Hello All,
I think I lost my HTC Trinity P3600 device :-( I was trying to update INDIGO_LITE & upgrade failed during half way and I rebooted the device & now it only boot to white screen. If I try to reload another rom it's keep saying rom is corrupted.
Any help will be really appricated
Thanks,
Ankito
k a few questions for you..
1) did you have hard-spl installed?
2) can you enter bootloader manually?
3) have you tried to flash an official ROM from you manufacturer? (WM5 or something)
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
ankitoberoi said:
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
Click to expand...
Click to collapse
Hello,
http://www.smartmobility.nl/_BIN/TRI_DT_WWE_1234052_103_6275_1380011_108_Ship.zip
Bye
so it's an HTC product? look at the wiki, or logon to HTC's website to download the latest ROM for your device and region (europe, asia, etc).
What i meant was did you have hard-spl installed before you flashed, but i'm guessing not since you have the new bootloader. You really need to read up and protect your device before you flash.
Try to find an official ROM and see if that works first..
Thx jotam
Phone start working again. Do you guys recommand any 6.0 rom which I should use? Should I wait for HTC to come up with offical rom?
Thanks,
Ankit Oberoi
htc has official rom already.. just try and see what you like, but pdaviet and indigo are good for me.
make sure you have hard spl installed before you flash again. You can follow the guides here if in doubt.
Hello,
My model ID disappeared from my phone and now I cannot upload anything to it anymore.. It happened while updating to spl 1.40 Olinex... Does anyone have an idea how to upload a Rom without the need of a Device ID? The spl has the right number (I can see that in the Bootloader screen)...
Help?
xanh said:
Hello,
My model ID disappeared from my phone and now I cannot upload anything to it anymore.. It happened while updating to spl 1.40 Olinex... Does anyone have an idea how to upload a Rom without the need of a Device ID? The spl has the right number (I can see that in the Bootloader screen)...
Help?
Click to expand...
Click to collapse
This has happen to my phone as well can you go to bootloader mode and write down all the details here, we might have to contact ccmonex/olinex if its the same which happpen to me,
xanh said:
Hello,
My model ID disappeared from my phone and now I cannot upload anything to it anymore.. It happened while updating to spl 1.40 Olinex... Does anyone have an idea how to upload a Rom without the need of a Device ID? The spl has the right number (I can see that in the Bootloader screen)...
Help?
Click to expand...
Click to collapse
hey. dutty showed me this thread drop me a PM and we can try and fix this.
basically we'll first try to write your modelid back, if that doesn't work, then the last option is flash an SPL that ignores modelid.
cmonex said:
hey. dutty showed me this thread drop me a PM and we can try and fix this.
basically we'll first try to write your modelid back, if that doesn't work, then the last option is flash an SPL that ignores modelid.
Click to expand...
Click to collapse
thanks for responding so fast hope it isnt that bad like it was mines
Thanks for your quick reply's..
Here's my info:
MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
If I take out the battery I can see DIAM100 in the case...
xanh said:
Thanks for your quick reply's..
Here's my info:
MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
If I take out the battery I can see DIAM100 in the case...
Click to expand...
Click to collapse
just pm cmnonex and she will guide you
Another problem is with mtty..
When I start up the program and my phone in boot loader, then mtty crashes immediately when I press a button.. If I disconnect usb and reconnect it again I can type stuff in, but I can type in text without anything happening..
I'm starting to give up on this phone. Maybe I should start seeing it as a expensive pda..
i have the same issue .. me phone is freez then i have to remove battery out .. and restart again ... BUT ... everything is gone ... i cannot doing anything with it ....doesnt matter what kind the rom i upgrade .. still came bootloader ONLY ... i have read many thread about BRICK ... but nothing could help ......please any advise .... HELPP..... please
First of all :
Relax
Got a new diamond today and had the same issues.
What Windows OS are you using ? Do you use WDMC or Activesync ?
What is the driver version of the installed HTC Sync ?
As for mtty :
Next version of QMAT will be fine and will be much more stable than mtty.
As for bootloader :
1. Are you able to connect to mtty, and does it respond to command
"info 2" ?
If yes, fixing it should be no problem.
Contact cmonex, she will be able to help you.
If she isn't able, I and cmonex will figure out what to do next
Cya,
Viper BJK
viperbjk said:
First of all :
Relax
Got a new diamond today and had the same issues.
What Windows OS are you using ? Do you use WDMC or Activesync ?
What is the driver version of the installed HTC Sync ?
As for mtty :
Next version of QMAT will be fine and will be much more stable than mtty.
As for bootloader :
1. Are you able to connect to mtty, and does it respond to command
"info 2" ?
If yes, fixing it should be no problem.
Contact cmonex, she will be able to help you.
If she isn't able, I and cmonex will figure out what to do next
Cya,
Viper BJK
Click to expand...
Click to collapse
Thanks for quick reply VIPER ... my phone run well until i remove the battery ... everything turn out bad ....i use stock rom with is HK version 1.93.871.1
seem to me usb working fine... i can upgrade it ...but ... when is done ...only have bootloader ...First come with ::: DIAMOND TOUCH :: then black out ..when i press power button again .. coming only bootloader screen, no matter what rom i try ... still in bootloader mode.........please help .......
was a double message
viperbjk said:
First of all :
Relax
Got a new diamond today and had the same issues.
What Windows OS are you using ? Do you use WDMC or Activesync ?
What is the driver version of the installed HTC Sync ?
As for mtty :
Next version of QMAT will be fine and will be much more stable than mtty.
As for bootloader :
1. Are you able to connect to mtty, and does it respond to command
"info 2" ?
If yes, fixing it should be no problem.
Contact cmonex, she will be able to help you.
If she isn't able, I and cmonex will figure out what to do next
Cya,
Viper BJK
Click to expand...
Click to collapse
Hi Viper,
Thanks for your reply,
Unfortunately qmat crashes too when I try to send it a command... The version I use here is v395..
I'm using Activesync 4.5.. But this has been disabled...
After a while windows tells me that it finds an unknown device when in bootloader..
The OS is still working and is a HK version 1.93.871.1 as well..
Although I don't know if the OS part is fully ok, since after a hard reset the extra programs get installed and the phone crashes on installing opera...
Could it be that the bootloader itself is not functioning properly making all the tools crash?
My idea is to change the id of the phone to be able to upload a new SPL, and upload a original ROM... At least it should work again then... But I've been trying for more than a week now..
Thanks..
Xanh, which spl is now installed on your device ?
If it is the Hard Spl, try manualspl to reflash spl again. I guess SPL is broken.
Normally, you don't need to change the ID for that.
Changing the ID is only needed when flashing a ROM other than your
original one.
k3vin168 : Also try to reflash SPL. If you've done that and it did work, please contact me via PM. Then either your nand is bad or you need to change the bootmode.
Cya,
Viper BJK
SPL is 1.40.OliNex, but I don't need to change the ID, but it's missing since failing installing 1.40.OliNex SPL.. How does this manual SPL upload work?
No matter which update I try, it will always say that Device ID is wrong... I think NAND is somehow bad, since that's where the device ID is stored right?
xanh,
Could be that nand is bad. There are two regions where the device id is stored.
Memory and NAND. But both can be fixed using Hard SPL (MFG).
PM me, I'll try to help you out of your misery.
k3vin168 said:
Thanks for quick reply VIPER ... my phone run well until i remove the battery ... everything turn out bad ....i use stock rom with is HK version 1.93.871.1
seem to me usb working fine... i can upgrade it ...but ... when is done ...only have bootloader ...First come with ::: DIAMOND TOUCH :: then black out ..when i press power button again .. coming only bootloader screen, no matter what rom i try ... still in bootloader mode.........please help .......
Click to expand...
Click to collapse
Any progress on this one ?
If not, please PM me
xanh said:
SPL is 1.40.OliNex, but I don't need to change the ID, but it's missing since failing installing 1.40.OliNex SPL.. How does this manual SPL upload work?
No matter which update I try, it will always say that Device ID is wrong... I think NAND is somehow bad, since that's where the device ID is stored right?
Click to expand...
Click to collapse
he meant SSPL-Manual.exe from the hardspl thread, but I don't think that would fix mtty.
anyway, have you got my PM. if mtty is hopeless, the other route is what you need (flash SPL without modelid check via special no checking SSPL). I sent you all links and instructions.
(I'd rather not make the files public or all the noobs will start flashing random devices' roms.)
EDIT: I assume your OS is able to boot, but if not, then you need a different set of files, let me know
viperbjk said:
xanh,
Could be that nand is bad. There are two regions where the device id is stored.
Memory and NAND. But both can be fixed using Hard SPL (MFG).
PM me, I'll try to help you out of your misery.
Click to expand...
Click to collapse
for duttythroy, we could not write the modelid back to nand for some reason. lnb said success, then it was still not there in the flash when reading it out afterwards. so I just had him flash a "special" spl
k3vin168 said:
i have the same issue .. me phone is freez then i have to remove battery out .. and restart again ... BUT ... everything is gone ... i cannot doing anything with it ....doesnt matter what kind the rom i upgrade .. still came bootloader ONLY ... i have read many thread about BRICK ... but nothing could help ......please any advise .... HELPP..... please
Click to expand...
Click to collapse
what is your SPL version in tricolour screen?
cmonex said:
what is your SPL version in tricolour screen?
Click to expand...
Click to collapse
i use same as other 1.40 i try all VIPER try to help me out ... but all not working ....just stuck in splash screen ..i try all kind of ROM but still stuck ...i can i do ?? please help
Dear Friends;
I've done HardSPL and installed Cooked ram (downloaded from XDA) several times, but recently I heared that by installing non-original ROMs the Guarantee will be invoked. It is easilly possible to back to original ROM but is it possible to back to original CID lock as well? I dont want loose the Guarantee....
I will be appreciated if the firends kindly help me.
Best Regards
Darius
As far as I know you can go back to your original SPL, but dont quote me on it.
Wait for a better answer from someone more experienced.
at the same place where u got the hard spl, the author probably provided the stock spl for warranty purposes.
so what u need before u send it back to service is:
stock spl, stock rom, and stock radio (probably u remember which came with it).
any ways, just read the hard spl thread, and u have the answer.
don't do nothing without first reading what u are doing
easy!
hi, simply install an ORIGINAL HTC rom and it return with rom and original CID.
Bye, felix
AFAIK installing another rom also the HTC default ones are not giving back the CID when u unlocked it, if you wrote the CID down you can do it with the CID unlocker of OliNex there u can write in the CID u want to set.
The problem with stock SPL is dicussed many times ! a whole thread is there for that.
Greets
ps. http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
Step by step guide is here post #39
http://forum.xda-developers.com/showthread.php?t=400950&page=4
Back to Original SPL
Dear Friend;
I've done all steps and successfully installed stock SPL 1.93.0000 but in bootloader v0x32 is mentioned while it seems it should be v0x30 (as smae as my friends' Diamonds), anybody knows how can I fix it?
Regards
Darius
i have O2 Xda diamond, when i restart the device i can see the following details:
R 1.00.25.05
G 52.29.25.12 H
D 1.93.00.00
i wanted to install WWE ROM so i decided to install Hardspl 1.4 from the Olipro thread in this forum.
but while doing update it showed the version as "1.30" and when the update was complete it automatically hard reset my device!! (i had followed the hardspl update guide on "modmydiamond", where it says that device will only be soft reset after update.
i also cant enter bootloader by pressing "vol down+ reset " key and my phone simply restarts when i do this and shows the same info as before the update on the initial screen.
can anybody tell what is going wrong here? as i want to conform hardspl is there before i proceed to ROM update.
i am a noob and any help is greatly appreciated.
Please post any problems in the relevant Hard SPL thread.
Thread closed as per forum guidelines: http://forum.xda-developers.com/showthread.php?t=221545
Ta
Dave
my phone goes to bootloader...
but i cannot flash to any rom iy stop ay 2% my battery is good...
i try to hard reset but nothing happens..
its only show..
IPL 3.13.0001
SPL 3.13.0000
nothing i can see the OS and the GSM?
i try to use the USPL but same nothing happens...
Please help....
Up up may thread..........
HELPPPPPP............
upping your thread after 22 minutes between topic post and next post isnt appreciated i guess
looks like you didnt unlock it correct, did u try the normal USPL and USPL cmon? maybe the flash with uspl cmon works for you?
goodluck with that
bricked!lol
you need to find the official rom for your device..
once you have got that you can bring it back to life, uspl and flash a new rom.
without official rom, its a brick!
uspl cmon lets you flash any p3300/artemis rom..
normal uspl will sometimes fail on 3%..
uspl - spl 1.11.0000
uspl cmon - 1.11.cmon
help please,
need the original t-mobile Mda Compact Rom!!!
can`t flash other roms.
when i want to flash it shows me the error 300
i just need the original rom.
i can`t do nothing with my device!
please help me