ,
The only opsion that i get is to create a new contact with the phone number.
Ron
Yeah, it's a pain unless you buy one of the phone replacement softwares out there (like phoneplus) that let's you copy the number to the clipboard.
I just do create contact, then copy the number, delete the (almost) blank contact, open up the one I want and paste it in. It's sounds long winded but, in reality, only takes a few seconds. Still more than it should though!
I would recommend getting something like phoneplus if you use it as a phone quite a bit. As a dedicated phone, the XDA's are a bit weak (but, as I rarely use it as a phone, that's not something that bothers me).
Thank .I using the phonePlus,
I though there might be a better solution.
is it so difficult to build a small applicaion or registry entry etc to add a contact to an existing one???
developers???? gurus???????
Had this problem with my hero as well.
How do you take a number down if you are on a call?
ie if on a call asking for a number from the other person how do you write it down and use it for next call?
On nokias, the number you input stays after you hang up, so you can call, save etc.. But on Android, when you hang up the number you input disappears too!
AM i missing a way to do it (short of saving it to contacts (which i might not want to do), or dialling and hanging up)?
you can tap the number you enter which will dial the number you entered followed by immediately ending the call which will store it in your call history and return you to the original call all in about 2 secs. Not exactly elegant but works.
thats pretty much what i do, but its so silly to do it that way I thought ther MUST be a better way. I mean its not exactly a rare or unusual feature to need, is it? ;-)
I normally use a pen......Have done for a while now and it never fails
This applies to the stock dialer - don't know if it works like this on Sense.
Press Add Call, enter the digits. Now long-press the entered number. Select cut or copy. Then back button to cancel Add Call. After the call is over you can paste it back into the dialer the same way or into a contact.
Just tried, didnt work, no long press, any press just dials the number...
Now you've reminded me of another question:
The software usuuuaaaallly recognises number formats in emails or texts, and hyperlinks them to the dialer. HOWEVER Ive never been able to PASTE a number (copied from somehwere that the software didnt recognise as a number) into the sense dialer. Anyone can confirm this is not possible?
I'm unable to paste too on FroYo.
Sent from my HTC Desire using XDA App
Ah, well it was worth a shot. I haven't spent more than a few minutes on a Sense phone so I'm not so well-acquainted with how the dialer works. I can confirm that the stock dialer of both Milestone's Eclair and N1's Froyo has an editable text field, in which one can long-press to get the "Edit Text" popup.
Can a Sense Android use an alternate dialer app?
there are thousands of notes apps thats what there for lol i think even htc has a notes widget for sence (i cant remember) neway yeah use your apps
There is an app which specifically does what you want. It's called Number Saver and it shows up in the notification bar whenever you make a call.
cool, will check it out!
Always weird that someone has to come up with an app for some function that should have been there to begin with, oh well!
I'm not at the same place as the phone so bear with me. How do you add a contact in ec05. I could figure it out in seconds if i had the phone in my hand so i'm operating blind. The obvious of go to contact program them hit menu key then add contact, she says there's no option to add contact. She's used to di18 way of doing things. Did it change?
herbthehammer said:
I'm not at the same place as the phone so bear with me. How do you add a contact in ec05. I could figure it out in seconds if i had the phone in my hand so i'm operating blind. The obvious of go to contact program them hit menu key then add contact, she says there's no option to add contact. She's used to di18 way of doing things. Did it change?
Click to expand...
Click to collapse
May have to re-sync her accounts. I saw someone else post that after the update they had to re-login to their Google account.
Already been done.
When you placing a call you can save it right before you hit call
also after call is ask do you want to add as contact
or go to call log press on that number dialed and at the bottom it ask "add to contact"
All she has to do is go to contacts, and next to the search there is a + button. Tell her to press this and that's how to add a contact.
Sent from my SPH-D700 using XDA App
Yeah, she finally figured it out. Kinda wierd for it to not be like the old one of go to dialer and enter phone number. Right above that it says + add contact. I will have to look at it later but she said you can't bring up contacts program then menu key then add contact. That makes no logical sense to me.
The plus sign mentioned above is one way but also on mine with EC05 I pull up the dialer and enter a number and directly below the number just entered is a bar that says "add to contacts"
Hello,
I been searching to figure out how to add a pause between phone number and conference ID/extension. I've tried adding a comma (,), "p", and period (.) without success. Tried by adding this to a contact's phone number - such as 555-555-1234pp123456# or 555-555-1234,,123456#, etc.
Does anyone know of a solution? Is this a limitation in Windows Phone in general or is this OEM specific?
Thanks for your help.
Add the contact using Windows Live, Outlook, or however else you can add commas and still have it sync, then it works.
ie:
mobile phone
(800) 555-8355 ,2548
Add more commas if needed.
Is there anyway to add pause to voicemail number ? i hate entering the password everytime ..
trueblog said:
Is there anyway to add pause to voicemail number ? i hate entering the password everytime ..
Click to expand...
Click to collapse
Before you do this, read the Last Paragraph.
1. Go into your settings and then Phone Settings and write down your Voicemail number. Be sure to copy it exactly, including spaces.
2. Open Office on your phone and start a new Word Document. Type your Voicemail number exactly as you saw it.
3. Add a p after the number and then type your password. Now, highlight and copy this new number.
4. Go back to your phone settings and paste this new number including the p and password.
5. Back out and see if that worked. If you have any trouble, put the old number back into phone settings.
I'll change numbers so you don't have mine, but here's an example:
+1 (415) 497-1234p1234
This works on ATT. We also have an option to bypass password completely within the Voicemail settings menu after calling voicemail. On ATT it's option 2, then passwords, then turn off password.
Hey what i did was just type the number in a text editor and pasted to contact detail.. it worked
Hi all, just a strange issue I am having I hope you can help me. I noticed when dialing by name when new, this phone kept wanting to bring up the home number when I want to dial the mobile by default. So, I headed into the contacts and discovered I could set the "default" number by either long pressing the desired number and selecting "set default" which then puts a blue check mark next to it, or I could be in the contact, press menu, then "mark as default" which opens a window where I can select the default email, phone number, etc which also will put a blue check next to the number.
Now then, all my contacts are stored on Google, nothing on the phone or SIM itself. For some reason, the default number for one of the most frequently called people in my address book will not "stick". I mark it as default, I can dial by name and it shows up correctly, but then the next time I go to do it (sometimes even 5 minutes later), it will be back to having no default number set and gives me the home number instead of mobile.
Oddly enough, the three other numbers I marked with a default number never do this to me and work every time, only the one contact entry doesn't work. I can't think of any other reasons why this is happening. My ONLY thought was that for some reason when syncing, Google keeps over-riding the marked default number. But why would it do it for JUST this one contact and not the other 3?!
Any ideas? Looking forward to thoughts. Kind of an embarrassing problem since it's so simple, but I can't figure it out...
www.google.com/contacts
Do you have more specific of a suggestion than simply giving me the site which I have already been to a couple times? The Google contacts interface doesn't seem to support "default numbers" and there is no way I could find to set a default number via the web interface. I believe the default number is an "on phone" setting. Thus, I am confused why it works on some contacts and not all.
Update: I noticed this same contact also won't upload changes to phone numbers, addresses, etc made on the phone for some reason, so this could be more of a Google sync problem. Again, it's only this one contact.
If I make changes to other contacts, they are reflected on Google's servers correctly. If I make a change to the phone number of this specific contact, after a few minutes, it goes back to what it previously was. It seems it's always pulling down from Google's servers and replacing the changes I made on my phone. It's like somehow only this contact was set to only pull down information, not upload it also. I also could not find any settings for changing the location of the "master" when there are changes or conflicts or anything like that on Google's website.
Anyone else have any suggestions? Thanks in advance.
Bump to the top, still have this issue.
Not much help here, as I'd love to know how to do this at a higher 'Google' level than just on my phone too. Are you syncing contacts with any other applications? For example, Facebook?
No, it's a stock Galaxy S4. Although you bring up another question I have had. When I have my contacts on Facebook synced "only with existing contacts", friends on Facebook still show up when I try to dial by name even though they do NOT show up in my address book. What's up with that? Is that the fault of Facebook? I seem to remember my HTC phone doing this as well, so I disabled syncing with Facebook contacts completely.
Today I tried removing the Google account, clearing the data and cache for contacts and contact storage, then adding the Google account again and letting contacts sync. I then set default numbers for 5 phone numbers. 10 minutes later, all but the one contact I have had problems with still had the default number set. The one contact cleared the default number - again. I just don't get it...
02CWRX said:
Hi all, just a strange issue I am having I hope you can help me. I noticed when dialing by name when new, this phone kept wanting to bring up the home number when I want to dial the mobile by default. So, I headed into the contacts and discovered I could set the "default" number by either long pressing the desired number and selecting "set default" which then puts a blue check mark next to it, or I could be in the contact, press menu, then "mark as default" which opens a window where I can select the default email, phone number, etc which also will put a blue check next to the number.
Now then, all my contacts are stored on Google, nothing on the phone or SIM itself. For some reason, the default number for one of the most frequently called people in my address book will not "stick". I mark it as default, I can dial by name and it shows up correctly, but then the next time I go to do it (sometimes even 5 minutes later), it will be back to having no default number set and gives me the home number instead of mobile.
Oddly enough, the three other numbers I marked with a default number never do this to me and work every time, only the one contact entry doesn't work. I can't think of any other reasons why this is happening. My ONLY thought was that for some reason when syncing, Google keeps over-riding the marked default number. But why would it do it for JUST this one contact and not the other 3?!
Any ideas? Looking forward to thoughts. Kind of an embarrassing problem since it's so simple, but I can't figure it out...
Click to expand...
Click to collapse
I have the same issue and it ticks me off every time, and it happens with any contact that has multiple numbers. There doesn't seem to be any way to choose the alternate numbers when you do search by name from the dialpad. you have to do it from the favorites or the contacts tab instead.
Does yours clear the default from EVERY contact that has multiple numbers? Mine only clears the set default number from ONE SPECIFIC contact, and I can't figure out what the difference between that contact and any other contact is. Or, if you are saying you can't figure out how to set the default numbers at all, I gave instructions on how to do it two different ways in the post you quoted.
As for selecting an alternate number from the dial pad, I figured that out too. So, let's say you want to call Mike. Dial 6453 (MIKE) and you should see the name pop up. To the right of the name is a down arrow with a number above it. The number is telling you how many contacts what you have dialed matches. Tap the down arrow and you will see a list of people and their numbers under them (or just the one person if that's all that matches). If you tap again on the name, you will in fact be given a choice on which number to dial (assuming the contact has more than one number saved for them).
So basically, it's a long annoying process that shouldn't have to happen, but it is possible to do it. You have to start dialing by name, then make a screen selection, then another selection, then another, then finally the dial pad is pre-filled with the number, but then you have to remember to hit the actual call button at the end of all that crap. I find it's easier to find a text from the person and swipe the screen to dial them that way sometimes (or from within the text tap the call icon), or from the call history tap the call icon. Or of course as you said, favorites or contacts.
My HTC used to just let you dial by name, tap the number you wanted, then it would start calling. Easy peasy.
Bump to the top again... Still trying to figure this out. So annoying.
Bump. I dial this number every day...
Some stupid questions: 1. Do you have more than one contact details of the same person? 2. Did you delete and re-add the contact. Also delete from all other syncs?
Sent from my Nexus 7 using Tapatalk 4 Beta
The contact is only listed as a Google contact, and has no other links or connections from other sources. Facebook is not synced, nor is anything else. It's only Google contacts. I haven't tried deleting and re adding yet. I guess that's a simple thing to try, its just that there is a lot of info in there, haha.
Ok, via web browser on the PC I exported the contact, deleted it, and synced my phone. Contact was gone. I then added a contact via web browser, typed in all the same info, synced the phone, and the contact is back. I then selected the mobile number, marked it as default, synced the contacts again, and there was no longer a default check mark next to the mobile number.
I have at least 3 other contacts where I don't have this problem at all. They are all stored on Google, they are all friends on Facebook (even though they aren't linked to FB in the contacts because of the above listed problem where everyone on FB shows up when dialing by name), they are all in circles on Google Plus. I can't figure this out at all. What the heck...