Related
Is anyone else having the problem where after a soft reset(or a manual shutdown/restart) touchflo3d doesn't autostart?
It happens to me about 50% of the times I reset, but I jus thave to switch it off again and on again and usually it works fine.
Totally different, but I have this sometimes with Touch Flo 2D on my TyTn II. I usually get it if I've installed to much, It always launches if I haven't got the Micro SD card in though.
I've had this happening to me since I got it, and after a few hard resets it still happens... Seemingly at an increasing frequency too.
Yup, I'm experiencing the same problem.
It's really annoying, and more people are having this issue.
There's already a thread about this.
What works for me most of the time is this:
- Disable TF3D in settings.
- Soft reset device with power button
- Enable TF3D again
- Sometimes TF3D starts now, but if not reset again.
I can't wait for a more stable and fast cooked rom
Hope this helps
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
aiaob said:
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
Click to expand...
Click to collapse
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
i have had this happen a couple of times as well.
quarintus said:
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
Click to expand...
Click to collapse
I doubt it's caused by that. I've hard reset it installed core and tomtoma nd had it happen..
and I'm sure it's not just slow to start up, I've tried making calls and simply leaving it for 10 minutes and it still doesnt start up.
It only started haooening to me after I instaled software.
I guess the best thing to do right now, is to install all software with touchflo disabled, then reboot completly the device to finalize the instaltion, and then reboot it again. Now you can reactivate Touchflo again.
This "trick" has worked perfectly on my Pro 2
HastaSSSS
disable startup
Many programs that you install will leave a startup file in the windows\startup directory. Try cutting and pasting them to some temporary directory. I did that with poutlook and slovoed and the problem has gone away for me, without in any way impairing my calendar/contacts or slovoed functioning.
I got the same problem too.. soft resetting a few times do it or disable/re-enable on Personal-Today Items screen
Kinda annoying
Same problem here. Spoke to HTC today and tol them there were more people having this problem. Mine is so serious that it won't start at all! HTC says I was the first and ONLY one in the world with this problem. They told me that if there were more people having this issue they should CALL HTC. It's free to call them... please do so in finding a solution!
Thanks!
I am suffering under the same issue! It is really annoying! HTC should immediately sovle this problem!
Sounds a bit like my thread here: http://forum.xda-developers.com/showthread.php?p=3950507
I copied manila.exe from windows to my start-up folder, now it works fine.
yeah i have the same problem its really annoying. it works about 90% of the time now when i copied the manilla.exe to start up folder. before that i tried to put the phone in airplane mode before booting but that worked like half of the time.
Schijthoos said:
I copied manila.exe from windows to my start-up folder, now it works fine.
Click to expand...
Click to collapse
Does the time on the tf3d homescreen update ok when you use the manila.exe shortcut?
touch flor not loading
My phone is hanging again. I can't get it to load Touch Flo 3D. I get this message that it's trying to activate handsfree network and then it says connected and reboots and goes through the same thing 2 or 3 times. I hard reset back in Dec cause of this and then the same thing happened again about a month ago and out of the blue it loaded touch flo and fixed itself.
But this time it's been a couple days and my phone is so slow it's crazy. It's been trying to remove one program for 20 minutes. I thought removing a few programs might help instead of doing another hard reset but it looks like i'm gonna have to do one more.. I haven't added anything new lately. And I even got a message saying your phone can not boot up because of a program from an untrusted source or something else and it wants me to hard reset. It says press volume up to reset or any key to continue and then it goes to that hands activation screen.
Iv'e tried enableing and disabling bluetooth. Sprint store said I have a bad phone cause of that hands free actication message I keep getting and they want to order me aother phone but it's going to be a refurb so I guess i'll hard reset.. Something is causeing it to hang and not load and I don't know what it is.. But I came here and I tired puttingmy phone in airplane mode and rebooted nothng. I have unchecked and checked touch flo and rebooted..
But I went to windows and saw manilla.exe cause you guys said copy it to start up and I clicked on it and I saw my background and clock again but I don't think Touch Flo fully loaded and my task manager wasn't at the top and I ran clean ram cause it was still slow and it said it freed up 32mb but then my screen went black again. I put it in airplane mode once more and took out the battery. But when I never pasted the manila to start up should I do that? I just clicked on it and saw where my clock and background were back but my clock was off by like 15-20 minutes.. I'm sure I'll probablyt have to hard reset but wanted to ask around a couple more times before doing one.. Rose
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Same thing happened to me.. Touchflo wouldn't load phone was so slow hands free message kept coming and saying connected and rebooting. I did a hard reset and was good for a couple months then out of the blue on day it did it again. I turned off phone and left battery off overnight and just got lucky and the next day as I was getting in my car it came back on.
But then a few weeks later it did it again and I took it to a Sprint store. I was told that the handsfree activation is something that only happens once when you 1st get a new phone and they said my phone was defective. They were going to order me another one but it was going to be refurbed so I never picked up and just dealt with a hard reset once again. Don't know what causes this but I've had my phone reset for over a week and I just now tonight started putting apps back on cause I was afraid ut had to do with something I installed I really don't know what causes it.. But my touchflo wouldn't load at all compeltely black screen no today screen at all and boy was my phone slow. I went to windows and clicked on manilla.exe also and saw my today screen but it was still slow and not completely loading up to touchflo like you said. And then I read about putting it in airplane mode turning off BT nothing worked for me this last time so I did a heard reset again..
Maybe someone else knows what causes this but I'm leary and am not going to put everything back on my phone that was on there but I've put most everything back.. Sorry I wasn't much help but same thing for me hands free siad connected and would reboot and over and over.. I kind of want an Android phone now and I don't think Sprint should of offered me a refurb when I just bought this in Sept and it's an expensive phone. But oh well things happen.. Good Luck!
killerz298 said:
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Click to expand...
Click to collapse
Hi folks, I've lurked here for quite a while and gotten some invaluable info; so first off thanks for all of the contributions from the gurus here!
Now, I have a pretty strange issue that I haven't been able to find an answer on anywhere. I'm hoping that someone can help me sort this.
The background story:
My wife has a MyTouch 3G Slide that I bought for her back in July. Last week she managed to drop it in some water. It DID NOT get fully submerged since the water was very shallow. However, it did get a slight amount of intrusion. She pulled the battery in a relatively quick amount of time and we let it sit in a bowl of rice to dry out for a couple days.
The current deal:
When I felt the phone was sufficiently dried after a few days, I fired it up. It took a very long time to get out of the MyTouch splash screen and loaded noticeably slower than normal. Once in, the phone functioned perfectly normal. Absolutely no issues at all with any functionality once you get past the security pattern.
However, whenever you put the phone to sleep, it does some funky stuff. The screen goes black for a second and then comes back on, ready for you to swipe down and then enter the security pattern again. Then it will go black again. Then it comes back on. It just continues to do this, never stopping. Sometimes it will go to the security pattern screen too.
So I figured this may have been some hardware issue since it was acting like someone was just repeatedly pressing the power button. First I wanted to try a simple reboot though. Upon rebooting, the phone would not get past the splash screen. It just froze there.
I pulled the phone apart to see if maybe there was some corrosion on the PCB from the water intrusion. Everything looked fine, but while I was in I did a little wipe-down with some alcohol, then I put it back together. After multiple attempts, I was able to get it to boot again. But the boot process was still VERY slow. Occasionally, it would boot into safe mode as well. But when it booted normally, everything would always function great once logged into the phone. This convinced me that it wasn't a hardware problem since the phone would not cut into sleep mode or anything when logged in. It worked perfectly fine. So I figured that maybe there was some sort of corruption that occurred in the software.
So I tried a hard reset. Didn't fix it.
Then I figured that maybe I needed to do a reflash. So I rooted the phone since the water plunge voided the warranty anyways. Once rooted, I flashed TeamFenix 1.7.1 successfully.
But the phone still only fully boots intermittently, and the boot process is still slow. It also has the same problem in sleep mode which is killing the battery fast since the screen is pretty much constantly on. But once in, the flashed ROM works perfectly just like the stock ROM.
Video of the condition:
Since I'm new, I'm not allowed to put any links in my post. But if you type in the string below after the YouTube url, you'll see a quick video I posted of the condition.
watch?v=dX55URtaRHo
So it seems that there is some crazy issue only upon bootup and when the phone is put to sleep. Can anything be done to fix this? Is there a way to locate and fix corrupted software? Any and all help is appreciated!
Sorry for the self bump. Any devs out there have any suggestions? I gotta get this thing sorted.
If its happening on both stock and teamfenix, I'm pretty sure it's a hardware issue. Flashing a rom completely replaces the software, so it doesn't sound like its that.
Sent from my T-Mobile myTouch 3G Slide using XDA App
It actually seems like a problem in the power button. Did you check the contacts for the power button? Repeatedly pressing the power button will first lock it initially and dim the screen. Press again, then it gives you the chance to unlock. Press again and it goes back to sleep. Wash rinse repeat...
Yes, I understand. But if it were an issue with the power button, when you logged into the phone, it would randomly put itself to sleep. It doesn't do that, it functions perfectly normal with no errors whatsoever when you are logged into the phone. This problem is only exhibited in sleep mode which would rule out a hardware issue with the power button.
Title says all. I was just chillin' listening to some music (Let's Get It to be exact) and when I pressed my power button to check and see how fast the WiFi reconnects, I swiped up and nothing happened. It was like that for about a minute or two, the volume rocker worked and I could hold down the camera button and go to the camera, but the touch screen just wouldn't work. I popped off the back and was about to remove the battery and thats when everything went back to normal...pretty odd...just a heads up.
Wifi now reconnects instantly. I am pleased
strange... not had any problems like this at all on mine yet...
Seems VERY responsive, been using it all lastnight over and over and this morning.
what phone you have? im using the mozart
Keefo said:
strange... not had any problems like this at all on mine yet...
Seems VERY responsive, been using it all lastnight over and over and this morning.
what phone you have? im using the mozart
Click to expand...
Click to collapse
Dammit, I thought I said what phone I was using...I'm on the HTC Arrive. It hasn't done it since I've posted..I highly doubt it'll happen all the time (probably won't ever happen again)..just wanted to mention it.
This happened to my arrive right as it was done updating on the screen that says the update is done...the close button wouldn't work, but I remember reading this thread so I waited it out and it started to work after like 2 min
I am having the exact problem on my HD7, only seems to occur if I am listening to music. The lock screen appears, but I cannot swipe.
Mine doesn't always come back and I have to remove the battery.
I have the same issue every once in a while. I'm not on Mango though, I'm running NoDo on a HTC Surround.
It's happened about 5 times in the last six months.
I've had the same issue since before NoDo. The quickest fix is to try turning the screen off and then on again, sometimes it takes a few attempts but it normally works.
haven't noticed on dvp or anything I wonder if its a htc thing...
I haven't noticed it, though I did get the red screen associated with changing the reg entries to get 32 bit color one.
Interesting side not, when I was updating to Mango, on one of the reboots I got the red screen and thought I was screwed, but the update process continued and on the next reboot it was normal again...
ms79723 said:
Title says all. I was just chillin' listening to some music (Let's Get It to be exact) and when I pressed my power button to check and see how fast the WiFi reconnects, I swiped up and nothing happened. It was like that for about a minute or two, the volume rocker worked and I could hold down the camera button and go to the camera, but the touch screen just wouldn't work. I popped off the back and was about to remove the battery and thats when everything went back to normal...pretty odd...just a heads up.
Wifi now reconnects instantly. I am pleased
Click to expand...
Click to collapse
nope havnt come across this yet on my Samsung Focus. The only issue seems to be the increased boot up time(phone stays on d Samsung logo screenfor a long time) but I am quite sure its due to Samsungs crappy bootloader and besides I hardly have to reboot WP7 ever anyway
Hey, has anyone else noticed that weird icon where your signal and data icon should be?
Idk if its the new icon for no signal or what...but when I unlocked my phone, I saw an icon that looked like the copy and paste icon where my signal and data icon should be.
I must say I'm noticing this on third party apps a lot, I don't know whether it's because they are downloading data from the Internet or what but it's happening quite a bit at the moment. LG Optimus 7 btw.
I bought a Samsung Glide i927 phone last month in the US, i bought it unlocked as i am from argentine, and i wanted to use it with movistar.
Recently the phone started to crash a lot, by that i mean that the screen starts going white, with horizontal lines and pixels of different colors appearing, then just turn off or restarts itself, only to crash again as soon as it starts an then turns off.
When this happens i try to start the phone and select the shut down option myself to see if the next time it starts it doesnt crash. But sooner or later it happens again.
This problem its happening too often, and not while doing something in particular like running an app or something. Sometimes it crashes just by plugging it to the power adapter, it even shows the white screen with the lines instead of the charging battery image when i charge it while turned off. I have already try to fix it upgrading android or doing a factory reset, but that didnt work.
Anyone have any idea of how to resolve the problem, or if its a hardware malfunction that cant be fixed?
To make things more difficult, as i said earlier im from argentine, and i cant go to AT&T or Samsung to get it fixed or get a replacement. English is not my first language, so please forgive my orthographic mistakes.
Thanks
This really sounds like some hardware problem, but to be safe, learn how to use Odin and use it to revert your phone to completely stock condition (cleaner than factory reset).
Sent from Samsung Captivate Glide @ CM10.1.2
AndyYan said:
This really sounds like some hardware problem, but to be safe, learn how to use Odin and use it to revert your phone to completely stock condition (cleaner than factory reset).
Sent from Samsung Captivate Glide @ CM10.1.2
Click to expand...
Click to collapse
I tried to do that, but the first times when Odin try to reboot the phone it just freezes and i have to unplug it. After many tries it finally finished, but the phone keeps freezing and crashing.
The phone even crashes while turned of and conected to the power adapter.
Do you think that with LiteROM 0.9.0, that might fix this issues?
I've got reboots too, try to disable auto brighness
It helps for me
Sent from my SGH-I927 using xda app-developers app
Power button issue
I am having a similar problem. At first, it just happened on rare occasions. However, today, it started doing it repeatedly. The phone was unusable. I did some checking around, and it appears that the power buttons on Samsung phones are prone to sticking. Some people suggest you actually remove the battery and slam the power button against a table. I wasn't going to do that, because I could just see it doing even more damage. What I did instead was firmly tap the power button repeatedly. It seemed to unstick the power button and allow the phone to function again.
Another alternative is to have the power button replaced, but that might be a hassle.
First of all, sorry for my bad english.
I bought it on amazon a few days ago, I have the same problem...
I thing aznemesis is right, because my power buttom is very sensitive, in fact, some times, when I press the button smooth and fast, to turn off the display like, the typical menu appears as if I had pressed the button for much longer period. Which proves your theory. The problem is if I hit the button over a table and the button breaks here in Chile do not exist spares of the terminal
Well, I did. I couldn't stand the desire to do so. After nearly 18 hours, the terminal isn't rebooted again.
Panchon1978 said:
I bought a Samsung Glide i927 phone last month in the US, i bought it unlocked as i am from argentine, and i wanted to use it with movistar.
Recently the phone started to crash a lot, by that i mean that the screen starts going white, with horizontal lines and pixels of different colors appearing, then just turn off or restarts itself, only to crash again as soon as it starts an then turns off.
When this happens i try to start the phone and select the shut down option myself to see if the next time it starts it doesnt crash. But sooner or later it happens again.
This problem its happening too often, and not while doing something in particular like running an app or something. Sometimes it crashes just by plugging it to the power adapter, it even shows the white screen with the lines instead of the charging battery image when i charge it while turned off. I have already try to fix it upgrading android or doing a factory reset, but that didnt work.
Anyone have any idea of how to resolve the problem, or if its a hardware malfunction that cant be fixed?
To make things more difficult, as i said earlier im from argentine, and i cant go to AT&T or Samsung to get it fixed or get a replacement. English is not my first language, so please forgive my orthographic mistakes.
Thanks
Click to expand...
Click to collapse
The horizontal lines on the screen sound as if it is an overheating issue. What were you doing before your phone shut off? Are you using the factory charger?
cure found
take the battery out...blow on the power button with some compressed gas to get the dust out....then pour a drop of silicone based lubricant on the power button so that most of it gets in the gaps...then hit the power button a few times....haven't had any reboots since then
Two days ago, my T-Mobile Samsung Galaxy S3 dropped out of my coat pocket as i was running for the bus. I picked it up and saw the screen was cracked along the top left and bottom left hand side. Everything was working for the past two days and i figured i'll just wait till Christmas to get a new phone. This morning i took my phone off the charger and turned it on. The Samsung logo flashed, and then the boot animation for Slimrom (the custom rom i'm currently running on) flashed for about a second but then the screen went black. I did a battery pull but the weird thing is whenever i put my battery back in, even without touching the power button, it boots up by itself but then the screen goes black again. I can access TWRP and download mode but they both go black after a few seconds as well. I was able to successfully turn on my phone and have it fully function for about 15 minutes after putting it back on the charger, but it quickly blacked out again. It also keeps randomly booting up by itself which is weird. Im guessing this is a problem with the screen itself, but could it be a software issue because the device keeps booting up by itself? If it is the screen, will i have to buy a new one or is it not worth it? I've also tried using a different battery and i have the same issue so it can't be that. Any help is appreciated!
Sounds like an issue with the power button, it probably got stuck somehow either when you dropped it, or after you dropped it. Do a simple search for power button and you will find ways to fix it!
Holy crap i didn't even think of that! It makes total sense since every time i even tap my power button, even for just a second, it turns on. I've read around that clearing the cache or a factory reset could work. Is this true?
Unlikely, unless it's a software issue but it's always a possibility. Slam the phone against something to try to get the power button back into place, or open it up and try to see if you can fix it yourself, or replace it
The problem seems to be gone. I haven't had any issues for two days now. All i did was press the power button really hard multiple times. Thanks for you help man!