Related
Microsoft have released Windows Media Player 10 Mobile but only to manufacturers. It is not, and will not be, available as an update or download unless your manufacturer provides an update or updated ROM.
I pulled a ROM update down from one of the OEMs whove done an update and could extract the files for WMP10M, but I'm not sufficiently up with the whole ROM cooking thing to incorporate them into a new ROM for my Blue Angel.
Anyone fancy giving this a go ?
Can you Zip the files and Upload here?
yeah, let the expert assist you.
I am very keen to have WMP 10 too.
just upload the ms.nbf file of that ROM and the rest is up to us.
This is a link to the ROM update for the Dell Axim x30 that contains WMP10 :
http://support.dell.com/support/dow...eviceid=6672&devlib=7&releaseid=R87096&p=HTTP
I downloaded this and used a tool (which I now cant find - doh!) to extract it.
What else would you guys need ?
Do you need a copy of my current ROM ?
If so, how do I make a copy of it ?
Sorry, that last post was me...forgot to login.
i have downloaded the file.
After extracting, i found 2 *.IMG :roll:
therefore, i try to use UltraISO or MagicISO just to extract *.IMG but it fails.
Some other experts may need to participate
I presume DumpRom will not help us.. Mamaich? :wink:
What kind of Pocket Pc have you upgraded? Dell ??
OK.
I got an iPAQ rom update from HP here : http://h18007.www1.hp.com/support/files/handhelds/us/download/22279.html
I ran it so it copied the filees onto my PC hard drive.
I then ran dumprom.exe against the d2b10110uo.nbf file and got all the files from the ROM.
I have them all in a zip file as I am not sure exactly which ones are required for WMP10M. I have zipped up and attached all the ones that look as though they are WMP10M related.
i suppose all the files has to be zip into *.CAB
and copy over to PDA and unzip it
is this all the files that belongs to WMP?
i think let the expert do some testing
bravo2zero said:
just upload the ms.nbf file of that ROM and the rest is up to us.
Click to expand...
Click to collapse
Sorry, I must hve missed your comment. The rom can be got from here : http://h18007.www1.hp.com/support/files/handhelds/us/download/22279.html
Sorry, tried to upload but it keeps failing.
Anyone tried copying the files in wm.zip to their xda2 and trying to run wmplayer.exe ?
wanna try but at work with no cradle
Locked up after a few seconds of the "wait" icon on my PDA2K running 1.31 WWE and 1.06.02 Radio.
First you are missing many WmFiles,there are many that are not begin to Wmxxxx,but unfortunately I can't remeber others.
And I think DumpRom is missing relocation on Dll files,like discussed time ago
I thought someone had mentioned that WMP10 software is "somehow" tied into the hardware or the OS specific to the devices so it wouldnt be possible to extract the executable application and make a cab or whatever and run it on any other devices that it didnt ship with...
I'm no guru with ROMs and stuff.. but if any one of you guys manages to make this work, it will be awesome!
Good luck!
i heard someone had the cab or a way to install wmp10 ... anyone here knows how?
Hi
i found a virtual WM 5 & 6 for PC. But to flash the virtual rom i need to have the rom in .bin format insteat of .nbh. Does anybody know how to transform nbh to bin ?
Download artemis touch rom from this forum, open the zipped directory, delete the .nbh original file, put in the directory your .nbh file, flash the rom with the included program.
Jake840 said:
Hi
i found a virtual WM 5 & 6 for PC. But to flash the virtual rom i need to have the rom in .bin format insteat of .nbh. Does anybody know how to transform nbh to bin ?
Click to expand...
Click to collapse
Can you please provide me a link to download it (virtual WM 5 & 6 for PC).
Thanks in advance.
http://www.microsoft.com/downloads/...A5-183A-4A1E-A7E2-CC500ED1F19A&displaylang=en
http://www.microsoft.com/downloads/...3a-a651-4745-88ef-3d48091a390b&displaylang=en
but i still dont know how to open different roms
Thanks. I 'm currently downloading this. I 'll give it a try. If I find out how to change rom I will let you know.
sorry to rez this but if anyone here knows howto install different rom in virtual wm 6.1 please tell me i would love to start editing my touch diamond but would love to start from virtual one
oh and sorry to pop this up in artemis forums if i dont get answers here i'll try asking somewhere else
i found a similar one for wm6.5. found your solution?
cool app,ts very handy to test roms.
i wish i knew how it works,im gonna check it out.
also i wanna check out how to make roms,
it looks me cool to make some
btw,try to rename the file nbh to .bin,maybe it works
This is pretty old, but did anyone success in using an NBH rom in WM6.5 emulator? If so, how?
Ambious said:
This is pretty old, but did anyone success in using an NBH rom in WM6.5 emulator? If so, how?
Click to expand...
Click to collapse
+1!
I would love to know how a cooked ROM .NBH can be used with the emulators
Hi for all,
Sorry for my bad english. Today I initiated a process of creation of a clean rom for the Trinity. Some suggestion?
I am initiating my rom from the image of the Windows Mobile SDK.
Thanks for all
ivcarlos said:
Hi for all,
Sorry for my bad english. Today I initiated a process of creation of a clean rom for the Trinity. Some suggestion?
I am initiating my rom from the image of the Windows Mobile SDK.
Thanks for all
Click to expand...
Click to collapse
why use windows mobile SDK, when you have all you need into real roms???
Clean ROM
Hi ervius,
I look a rom in the style of Korand 3,1 (WM6.1 Clean, without modifications or customizations) and didn't find none... therefore I am trying to make a proper one... I obtained disassemble the archive "bin" that he consists in the Windows Mobile SDK... now lacks to know accurately what to modify in this.
I need a ROM standard, only with the essential (CommManager, Phone) and some utilitarian packages (PIM Backup, Hibernate, SQL Server, Adobe Reader, RAR) without modifications of themes, splash screens (Windows), etc. Therefore I decided to disassemble the image supplied in the SDK, that if approaches more to the one than necessary...
Any suggestions?
Hi I have just re-installed windows XP and now i get an error when extracting the XIP in all kitchens i have win XP sp3 with all M$ updates,
It was working before i had to re-install, maybe i am missing some DLL/Installed software somewhere but i cannot seem to find any mention about needing any additional software to be installed
Please help
thanks
Try
Try with this, it work good for me
http://forum.xda-developers.com/showthread.php?t=483899
Thanks but i would still like to find out what is causing this?
I am extracting the same rom as before i re-installed (vic's diamond 3.4)
if i take an ROM folder with xip inside kitchen works fine (Cooking)
but i cannot extract the xip from a nbh with kitchen but the packages are created ok (SYS & OEM)
still looking for help please......
sorry for the bump but i am getting desperate...
Hello, I'm new here, and I have been attempting to make two custom ROMs for the HP iPAQ 21x series, and I ran into a huge problem. I have two dump folders, and I can't figure out how to turn either of them into an NBH(or NBF) file. Any help would be highly appreciated.
Edit:Oh, and also, in case anyone was wondering, I'm trying to make them a Windows Mobile 6.1 ROM and a Windiows Mobile 6.5 ROM, and they are both(as far as I know) clean, except for the HP stuff.
nbh or nbf... ? for what ? it is inpossible to flash it back, you need bldiag.nb0 and hpimage.bin (foxconn format) but fortunatly pdocwrite works fine, so you need to: dump or download dump of imgfs (part02, os) unpack it via imgfstodump, cook to wm 6,1 or 6.5, then convert back to imgfs via imgfsfrom dump, and write via pdocwrite, xip can be also writed by this way, xip is part01, it works but i'm not a rom cooker so I cant cook it myself...
edit: it is also possible to edit marvell obm's and bootloader, but only via linux
edit2: here is my post about ipaq 214 and pdocwrite http://forum.brighthand.com/showpost.php?p=1762892&postcount=4
edit3: it will also works on any 21x and 11x and as I think on other hp devices manufactured by foxconn
I'm sorry elektrownik, but I don't really get what you're saying, I'm not very experienced with this ROM stuff, this is the first time I've ever tried to make one. But in response to what you're asking(I think), I was going to make them NBH files, make a backup ROM image of the device, and then use the HP RUU, which I have made to look for a file called 'RUU_signed.nbh'(what I will name them), to update the device via Activesync connection.
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
But how do you want to sign it for hpruu it need hp cert and key, or did you cracked it. Anyway here is default rom. http://rapidshare.com/files/2236847...n_marked_internally_with_custom_extra_data.7z
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Fdo35 said:
Oh, well I didn't know it had to be signed, but in the ROM files which I was basing mine off of(which I thought you made) was an HP digital signature file(.cer) that said it went an HP 21x Image Update, I clicked on it, Windows said it installed the certificate, and then the file dissapeared. I'm not sure if that will help use the HP RUU or not, but I found it kind of odd. Also, if you'd like to take a look at it I can put it up for download somewhere(there was another one).
Click to expand...
Click to collapse
just do what I wrote - cook wm 6.1 or 6.5 to romdump convert it back to imgfs and it will be posible to write it to device by pdocwrite application
Fdo35 said:
Update:OK, I've managed to get a little further, and now I have two BIN files, and two NB.PAYLOAD files, and I'm pretty close to turning them into NB Files.
Click to expand...
Click to collapse
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Fdo35 do you know how to flash ipaq 21x?
Maybe you can work together with some people already trying to make wm6.5 rom....
Kind regards,
W.
Steven855 said:
What parameters did you use for Tadzio's imgfs tools on NBSplit?
Click to expand...
Click to collapse
What's "parameters", I don't know what you mean. Also I don't remember using NBSplit, I started out with a IMG file which I then dumped.
Edit:Oh wait, I see what you mean. I didn't use NBSplit, I was following the attached directions to reconstruct ROM, except it wasn't for the device the file specified, and instead of 'imgfs.bin', I used a file called 'ipaq214.img', and instead of 'Windows.nb' I used a file called 'flash.nb'. And, I'm pretty sure that elektrownik made both files.
lol why you all dont read what i wrote, i have rom, which was reconstructed from dump, but it impossible to flash it from sd like on htc by flash.bin, ipaq 214 need bldiag.nb0 and hpimage.bin to be flashed from sd, but those files never was released so it is impossible to study format in which they coming, 214 can be also flashed from pc, but it need foxconn application and like before hpimage.bin, and there is official metchod - hpruu, but files which it use need to be signed first, we dont have cert and key to sign them, it wold be possible to patch hpruu to delate sign validation but i dont see anyone who working on this, as i wrote only one working metchod is pdocwrite application, i check it and it works, but i'm not room cooker so i cant cook wm 6.1 or 6.5 imgfs...
I think there are quite few topics about it.
It would be maybe better to have EVERYTHING relevant in one so everyone who posesses knowledge can help.
Now it looks that we (you) are inventing hot water... no offence - i appreciate all the hard work you put into this. But we (you) need better cooperation and clean topic.
I am grateful to everyone who share and try to make something. Respect to you all!
Kind regards,
WODP
The HP iPAQ 110 has a ROM update on HP's website, is it possible to get any of those files from that?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3644061&prodNameId=3644062&swEnvOID=4014&swLang=13&mode=2&taskId=135&swItem=hh-59617-3